How to install windows 7 on a laptop after hard drive crash?

Similar Questions

• Satellite A100 - how to install "Windows XP MCE" on a new HARD drive?

  I have a laptop Satellite A100-495. the cd/dvd does not work and I have a new hard drive. Now, I want to install the original os (windows xp professional, mce).
  I'm trying to put the files of my original restore on a USB cd but never works and I did not find useful clues in any part of the forum.

  Is there anyone out there who can help me?

  Hi, marawe

  It would never work if you just copy the files from recovery Cd on a usb key. You need to make a BOOTABLE FLASH DISK, to do you need an application like Flashbot... Google.
  Download and install it, after that you can make a bootable usb key.
  You should know that your Bios must support boot with a Usb key, I don't know about your knees. Otherwise, you cannot do so. Hope it works

  Welcome them

• How to install Windows 7 upgrade on a blank hard drive

  My previous installation of Windows 7 upgrade on my hard drive that had a Windows XP installed upgrading later had a HD failure. I bought a new HD and have not been able to perform a reinstallation of Windows 7 using either the previous update purchased DVD. How can I install my upgrade to Windows 7 on the new HD?

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• How to install Win 8 on Satellite C850 after HARD drive failure?

  I have a PC repair business and a customer gave me a portable Satellite C850-1 kN which took a catastrophic hard disk failure (just clicking from the road).

  I replaced the hard drive and tried to boot from a DVD 8 Windows, changing the order of startup in the bios, however, it still gives an error message "no boot device."

  I see no way to turn off boot UEFI, it appears grayed out in the configuration of the bios.

  How can I reinstall Windows on this laptop?

  First, you must know that the (CSM/UEFI mode) parameter must be changed if you want to install the system supported UEFI not (Win 7 and higher).
  Win 8 and 8.1 Win are UEFI capable systems and you should be able to use the option to UEFI mode.

  What about the secure boot option?
  Have you found and have you tried to disable this option?

• How can I reinstall audition CS6 upgrade after hard drive crash?  Qualifying previous product is not on my computer.

  How can I reinstall audition CS6 upgrade after hard drive crash?  Qualifying previous product is not on my computer.

  Never mind.  I found the license key for the previous product and was able to complete the installation.  Being a "pack rat" has its merits, sometimes.

• How to install Windows XP on Portege S100 home after HARD drive crash

  In my laptop s100-s1133 of a HARD drive crash. I buy a new one. Now, I can not intall OS (Windows XP). Windows is not installed, because it does not find my HARD drive. I got downlad drivers for toshiba (Toshiba RAID driver for XP (v1.3.8.0, 10/04/2006; 465 K)). After the installation of win98, it cannot detect the CD-rom...
  Y at - it a recovery for this model cd? or can say smb, how can I install WinXP on this model

  Hello

  You are right that you must install the first RAID driver before installing the operating system.
  If you have installed the RAID the installation Win driver will ask you to format the HARD drive.
  In this case, do NOT format the HARD drive because the RAID driver will remove and it is not possible to install the Windows XP.

  Now your question Win98; is on the page of the Toshiba driver you will find not all drivers for Win98 for this device and I assume that you need a particular driver for the CD/DVD drive to activate this device.

  I give you a warning regarding the use of the WinXP

  PS: On the Toshiba driver page, you will find the installation instructions. Follow this guide!

• BSOD on install of Windows 7 after hard drive crash

  I have a HP Dv7 with Intel i7 and 8 GB memory. About 3 years.

  Recently, I lost my hard drive to a physical failure. I bought a 120 GB SSD as the principal and a 1 TB drive 7200 RPM as the secondary to be replaced. I ordered the HP restore kit to reinstall Windows 7, but each installation stops at "loading drivers" step and gives me a BSOD. I tried to remove the SSD drive and using only the hard drive, but the same results. Also tried to do a clean install of Windows 7 with an ISO image to a bootable USB key. The same problem. I also tried swapping the primary/secondary locations for readers.

  Nothing I have tried seems to work. I'm desperate for a solution! Why would I get a BSOD on a reinstallation of the software factory?

  I am trying install Windows 7 without SP1 to see if that works, but have no chance. What else can I try? What I have to install Windows 8 to work with the new hard drive or SSD? »

  I tried to restore 4 times (3 hours + per attempt). I tried the clean install of Windows 7 SP1 at least 10 times, each of them do not reach the exact spot. Windows won't INSTALL, so that steps can be taken?

  As I posted earlier, I had problems with installing Windows 7 on my laptop HP Pavilion Dv7 after replacing a hard drive defective. I ordered the kit of training materials ($60) and the operating system of restoration kit (essentially Windows 7 and drivers) on a 4 disc set. I paid the extra money for all accelerated for me.

  After you have installed a 120 GB SSD and the new 1 TB drive 7200 RPM, I tried to install the operating system using the DVD restore I ordered. Each installation took about 4 hours and each of the 3 times (i.e. 12 hours!) installation has failed at the end of the installation process. Then I downloaded a clean version of Windows 7 ISO and burned a bootable USB an attempt installs another 15, which also failed at the end of the installation process.

  In desperation, I contacted HP support and was informed that I had to pay for technical support. I must say that I was really disappointed by HP and HP «each incident» support I spent $59 and 3 hours talk with some idiots in the new Delhli, who accompanied me through a few tests of BIOS of base no matter what 3-year-old could have understood, I sent them a picture of the BSOD and error code, and they arrived at their 'solution' to send me my laptop to HP for them to install a new hard drive and reinstall the operating system for the pittance of $200 and 7 to 9 days!

  I refused their generous offer to relieve myself of the burden of $ 200 in my wallet and took the laptop to Fry when I bought it. After 15 minutes of discussion about my question, the tech told me that I needed to install the Intel drivers during the installation of Windows 7. He popped a USB key containing the Intel drivers, I've needed, continued with the installation of Windows 7, and I was back at home with a working machine within the hour. It cost me $35. A BARGAIN, given that HP, the company that BUILT my laptop was completely distraught about this problem and the only solution was to deprive me of my laptop for 9 days and during this time, charge me $200.

  So to all who read this, please pay NOT for the HP "per incident" support. They are slightly educated idiots who know no more about the HP product than your typical 3 yr old child. For example, they suggested that the HP laptop in my possession was "very sensitive" and I wouldn't be able to put 'any hard disk that was not exactly to the same specification as that was in it from the factory'.  Idiots.

  I you need to re - install Windows 7 on your laptop, visit the Intel website and download "floppy" (i.e. not the executable versions which self install) versions of their drivers for your laptop, load on a USB stick and when begins the installation of Windows 7 where it asks if you want to load the drivers, select the drivers on your USB key and installation will be smooth.

  Again, how is it possible that HP and their support forums are not aware of the problem or the solution? Seriously. This is probably the last HP I buy. Just exhausting and annoying to deal with this.

  Craig

  PS - My HP Pavillion DV7 is smoking quickly with the new solid-state drive and updated 7200 RPM secondary drive. * beep * thing boots like 20 seconds and Photoshop load almost INSTANTLY. Incredible.

• Re-install windows 7 home prem on a hard drive replaced

  I have a HP probook 4520 laptop computer s which is come with a pre-installed win 7 home prem copy OA 32 bit, when I bought my laptop I was told that I need to reinstall the windows it is possible to simply reinstall without cd or dvd as the copy of windows is saved on the laptop, in any case now my laptop is out of warranty (it just just expired a month ago) and my hard drive crashed, there was no way to get what was in it, so I had to buy a new hard drive, now my problem is, how do I install a new original and an activated copy of windows 7 on my computer, knowing that the only thing that I have now is the sticker on the back of my laptop which has number of authenticity Windows that has been installed on the hard drive dead (the former)? is anyway to do this? Help, please

  is it OK to install the copy of 64-bit and not 32 Bit? the product key will work?

  I want to install the 64-bit because I need RAM reading entirely, as the 32-bit edition do not recognize fully...

  The key of Windows 7 works with 32 and 64 bit, but can only be installed at a time.

  First, make sure that the 64-bit drivers are available for your computer - check with the manufacturer.

  If you are moving to 64 bit make sure that your computer can run 64-bit - you can use the Upgrade Advisor to check:

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Installation and reinstallation of Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Case of failure of the online activation:

  Call Microsoft use the manual phone Activation

  Note: If you always install Windows page enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.

  1. open Windows Activation - click on the Start button, right-click computer, click Properties, then click the option to activate Windows now or change your key.

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated phone system.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. dial one of the available phone numbers listed.

  7. do not select all options and wait for a person pick up, then explain what happened.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Can I install windows 7 on the superdive replacement hard drive

  Hello people,

  Recently I replaced the drive of my macbook pro 13 inch mid-2012 with an adapter (caddy tray) to put in a second hard drive (500 GB todhiba).

  Now I am trying to install windows 7 with bootcamp (on an os x 10.9.5, bootcamp 5.1.2), but when I boot from the usb device, when windows ask me which drive I want to install it, it says: windows cannot be installed to this disk, drive must be formatted ntfs + your computer hardware seem unable to run windows 7 check your system components and try again.

  I've tried several things: the direct USB win7 reformat, delete the partition, create partition... still no luck.

  Of in osx: reformat the disk with unallocated space (MBR) and try again to install direct USB... had the same error messages.

  I even tried to install Ubuntu gnome rather with a live usb works but all I get when holding the option button while booting is my Macintosh HD, the drive appears.

  Can someone give me about workaround or even show me the way? I am out of ideas now.

  Thank you very much

  Simon.

  Please see Installer Windows 7 Pro on the second HARD drive which is in Optibay for some answers.

• I used to have the windows xp Media Center until my hard drive crashed. I had to put a regular version of xp on my pc. can I get the media back version?

  I used to have xp media center edition 2005 on my pc until my hard drive crashed. I had to put a regular version of xp on my pc. I would like to put back the original version on it. is there one out there somewhere I can get my hands?

  Unfortunately, you can not install Windows Media Center in home or Pro.

  You will need to purchase a new DVD of WMC 2005.

  They are cheap now and I saw them on the Web for about $60

  Do a search and you will find them.

• I have a serial number valid for windows Vista Home Basic, but my hard drive crashed and I have no way to re - install vista on my computer. I am looking for a download so I can do it.

  Basically, I installed windows 2000 on my machine and I can't find a download for windows vista home basic that doesn't have some kind of crack or keygen. I want a legal copy not a hack. I have the serial number supplied with my computer. where can I find this download or get a drive.

  Here are all LEGAL for Vista:

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Install Windows 7 upgrade on the new hard drive?

  I have the Windows 7 upgrade version that I installed last September, but a few days ago my hard drive died.  How do we install the version 7 upgrade on the new hard drive without using a previous version of windows on it?

  In order to install the Windows 7 upgrade version, you must have a system of eligible operating Windows installed and activated.  You cannot install a version upgrade of Windows 7 on a drive blank.  The installation procedure you do not insert a Windows disk in the drive for verification, eligible operating system must be installed.

  If you do not have a qualification system of operating Windows installed with an activated genuine license, then you can not use the version upgrade of Windows 7 - you would need a license of Windows 7 "full version".

  In summary:

  1. a Windows operating system to eligible address must be installed.
  2. the Windows operating system to eligible address must have a genuine license (product key) and it must be enabled.
  3. to upgrade, boot on the eligible Windows desktop, insert the Windows 7 upgrade disc in the DVD player.
  4. when the menu appears, select custom (advanced option) to a clean install procedure.

  You should be able to repair the installation, if your installation one fall. I suggest create you a System Image (backup) of your installation of Windows 7 after installation of Windows 7 in order to spare you the trouble if your computer one fall in the future.

  You can work around this two ways, I would suggest that you create a System Image (backup) of your installation of Windows 7 after installation of Windows 7 in order to save you the trouble if your computer loses the system failure or instability. Since you are in possession of a valid license of Windows Vista for this computer, you can use the following method to do a clean install with upgrade support:
  http://www.winsupersite.com/Win7/clean_install_upgrade_media.asp
  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• I have a Windows XP computer with 2 hard drives. Can I install Windows 7 in one of the hard drives?

  I want to upgrade my XP computer to Windows 7.  I have 2 drives, a master and a slave.  Given that I can only do a custom Setup, before I upgrade I want to backup my data on the slave drive and then do the custom Windows 7 install on the master.  I have this possible?  And, if possible, can I then copy the files to the slave to the master?

  Yes, you can.

  To ensure a security update, follow these steps:

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Satellite A200 - 1 GB - trying to install Windows XP Home edition but without HARD drive?

  Hello world!

  Recently, I bought a new laptop, Satellite A200 - 1 GB, and after two weeks of fighting against windows Vista I decided to uninstall it and install WXP whose permit, I bought a long time ago.

  I restarted my computer with the Windows XP cd to the inside and I start the system with it, but when it loads all the controllers and I proceed with the installation of windows xp, it says that there is no disk (probably) in my laptop.

  I hope someone can help me. Someone at - it windows XP installation experience in this laptop model?

  Hello

  The species has been described several times here in the forum of Toshiba.
  Recommend studying a little ;) would use the advanced search option Forum!

  But because you're a beginner, that I'll try to give some useful advice.
  The HARD drive is not visible because you need to first install the Intel Matrix storage controller.
  This controller can be downloaded form or another page Toshiba or Intel page.

  During the installation of XP, you will need to press the F6 key to include this iMSM in the XP installation. You will need an external USB HDD drive to do this.

  But if you want, you can build an own XP CD using nLite software and could understand this iMSM in the XP CD again.

  Please also check these discussions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25749

• How to recover windows system when it is destroyed hard drive and not COA?

  I'm sure that many people have encountered this problem. My system, including hard drive, was destroyed by an electrical surge, and I had no record of the serial number of the product.  I had a valid installation of Win XP - How can I get a new number to use for my replacement system?

  The answer depends on many factors that you don't specify.  Most of the OEM machines (Dell, HP, Compaq, etc.) have an OEM license that is valid for the first machine that it has been installed on.  If your motherboard was part of the 'system' that has been fried, your license was probably fried with it.  Some OEM licenses are locked to the BIOS of the motherboard so that if you replace the motherboard by the same jury from the same manufacturer, then the original installation disc can recognize it and install Windows XP without even asking for authentication.

  And it is this:
  "How to replace Microsoft software or hardware, order service packs and replace product manuals.
    <>http://support.Microsoft.com/kb/326246 >

  Otherwise, you might consider this a good time to upgrade to Windows 7.

  HTH,
  JW