How to install windows vista service pack 1

I am trying to upgrade my computer but it won't update service pack of windows vista both because I don't have a windows service pack 1 How do this help please

Hello

You will need to do a download of it, as SP1 is no longer available via Windows Update.

You don't tell what you have 'little' version of Vista (32-bit or 64-bit):

Click Start > right click on computer > left click on properties > it will tell you it.

Select download OK "bit".

Download for Vista SP1 (32-bit): http://www.microsoft.com/download/en/details.aspx?id=30

Download for Vista SP1 (64-bit): http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=21299

See you soon.

Tags: Windows

Similar Questions

  • Windows Update installed Windows Vista Service Pack 1 KB (936330) three times

    Although three times, Windows Vista Service Pack 1 has been installed, Windows Update still says it's an available update.  Information system does not indicate that it has been.

    What must I do to solve this problem?

    Learn how to install Windows Vista Service Pack 1 (SP1)
    http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

    Learn how to install Windows Vista Service Pack 2 (SP2)
    http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
    http://support.Microsoft.com/kb/947366

  • ERROR_NOT_FOUND (0 X 80070490) when you install Windows Vista Service Pack 2

    ERROR_NOT_FOUND (0 X 80070490)

    I tried and tried again to install Windows Vista Service Pack 2 x 64-bit system, but this error message keeps popping up. I tried to search for possible solutions, but they all tell me I have to use my Vista DVD. But there is a problem, I don't have it. I mean, that is, the gateway factory pre-installed Vista on my laptop, so I don't have the DVD. Is there anyone who can help me? THNX.

    Hi Jason,

    You can try the following solutions.

    Step 1: Download and install the system update readiness tool to run a single analysis for inconsistencies that may prevent successful installations of Windows Update.

    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    Step 2: Try to install Windows Vista Service Pack 2 now and see if it helps.

    Learn how to install Windows Vista Service Pack 2 (SP2)

    See also:

    Windows Update error 80070490

  • do not install windows vista service Pack 2 and received error code 800f081f

    I tried to install windows vista service Pack 2 used by windows update and did not erro code 800f081f. I tried soft micro that it fixed and still couldn't install pleasehelp

    Hello

    Learn how to install Windows Vista Service Pack 2 (SP2)
    http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
    http://support.Microsoft.com/kb/947366

    You select Download - SAVE? After download go where you put it and right click
    on and RUN as administrator.

    Download Service Pack 2 x 86 32 bit
    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = in

    Download Service Pack 2 x 64 64-bit
    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = in

    Create a new ADMIN account with your password - same then REBOOT (do not logoff) and
    log on to the new account and try the download.

    How to obtain the latest Windows Vista service pack
    http://support.Microsoft.com/kb/935791/

    Service Pack Center
    http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Try to install Windows Vista Service pack, but I cannot get past that the terms of the license pop-up ads.

    Install service pack for my Vista program,

    ... can not get past the license terms box pop... Help!

    Hello

    I suggest you to follow the steps in this link and check if it helps:

    http://support.Microsoft.com/kb/947366

    Also check out this link:

    http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

    It will be useful.

  • Cannot install windows vista service pack 1 and 2 error: 8007006E

    Original title: Windows Service Pack 1 and 2 will be not updated

    I tried a few times to download the Service packs 1 and 2 so that I can reinstall my Windows live messenger. I didn't have time to let it run full the last time, but this time, her gives me: "error (s) found: Code 8007006E - Windows has encountered an unknown error.

    Usually I have no problem with my updates, they fit very well. This time, of course when I need it, he decides to not work (Murphey's law).
    How to fix this or get to download correctly, so I can reuse my Messenger? I uninstalled my Messenger when it stopped working (would not allow me to connect to all) for about a month or two.
    Thank you!!!

    Hello

    1. can you install other windows updates?

    I suggest you to follow the steps below and check if it helps.

    Method 1: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058

    Method 2:

     Try to put your computer in a clean boot state, and then try to install Windows vista service pack 1 and 2 manually.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Method 3: Try to install Windows vista service pack 1 and 2 from the link below.

    Service pack 1: http://windows.microsoft.com/en-US/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

    Service pack 2: http://windows.microsoft.com/en-US/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

    You can also consult the following link for more information:

    Troubleshoot problems with installing updates.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Hope this information is useful.

  • I installed windows vista service pack 1 and now problems

    I installed windows vista service pack 1, and now it will not connect to the printer and I have no sound! I've updated the drivers of the two, and they work both according to their status of device but no sounds or printer connection. Help, please.

    Once solve you the problems with SP1, you can then start of SP2.

    How to resolve problems that you experience after you install a Service Pack for Windows Vista
    http://support.Microsoft.com/kb/948481

    A device driver is not installed or a hardware device does not work correctly after you install a Service Pack for Windows Vista
    http://support.Microsoft.com/kb/948187

    Important: things to know before you download Windows Vista SP1
    http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx

    Learn how to install Windows Vista Service Pack 1 (SP1)
    http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

    and - how to uninstall Windows Vista service packs as a troubleshooting step
    http://support.Microsoft.com/kb/948537

    Learn how to install Windows Vista Service Pack 2 (SP2)
    http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

    Information about Service Pack 2 for Windows Vista and Windows Server 2008
    http://support.Microsoft.com/kb/948465

    Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

    How to get the latest Vista Service Pack
    http://support.Microsoft.com/kb/935791

  • I get error 80070490 Windows updates when you try to install Windows Vista service pack 2.

    error 8007090

    I keep getting the error 80070490 update of the window when you try to install windows vista service pack 2. help Windows and support suggested that I insert the windows dvd the disk drive but I don't have a disk with my computer. I chose automatic convenience store on the microsoft support site. but I still have the same problem

    Hello

    Are you sure this is the error Code?

    And not this one?

    It is the opinion of Microsoft about the error code 80070490.

    'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

    http://support.Microsoft.com/kb/958044

    Method 1: run (Checksur.exe) system update readiness tool

    1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

      For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821

      (http://support.microsoft.com/kb/947821/)

      Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    2. Try to install updates again.

    Method 2: perform a Windows repair installation

    If method 1 does not resolve this problem, you can perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

    If you do not have a DVD of Microsoft Vista, you will need to borrow a DVD of Vista Microsoft from a friend or work acquantance to do a repair upgrade Installation.

    "This has occurred as soon as I updated from Windows XP"

    You have the upgrade DVD?

    Here is a tutorial on how to do it:

    "How to perform a repair for Vista Installation"

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    See you soon.

  • Cannot install windows vista service pack 1, 57 gives error code

    When you install windows vista service pack 1 that it says code 57 Windows update has encountered an error can someone help please?

    Hello

    (1) what is the exact\complete error message you get?
    (2) remember to make changes to the computer before the question?
     
    See the methods mentioned below and check if that helps.
    Method 1:
    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    Back up the registry
    Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
    Method 2:
    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
     
    Note: You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
     
    Method 3:
    The problem with Microsoft Windows Update is not working
     
    Hope this information helps.
  • Cannot install Windows vista service pack 2

    OT: used to install service pack 2 for vista
    : TRY TO INSTALL IT SAYS CANNOT INSTALL THEN RETURNS TO ORGINALL PARAMETERS CAN SOMEONE HELP

    Hi Sime JX,

    1. What is the accurate and complete error message you get?
    2. you try to download and install Windows vista Service pack 2 or install through Windows updates?

    Method 1
    I suggest you perform the clean boot and then install Windows 7 service pack 2.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

    Method 2
    I suggest to turn off all antivirus and firewall on the computer and then try the steps from the following link:

    Disable the antivirus
    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
    Note: Microsoft does not recommend that you disable the antivirus protection in most conditions. Disable the antivirus protection that temporarily to restore a computer.

    How to get the latest version of the Windows Update Agent to help manage updates on a computer
    http://support.Microsoft.com/kb/949104

    Method 3
    I suggest you make the SFC scan.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

  • I can't install windows vista service pack 2, receive the error code 490

    Tried to install Windows Vista service pack 2. (KB948465).   Received: Installation failed.      Also: element not found.      Error: ERROR_NOT_FOUND (0 x 80070490).     and finally the code 490 - Windows Update encountered an unknown error.

    Hello

    You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

    http://support.Microsoft.com/kb/958044

    This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

    http://support.Microsoft.com/kb/947366

    Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

    http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  • my laptop is messed up after installing Windows Vista Service Pack 2

    My internet does not work and a message came up saying "internet explore has stopped working, there is a problem, windows will let you know if there is a solution" a box then came advising me to install Windows Vista Service Pack 2 and I did and now my laptop is messed up. After that I connected, a black screen appears then I found a solution in another forum and able to-> explorer.exe task manager and a something regedit and once my computer has restarted after it is a message saying "Windows has encountered a critical problem and will restart automatically in a minute." and internet does more either.
    Help!

    Hi, somehow I managed to fix my laptop using other answers I found on the forums and they were based on what you sent me here. I now have another problem with my laptop on internet access and an error message appears on my firewall is OK, but my University has a firewall up, so I think I need to go see them on this subject. Thanks for your help, thank you very much

  • Re-install Windows Vista Service Pack 1

    Hello, I have recently reinstalled my Windows Vista Home Premium.  Now I am trying to re - install Windows Vista Service Pack 1.

    I had to download it because I couldn't get by a Windows Update.  When I tried to install the Service Pack, I received the following error message: Error Code: 0x8000FFFF.

    I want to upgrade to Windows 7, and then to 10 Windows but I don't think I'll be able to update without Windows Vista Service Pack 1 and 2.

    Can anyone give me any help will be greatly appreciated.

    Thank you.

    Rich

    I have been unable to install SP1 via windows updates but has been able to do it using the suggestions here:
    https://social.technet.Microsoft.com/forums/Windows/en-us/4120f8ff-ae6c-437f-A40D-8d48794d9841/services-Pack-1-for-Vista-Home-Premium-will-not-install?Forum=itprovistasp

    They include two tools running of Microsoft and then by installing SP1 downloaded in a boot environment. After finishing SP2, windows update has provided a new Windows Update Agent, which made it impossible to update. This is my 4th new installation disc from Dell, that started because of this same update to Windows Update Agent. I'm about to give up. If you try to install, I would set a restore point before doing so.

  • When trying to install windows vista service pack 2 I get this error: "Element not found" (0 x 80070490)

    Cannot install windows vista service pack 2

    http://support.Microsoft.com/kb/958044

    You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

    Windows Vista and Windows Server 2008 to solve this problem, you must perform a repair of Windows Vista or Windows Server 2008 installation. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

    Note Run a repair installation will not damage files and applications that are currently installed on your computer.

    To perform a repair of Windows Vista or Windows Server 2008 installation, follow these steps:

    1. Close all applications and restart the computer.
    2. Insert the Windows Vista DVD or Windows Server 2008 DVD into the DVD drive of the computer.
    3. In the settings window, click install now.

      Note If Windows does not automatically detect the DVD, follow these steps:

      1. Click Start

        Collapse this includes this image

        and then type Drive: \setup.exe in the box start the search .

        Note The placeholder drive is the drive letter of the computer's DVD.

      2. In the list of programs , click Setup.exe.
      3. In the settings window, click install now.
    4. Click connect to get the latest updates for installation (recommended).
    5. Type the CD key if you are prompted to do so.
    6. Click Yes to accept the Microsoft software license agreement.
    7. On the which type of installation do you want? of the screen, click upgrade.
    8. When the installation is complete, restart your computer and try again to install updates.

    If the above does not resolve the problem:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Try to install Windows vista Service pack 1 (K936330), need 25 character codes

    Try to install Windows vista Service pack 1 (K936330), need 25 character code.

    You don't need the code to install a Service Pack - what's your real problem?

    Your system shows a non-genuine notice?

    To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
    Once saved, run the tool.
    Click on the button continue, which will produce the report.
    To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
    -* in your own thread *, please

    Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
     http://www.Microsoft.com/howtotell/content.aspx?PG=COA

Maybe you are looking for

  • Unable to boot from a CD

    Greetings. I recently had to replace the hard drive of my iMac to 2012 due to a failure of the original hard drive from catrastrophic. Unfortunately, in doing so, of course, I have to do a complete reinstall of the OS x. Unfortunately, when I try to

  • Satellite Pro A120 - no image on external projector

    Do you have a downgrade for win XP on Satellite Pro A120. If I connect to an external projector I no longer get a picture of it. I tried the shortcut key and it will turn off the picture on the LCD screen of the laptop so the keyboard shortcut works,

  • PERC 6 / i of the RAID1 to RAID10 switching?

    I am running PowerEdge R610 with two 146 GB drives in a RAID1 configuration, with Debian as operating system. I am considering the expansion of total capacity with two extra drives, as the free space becomes low. I can afford some interruptions in se

  • audio device / I have a problem with the audio device from my computer

    No puedo playsecure musica in mi equipo nor any type of audio creo what must an audio to a problema con el device of I can´t listen to music or any audio on my computer. He said that there is a problem with the audio device... I Don t know that I hav

  • Not in line extends from pre-built DS2DB model without database and systems of DS2?

    After a lot of work (mostly struggling with Windows since I was a UNIX Guy: errors with Exchange 2007 starts do not transport hub because IPv6 has been disabled, STAF, refusing on W2K8 connections due to firewall Windows and another problem, I'll pos