How to install the updates failed?


I have recently upgraded to Windows 7 Ultimate 64-bit. I had a few problems that caused a few important and recommended updates to fail. Now that I have problems, I would like to go back and try to update those who failed. How can I do this?

Any help would be greatly appreciated!

I want to thank you all for your help. I just noticed that Windows has automatically made another attempt to install updates, and it succeeded. There are a few others that must be repeated, so I hope he does it on his own again. Once again thank you for your advice and your expertise.

Best regards


Tags: Windows

Similar Questions

  • How to install the updates offered at startup?

    Original title: how to install Microsoft Update? (2nd edition: cannot perform the update of Windows.) Every time I turn on, this part of the sentence 'INSTALL MICROSOFT UPDATE').

    Whenever I turn on, of the phrase 'INSTALL MICROSOFT UPDATE'.  Have no idea where to go. It gives a sentence below, although no where to install it.  A Setup window will appear, "READY to INSTALL".  I click OK and nothing happens.  Did as shown but nothing happens.


    1. have you made changes on the computer before this problem?
    2. it worked before?

    Try the following and see if it helps.

    Method 1:

    How to reset the Windows Update components? :

    Method 2:

    Try to temporarily disable the security software and check if it helps.

    Note: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

    Method 3:

    How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation:

    See also: how to configure and use automatic updates in Windows:

  • How to install the updates for photoshop elements on Windows 10 13?

    When I open the Photoshop Elements program, I get the same information every time update. I tried the install now and install on the output. I gave permission to make my computer accept updates.  Updates are displayed in complete form everytime and I rebooted the computer, but yet I still get the same updates when you open the program.  Any suggestions would be greatly appreciated.

    Hi cassandrak89742630 ,

    Would like to inform you that Photoshop elements 13 is not compatible with Win 10, refer to this article:- system requirements | Adobe Photoshop Elements

    In the meantime, you can install the updates by using this link:- updates to Photoshop Elements and Camera Raw

    If a problem persists, try to install the other user account with Admin rights

    Kind regards


  • How to install the update for CAPICOM (KB931906) Security Version

    original title: implementation of security update for CAPICOM (KB931906) Version

    How can I take care of this update for CAPICOM (KB931906) security Publisher Version Http//

    Hi FOTISmaheras,
    -What exactly is the problem you are having? Are you unable to install this update?
    -If Yes, are the other updates complete the installation successfully without any problem?
    CAPICOM is a component of Windows that provides services to programs that allow cryptography-based security. This includes the features of authentication which uses digital signatures for enveloping messages and to encrypt and decrypt data.

    Note This update requires Microsoft Windows Installer version 3.0 or a later version of Windows Installer.

    For more information, click on the number below to view the article in the Microsoft Knowledge Base:
    292539 How to obtain the Windows Installer engine
    Download the stand-alone update package and install it manually.
  • How to install the updated ipa without destroying the data of the user

    Hi - I hope it is easy...

    I'm getting near the end of my app development iPad... at this moment I can store files locally on the iPad from my AIR application.

    But every time I make a change to the app and republish the ipa, the only way I know how to get it on my iPad is to delete the app on the iPad, then install the new version via iTunes. It works, but it sweeps that everything locally saved files of 'user '.

    So, how can I put a new IPA update on the device without losing the data stored, similar to the download of an update on the app store?

    Thank you

    Okay, okay... I just had to remove the app under Apps in iTunes, then unmold in the new API. I knew it would be something stupid that I didn't. Thank you

  • How to install the update for bd-2012 from cyberlink on Eve comics on DVD HPMediaSmart.

    have dv7-1270US and reader of specific causes Blu - ray to request the upgrade for BD-2012. I downloaded the update on my desk (it's from cyberlink) and when it works, it finds MediaSmart DVD and it says that must be uninstalled everything first. When I select YES to uninstall MS DVD, I get the message, the Installshield wizard of MediaSmartDVD, "error. The definition of the lost product file. "can only click 'OK '. All other BD and regular movie discs play fine. I can't uninstall HPMediaSmart DVD. Any problem for some comic, I guess. When I'm looking at is a new version - "Knight and Day" with Tom Cruise and Cameron Diaz.

    Hi Stevengwp

    As the problem in HPMediaSmart DVD, I would suggest that you contact HP support for assistance in uninstalling the app or any other associates - suggestions


    I hope this helps.

  • My Windows system update stopped downloading programs he wants to install, how to install the updates again? The error code is 80070490

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: How can I fix the error 80070490?

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Quote your full version of Windows (for example, WinXP SP3;) Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

    Assuming Vista...

    0 X 80070490 - ERROR_NOT_FOUND
    Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

    The error you receive occurs if there is corruption in the manifest of component maintenance base.

    Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
    "Explains the SFC / Scannow.

    A repair install is the usual solution of SFC/scannow does not work.

    You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

    NB: If you have installed SP1 for Vista - step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

    Uninstall SP1

    See also:

    How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008


    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • How to install the update on vista 32 bit fax drivers

    I downloaded a driver of bridge e for fax Toshiba Studio3500c to connect it with my laptop Toshiba Satellite Pro L300 and unzipped the box but their doesn't seem to be any key of the option to install it.

    Does anyone know how these 20 files can be downloaded & installed because windows do not react with the demo because they stopped support for Vista & XP now? the demo page there is no stay

    Hi Wayne,
    Please follow the steps under update manually the driversof this article and check if that helps.

    Thank you.

  • I need to reinstall LR 6. So far, I downloaded and successfully installed LR 5. When I DL LR 6 I don't get a file windows executable? How to install the update to LR 5 to 6?

    I have to reinstall everything on my computer again. I have instslled LR 5, but need to install LR 6. The LR 6 file I have DL is not a file windows executable. How can I install. I have my serial number.

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • How to install the update of Lightroom 3

    Hi, I bought Lightroom 3 for window and it works fine but I have now bought a Macbook pro and want to get a download to continue using it, is this possible please?

    I was assured by the seller, all I had to do was contact Adobe and they would provide a...

    Thank you

    CTRL + click on the Adobe Lightroom 3 pkg file. Then click Open, and then follow the prompts.

    No longer required tech know-how.

    See Solution 1: error: Adobe application "was not signed by a recognized distributor | Mac OS

  • [ACS] How to install the cumulative update?


    I want to install the update rollup 9 for Cisco ACS

    I found the installation guide:

    Instructions on how to install the patch =.

    1. open the CLI console

    2. set the new repository in which resides the 5-2-0-26 - 9.tar.gpg

    3. question: ' repository YOUR_REPOSITORY 5-2-0-26 - 9.tar.gpg acs patch install.

    We have configured 2 ACS devices in "Split ACS deployment"

    How to install the update rollup on 2 servers?

    If I install on the principal server, the secondary replica patch?

    Thanks for your help,



    Patch must be installed on the two ACS CLI saprately. It cannot replicate.

    Kind regards

    ~ JG

    Note the useful messages

  • Not able to install Windows XP media center 2005, het a message to install the Update Rollup 2.

    Original title: how to install the Update Rollup 2

    I recently bought a kindle fire hd but when I connect it to my computer with the usb connection, it shows not only a connected device on my tried to install windows xp media center edition 2005 (kb900325) .but it would not install it came a message saying I need to install cumulative update 2 first.î tried, but does not Please help

    Hi James,

    Welcome to Microsoft Community where you can find all the answers related to Windows.

    According to the description, it looks that you are not able to install Windows XP Media Center.

    I have a couple of steps that should help you to solve this problem.

    Follow these 4 steps to install the KB925766 correctly:

    a. if the 886904 update is installed, you must uninstall the 886904 update before you install the Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005. Otherwise, the installation of .NET Framework 1.1 SP1 will fail.

    To determine whether the 886904 update is installed, follow these steps:

    i. click on start, run, type appwiz.cpl, and then click OK.

    II. Click to select the show updates check box.
    III. in the list currently installed programs, locate the following item:

    Fix for Microsoft .NET Framework 1.1 (KB886904)

    If you see this option, you must remove the hotfix. To remove the patch, click on the Microsoft .NET Framework 1.1 (KB886904) Hotfix and then click on remove. Then, visit the Windows Update Web sit to download and install the Update Rollup 2 for Windows XP Media Center Edition 2005.

    b. to install this update, you must have Microsoft .NET Framework 1.1 and .NET Framework 1.1 SP1 installed. Windows Update detects whether these packages are installed. Windows Update automatically installs these packages for you.

    (i) follow the link below to download the .net framework 1.1 manually:

    (ii) follow the link below to download the .net framework 1.1 SP1 manually:

    c. cumulative update 2 for the Windows XP Edition Media Center 2005 (KB900325)
    Follow the link below to download and install the KB900325:

    d.October 2006 Update Rollup for Windows XP Media Center Edition 2005 (KB925766)
    Follow the link below to download and install the KB925766:

    Now try to install this update and let us know if it solved the problem.

    For additional help, refer to the article below:

    I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

  • Failed installation error Code 80070490 Windows Vista update KB976098. How to install this update or keep the windows to try to re - install?

    Failed installation error Code 80070490 Windows Vista update KB976098.  How to install this update or keep the windows to try to re - install?

    You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows Update KB976325 fails with error WindowsUpdate_8007371C and WindowsUpdate_dt000 code; How can I correct this failure and install the update?

    I can't install KB976325 update.

    The system is Vista Ultimate (64-bit) Service Pack 2.

    Error returned is

    "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

    I did the following:

    * Reset Windows Update via KB 971058
    * Check the files with the file system Checker: no problem found
    * Downloaded KB 976325 as a stand-alone file, the update failed (no error given)
    * Ran Windows Live OneCare Safety Scanner: no problems found.
    * Ran Windows Defender quick scan: no ound problems
    * Clean the registry and temporary files with Windows Defender

    There must be a solution to this problem!

    In desperation, I tried the Windows 7 upgrade.  The upgrade failed at the last step.  Vista was reinstalled and it works OK.  However, I can't yet do the KB 976325 update!  Oh, the Windows Defender definitions file has been updated through Windows Update fine.

    FYI-you are in the right forum.  All Windows Update components are in the same enclosure.  It is important to publish the specifications of your system, as you did.

    OK, lets start with a few basics.  This KB976325 update is an update of security for Internet Explorer 7.
    -First question is therefore always you use IE7 or have you moved to IE8?
    -If you are looking for your update history is this show as installed KB?  It is possible that it is already installed and that it is presented again for some reason any.

    Take a look at this article.  It does not appear that you have tried these steps yet. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows update fails - the file specifies some updates not installed - 9 updates failed, code 80073712 and code 78(f).

    Windows update fails - the file specifies some updates not installed - 9 updates failed, code 80073712 and code 78(f).
    The update runs, and then told me that updates failed to install update automatik research, I had more failed updates that havew installed correctly.

    Hi Ben Dean,

    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.

    To run the System File Checker, follow these steps:

    1. Click Start and type cmd in the box start the search.

    2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.

    3. at the command prompt, type Sfc/scannow, and then press ENTER.

    For more information, see the following Microsoft article:

    This article describes how to use the tool (SFC.exe) System File Checker to fix the system files missing or corrupted on Windows Vista or Windows 7.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    I hope this helps!

    Thank you, and in what concerns:
    Shalini Surana - Microsoft technical support.
    Visit our Microsoft answers feedback Forumand let us know what you think.

Maybe you are looking for

  • Atheors 5005 Wlan card cannot connect to WPA encrypted AP

    I'm posting this new thread too thought... I'm unable to connect to a wpa encrypted using my satellite pro L20 girlfriends access point / WinxpWindows XP will allow me only to choose either 'disabled' or 'WEP' in the tab 'association' of the section

  • Qosmio X 500 - unable to send/receive information to/from any mobile phone

    Hello Bluetooth allows, but I can't send or receive any information to/from any mobile phone. It does not recognize the X 500 and the other recognizes but cannot connect to X 500. The two mobile work with each other. After a few seconds, when a messa

  • Lagg while streaming video

    Hi guys,.my video plays really lag then I play my laptop, but if I use it for my ipad is not... so it means there is sumthing wrong with my browsers or sumthing. can you guys tell me the solution for this please?

  • Cyber Patriots practice question!

    I joined this competition and it is to harden the computer and make sure that there is no way to be used by another host etc. And I'm running a dirty picture on a VMare and I have a problem with XP and I was wondering if I can get some tips on how to

  • ENVY 5530 e-all-in-One Series: My ENVY 5530 e-all-in-one prints only two pages of a multi-page document.

    My newly installed (Jan 2015) ENVY 5530 e-all-in-one prints only two pages of a document with several pages of my HP desk top 500-123ea, windows 8.1. Message on PC "Unable to print document", it's even on Double or single sided printing.  A ran Scan