How to intercept the radio button was selected and its data?

Similar Questions

• How to get the specific information of hardware and software data center

  How to get the specific information of hardware and software data center with powercli...

  What kind of information you need?

  No matter what Esxi host hardware info., if so could below thread is useful.

  Information about the host material with information on the nic and HBA drivers

• How to check if the radio button is selected?

  Hi, I know how to select the radio button, but the question is - how to check if this radio has been selected?

  to select the option button, I use:

  _root.rb_choice_1.selected = true;

  And I thought that checking its status should be similar, but it does not;

  {if (_root.rb_choice_1.Selected)}
  trace ("delivering choice 1");

  }

  and this does not work, too:

  if(_root.rb_choice_1.Selected == true) {}
  trace ("delivering choice 1");

  }

  What I am doing wrong?

  This will work.  Just change allowed to selected if you are using the correct property.

• How to use the Radio button

  Hello
  
  In my form, I want the radio button.
  
  On the selection of this radio button user can change the status of "QC" for "STOCK".
  
  Initially, when he disabled status should be "QC".
  
  How to put this in my form guide me please.
  
  
  Maury

  Make a group of Radio (say RADIO_GROUP16) with 2 buttons radio (mean RADIO_BUTTON17 and RADIO_BUTTON18).

  Specify the initial value of Radio group to U
  Specify the value of Radio to R and U buttons

  and in the status field to write after outbreak.

  If: block. RADIO_GROUP16 = 'U' then
  message ("can not update status '");
  raise FORM_TRIGGER_FAILURE;
  end if;

  I guess that when you select the second radio button (with the 'R' value) then only you would be allowed to change the status.

  Please check the answer correct/useful if th answer was helpful

• How to make the Radio buttons switch automatically?

  Hello
  
  I have this code, all I want to do is make each JRadioButton be verified every time that the expiry of the timer.
  can you please take a look at my actionPerformed and tell me what I'm missing?
  
  Thank you.
  

  package kash;
  
  import javax.swing.*;
  import java.awt.*;
  import java.awt.event.*;
  import javax.swing.border.BevelBorder;
  import javax.swing.border.Border;
  import javax.swing.border.TitledBorder;
  import org.jvnet.substance.skin.SubstanceRavenLookAndFeel;
  
  public class ModulesInnerPanel extends JPanel implements ActionListener {
      
    protected ButtonGroup appChoserGroup;
    protected JRadioButton payRollRB;
    protected JRadioButton scRb;
    protected JRadioButton cashNbanksRb;
    protected JRadioButton outSourcingRB;
    private JButton enterButton;
    private Timer t;
    
    
      public ModulesInnerPanel() 
     {
       setLayout(null);
       setBackground(Color.RED);
       setOpaque(true);
       //BORDER
       Border bevel = BorderFactory.createBevelBorder(BevelBorder.RAISED);
       Border b = BorderFactory.createTitledBorder
               (bevel, 
                "User's Modules",
               TitledBorder.DEFAULT_JUSTIFICATION,
               TitledBorder.DEFAULT_POSITION,
               new Font("Helvetica", Font.BOLD,  16),
               Color.white);
       setBorder(b);
       //END BORDER
       
       //RADIO BUTTONS
       appChoserGroup = new ButtonGroup();
       
       payRollRB = new JRadioButton();
       payRollRB.setText("Payroll");
       payRollRB.setBackground(Color.DARK_GRAY);
       payRollRB.setForeground(Color.white);
       payRollRB.setSelected(true);
  
       scRb = new JRadioButton();
       scRb.setText("Stock control");
       scRb.setBackground(Color.DARK_GRAY);
       scRb.setForeground(Color.white);
  
       cashNbanksRb = new JRadioButton();
       cashNbanksRb.setText("Cash and Banks");
       cashNbanksRb.setBackground(Color.DARK_GRAY);
       cashNbanksRb.setForeground(Color.white);
  
       outSourcingRB = new JRadioButton();
       outSourcingRB.setText("Outsourcing");
       outSourcingRB.setBackground(Color.DARK_GRAY);
       outSourcingRB.setForeground(Color.white);
  
       enterButton = new JButton("Enter");
       enterButton.addActionListener(new ActionListener()
       {
           public void actionPerformed(ActionEvent e)
           {
              if (payRollRB.isSelected())
              {
                JOptionPane.showMessageDialog(null,"Application under construction", "Info", JOptionPane.INFORMATION_MESSAGE);
              }
              else if (scRb.isSelected())
       JOptionPane.showMessageDialog(null,"Application under construction", "Info", JOptionPane.INFORMATION_MESSAGE);
              else if (cashNbanksRb.isSelected())
       JOptionPane.showMessageDialog(null,"Not available", "Info", JOptionPane.INFORMATION_MESSAGE);
           }
       });
  
       //adding Radio Buttons to the Radio Button group
       appChoserGroup.add(payRollRB);
       appChoserGroup.add(cashNbanksRb);
       appChoserGroup.add(scRb);
       appChoserGroup.add(outSourcingRB);
       //END RADIO BUTTONS
       
       //SETTING LAYOUT
       Dimension d1 = new Dimension();
       d1 = payRollRB.getPreferredSize();
       
        Dimension d2 = new Dimension();
        d2 = scRb.getPreferredSize();
        
        Dimension d3 = new Dimension();
        d3 = cashNbanksRb.getPreferredSize();
        
        Dimension d4 = new Dimension();
        d4 = outSourcingRB.getPreferredSize();
        
        Dimension d5 = new Dimension();
        d5 = enterButton.getPreferredSize();
        
       payRollRB.setBounds(20, 20, d1.width, d1.height);
       scRb.setBounds(20, 40, d2.width, d2.height);
       cashNbanksRb.setBounds(20 , 60, d3.width, d3.height);
       outSourcingRB.setBounds(20, 80, d4.width, d4.height);
       enterButton.setBounds(20, 150, d5.width, d5.height);
       //END SETTING LAYOUT
       
          //ADDING ITEMS TO THE PANEL
          add(payRollRB);
          add(scRb);
          add(cashNbanksRb);
          add(outSourcingRB);
          add(enterButton);
          
          t = new Timer(500,this);
          t.start();
     }
      
      public void actionPerformed(ActionEvent event)
      {
             
            if (payRollRB.isSelected())
            {
              
              scRb.setSelected(true);
            }
            
          if (scRb.isSelected())
          {
            cashNbanksRb.setSelected(true);
          }
            
          if (cashNbanksRb.isSelected())
          {
            outSourcingRB.setSelected(true);
          }
          
          if (outSourcingRB.isSelected())
          {
            payRollRB.setSelected(true);
           
          }
      } 
  }

  I want the option buttons to change the selection one after the other (...)

  Ok. So, use the block if/then/else, as suggested in my previous answer (I added that, in your NBS and it worked).

  When the user presses enter switching must stop and it should have control over the Group of radio buttons.

  Then, you should stop the timer in this button actionPerformed.

  Kind regards

  J.

• How to get the Radio button value after submit process

  I have a button called (P8_DELETED_RECORD) that has 2 choices (Yes and no) and would like to have my "anonymous PL/SQL block" after presenting the process run logic differenct depending on whether Yes or no is selected.
  
  How can I referecne the option button in the code, I tried several ways without having had no success.
  I tried:
  a. if: P8_DELETED_RECORD = "1" then
  b. if: P8_DELETED_RECORD_0 then
  b. if: P8_DELETED_RECORD_0 = 'Y' Then
  
  
  Using Apex 3.2.
  Thank you

  Hello

  Inside of your radio, what is your lov

  STATIC2:Yes; 1, none; 0

  in this more top of case, you can use the code below

  If: P8_DELETED_RECORD = 1 then
  ---
  end if

  When the value of your lov return changes in 'yes' or 'y' depending on whether you have to change the condition

  Thank you
  Loga

• How to disable the radio button to the page

  Hi all
  We have a requirement to disable or hide a button on the standard page Noritifacation reassign in R12.
  The page is/oracle/apps/fnd/wf/worklist/webui/NotifReassignPG.
  When I went to 'Customize Page', I see a "messageComponentLayout", when I put the property "Rendering" to "false".
  He hides the complete available, but I want to just hide only a single radio button in this provision.
  Can someone please?
  
  Thank you
  Dilip

  Dilip salvation,

  When you click on the link of customization on the OPS page, you can click on full view to display all possible customizations
  This can be done.

  Expand the full view and see if you can find the option button that you want to hide.

  If you are not able to find it, then you can try using controller extension (extension of CO)

  Enter the bean of your controller class processRequest() radio button and hide.

  The extension of controller code-sharing:

  {
  OAMessageRadioButtonBean testButton = (OAMessageRadioButtonBean) webBean.findChildRecursive ("RadioBttn1"); RadioBttn1 is the ID of RadioButton
  testButton .setDisabled (true);

  }

  Kind regards
  Had

• How can I see the option buttons all select and synchronize in the RAW window?

  Hello, after having recently update plugin bridge, I noticed that when I open the RAW window boxes to select all option and Synchronize are no longer visible in the upper-left corner as they were in previous versions. Is there a way to get these? Thanks for any help.

  No there is no way to get back the buttons. You need to click on the menu or use the shortcut keys: ctrl/cmd + A to select all and alt/opt-S for synchronization.

• Using the calendar function to select and read data from MS access tables?

  Hello

  I woke up in the learning of database in no time. I'm using Labview 9 to create a table based on DDMMYY hhmmss format. I can write data to the table in access. The picture will be 24 hours before a new table will be created. However, I find that this concept is not very gd as time goes by, I'll have a lot of paintings for example after 6 months.

  1.I would like to create a calendar (similar to the system clock) in labview, through which the user can click and select, which will then open and retrieve the data. Inorder to do I think I need to create queries and the relationship in MS Access? can any1 advice? Please give as much detail as possible.

  2.i can access data and display in labview. However, I want to display the data and plot in the chart. For instance, coloum b, c and trace on the graph in a proceeding for the analyst.

  3. how to generate a report to an email in a file to document the daily data inserted. I can do it in labview?

  Any help would be much appreciated.  If you have examples of code and don't mind not to share, I would be very grateful.

  Thanks 1million

  
  

• Cluster (buttons and the radio channel controls) - select the right file

  I have a list of text files and I need to select and open an of based on radio button selection.  How to sync the radio button with control of the chain so that I can get the name of the control of the chain and open the right file name?

  The attached vi does not work as I would like.

  Edit: Or is there a better way?

  Depends on the source of the list of files.  If you embed it in LabVIEW via a table or another method, then obviously a recompilation must be made.

  If the list of files will come from a specific directory, then simply read the list of the files from there when starting of the VI (see example).

  Or you could store the list in the text file and read the file at the start of the VI.  You can edit the text at any time without recompilation.

• resize the radio button

  Hello

  How to resize the radio button face before image.i am using labview 8.6

  "" To create a resizable option button, right click on the option button control and selectreplace"classic"Boolean Classic'Round/Square option button. "" You can also place a Radio button Classic Round/Square directly on the front panel or in the box of radio buttons by right-clicking on the front panel to display the controls palette and selecting classic "Boolean Classic'Round/Square option button. This new radio button is now resizable.

• Text in the radio button field triggers?

  I'm sure it is a simple and I just have a moment on Monday, but I can't seem to find it by searching on the forum...

  I have created a pdf form and I want an option button to automatically check when someone types the text in a certain area - how can I do this?

  I would be put in place so that none of the fields in each section can be filled-in unless one of the radio buttons is selected. If space fields are displayed if this option button is selected and the same thing with the hull of the Pre-Built program fields. You can do it in show/hide fields, and you would also want to reset the fields when they are shown/hidden. Coding can be greatly simplified if you use a field hierarchical naming system for the two groups. For example, fso.width, fso.depth, fso.area, fso.a$, etc. and pss.width, pss, depth, etc.

  You can then hide all fields selection of pre-designed Shell Scheme programs and reset and display all the fields only area and reset them with the following:

  Hide all fields selection of pre-designed Shell Scheme programs and reset the

  getField("pss").display = display.hidden;

  resetForm (["SSP"];

  Hide all fields only space floor and to reset

  getField("fso").display = display.visible;

  resetForm (["Fos"];

  This is not complete, but should help you get started. Note that you can set up A$ fields so that they are automatically calculated according to the value of the Total m2 field, so that the user doesn't have to come in and maybe make a mistake. You can also configure the computed fields to display a value only if the width and depth fields are completed.

• How you gray out / disable fields in an option button if another radio button is selected in Adobe Acrobat Pro XI?

  How you gray out / disable fields in an option button if another radio button is selected Adobe Acrobat XI Pro?

  I have created a form where the user has three options to make a payment.

  1. charge on my credit card
  2. costs related to the bank account
  3. By check or money order

  My problem is, under each option, there are required fields that must be filled. So if the user chooses the first option, charges on my credit card, they would fill in the mandatory fields (card credit number, expiry etc.). But when they click on the "submit" button to send the form, he won't let them, because there are a of the fields required in the title of the second the second option, the costs related to the costs related to the bank account. Is there a way to gray out or disable the other two payment options when it is taken. I guess I'll have to use javascript, but what would be the coding and what field do I write under?

  Thanks in advance guys

  I do all the fields that are not required until the user selects the relevant box.

  For example, as soon as the user selects the credit card radio button, only credit card fields are required.

  It could be the script to make the credit card required/not required fields:

  var r = this.getField("PaymentMethod").value;     Use the name of the radio here group

  var CCfields is ['Field1', 'Field2', 'Field3'];.         Enter the names of the fields of credit card here

  If the user has chosen credit card as payment method, make the required credit card fields

  If (r == 'Credit Card') {}

  for (var i in CCfields) this.getField(CCfields[i]).required = true;

  }

  Else, no required credit card fields

  else (var i in CCfields) this.getField(CCfields[i]).required = false;

  You should do something similar for other types of 2 payment, for example

  If (r == "Bank account") {}

  do something

  }

  etc.

  ......

• Average of the radio button selections, but exclude the equation 0

  This should be simple.  I've seen a lot of posts which should have led me to a Twitter.com response, but I still have trouble.

  Here we go:

  (1) I have 9 groups of radio buttons named: GMR1. 1_Score; GMR1. 2_Score; GMR1. 3_Score; GMR1. _Score 4; GMR1. 5_Score; GMR1. 6_Score; GMR1. 7_Score; GMR1. 8_Score; GMR1. 9_Score

  (2) each group of option buttons buttons 4 with the same values in each group:

  • "NA" where I put the Radio button choices under the Options tab = 0
  • "Fair" where I put the button choice Radio under the Options tab = 1
  • 'Good' where I put the Radio button choices under the Options tab = 2
  • 'Great' where I put the Radio button choices under the Options tab = 3

  Thus, the shape looks like a little at:

  GMR1. 1_Score

  • NA
  • Just
  • Good
  • Large

  GMR1. 2_Score

  • NA
  • Just
  • Good
  • Large

  and so on.  The user chooses a 1 option for each question.

  My goal is to get an average that excludes the selections of NA.  Compared with this average, I want to assign the specific text to appear.

  If I did it in 2 steps in excel, my formulas could look like:

  C7 = SUM (range) / COUNTIF (range, "> 0")

  = IF (C7 < 2, "overall score is fair, IF (C7 < 3, 'Overall rating is good', IF (C7 > = 3,"overall score is great!")))

  I think to that the following should work to count all selections does not match "NA" by excluding getField ("GMR1." + i + "_Score") .value == 0 a counter like the one below, but it is not!

  (The here's how I'm playing the part of the excel formula COUNTIF)

  ****************************

  var counter = 0;

  for (i = 0; i < = 9; i ++)

  {

  If (getField ("GMR1." + i + "_Score") .value == 1) counter ++;

  If (getField ("GMR1." + i + "_Score") .value == 2) count ++;

  If (getField ("GMR1." + i + "_Score") .value == 3) counter ++;

  }

  If (counter > 0) {}

  Event.Value = counter;

  } else event.value = "";

  ****************************

  The Sum (range) is simple enough using the "value is the sum "on the calculation of the properties of the text box tab.» But if I wanted, it's all happening in a block of code, then that won't work for me.

  ****************************

  The assignment of text based on the value average; I haven't got there yet.

  ****************************

  Help, please.  There must be a way to do all this in a fairly simple code that is simply eluding me.

  See if to change this instructs the following assistance:

  for (i = 1; i< 10;="" i++)="">

  It should have been an error in the JavaScript (Ctrl + J) console which provides clues as to what is wrong.

• code to select the radio button according to requirement

  I need a code that selects a certain radio button according to requirement...
  also how disable the option button using codes...

  Hello

  To select a particular option button, assign the value of this radio button in the Radio button group.

  And to disable a particular option button, write,

  SET_RADIO_BUTTON_PROPERTY('', '', ENABLED, PROPERTY_FALSE);
  

  Kind regards

  Manu.

  If my answer or the answer to another person has been useful or appropriate, please mark accordingly