How to install Windows XP Pro on W2k on the Satellite Pro 6100?

Hello

I brought a 2nd hand Satellite Pro, model version SP6100 (PS610E-029ZV-EN), P4 1.7 Ghz, 512 MB, 30 GB, with Windows 2000 Pro installed.

I can't connect to my wireless router. The switch is in the correct position.
I have been informed that there could be a conflict between wireless and Win2000 Pro installation. This is why I want to change my WinXP Pro using the key provided with the new laptop (dual operating system). However, I can't reformat using a WinXP Pro disc at first upward, the disc is ignored and Win2000 Pro. If I use the recovery cd (start with holding C and let go when it runs upward), something starts which I presume to be a sequence installation however seconds I see a reference to a (?) drive z, a brief exhibition of three rows of "invalid drive specification" and it still loads Win2000 Pro.

Can someone advise how (or if!) Can I reformat?

Any help will be greatly appreciated.
See you soon.

Advertisement

Eventually it s a bad boot command but most often it after pressing the C button the laptop should boot from the CD.
You said something done drive and I think that the start of the player has been activated, but the drive is not able to read the media.
For me, this looks like a disk failure.

By the way: check in Manager device if your laptop has installed the wireless network card. In my view, that cannot connect to the router WLan because the map has not been installed. The WLan switch is available because the wireless network card is optional for this laptop. You know?

Tags: Toshiba

Similar Questions

  • How to install windows 7 pro, when I mistakenly installed the 32-bit version instead of the 64-bit version

    I just installed windows 7 pro.  Unfortunately, by mistake I installed the 32-bit program on 64-bit program.  now that I try to install the 64-bit, I get the error message: "this installation disc is not compatible with your version of windows.  upgrade I need the disk to correct installation.  so he said to shut down your computer and reboot the installation disc. »

    but when I reboot it just goes directly to the office.  would someone kindly give advice on how I overcame this misadventure?  I know that windows 7 pro on my computer, 32-bit version, but want windows 7 pro 64-bit version.  I still have the discs and software keys... Thank you.
    Prior to this installation, I was running 32 bit XP pro

    You'll need during cratch because there is no way to upgrade a 32 bit OS to a 64-bit version of Windows.

    Check your BIOS to make sure that your DVD drive is set as the first boot device, and then save your settings (if a change was required) and get out.

    With the 64-bit DVD in the DVD drive, restart the computer.

    Choose the "Custom" option and then delete the existing system and Windows partitions, click next to continue the installation,

    Since you enabled the OS using the 32-bit product key most likely you need to activate by phone this time.

    How to activate Windows 7 or Vista manually (activate by phone)
    http://support.Microsoft.com/kb/950929/en-us

    1) click Start and in the search for box type: slui.exe 4
    (2) press the ENTER"" key.
    (3) select your "country" in the list.
    (4) choose the option "activate phone".
    (5) stay on the phone * do not select/press any option * and wait for a person to help you.
    (6) clearly explain your problem to the support person.
    (7) the person must give you a confirmation ID, copy it down on paper,
    (8) check that the ID is correct in reading the support person.
    (9) to enter the ID number, then click 'Next' to complete the activation process.

    J W Stuart: http://www.pagestart.com

  • WHERE to download and how to install windows 8 oem and register with the key from the BIOS

    My friends sony vaio has been formatted it has not support recovery pls tell me WHERE to download and how to install windows 8 oem and register with keys from the BIOS

    My friends sony vaio has been formatted it has not support recovery pls tell me WHERE to download and how to install windows 8 oem and register with keys from the BIOS

    See here, make sure you download the correct edition:

    http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-retail-and-OEM-ISO/

  • How to install Windows 8 Pro cd image in the Windows Deployment Services on the 32-bit version of Windows Server 2008?

    Hello.

    I wanted to ask you for example in Windows Server 2008 32-bit when there are Windows Deployment Service. From there you can add images and then you can install windows on the network. So I wanted to try to do it with the cd Windows 8 Pro where I but I couldn't do that because in the catalog of Sources, I find "install.esd" not "install.wim" how the server or service request, with the cd of Windows 7 you can do, but you can't do that with windows 8 Pro I have buyed haved. I want to try to do this with Windows 8 Pro cd on the network because I have 3 pc at home with Windows 8 Pro and I wanted to try out the service deployment with windows 8 when I need to install pc so I prefer to install it on the network not on cd or etc. P.S. for all PCs with windows 8 pro I have buyed them, I have license key and etc.

    I use the 32-bit version of Windows Server 2008 in thw.

    Hello

    You can view this issue in this help link:

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

    It will be useful.

  • Software assistants! -How to install Windows 7 Pro on my computer software ingenuine?

    Hello!

    Yes, my computer has been "reformatted" with what I knew was ingenuine software... and now my phone won't let me connect to internet or anything! So I decided to do it myself. I bought Windows 7 Pro, and I was just wondering how to install the software.

    I need to remove my computer before installing? How?

    Or can I just put the CD and it configures all this for me?

    I don't want to just put the CD in, incase something does not! So please software wizards - help!

    See you soon,.

    RTSY

    Hello

    You have to boot from the Windows 7 DVD:

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    ____________________________________________

    During the installation process, you will need to delete the partition with the non genuine Windows 7 on it.

    Information is in the link on how to do it and do it again (Sections 7 and 8):

    How to do a clean install:

    http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

    ______________________________________________

    Using this installation method may require phone Activation.

    If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

    "How to activate Windows 7 by phone '

    http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

    The above method also requires that you go to your computer manufacturer's website > Support and downloads Section > locate your model number and operating system > then download and install the latest drivers for it.

    See you soon.

  • How to install Windows 7 Pro 64 bit in English

    Greetings,

    When I enter my key to download the 64-bit version of W7 it says I have to choose a language. The only data options are Korean and French. The key comes from a legitimately purchased English version. How can I get W7 Pro 64 bit in English?

    < original="" title:="" w7="" upgrade="">

    Neha greetings,

    Thank you for your response, the link goes to the site where I got the problem.

    More in hopes that other thing I ' phoned Microsoft. They were extremely helpful, spend an hour trying to find and cure the problem. Even the experts could not operate. The final solution was to provide a new product key. The 64-bit version is now installed and functional.

    I was very impressed by the time spent looking at the problem by the friendly support staff, the investigation, including remote access, the problem has been resolved to my satisfaction and - above all - it's free!

    Kind regards

    Bernard

  • How to install windows xp over vista on a toshiba satellite A200 1YO

    How to install raid/scsi drivers and get rid of vista for good

    you will need

    AT ¢ A? Â ¢ 1 USB external floppy drive
    AT ¢ A? Â ¢ 2 diskettes
    AT ¢ A? Â ¢ 1 set of drivers for the hard disk on the computer
    AT ¢ A? Â ¢ a legal copy of windows xp pro

    WHAT DO WITH DISKETTES

    COPY THE DRIVERS DON'T CUT AND PASTE

    AT ¢ A? Â ¢ DISC 1 and place the drivers required on disk, because they did not all folders
    AT ¢ A? Â ¢ get DISC 2 and make a folder called $OEM$ and in this folder make another one called TEXTMODE then in this case insert the drivers you have in disc 1

    Installation of the drivers and windows xp pro
    AT ¢ A? Â ¢ when windows asks you to press F6 to install the raid drivers, press F6
    AT ¢ A? Â ¢ DISK1 then enter the floppy drive
    AT ¢ A? Â ¢ when it prompts you to press "s" to install the raid and storage controllers...
    AT ¢ A? Press and A ¢ press "s" again to enter on the same raid driver, you just tell windows to use
    AT ¢ A? Windows ¢ A say while there already drivers for the raid controller
    AT ¢ A? Â ¢ press the appropriate key to tell windows you want it to use own disks instead of windows drivers
    AT ¢ A? Â ¢ after loading the disk drivers
    AT ¢ A? Â ¢ wait for windows to ask you once again the drivers then insert DISC 2
    AT ¢ A? Â ¢ and windows finally installed vista WENT you need drivers for any hardware of your computer system, but they should be easy to get from the manufacturers website

    I used this method and it worked with a Toshiba laptop satellite a200 1yo with no problems

    PLEASE LEAVE COMMENTS ABOUT HOW YOU GOT ON TO LET OTHERS KNOW THAT THIS METHOD WORKS THANKS

    Post edited by: tamwilson

    How to install raid/scsi drivers and get rid of vista for good

    you will need

    a? ¢ 1 USB external floppy drive
    a? ¢ 2 diskettes
    a? ¢ 1 set of drivers for the hard disk on the computer
    a? ¢ a legal copy of windows xp pro

    WHAT DO WITH DISKETTES

    COPY THE DRIVERS DON'T CUT AND PASTE

    a? ¢ DISC 1 and place the drivers required on disk, because they did not all folders
    a? ¢ get DISC 2 and make a folder called $OEM$ and in this folder make another one called TEXTMODE then in this case insert the drivers you have in disc 1

    Installation of the drivers and windows xp pro
    a? ¢ When windows asks you press F6 to install the raid drivers press F6
    a? ¢ DISK1 then enter the floppy drive
    a? ¢ When it prompts you to press "s" to install the raid and storage controllers...
    a? ¢ Press "s" again and press enter on the same raid driver, you just tell windows to use
    a? ¢ windows will say while there already drivers for the raid controller
    a? ¢ Press the appropriate key to tell windows you want it to use own disks instead of windows drivers
    a? ¢ After loading the disk drivers
    a? ¢ Wait windows will ask the drivers again and insert DISC 2
    a? ¢ and windows finally installed vista WENT you need drivers for any hardware of your computer system, but they should be easy to get from the manufacturers website

    I used this method and it worked with a Toshiba laptop satellite a200 1yo with no problems

  • How to reinstall windows without losing any data on the Satellite A100

    Hello everyone!
    I have a Toshiba Satellite A100 laptop and would like to reinstall Windows. The disc was divided into 2 parts. WinXp Home is installed on the first.

    What happens with the data on the secondary disk if I use the recovery CD? It will be formatted?
    And if this is the case, how can I reinstall winXP Home without losing the data on the second drive?

    You can install the OS on the first partition only and all data saved on the second partition will not be deleted. To do this procedure of departure recovery and after choosing the language button tablecloth call SETUP. It is placed on the right side.

    If I like what you must remember he chose the second option. The first one can be used when you want to create the new partition (DO NOT choose this one).

    Bye and good luck!

  • How to install Windows 7 on the new hard drive?

    I changed the old hard drive (500 GB) with a new hard dirve (1 Tera) and now I have two problems:-

    1. how to install Windows 7 on a new hard drive?

    2. my laptop came preinstalled Windows 7 Pro, but all the DVD kit (disk reclaimer Application & discs) + Revocer operating system, which has been provided (by Lenovo) for the laptop is in the Windows 8 Pro. So, how to install Windows 7 Pro, my laptop while all the DVD sets are in Windows 8 Pro?

    either way, this is my laptop spec (for reference); -

    * Note *.
    I intend to install Windows 7 Pro on my new hard drive using another DVD of Windows 7 (not DVD provided by Lenovo), but how do all Leveno program located in the disk 'Application & recuperator readers' (by example; - Lenovo system health and Diagnostics, Lenovo Power Control, Lenovo Fingerprint Reader) to install this hard drive? (as I told you before, all the DVD kit is at or only for Windows 8 Pro)

    I hope someone will help me answer my question,
    Thank you

    I found the solution.

    Response to question 1; using a recovery & backup software to clone my current operating system, and then transfer them to my new hard drive.

    Response to question 2; Download all drivers and software (all the application that located on the DVD of the kit I have) on the official website of Lenovo.

    or another solution, send to a computer service shop and let the experts (workers) install it for me (the most simple and sure way).

  • How to install windows 8 in freedos?

    Hey, I bought a HP 15 g009ax of flipkart with FREE DOS as the operating system, I do not know how to use freedos and install windows 8. Its just sitting there without being used. How to install windows? Please advice or help the guy?

    I have a copy of win8 on USB, when I try to boot from USB, It tradingtextile.com displays a message like: "error in the operating system.

  • HP 6200 pro (XY107ET) how to install Windows 7?

    I have a problem with a HP 6200 Pro: how to install Windows 7 from Microsoft CDs?

    Yes a free recovery of HP, but with an installation CD installation cleaned of all unnecessary software pre-installed.

    I tried with my Win 7 CD: it seems to install Win 7 but at the first reset, the machine stays on the black screen (Hit any key to boot from CD).

    I tried to install the AHCI drivers saying Win7 to load this driver from a USB, but the result is the same.

    I had a problem with a hp siilar 8200 commented: the operating system in this case was Windows XP, but the procedure was not easy...

    I solved the problem!

    It 'wasn' t a SATA problem, I know that 7 can be installed on almost all new computers without having to install the SATA AHCI drivers, but in this facility it seemed to not work.

    I used a disc of Windows 7 without SP1 and it worked everything; the OS disk downloaded from digital river to give driver problems.

  • MSVCR71.dll missing. I installed Windows 7 Pro to Vista Home Edition. EU back up my HARD drive. When I try to put things on the HARD drive I get the message that msvcr71.dll is missing. How to install Windows 7?

    I installed Windows 7 Pro to Vista Home Prem Edition.  Back up my HARD drive with the included HP software.  Now I can't get my info on the HARD drive.  When I try to open the computer file backup says msvcr71.dll is missing.  How to install and where?

    Hi dezertdawg,

    Welcome to the Microsoft Answers site!

    Msvcr71.dll errors are caused by situations that lead to the removal or corruption of the msvcr71 DLL file. In some cases, the msvcr71.dll errors might indicate a
    problem of registry, a virus or malware problem, or even a hardware failure.

    You can use the tool (SFC.exe) System File Checker to ensure that the system files are intact and replace the file. Follow these steps:

    1. Click Start and type cmd in the box start the search.

    2. right click on cmd in the list programs and then click Run as administrator.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue

    3. at the command prompt, the following line, and then press ENTER:

    sfc/scannow

    http://support.Microsoft.com/kb/929833

    Kind regards
    Amal-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to install adobe acrobat pro XI in windows?

    How to install adobe acrobat pro XI in windows?

    Hi Adhanie

    Download the free trial version at the bottom of the link: http://www.adobe.com/cfusion/tdrc/index.cfm?product=acrobat_pro&loc=us

    You can use it for 30 days...

    If you have the serial number, use it to activate it

  • How to uninstall Windows XP PRO so that I can install Windows Pro 8.1?

    Problem? My Windows XP PRO is not listed in the control panel. (The system came with the new computer).

    I want to uninstall, & replace it with Windows 8.1 pro (disk).

    Is it done in safe mode? Also how a clean uninstallation is completed?

    MS says that an upgrade is not possible (since '23 programs, etc. need attention').

    All advice appreciated. Best regards, Doug

    Original title: how to uninstall Windows XP PRO, which is not listed in the control panel?

    Of course, it is not in the control panel. This isn't how it works. You must reformat and perform a new installation of Windows 8.

    Your computer will not be able to be upgraded. You must consult the computer manufacturer to see if there is even the disks available to this end for Windows 8. Probably not.

    And, even if all the drivers were available, you always have to reinstall ALL your programs and data on the medium of origin or files and backup of the date.

  • How to install Windows 10 on mac not supported

    Hi all

    I have a MacBook Pro 15 inch 2011 lag and I try to install Windows 10. I've tried 3 different methods. I can provide more information if necessary.

    I had running Windows for 10 minutes (2 reboots) until he got stuck on the screen to start due to an unknown error (probably error compatibility)

    I am currently give up and try to install Windows 7 instead, hoping that he'll be fine

    If any of you guys have any suggestions please tell me this is greatly appreciated!

    I am currently give up and try to install Windows 7 instead, hoping that he'll be fine

    I don't think that you can install Windows 7 with Boot Camp on El Capitan:

    • A Microsoft Windows installation media or disc image (ISO) containing a 64-bit version of Microsoft Windows 8 or later *.

    From: How to install Windows using Boot Camp - Apple Support.

    Windows 10 is simply too new for your Mac, and Windows 7 is too old. It is quite a difficult situation. If you really need Windows, you would need to get a copy of Windows 8, or put to level to an earlier version of Mac OS X with a version of Boot Camp that works in Windows 7.

Maybe you are looking for

  • HP Mini 110-1006TU: BIOS password

    BIOS password reset HP Mini 110-1006TU Serial number:-[personal information] Product number:-VB696PA #ABG Operating system with version:-Windows XP 32-bit

  • Folio 13 BIOS password

    Folio 13 BIOS password reset # 55094825

  • A video of the file change date

    This question relates specifically to a video that is downloading. What happens in the video for the file modified date to change? I have about 10 videos and they all have one updated the date after the date of creation.  I need to understand all the

  • BlackBerry smartphone address book entry number categories (work, mobile etc.)

    I bought a PEAR of BlackBerry 8110 yesterday and AT & T put the form of Sim Card from my iPhone in my new BlackBerry Pearl 8110 and loaded my contact entered on this one for some reason any of all the entries came under "Work" my question is, and I'm

  • HP2000 update of the Qualcomm AR9485 driver on the connections

    My computer is a hp 2000 notebook product number e0m17uar.  It worked very well with the 8.1 upgrade victory and gthen I got updates from HP.  A; pparently, one of them was the driver Qualcomm Artheros AR9485.  I've been on the web, and as it install