How to install Windows 7 32 bit, updated to 64-bit

Hi, using windows 7 32-bit for a year, but I like to upgrade to the 64 bit version, my info is required system. {processor intel dual core 3.00 ghz, 8 GB ram, 2 GB NVIDIA graphics card,} so for all these requirements may be able to install the 64-bit, although I tried once to install but it says I can not confrtable in this version.so what can I do, please help me on this problem

You need to boot from the disc, by setting your BIOS to do. I have provided these instructions in my previous answer. Remember, there is no way to upgrade from 32 to 64-bit, it's pure install only.

http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

How to load BIOS and change Boot Configuration

Tags: Windows

Similar Questions

  • How to install windows xp 32 bit on hp dv6-6117tx lodge and application download driver on windows xp

    How to install windows xp 32 bit on hp dv6-6117tx lodge and application download driver on windows xp

    Hello

    Please read the XP downgrade useful guide at the link below

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and/General-XP-downgrade-Guide-for-HP-laptops/TD-p/83267

    The guide details for your series model are in the section called 3. Dwas Modelisation

    Paul

  • Satellite P300 - how to install Windows 7 64 bit?

    Hello

    I had a Toshiba Windows 7 upgrade for my P300 which was under Vista 32 bit. During installation, asked me if I wanted to install 32-bit or 64-bit Windows 7 and I chose 32-bit. Installation worked fine.

    Now (moths later) I decided that I would like to install the 64-bit version instead. I have an own (custom) settled by booting from the DVD, but it don't did me not option for the moment and all re-installed Windows 7 32 bit. I know that the 64-bit version is on the DVD (there is a folder for it) - how to start from the DVD and have it install the 64 bit version?
    I didn't format the drive when you perform the clean installation - if I do that it will give me the option?

    Thank you
    Ben.

    Great news, mate! :)

    Thank you for this feedback. I'll test it on my Satellite P300 I want to upgrade to Windows 7 too.

    In addition, an upgrade is possible to the same version: This means that Vista 32 bit can only be upgraded to 32-bit Windows 7. On 64 bit it s the same ;)

  • How to install Windows 7 64 bit on Windows 7 32 bit

    I made an unfortunate mistake.  I installed Windows 7 32 bits instead of Windows 7 64 bit on my installation of Vista on a gateway GM5626 (which has a processor Intel E2180 CPU).  Regardless of if I now start the 64-bit DVD directly or starting up in the 32-bit Windows 7 installed now and then try to run Setup manually.  Any suggestions?

    How to restore a Windows 7 computer to a previous Windows installation by using the Windows.old folder.url

    Messages rating helps other users

    Mark L. Ferguson MS - MVP

  • How to install windows 8 64-bit bundle

    I can't find installation guide for 64-bit bundle. 7 zip do not open it. How to proceed?

    For Windows host, you download for example VMware-workstation-full - 9.0.2 - 1031769.exe not the VMware-Workstation-Full - 9.0.2 - 1031769.x86_64.bundle which is a Linux host!

  • Cannot install Windows 7 64 bit

    I can't install Windows 7 (64-bit), because it shows that my hardware cannot support. I installed the 64-bit version earlier, and there is no hardware changes since then. In addition, on the same system can be installed Windows 8 (64 bit)! Suggestions how to install Windows 7 (64 bit) on this system.

    If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  • How to install Windows Update

    HOW TO INSTALL WINDOWS UPDATE

    The Windows Update program is installed in your operating system.   http://Windows.Microsoft.com/en-us/Windows/help/Windows-Update

  • How to install windows 7 on vista 64-bit with USB key or usb hard drive

    I use windows vista 64 bit on HP Pavilion dv9925nr. HL-DT-ST DVDRAM GSA-T40L ATA Devicedisappeared 'my computer' and 'Device Manager' list a few days ago. There is no upper and lower filter. Device is that in the "boot order" Start menu device sometimes comes for everything and disappears again. ROM has the power. Opening of the shutter. Device works beacause I copied a cd when it was clear. I think that this problem is related to the software. When the device appeared I also uninstalled from Device Manager and looked for a device change so she is back, but after some time again say aapeared. I want to try once by complete control of formatting and install the new copy of windows 7 and let see if the appliance becomes stable. I can't install with cd rom then how to install using a drive hard usb (WD 200 GB).
    Please suggest.

    Remember that HP does not list Windows 7 device drivers, that's why your computer is not compatible Windows 7.  HP Driver support: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3740568&lc=en&cc=us&dlc=en&lang=en&cc=us

    ==================================================================

    Windows 7 USB/DVD download tool:
    http://store.Microsoft.com/help/ISO-tool

    Create a bootable USB:
    http://www.victorchen.info/create-a-bootable-USB-memory-stick/

    Install Windows 7 from USB drive/key:
    1) http://www.maximumpc.com/article/howtos/how_to_install_windows_7_beta_a_usb_key:
    ( http://www.windowsvalley.com/blog/install-windows-vista-and-windows-7-using-bootable-usb-storage-device/ 2)
    ( http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/ 3)
    4) http://technet.microsoft.com/en-us/magazine/dd535816.aspx

    How to create and make Bootable in Windows 7 ISO from EXE Plus Setup1.Box and setup2. Box:
    http://www.mydigitallife.info/2009/10/23/how-to-create-and-make-bootable-Windows-7-ISO-from-exe-plus-Setup1-box-and-setup2-box-files/

    Also: A quick way to get your Windows 7 into a bootable DVD:
    (This guide is for people using the upgraded version of the students, composed of)
    Setup1.box, Setup2.box and Win7-P-Retail-en-us-x64)
    http://www.TomsHardware.com/Forum/1392-63-Windows-upgrade-bootable-guide-having-issues

    How to install Windows 7 from a USB stick without DVD ISO of Windows 7:
    http://www.Blogsdna.com/2016/how-to-install-Windows-7-from-USB-drive-without-Windows-7-ISO-DVD.htm

    How to install Windows 7 from a Flash drive with XP or Vista:
    http://www.legitreviews.com/article/1031/2/

    Use a USB key to install Windows 7 - even on a Netbook:
    http://TechNet.Microsoft.com/en-us/magazine/dd535816.aspx

    Cannot install Windows 7 error USB "Setup could not create a new partition system:
    http://social.answers.Microsoft.com/forums/en/w7install/thread/4b3c0430-9E41-47F6-b1cd-aed55fea7dad

    J W Stuart: http://www.pagestart.com

  • How to download windows install windows 7 32 bit service. The system (Dell 4500) let me download after xp to 7 upgrade. Involved also does not work.

    How to download windows install windows 7 32 bit service. The system (Dell 4500) let me download after xp to 7 upgrade. Involved also does not work.

    Install W7 sp1.

    Then go to the support page of Dell for your computer and download the audio drivers W7 from there and install them.

    See you soon,.
    Jerry

  • I installed Windows 7 64 bit and then some programs will not install the 64 - bit while telling me that I have a 32 bit OS. How can I make sure I have load a 64-bit version only when there is a choice?

    I have create a new PC and installed Windows & Pro 64-bit. While some offer programs install both 32-bit and 64-bit as a single installation and the installation of the program checks it should install. A few programs installed 32-bit when I said to use the 64-bit. I received a message that I had a 32 bit OS and that it could not install the 64-bit version. How can I ensure that the 64-bit version is always installed when it is available. I have a program that I need it's 32-bit however.

    I also installed Office 2010 and want to know how to check if it installed 32-bit or 64-bit.
    All this is because I'm about to build a new PC for my wife and want to avoid these problems right at the front with it.
    Thank you
    Doug

    If you buy a commercial version of win7 you are provided with the installation dvd of bit versions and a unique activation key. You cannot install both versions.

    Most of the programs will install without problem in a 64-bit version of victory, there is very little that will not be installed on Windows 64-bit.

    You install programs as usual, you don't need to change any settings or install to anywhere other than their default locations. -C' IE you do not manually select the x 86 folder or any other folder.

    If the program you are installing has the ability to install a specific version of bit, and it does not work, then the problem is that options program installers, you must contact the program support

    A retail version of Office 2010 also comes with two versions of ILO.

    Having a 64-bit version of victory does NOT mean that you need to install 64-bit Office, in fact MS recommends that stick you with 32-bit Office (reason being compatibility with various plug0ins Office)

    And of course the 32-bit version of win only supports 4 GB of memory

  • How can I install windows 7 32-bit 0n hp spectrum xt ultrabook 13-2308TU

    Hello everyone

    I want to install windows 7 32 bit on my laptop which is "hp spectrum xt ultrabook 13-2308TUi. but I could not find the drivers. any suggestons do not hesitate.

    Thank you

    Hello:

    Use the W7 32-bit drivers for the 4540 of HP Probook.  They should all work except the card reader.

    Your model uses the Intel HD graphics driver.

    DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5229457&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4053%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    This model card reader driver should work for you.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102008-1&cc=us&DLC=en&LC=en&OS=4062&product=5118672&sw_lang=

  • How to uninstall Windows 7 32 bit or get the clean install of Windows 7 64 bit to work properly.

    Today, I bought and installed windows 7 32 bit as an upgrade from vista 32-bit, shortly after I spoke to my friend and he told me that I could have used the disk for 64-bit and Windows 7 64 bit instead, the problem now is that I can't find a way to remove windows 7 32 bits using other methods I've seen here as the file Windows.old, it isn't here. Also I cannot perform a clean Windows 7 32-bit to windows 7 64 bit installation because when I insert the disk it says that I need to boot from the disk, so I tried then whenever he says failed to load. IM fine with doing a clean install and losing what I have, because I have them the settings and files saved externally already so no need to save again.

    Thank you very much

    Mango

    Looks like you're stuck with a clean install of Vista's original support for start.

    Messages rating helps other users

    Mark L. Ferguson MS - MVP

  • I installed windows 7 32 bit on my computer. But I want only to 64-bit

    I installed windows 7 32 bit on my computer. But I want only to 64-bit. But unfortunately I lost the installation disc. How can I upgrade?

    For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

    It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

    Given that this option is no longer available, what are your options? See the article for more details:

    How to: What are my options for Windows 7 reinstall media?

    You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

    Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

    Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

    http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

    Boot from the Windows 7 DVD
    Click Install now
    Accept the license agreement
    When the option is displayed to select a type of installation, click (Custom advanced)

    Select the disk partition where you want to install Windows 7 click Next.

    You will receive the following warning:

    The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

    (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

    The installation program will now begin installation. During installation, your computer will be restarted several times.

    Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

    You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

    http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

  • Install Windows 7 64 - bit to 32-bit

    I bought a used PC which has Windows 7 32-bit on it. The license allows me to install Windows 7 64 bit on it?

    Yes, as long as you install media for the corresponding version of 64-bit Windows 7.

    You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

    Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

    Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

    http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

    Boot from the Windows 7 DVD

    To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

    http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

    Click Install now
    Accept the license agreement
    When the option is displayed to select a type of installation, click (Custom advanced)

    Select the disk partition where you want to install Windows 7 click Next.

    You will receive the following warning:

    The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

    (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

    The installation program will now begin installation. During installation, your computer will be restarted several times.

    Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

    You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

    http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

    If you do not have 64-bit install media, see the following resources:

    For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

    It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

    Given that this option is no longer available, what are your options? See the article for more details:

    How to: What are my options for Windows 7 reinstall media?

  • I installed windows 7 64 bit, but have no drivers

    I installed Windows 7, 64 bit. But it seems that all the drivers are missing. I have discs of windows, but so far, that doesn't seem to help. I post this question from another computer, as the WiFi does not work with the new facility, because it seems not to have the device.

    Thank you
    Chris

    How to install, update, and troubleshoot hardware in Windows 7 ...

Maybe you are looking for

  • Downloas file with firefox logo cannot be found in the computer and cannot be used for attachment to e-mail

    I have a "downloads" folder in my documents where all down loaded files are stored. Top down loaded new Firefox browser, it has built its own 'downloads'-in the program. All my downloads I receive mail electronic to the low loading in the "downloads"

  • Config-software Bluetooth is frozen

    I have a Tecra A9 with Vista and the latest Bluetooth Stack 6.30.01. When I right click on the bluetooth icon in the lower right corner of the pop-up menu appears.But I can't click any menu item, the program is not responding. I started working when

  • charms are bar-turning power switch

    I would like to disable the charms on the touchpad, when bar you swip it from the right of the key pad.  I only want it to show up when I swip on the touch screen or when I push the Windows logo and the 'c '.  Is there a way to activate the charms ba

  • As soon as I install updates, he again wants me to install the same.

    When the yellow shield appears saying him are updated to install I install updates and a few minutes more late the shield there is once again telling me to install the same updates.

  • RECYCLER virus

    I have difficulty eleminar virus, my computer recycler, I installed Windows Vista. Can you help me?