How to install XP on HDD2 and keep Vista on HDD1 in Satellite A200-23W?

Similar Questions

• How can I install a new motherboard and keep the version OEM of Windows active?

  Windows and the new motherboard OEM

  I bought a computer with a version of Vista OEM.  Since then, I've upgraded to Windows 7.

  My motherboard needs to be replaced.  I understand that the Windows OEM is related to the motherboard.

  How can I install a new motherboard and keep what is on my current hard drive?

  See if this helps:

  "How to replace the motherboard on a computer that is running Windows Server 2003, Windows XP, or Windows 2000"
    <>http://support.Microsoft.com/kb/824125 >

  HTH,
  JW

• How to install volume control program and retrieve the sound icon in the start bar

  How to install volume control program and retrieve the sound icon in the start bar

  He runs this Microsoft Fixit usually solves http://support.microsoft.com/kb/319095

• How to move the MSWMM files and keep the data on my computer?

  I downloaded digital film from my camera to a destination on my D drive as a file MSWMM (collections), and whenever I try to move the downloaded film (collection), it does not recognize the movie more.

  How to move the MSWMM files and keep the data on my computer?

  The mswmm file is the project file, not a video.
  Think of it as a recipe for a cake, it only tells you what to do with the ingredients, but does not include the ingredients.
  The mswmm file tells the computer to look in a certain folder to use a video or audio file.
  If you move the file, then MM knows not where is the file, then you must tell it, by right clicking on a red x on the timeline and then choose search for the file.

• using a hp 6500 - how to scan several image documents and keep them in a single image file

  using a hp 6500 - how to scan several image documents and keep them in a single image file instead of hafving to create a separate file for each page?

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-OfficeJet-6500-scan-multiple-pages-into-one-PDF-file/TD-p/252650

  This previous thread should help you.

• I would like to know how to install Windows Server 2008 and Windows 7 Enterprise from a USB key, please.

  I would like to know how to install Windows Server 2008 and Windows 7 Enterprise from a USB key, please.

  I'm not trying to run either on the USB key, I just need to know how to install from a USB key. I tried Multiboot, grub for DOS and other, but they do not seem to work :/

  I am going through a book that uses these two to form Microsoft MCITP: Server 2008 Administrator and if I could install these Via USB, this would save my records and a lot of hassle... basically just for convenience, as everything that I need will be on a stick * lol *.

  Otherwise, I'll have to use discs instead :)

  Take a look at this:

  http://www.Haiders.NET/post/installing-Windows-Server-2008-from-a-USB-Flash-pen-drive.aspx

  Like to make a bootable USB with WIndows 7, take a look to use the following:

  Download Windows 7 USB/DVD tool

  http://store.Microsoft.com/help/ISO-tool

• WHERE to download and how to install windows 8 oem and register with the key from the BIOS

  My friends sony vaio has been formatted it has not support recovery pls tell me WHERE to download and how to install windows 8 oem and register with keys from the BIOS

  My friends sony vaio has been formatted it has not support recovery pls tell me WHERE to download and how to install windows 8 oem and register with keys from the BIOS

  See here, make sure you download the correct edition:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-retail-and-OEM-ISO/

• Everytime I open Photoshop CS2, it starts as if it were the first time.  All the settings are default and it asks me to register even though I already have.  How do I save my settings and keep his memory?

  Everytime I open Photoshop CS2, it starts as if it were the first time.  All the settings are default and it asks me to register even though I already have.  How do I save my settings and keep his memory?

  Right-click on the exe to PS file and choose Run as administrator. I think you choose the option "check mail", it will not ask again.

• How to install windows xp over vista on a toshiba satellite A200 1YO

  How to install raid/scsi drivers and get rid of vista for good

  you will need

  AT ¢ A? Â ¢ 1 USB external floppy drive
  AT ¢ A? Â ¢ 2 diskettes
  AT ¢ A? Â ¢ 1 set of drivers for the hard disk on the computer
  AT ¢ A? Â ¢ a legal copy of windows xp pro

  WHAT DO WITH DISKETTES

  COPY THE DRIVERS DON'T CUT AND PASTE

  AT ¢ A? Â ¢ DISC 1 and place the drivers required on disk, because they did not all folders
  AT ¢ A? Â ¢ get DISC 2 and make a folder called $OEM$ and in this folder make another one called TEXTMODE then in this case insert the drivers you have in disc 1

  Installation of the drivers and windows xp pro
  AT ¢ A? Â ¢ when windows asks you to press F6 to install the raid drivers, press F6
  AT ¢ A? Â ¢ DISK1 then enter the floppy drive
  AT ¢ A? Â ¢ when it prompts you to press "s" to install the raid and storage controllers...
  AT ¢ A? Press and A ¢ press "s" again to enter on the same raid driver, you just tell windows to use
  AT ¢ A? Windows ¢ A say while there already drivers for the raid controller
  AT ¢ A? Â ¢ press the appropriate key to tell windows you want it to use own disks instead of windows drivers
  AT ¢ A? Â ¢ after loading the disk drivers
  AT ¢ A? Â ¢ wait for windows to ask you once again the drivers then insert DISC 2
  AT ¢ A? Â ¢ and windows finally installed vista WENT you need drivers for any hardware of your computer system, but they should be easy to get from the manufacturers website

  I used this method and it worked with a Toshiba laptop satellite a200 1yo with no problems

  PLEASE LEAVE COMMENTS ABOUT HOW YOU GOT ON TO LET OTHERS KNOW THAT THIS METHOD WORKS THANKS

  Post edited by: tamwilson

  How to install raid/scsi drivers and get rid of vista for good

  you will need

  a? ¢ 1 USB external floppy drive
  a? ¢ 2 diskettes
  a? ¢ 1 set of drivers for the hard disk on the computer
  a? ¢ a legal copy of windows xp pro

  WHAT DO WITH DISKETTES

  COPY THE DRIVERS DON'T CUT AND PASTE

  a? ¢ DISC 1 and place the drivers required on disk, because they did not all folders
  a? ¢ get DISC 2 and make a folder called $OEM$ and in this folder make another one called TEXTMODE then in this case insert the drivers you have in disc 1

  Installation of the drivers and windows xp pro
  a? ¢ When windows asks you press F6 to install the raid drivers press F6
  a? ¢ DISK1 then enter the floppy drive
  a? ¢ When it prompts you to press "s" to install the raid and storage controllers...
  a? ¢ Press "s" again and press enter on the same raid driver, you just tell windows to use
  a? ¢ windows will say while there already drivers for the raid controller
  a? ¢ Press the appropriate key to tell windows you want it to use own disks instead of windows drivers
  a? ¢ After loading the disk drivers
  a? ¢ Wait windows will ask the drivers again and insert DISC 2
  a? ¢ and windows finally installed vista WENT you need drivers for any hardware of your computer system, but they should be easy to get from the manufacturers website

  I used this method and it worked with a Toshiba laptop satellite a200 1yo with no problems

• Satellite A200 23W: XP-> Bluetooth question and mass storage controller

  Hello

  I have a satellite A200-23W and just installed Windows XP SP2 and the problem is:

  1. that i can't see the anyware bluetooth (I istalled the monitor bluetooth from the web site of the Union European toshiba)

  2. also, in Device Manager, I see that the mass storage controller needs new drivers but I can't find?

  Thank you

  Alex

  Hello

  With regard to the point;

  (1) the laptop supports BT certainly then have you installed Bluetooth driver too?
  BT monitor is a utility to control BT, but to use the BT, you need the BT stack!

  (2) this unit is probably the module of Robson former Turbo Memory.
  This material is only supported by Windows Vista.
  There is therefore no Windows XP driver.

  See you soon

• How to install windows server 2012 and windows 7 or 8 on the same computer

  Hi, I want to install windows 7 or 8 and on the same computer that I want to install windows server 2012 or 2008 I have not decide which one to buy again, and my question is, at the time where there was windows xp and windows me (x 9) for example, you must install first as millennial basic then install xp on another partition in my case I want to know is - it possible to do it without the virtual machine, and if this is the case, which windows must be installed first as the basis...

  Thanks a lot for taking time reading this, looking forward to your reply...

  You will need to ensure that the old version of Windows is installed first of all, in this case (Windows 7), then you can install Windows 8 or Windows Server 2012 after on logical partitions. Please see the following:

  See the following for how to dual boot Windows 7 and Windows 8 (the same principles can also apply to Windows 7 and Windows Server 2012)

  How dual boot Windows Vista/7 and Windows 8

  If you plan to have all three installed, make sure that configure you partitions in advance with ample space for all three.

  See:

  http://notebooks.com/2011/02/25/how-to-create-a-simple-partition-in-Windows-7-quick-tip/

• How to install the compiler weblogic and froms in redhat 6

  Dear gurus,

  I have db oracle 11.2.0.1 on redhat Version 6 and I develop forms/reports (Forms [32 bit] Version 11.1.1.2.0 (Production)) under windows, all operations are working well until I have access the form via the Internet Explore.

  Now I want to spend the only form of publication in RedHat server, I'll develop forms in windows and then move on to the RedHat server to access forms of RedHat server.

  My question is

  (1) what steps/facilities do I need to compile forms in RedHat make compatible FMX for RedHat file server.

  (2) what steps/facilities I have to publish to / reports in RedHat 6 so users can access them from RedHat server.

  I'm not very good in all those things I always get information on internet and perform my tasks. Help, please.

  Thanks in advance.

  Mr. Khurshid Khurram

  Hi Khurram

  Please follow the doc ID and the following documentation: -.

  (1) what steps/facilities do I need to compile forms in RedHat make compatible FMX for RedHat file server.

  How to install Oracle Fusion Middleware 11g forms & reports only [ID 854117.1]

  How to install Middleware 11 g Rel 1 Oracle Forms / Reports Services alone [Video] [1088873.1 ID] --> this one is good

  For the compilation: check belo note:

  Batch compile the Script for forms, reports, libraries, Menus and also the conversion of binary and text (Doc ID 955143.1)

  (2) what steps/facilities I have to publish to / reports in RedHat 6 so users can access them from RedHat server.

  http://docs.Oracle.com/CD/E23943_01/Web.1111/e10240/TOC.htm

  http://docs.Oracle.com/CD/E23943_01/bi.1111/b32121/TOC.htm

  Kind regards

  Prakash.

• How to install IE6 on one and IE7 on another Windows Server 2008 R2 standard.

  There are two servers. I need to install IE6 on one and IE7 on another Windows Server 2008 R2 standard. There is no option to delete the current version and downgrade. I tried the steps listed on http://www.enhanceie.com/ua.aspx and it made not usable IE.

  Hello

  Given that the problem is related to Windows Server 2008, I suggest you post this question in the Windows Server Forums.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• How to install Service Packs 1 and 2 without errors

  original title: Vista service pack 1 installed, error, blue screen. Fixed, now what do I do to install service pack so that it will not happen again.

  I want to know what to do to install service pack 1 and 2 safely so that my computer crashes again. He did the first time.

  This is the recovery and repair of Vista Forum.

  http://support.Microsoft.com/kb/948465/en-us

  Information about Service Pack 2 for Windows Vista and Windows Server 2008

  You will get the best help for any update / problem ofService Pack in theWindows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• How to install Service Pack 1 for Windows Vista?

  Please can someone help me on how to install service pack 1 for vista. I have tried almost everything, but no matter what I try it givng custody me of error codes. When I tried with automatic updates, it says download 0% done but no matter how long I leave it still says 0% done. I want it only on cos I bought the game and it does not load and when I checked for solutions it says I have to install service pack 1, which is impossible.when I won't to updates, it shows me it's there but it won't install it. I also tried tried to install with 5 independent languages, I think it was called and said, but when he got to the end I got another error code my computer came 7201 laptop computer and put aside this 1 problem everything works fine also I just bought this for £79.99 fom a 2nd hand shop have I got it for a bargain or I haven't paid on the side im guessing it is a good deal but I know very few calculates and im not big on their use

  original title: VISTA SERVICE PACK 1 PROBS

  Hello

  wrong forum for your question

  and when repost you it give error code when you use the stand-alone SP1 download

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all