How to keep or make the area outside the transparent cutting tool. Mine is white

Similar Questions

• How to keep or make the area outside the transparent cutting tool. For me he is white and comes when I print

  I like to use the cutting tool and the photo frames.  For example, I use an oval frame that leaves the edges of the original outside the image. Initially the air transparent edges, but they are white and show when I print I do not have a completely white background

  How to make the box really transparent outside - or adjust?

  rross43 wrote:

  I like to use the cutting tool and the photo frames.  For example, I use an oval frame that leaves the edges of the original outside the image. Initially the air transparent edges, but they are white and show when I print I do not have a completely white background

  How to make the box really transparent outside - or adjust?

  If you save your picture in jpeg format, you cannot have transparency. The jpeg format simply doesn't support transparency. You must save in .png, .psd, .tiff formats.

  Note that the layer "background" in the layers palette must be transformed into a 'standard' layer to keep the transparency. Menu layer > New > layer.

• How to keep track of the answers of the quiz of the learner? cpQuizInfoAnswerChoice?

  I want to keep track of the responses of the learner throughout of a quiz, so that at the end of the quiz I can provide feedback on what topics need futher study (topics related to issues they are is wrong). I think that the system variable that contains this information is 'cpQuizInfoAnswerChoice', but how I call it for each of the individual issues? Help!

  You will need just to another variable of system: cpQuizInfoLastSlidePointScored and as cpQuizInfoAnswerChoice, it is a variable that changes its value after each slide of the question, you so need once again user variables to store and identify the score for each slide.

• How to keep track of the lines that I add to a table so that I can update more later or remove them?

  A > the form has a set of field and text dropdown list entries.  After the user updates the data in a specific text, change field, I need to add their data to a table on the first time through.   There are many different games of entries that would each have their own line.

  B > later the user comes back and changes the data in a field.  I need to update this specific line with the new values.

  C > later the user returns and removes the data of one of the fields completely so I need to remove that specific table line.

  D > the user does not directly from the table.  The table summarizes the entries that are made in the text and drop-down list fields.  I need to be able to maintain the table in harmony with user input.

  I agree with the addition of rows in a table, but I do not know what's best for that lines are kept synchronized.   I've got a good amount of Java programming experience under my belt, but I have a few projects in LiveCycle.

  I'm quite willng to read if you have any reference material online for the management of dynamic arrays.  So far, the only information I have found is how to add and remove lines, but not how to keep track of them.

  Any help is greatly appreciated.

  Ah sorry missed that you do not use two tables.

  Do you use Extensible lines or is there a specific line for each set of data?

  You can just hardcode where data are intended - a data go into RowA. To the same output of the field, you would be just: table.rowA.rawValue = this.rawValue;

  You can use Global binding on the fields: the fields, take data entry have the same name as the fields in the table and then automatically updated data.

  For blank lines, you will need to check if there is data in the fields and if no data you can hide the line: RowA.presence = 'hidden ';

• How to keep or ignore the UUID when you power on a virtual machine

  We have a scenario where we are mirror of VMs from one site to another site for BCP which has a separate instance of the VC.

  We pre-record the virtual computers hosted NFS in virtual center.

  When we need to recover break us the mirror and power on the machine.

  VC then promp with the question, you want to keep or throw the UUID.

  How can be script as its easy to answer a few virtual machines but a pain for possibly up to a hundred?

  There are a few things to keep in mind when you want to start the guests and answer the question in this way.

  (1) the Start-VM cmdlet will wait for the prompt to start, but there is a question waiting it will never happen.

  ==> the solution is to use the Start-VM cmdlet with the parameter -RunAsync , this way the cmdlet will not wait.

  (2) when a client starts, it will take some time before the issue appears.

  ==> the solution is to wait until the question is displayed with a loop

  (3) to get the current status of the prompt, the script needs to get the VirtualMachine object with each pass through the loop.

  The properties of the $vm variable are not automatically updated unless the script retrieves the object with the cmdlet Get-View.

  (4) the purpose of the Question is present when the question is displayed. Prior to this point, this object is $null.

  ==> to avoid execution of the StartsWith method on a $null object if statement first checks to see if the object in Question is present.

  The script relies on the fact that the two conditions that are combined with - and the operator are executed from left to right.

  This is probably not a good programming practice and should be solved by using two nested If statements.

  The following script implements all the points made above.

  Note that it can only be used for the issue of msg.uuid.moved.

  The script responses with choice 2 which is the choice of 'keep '.

  $qMsgUuidMoved = "msg.uuid.moved:"
  $choiceKeep = 2
  
  $vmImpl = Get-VM "TestPC"
  $vmImpl | Start-VM -RunAsync
  
  do{
    $vm = $vmImpl | Get-View
    if($vm.Runtime.Question -ne $null -and $vm.Runtime.Question.Text.StartsWith($qMsgUuidMoved)){
      $vm.AnswerVM($vm.Runtime.Question.Id, $choiceKeep)
    }
  } until ($vm.Runtime.PowerState -ne "poweredoff")
  
  Write-Host $vm.Name "started"
  

• How to keep separated from the other adjustment layers layers (PSE8)?

  I would like some tips on how to keep to a standard layer adjustment layers to adjust the background (lower) layer.

  Scenario:

  I created a solid background layer as a backdrop to the image of a small sculpture. The bottom layer is a layer of just the image of the sculpture. Above the layer of the image of the sculpture are a number of adjustment layers that are supposed to apply to the sculpture only layer. I would like to know how to store the adjustment layers above to adjust the background layer (lower).

  Thank you

  Highlight each adjustment layer in the palette layers (Ctrl + click)

  Press Ctrl + G

  The miniature icons should move slightly to the right with an arrow indicating the saturation for the sculpture below layer downwards.

• How to keep track of the last selectedItem in datagrid?

  Hi all

  I use Flex 4 and an AdvancedDataGrid.  I need to keep track of the previously selected item.  I can't think where this good capture.  In an itemClickHandler method, the value of the selectedItem of the grid is already the element currently selected.

  FocusIn and Focusout/focusouthandler() attributes apply to the entire data grid, not the single line in the datagrid control.

  Thank you.
  Bonnie

  If I understand what you're asking correctly:

  based on the story how 'clicks', you simply store the index selected in an arraycollection collection.

  If you only need one. use 2 variables. One to store the current index and the other to store the previous.  And 'click' call a function that moves the current index in the previous. and the new current index of slected.

  If your 'click' has already done something else, just make a wrapper function that incorpates the copy of the index of the clicked and then done everything what you need.

  something like that... If you insert data in the ADG it should show something other than-1

  ////////////////////////////////////////////////////////////////////////////////////////// ///////////////////

  <>

  xmlns:MX ="http://www.adobe.com/2006/mxml" layout = "absolute" > "

  Import mx.collections.ArrayCollection;

  [

  Bindable]

  private var history: collection ArrayCollection = new ArrayCollection();

  [

  Bindable]

  private var last: int;

  [

  Bindable]

  private var current: int;

  private function recordHistory():void {}

  last = current;

  current = adg1.selectedIndex;

  //***//

  history.addItem (adg1.selectedIndex);

  }

  ]]>

  ////////////////////////////////////////////////////////////////////////////////////////// /////////////////////////////////////////////

• How can I make the color replacement tool works correctly?

  I want to turn black to green in a chart B & w.  Here's the chart that I start by:

  

  Here are the directions I followed (EP 13):

  Replacement of color

  • Select the tool, color replacement (the tool replace color is part of the Brush Tool Options bar).
  • Menu, choose a brush in the options bar. Mode, as a general rule, you'll want to keep the blending mode set to color.
  • For limits, choose one of the following:

    Batch Replaces the color sampled, wherever it occurs under the pointer of.

  Contiguous Replaces colors that are contiguous with the color under the pointer.

• To tolerance, specify a small percentage to replace colors very similar to the pixel you click, or increase the percentage to replace a wider range of colors.
• To give a smooth edge areas that you correct, select anti-aliased.
• Choose the required sampling method. The available options are:

  Continues Continuous color samples, when you drag the color replacement tool.

  Once Samples of color only once, when you begin to drag the color replacement tool.

Background swatch Replaces the box containing the background color, whenever you drag the color on it replace tool.

• Choose a foreground color to use to replace the unwanted color.
• Click the color you want to replace in the image.
• Drag the image to replace the target color.

And here is the result I get:



I chose very carefully the darker more deep black as the color to be replaced and all blacks should have turned to green, but only gray pixels on the edges did it.  Oh, and here's a screenshot selected as I am, even though I have tried many different combinations:



Help? I am a novice, so I need descriptive and explicit suggestions.  Thank you!!

There are means other than the color tool replacement for what you want to do, which is to add color to a drawing in black or any other color.

-First of all, use the magic wand tool to select the color (here black). You should see the "mobile dash" around the shape. Do not forget to uncheck "continuous."

-Create a new layer while keeping the active selection (new layer in the layer Panel icon)

-Menu Edition/fill selection"." Choose your destination color.

The new layer now holds your shape with the color you have chosen.

• Cannot cut or make the transparent medium

  Hello

  I'm cutting in the middle of this chart 'P' to make it transparent. I found tutorials on the removal of the inner segments of objects using pathfinder, but whenever I try to use 'less before' or 'exclude', I get the error below ("images gradient meshes, graphs, the objects and text paths cannot be used as elements of the compound shape"). I am extremely frustrated and can't find any solution. Help, please!

  (I locate some information indicating the graph may be too small and should be expanded somewhat, but when I resized it, it gives the same error still.) I also tried to use "expand appearance", but it is grayed out.)

  

  It seems that you try to make part of an image transparent (P).

  This is usually done in Photoshop.

  But you can try this:

  Select the white object in the center of the P.

  Fill it with black.

  Select the white object and the image, and then click make mask in the transparency Panel.

  Deselect Crter.

• How to keep cases in the data dictionary

  Hello
  
  I am very new to Oracle, please apologize in advance for the silly questions.
  
  Using Oracle 9i R2, SQL Developer 1.51.5440.
  
  I don't know if it's Oracle DB or SQL developer tool, but the names of the object I create are all transformed into uppercase. Table name, column names, procedure names that all are displayed in uppercase. And yet, I make sure that when I created allows them to use carefully mixed case to improve readability. Example: ProductID, MyTable, etc..
  
  I went to the options of SQL Developer, but I saw no option to disable the automatic uppercase. Some objects rest in different cases, for example the content of a procedure still looks like when I typed it.
  
  Is there a way to get the names of the objects to display exactly like them, I created?
  
  Thanks in advance.

  Using double quotes around the string is the way to save the case of data retention. However, it is a nightmare to the query. As you must remember the case. Using functions as TOP invalid against the column index may compromise the performance of the queries. You can work around this by using function-based indexes.

  As said by the previous guy, unless there are compelling reasons, not many people saves data keeping. If you save the data as a "PRODUCT ID" using InitCap it will give product ID. much more readable than ProductID.

  Christopher Soza
  Oracle BI s/n
  Orix Consultancy Services Ltd
  b: http://sozaman.blogspot.com

• How to keep mail on the server

  Why is my iPhone 5 removing the server emails when I put it on 'NEVER' to remove the server?  We use Bell and our mail with outlook. I had this problem since updating to IOS 9.  I have my email account, email from my husband and emails from my son on my phone, and whenever I read an email and delete it deletes it on our home server, so that, I read it my family did not have the chance to read it. I have my husband e-mails value archive instead of delete, (which I am not sure what is the difference between keep the emails and checking them but that is another topic), but at least he can read them when he wants to.  I wrote a message on my phone the other day, and of course it marked on the server too.

  ANY help would be greatly appreciated!  TIA

  It depends on the type of e-mail account. for POP, if you have to leave emails on the server they should still be there. If the account IMAP or Exchange, once it is actually deleted on the device, is will be removed form all devices. Goes same for activities such as posting emails: for IMAP it will (or should) mark on all devices.

  In regards to deleting vs Archive, Archives place the message in a folder archive (where exactly depends on parameters and how you the provider maintains that), as opposed to completely remove.

• A question on how to install grid makes the VIP/SCAN responding to pings

  DB version: 10 gr 2, 11 1 material, 11 2 GR GR
  Operating system: Sun Solaris, AIX
  
  Before you start the Installation of the grid, the VIP or SCAN IP won't ping requests. We can nslookup on these.
  After installation of the rack, the VIP and the IPs SCAN becomes to pings. That made the installer grid? internally to make VIP/SCAN IP address to ping requests

  -What is the installer of the grid? internally to make VIP/SCAN IP address to ping requests

  Intellectual property should be attributed to a n/w interface and this n/w interface must be running for this IP address. Once this is true and seen there is no problem of permissions then 'ping ip' response from the n/w interface.

  Now world Oracle RAC, VIPs and SCAN IPs are virtual IPs and are managed by oracle clusterware. That's why Oracle checks the installation before any of these virtual IP addresses are not being used, then Oracle can assign (start) and management (start/stop/move) these IPs virtual by itself.

  Thus, when starting CRS clusterware began these virtual IPs under "public interface" for a RAC node. Then, once these virtual IPs are assigned to the n/w interface, then makes VIP/SCAN IP address to ping requests.

  Thank you
  Rohit Véronique CHASSAGNE
  http://www.rohitchandok.com

• How to keep metadata on the exported JPEG files?

  I be image editing in Lightroom for a while, but I don't have to pay attention to the issue of metadata so far. I need the metadata for geotagging my photos, but the problem I encounter is that after I have change in Lightroom and export to JPEG gets none of the info that comes in the RAW files exported with them (as the date and time of photos were taken, the settings of camera and lenses, etc.).

  These are the settings of the catalog that I use:

  

  When I try to synchronize my JPEG photos with all GPS-files they only detect the time and date the pictures where edited or updated the and not the date and real time photos were taken.

  Can someone tell me what I am doing wrong?

  Any help will be appreciated.

  Make sure that "Minimize embedded metadata" is disabled in the export dialog.

  

• When I delete an email on the local computer, how to keep it on the server?

  My wife and I use the same e-mail account on the server. When I look at an email on my computer and delete it, it also gets deleted on the server. Then, my wife is not able to see the email that I deleted. There used to be a parameter in Thunderbird that says do not delete messages on the server. I can't find this setting now. Is it still possible to do?

  If the leave on server option is not there, you are using an IMAP e-mail account. IMAP is server-based. Display you remote with your computer or phones. When you delete a message from any device he is gone.
  I suggest you research the differences between POP and IMAP email and decide what works best for you.

• How to keep from losing the image quality with environments found on the web. I drag the image in PS CC and it is all pixelated.

  I am PS CC for the first time. So what I'm trying to do, is to drag the different environments found on the web mainly 800 x 800 or near. When I drag the image in the page the image using Photoshop default PS is pixelated. How can I fix it. I run Windows 7 64 bit.

  Get a picture of higher resolution.