How to install the start.vbs file

Similar Questions

• How to install the large data file?

  Anyone know how I can install large binary data to BlackBerry files during the installation of an application?

  My application needs a size of 8 MB of the data file.

  I tried to add the file in my BlackBerry project in the Eclipse environment.

  But the compiler could not generate an executable file with the following message.

  «Unrecoverable internal error: java.lang.NullPointerException.» CAP run for the project xxxx»

  So, I tested with a small binary file. This time, the compiler generated a cod file. but the javaloader to load the application with this message.

  "Error: file is not a valid Java code file.

  When I tried with a small plus, we managed to load, but I failed to run the program with that.

  "Error at startup xxx: Module 'xxx' has verification error at offset 42b 5 (codfile version 78) 3135.

  Is it possible to include large binary data files in the cod file?

  And what is the best practice to deal with such a large data files?

  I hope to get a useful answer to my question.

  Thanks in advance for your answer.

  Kim.

  I finally managed to include the large data file in library projects.

  I have divided the data file in 2 separate files and then each file added to library projects.

  Each project the library has about 4 MB of the data file.

  So I have to install 3 .cod files.

  But in any case, it works fine. And I think that there will not be any problem because I use library projects only the first time.

  Peter, thank you very much for your support...

  Kim

• How to install the missing dll files when I try to get latest microsoft updates and get the error msg ox8024D007

  I can also access my control panel, but when I try to add/REMOVE a program it says that is missing a required dll file

  You could try auto fixit or manually install the microsoft update agent.

  http://support.Microsoft.com/kb/949104

  Or refer to the knowledge base article:

  http://support.Microsoft.com/kb/956701

  Agent update for the x 86 system.

  http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x86.exe

  The updateagent for x 64-based system.

  http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x64.exe

  I hope this helps.

• How to install the Sidekick 98 files in Win 7 OS. I run H & S premium, 64 bit with Office 2010

  Installation of Sidelkick 98

  I remember reading about this program in some old book IT. Isn't this suppose to be a former personal information manager? I'm afraid you're not going to get this working under Windows 7 Home Premium64bits. I suggest upgrading to Windows 7 Professional using any time and download the free Windows Virtual PC with Windows XP Mode and run it via that. I would not be surprised if it is a 16-bit program.

  Windows 7 - Anytime Upgrade - frequently asked Questions:
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Anytime-Upgrade-frequently-asked-questions

  Windows 7 - upgrade Express features:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

  Before considering the upgrade to Windows 7 Professional, you can try compatibility mode:

  You can find more information on compatibility modes in the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question

  More info on Windows XP Mode:

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• I bought the version of Acrobat that allows you to edit PDF files.  I currently pay $15 / month.  I bought a new computer and downloaded the free version of Acrobat.  How to install the version that I pay $15 / month?

  I bought the version of Acrobat that allows you to edit PDF files.  I currently pay $15 / month.  I bought a new computer and downloaded the free version of Acrobat.  How to install the version that I pay $15 / month?

  Launch Acrobat, on the first window, click on "license this software" and enter your Adobe ID, associated with the subscription and password.

• I can't find a newer version of adobe flash player for ubuntu 14.04, I tried to use the apt version but it wouldn't work and I don't know how to use the tar.gz files and install, I think the current version to .deb

  I can't find a newer version of adobe flash player for ubuntu 14.04, I tried to use the apt version but it wouldn't work and I don't know how to use the tar.gz files and install, I think the current version to .deb

  Hi LF12,.

  The latest version of Flash Player for Linux is 11.2.202.400.  The current versions of Flash Player are displayed here http://www.adobe.com/software/flash/about/. The versions on the page are updated with each new version.

  --

  Maria

• How to install the latest version of the BIOS Tecra m2

  How to install the latest BIOS P000Bv160 on a M2. install toshiba BIOS instructions say to use a floppy disk, but the file size is 1.48 MB so not fit on a 1.44 MB diskette. can I use a USB?

  Are you sure that you have read the statement on the right?

  AFAIK it's win-BIOS version (windows version) and not a version TRAD (traditional), so the update of the BIOS must be running OS.

  There should be an exe file that must be executed to start the update of the BIOS!

  Please check the instruction again!

• How to upgrade the already encrypted files on the USB HDD with new XP Recovery certificate

  I backed up the files encrypted in My Documents on a USB drive on which these files are also encrypted state. My computer crashed so I reinstalled the operating system. I wanted to send records encrypted USB HD to my computer or tried to copy projecteurDu and paste them into My Documents. I could not do this because I got "an error occurred in the application...". access privilegesDo i., access is denied. "I created a new recovery certificate and put in place a recovery agent. From there how I update the previously encrypted files on th USB HDD with the new recovery certificate? I'd appreciate a step by step procedure. Can I select the USB drive in the command line and run cipher/u on this drive or make the command/u of encryption on the computer without connecting to the USB HDD

  Sorry to say that my bet is that you never gain access to these files again.

  When you created the files encrypted, Windows creates a key for decryption to access these files and stored, encrypted in your certificate store.  When your system crashed, the decryption key has crashed with it.  Without this key, you will never have access to your encrypted files.  If you have recovered from a backup image-style, you should be able to access these files.  If you've recovered by installing Windows from the installation disc, then you have created a new and different installation with different Secure ID (SID) and a certificate store empty.  A recovery agent will only retrieve encrypted files that were created after that recovery agent was in place - as a new certificate.  What you really need to do, it's your old certificate to restore the backup that you created when you started using EFS.  The following article is mandatory for anyone using the EFS file system.  Special attention to the paragraph entitled "why you should back up your certificates.

  "Best Practices for encrypting file system"
   <>http://support.Microsoft.com/kb/223316 >

  If you do not have a return to the top of your certificate, then things look dark.  There is a program called "AEFSDR' whose 'professional' version comes through what has not been overwritten on your hard drive in search of remains of certificates that could be delivered together to recover.

  Good luck
  HTH,
  JW

• How to: install the driver for scanner "visioneer onetouch 8920 usb" diskless

  Original title: is there a way to get a "driver" for my scanner "visioneer onetouch 8920 usb", other than the dish that comes with it? (I have no disc drive for my netbook)

  I recently got a netbook, the Acer aspireone running windows 7 starter edition, I have a scanner, visioneer onetouch 8920 usb. the netbook I have has no disk drive, I plug the scanner and windows cannot load the driver.  I need help to find how to install the driver, so I can use this scanner.

  Driver download page (but the latest drivers for XP - they will probably not work):
  http://support.Visioneer.com/products/8900/downloads.asp

  Troubleshoot Compatibility

  This can help with some (but not all the) programs/drivers:

  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.

  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.

  (3) after he set up see if it works properly. Note: some programs are perhaps not able to run in windows 7.

  More information on how to make older programs in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

• How to install the pixel bender plug-ins in cs5 windows 7

  How to install the pixel bender plugin in windows 7 cs5 provide in the order... How to install as an administator... like I'm the only one account on a laptop... no net group, home group, etc.. I've spent hours trying in vain to get on my Windows 7 64-bit professional version. I get a message "you must have administrator / be an administrator"... When I check my diary says it: I am an administrator... Of course, my problem is the OPERATOR. I have checked/google and many other people have the same problem... but the solution is still affirmed as an admintrator do? I have the 64-bit file in my DOWNLOADS, but cannot be in PS CS5 filters. Thanks in advance.

  Find the extension manager cs5 in the start menu > all programs list, right-click on the plugin Manager shortcut and choose Run as administrator.

  Then the extension manager, click on install and navigate to the file bender.mxp pixel.

  

• How to install a start button on your new computer Windows 8.

  In the latest versions of Windows, we had a start button for quick reference on our computer programs. Windows 8, this feature has been removed and replaced with the splash screen.

  For those of us who are not ready for this jump, you can add similar functionality of the Start button on your desktop called HP Quick Start Application screen.

  Here is a link that will guide you step by step on how to install the function of the start button.

  HP Quick start application

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  Nice day.

  I hope it's useful!

  Nice day.

• Satellite L655-1FO - how to install the audio driver?

  How to install the audio driver on my l655 1fo? I download the driver of toshiba, but it cannot start. Can someone help me how to install it on Windows XP. Thank you

  Hey,.

  Before starting with the installation of the driver it is important that you install Service Pack 3 for Windows XP, because it contains important updates for cards high definition sound. Otherwise, you are not able to install audio driver.

  Download & install SP3 and then you can start with the driver installation :)

• How to install the theme for Windows XP Professional

  How to install the theme for Windows XP Professional?

  Hi Shubham,

  The Microsoft Download Center a lot of themes, or you can use your favorite search engine to search the Web for more themes of third-party websites.

  Note:   software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, you can consult the following articles:

  Make Windows XP as you wish

  Resources to configure desktop themes in Windows XP

  Create your own desktop theme

• How to install the free trial version on a second computer?

  How to install the free trial version on a second computer?

  Download the 2nd computer installation files.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 10, 11, 12, 13. 9,8,7
  • Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• How to pass the start settings in starting a virtual machine?

  How can I use PowerCLI to start a new Linux VM and the nucleus of some startup parameters?

  What would be more simple: (a) to make and use a virtual machine model, or (b) to boot from an ISO image, or (c) start with a Linux VM and the clone who?

  The basic Linux is RedHat on an ISO on the network (ISO can be on a local path running the PowerCLI script if necessary).  If a model would be easier then a diagram how to make one of my ISO would be great!

  RedHat Linux can be configured by passing parameters of the kernel startup, so kickstart configures the system, something like

  KS=/my/path/KS.cfg otherparams

  where KS.cfg says kickstart what to do.

  How to pass the start settings in the new virtual machine?

  (It is probably completely irrelevant, but I work with Xen using bash scripting and)

  $UUID = xe model vm-install = "RedHatLinux64bit."

  XE vm-param-set uuid = $UUID PV-args="ks=/my/path/ks.cfg '.

  XE-vm-beginning uuid = $UUID

  now, it must be implemented on ESX. To determine when the new VM is fuly configured, my scripts from kickstart wrote a semaphore to be detected by the bash script.)

  I know very little about ESX and PowerCLI details will be particularly useful if you please!

  Thank you!

  Enjoy your break