How to link articles within of each other (used to be buttons [navto:] and sheets)

I am moving to new DPSolutions and I'm confused as to how the navigation. How we use the buttons in the articles to navigate to other items within a collection.

You can use the same navto: / / If you specify the name of the article you used when you created the article in the web portal.

Tags: Experience Manager Mobile

Similar Questions

  • If 2 Airport extreme can stay connected to each other using their LAN ports?

    Hello friends,

    I would like to know if 2 Airport extreme or 1 Airport Extreme and Airport Express can stay connected to each other using LAN ports at the ends? I thought this is the LAN port 1 connected to the WAN port on the 2nd.

    Thank you

    To clarify the issue and the scenario, one of my friend described a typical scenario in which there are 2 AEs. AE1 has an ISP in its port WAN and AE2 has a different ISP in its WAN port. This 2 AE can mutually connected between them by using ports LAN AE1 and AE2 ethernet cable? He said this could be feasible if AE2 remained in bridged mode, without using the ISP attached to its WAN port. I just don't get how this is possible. Friends of the search help.

    Thank you

  • How to remove the support contact at screenshot using the "home" button

    guys, please help, how to remove the support contact at screenshot using the "home" button? I use 6 s ios 9.2, but when I take screenshot with the menu help key, the help key disappear on my photo, but the problem is, I want to take screenshot with my home button, please help... Thank you

    What turned the problem into a screen with the home button? Quickly, you press the power off button and home together and release - if the sounds are enabled - you should hear the camera shutter sound and have the capture in your app screen shots. The help key is not displayed

  • My 2 daughters have itouch, as well on my account even apple. How can I activate them text each other.

    My doughters each have an Itouch. They want the other text, but they are both the same account. How can I enable them to trxt each other.

    Every girl needs their own Apple ID to send and receive messages independently.  Apple intends that Apple ID (account) to an individual and not shared like you girl make.  Two people who share the same ID will cause all sorts of problems as you discover.

    However, family sharing allows people within the same family (up to 6 members or Apple ID) for share purchases such as applications, videos, and music. Separate IDs Apple will allow each girl to adapt their content to the individual, who will play an important role with the child earlier than later.  You can access most content another has purchased.    Implement the family share - Apple Support

    With current Apple ID shared as a member of a family separated, each girl and you can download their favorite of this shared ID content.  The idea is that each family member has their own tastes and can't do everything Captain ID contains.  Still with the family sharing, if family members want to share, everyone can access the other content.  Following this concept, when the child is ready to enter the world on their own and start their own family, they can take their music with them.  Let therefore the current shared Apple ID where over time.  Over time that it potentially becomes a monster, everyone has a hard time to get in their stuff.  Also there is no privacy in the shared ID of Apple.  It may be important for a growing family, which does not necessarily have a common knowledge of the interests of each other.

    For share purchases between members of the family:

    iTunes Store

    When logged into your own app and iTunes store Apple ID, app in iTunes Store on iDevice to iOS device you want to add content too, choose lower right of the screen > bought > family member to choose who bought item > select type of purchase > choose element > click cloud with down arrow to add feature, Member of the family of shopping.

    App Store

    When you are logged in your own App store and iTunes Apple ID, in App Store app on iDevice to iOS device you want to add an application, a member of the family bought (including the master Apple ID), choose updates from the lower right corner > bought high > choose member of the family who purchased the app, app to find in the list and click on Free or cloud with down arrow icon.

  • Wireless devices cannot connect to each other using the router EA6900

    I use the 2.4 Ghz network and none of my wireless devices are able to communicate with each other...  I could not connect to a wireless printer to my laptop wireless (through the router) and thought it was unusual.  I tried ping does not work either.  I then plugged a cable ethernet to the laptop and could ping the printer wireless without a problem.   I tried other devices (wired and wireless connections) and it seems that no wireless device can ping any other wireless device.  If, however, one of the devices is connected, it works fine...  All wireless devices to connect to the router and internet without problem... It's just when they try to communicate with each other.  I have experimented with the desktop using the ethernet adapter, then the wireless adapter... same results.  My wireless using my previous router devices could communicate with each other.  It's almost as if this device has insulated AP running if this so-called it doesn't support that.

    Customer service said: I'm the only one with this problem.  Does anyone else have this problem?

    I have an ea6900 and it works fine for me. Sounds almost like you are connected to the guest network which would be sort of this way. Did you do a power reset? It has never worked? Try to remove the power and back to see if it clears up it.

  • Several Articles in "folio", how to disable items flowing into each other?

    Good day to all, I'm rather new to DPS, so I hope someone can help...

    What I have in mind is to have a folio with several articles for iPad, but I want each article to stop at the last page, without being able to swipe to the next article in the folio.

    I created an article index with a button on each page of all articles back to this article.

    So all that I need help with is to figure out how to stop the scrolling/drag beyond the last page of each article and people have to click on the button to return to the index page...

    I'd appreciate any help, guys thank you in advance!

    You can create a dummy MSO with 2 States, covering full page. Place it as a slideshow to slide without crossfade and put your button in two States.

  • How to link downloads within the help system?

    I have

    Sometimes, I want to add documents to the system help, downloadable PDF, DOCs, Excel spreadsheets, etc.  In Flare I could simply add files and link to them.  I searched in the RoboHelp and can't seem to find the answer to this function?

    I can't add them even without going through the process of import and creation of subjects of documents.

    It sounds simple, but I could use a little help here please.

    Thank you.

    JC

    Hi JC.

    Baggage file automatically get grouped in the output so there is no need to do something with them. Regarding the link to the table of contents to a file of baggage, yes it is possible. Create a table of contents page and on the page 'Link To' at the bottom of the dialog box, select file of baggage. Then simply select the required file.

  • The toolbars in my FF piled - how can I put next to each other?

    I work with V25.0 FF.

    The bar with the symbol of the FF, the file/modify... current bar, and TAB of the web page are stacked.
    I would like to put them on a line - is it possible?
    I appreciate your comments.
    Best regards
    Henning

    That is supports be able to drag and drop a toolbar in the empty space to another toolbar, both the same level of occupation. This can save a lot of space, especially for small toolbars or those in which only a few icons should be visible. That would be a feature to emulate in Firefox.
    And for those of us who love the tabs directly above the page web, it would be nice to be able to use the space on the top level, next to the orange Firefox button, for example toolbar buttons.
    Or one of these possible is currently? I use FF 26.0
    Thank you

     -cj
    
  • How to replace one color with each other?

    Hello

    I use Photoshop Version: 2015.1.1 to change a single image.  (I use the color Mode indexed with a color table custom that I created with only 8 basic colors.)

    My bitmap has a black background and a border of a pixel wide red around its perimeter.  I want to erase that border (replacing the Red pixels with black).  I can do this with the Eraser tool, but I have to drag them all around.

    I was wondering if there is a faster way to do it.  If there is a tool that would allow me to click on the red border, they are automatically the Red pixels that form this border change to black, it would be great.  If someone can tell me that if such a tool exists, I would really appreciate it.

    I should mention that the inner part of my bitmap has red pixels I don't want to change, so I don't have to replace all the Red pixels across in your drawing.  I just replace the consecutive red pixels that form the border.

    Thanks in advance,
    Paul

    Set your foreground to black color. Select >, then edit > Stroke, 1 pixel inside, then uncheck the box.

  • How to upgrade column depend on each other in the same table

    Hello

    I have the following table with 2 colomns (A and B)


    A AND B

    100 null
    90 null
    80 null
    70 null
    60 null


    I want to spend the first 2 max number in column B to be like this

    A AND B

    80 100
    70 90
    60 null


    and help him please.
    with t as ( select 100 A, null B from dual union
                   select 90, null from dual union
                   select 80 ,null from dual union
                   select 70, null from dual union
                   select 60, null from dual)
          select A, B
          from t
          model
          dimension  by (row_number() over (order by A desc) num )
          measures (A, cast (null as number)  B, count(*) over ()  cnt )
          RULES (
                 B [for num from 1 to 2  increment 1] =  A[cv()],
                 A[for num from 1 to cnt[1] increment 1] =  A[cv() + 2]
                )          
    
    A     B
    80     100
    70     90
    60
    

    Published by: pollywog on June 15, 2011 15:44

    or if you have 11g there is now a function called nth_value

    /* Formatted on 6/15/2011 4:03:51 PM (QP5 v5.149.1003.31008) */
    WITH t AS (SELECT 100 A, NULL B FROM DUAL
               UNION
               SELECT 90, NULL FROM DUAL
               UNION
               SELECT 80, NULL FROM DUAL
               UNION
               SELECT 70, NULL FROM DUAL
               UNION
               SELECT 60, NULL FROM DUAL)
      SELECT LEAD (A, 2) OVER (ORDER BY A DESC) A,
             CASE
                WHEN A < NTH_VALUE (MAX (A), 2) OVER (ORDER BY A DESC) THEN NULL
                ELSE A
             END
                B
        FROM t
    GROUP BY A
    

    Published by: pollywog on June 15, 2011 16:04

  • How to send & receive a fax. I use vista Home premium SP1. and I found no option in all programs for the fax

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • Fax
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    FAX not available in Vista Home Basic or Home Premium. It is available in complete edition,
    Extreme and business.  Microsoft doesn't have a download of the feature to add to the Home Premium version.

    You might want to consider Snappy Fax at a low cost:
    http://www.snappysoftware.com/

    or the free version of BVRP:
    http://www.usr.com/BVRP/bvrp.asp

    or a full BVRP Classic Phone Tools 9: $29.90
    http://www.shop.Avanquest.com/USA/PR...S_CPT_homepage

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How to change the size of the image using HP ePrint app on and ipad or iphone

    I have a printer HP Photo Smart 7520. I have loaded down the HP ePrint app on my iPhone and iPad.  When you print a photo, how to change the six (4 X 6 or 5 X 7, for example) before printing on the iPad or the iPhone?

    Hi @thwhite1,

    Welcome to the Forums of HP's Support. I see that you want to know how to change the paper size in the HP ePrint app.

    I've included a screenshot of the HP ePrint app and where you will find the option to change the size of the paper.

    Please let me know how it goes.

  • Violation of timing when adding code blocks parallel to each other in a FPGA SCTL

    Hey guys!

    I have a problem with my code inside a SCTL of running on an FPGA VI and hoped someone could help me.

    I work with a 120 MS/s ADC and write the data to the FPGA block of memory in a 120 MHz SCTL. Since the data has to be 'mixed' there is also a code to get the correct address (by first example data at address 0, second to address 20, 40 and so on until 2000, then I start with 1, 21...).

    I have a second block of code that later, when writing is completed, reads in the block of memory to perform some calculations (a linear slope of the signal interpolation)

    The two parties are implemented using pipelining (I say this because I think it would be the first response of the community), while if I compile only one, everyone needs about 7 to 8 ns to run, which means that they meet the requirements to run in my 120 MHz SCTL (8.33 ns).

    But when two blocks of code are in the same field of clock (whether in ore SCTL in two SCTLs using the same clock) from the FPGA VI I get a timing violation, saying that the code in the SCTL needs 17 ns (logical and delay routing) to run. It is not also show me the critcal way, just the SCTL. Because the code runs at the same time, I don't see why the delay of logic should increase (to 12 ns). The only way 2 code blocks communicate with each other are the memory of block and some shift registers so the path of Combinatorics is not increased.

    I already checked whether the SubVIs (I use one per block of code to avoid the lack of clarity, but they are different) are the problem. If the code in the SubVIs implemented directly in the FPGA hand VI it does not change the delay of logic.

    50% of the registers and the lut FPGA are used, the DSP48s of 5% and 50% of RAM block, so I don't think that the problem is something like the compiler finds not enough free slices to create fast paths.

    The main problem is not that the delay of routing increases, but the delay of logic.

    Does anyone have an idea what could cause this huge increase by delay time?

    I use labview 2011 and 12.4 Xilinx.

    Try not to put memory read the node within a box structure. Instead, you can always read from a fixed address, say 0, when the data are not all ready. Reading a memory will not damage your data contrary to push from a FIFO. If your memory by reading the node is inside a case structure, there will be a mux when data is passed outside this business structure, which will increase the delay of logic.

    In addition, I also recommend that you do not use the loop of the index 'i', if you are running at high clock frequency. This counter is seen to be 32-bit, and you probably don't have a memory that deeply. LV FPGA is to have logic check inside the read node memory address range, so width incorrect address can still be important. You can implement instead of your counter code which the width of the tip is appropriate.

  • Print one check next to each other

    Hello


    I use database 10g and oracle apex 4.1. My requirement is to print records one next to the other, here is the code I use to print the records but its getting a printed below, please suggest me how to print records next to each other.

    / * Name of the employee and manager name * /.
    C1 in)
    SELECT
    FIRST_NAME. '' || LAST_NAME EMPLOYEE_NAME,
    MANAGER_NAME (MANAGER_ID) MANAGER_NAME
    FROM HR_EMPLOYEES WHERE ID =: P3_ID
    ) loop

    sys. HTP.p (')
    < div style = "text-align: center;" background-color: white, width: 180px; height: 30px; border: 1px solid #000 "> ' | C1. MANAGER_NAME | (/ div > ');

    end loop;
    Thank you
    Sudhir

    Sudhir_Meru wrote:
    Hello

    I use database 10g and oracle apex 4.1. My requirement is to print records one next to the other, here is the code I use to print the records but its getting a printed below, please suggest me how to print records next to each other.

    Employee Name and Manager Name
    
    
    for c1 in (
    SELECT
    FIRST_NAME || '' || LAST_NAME EMPLOYEE_NAME,
    MANAGER_NAME(MANAGER_ID) MANAGER_NAME
    FROM HR_EMPLOYEES WHERE ID = :P3_ID
    ) loop

    sys.htp.p('

    ' || c1.MANAGER_NAME || '
    ');

    end loop;

    Thanks
    Sudhir

    sys.htp.p('
    ' || c1.MANAGER_NAME || '
    '); //try giving a class to the div and control the look and feel using the css rather than specifying inline styles sys.htp.p('
    ' || c1.MANAGER_NAME || '
    '); //CSS
  • Identify the IDS that relate to each other?

    Hi all

    I would appreciate some advice with a special query that is run please. I use Oracle 10 g.

    I'm looking to identify children who relate to each other using their extended family relationships where they do not share a direct relationship.

    I have two tables:

    1 - my_children. This table has a view of the children interested.

    2 - all_relations. It has 3 main passes that identifies the relatives of people in my_children and other relatives (see code below). Rel_ID2 is the ID of who have somehow relate to rel_ID1 (child_id). Rel_type explains how they relate (e.g. mother/father/sister/many others).
    select * from
    my_children mc,
    all_relations ar
    where mc.child_id = ar.rel_id1(+)
    order by child_id
    My_children children can share a relationship between them directly (i.e. sibling) or indirectly i.e. child1 concerns child2 (cousin) mother's brother (or any number of steps) but! cannot be entered directly as cousin/cousin (Data Quality). What is important is that there should be a relative ID string to each other through rel_ID1 and rel_ID2.

    Using the table of all_relations, I need to identify what children in my_children relate to each other and assign them a value that identifies that they relate each other. This can be done by using a common rel_id or a general value, depending on what is more simple.

    I think that this could be done with something like
    Starts With Child_ID is not null CONNECT BY PRIOR rel_ID1 = rel_ID2
    but I don't understand queries line enough to make it work in this context. I can't use the PL/SQL I need to deploy in another application.

    Create tables below. desired1 is the endpoint that interests me. For example, ID A2000 connects indirectly to ID A5592 A4481 and A6000 but A2000 is not A5592 immediately.

    So thanks a lot if someone can recommend an approach to this.

    Create the table my_children
    (child_id varchar (5),)
    child_name varchar (20));

    insert into my_children (child_id, child_name) values ('A1000', "John Benson");
    insert into my_children (child_id, child_name) values ('à1453', "Alice Ronson");
    insert into my_children (child_id, child_name) values ('A1822', 'Sarah Jones');
    insert into my_children (child_id, child_name) values ('A2000","Mary Watson");
    insert into my_children (child_id, child_name) values ('A5592', 'Harry Smythe');


    create the table all_relations
    (rel_pk varchar (5),)
    rel_id1 varchar (5),
    rel_id2 varchar (5),
    rel_type varchar (20));

    insert into all_relations (rel_id1, rel_id2, rel_pk, rel_type) values ('R1349', 'A1000', 'A1459', 'Mother');
    insert into all_relations (rel_id1, rel_id2, rel_pk, rel_type) values ('R1546', 'A1000', 'À1453', 'Sister');
    insert into all_relations (rel_id1, rel_id2, rel_pk, rel_type) values ('R1941', 'À1453', '1973', 'Nièce');
    insert into all_relations (rel_id1, rel_id2, rel_pk, rel_type) values ('R1969', '1973', 'A3489', 'Sister');
    insert into all_relations (rel_id1, rel_id2, rel_pk, rel_type) values ('R2954', 'A1822', 'A1000', "Half-sister");
    insert into all_relations (rel_id1, rel_id2, rel_pk, rel_type) values ('R1301', 'A2000', 'A1359', 'Sister');
    insert into all_relations (rel_id1, rel_id2, rel_pk, rel_type) values ('R1366', 'A2000', 'A1359","Cousin");
    insert into all_relations (rel_id1, rel_id2, rel_pk, rel_type) values ('R1998', 'A1359', 'A2000', 'Sister');
    insert into all_relations (rel_id1, rel_id2, rel_pk, rel_type) values ('R3491', 'A2000', 'A4481', 'Brother');
    insert into all_relations (rel_id1, rel_id2, rel_pk, rel_type) values ('R3450', 'A4481","A6000","Half-brother");
    insert into all_relations (rel_id1, rel_id2, rel_pk, rel_type) values ('R7542', "A6000", "A5592', 'Half-twin');
    insert into all_relations (rel_id1, rel_id2, rel_pk, rel_type) values ('R3889', 'A4498', 'A2213","Other");


    create the table desired1
    (child_id varchar (5),)
    child_name varchar (20),
    famgrpflag varchar (5));

    insert into desired1 (child_id, child_name, famgrpflag) values ('A1000', 'John Benson","ZZZZ1");
    insert into desired1 (child_id, child_name, famgrpflag) values ('à1453', 'Alice Ronson', 'ZZZZ1');
    insert into desired1 (child_id, child_name, famgrpflag) values ('A1822","Sarah Jones","ZZZZ1");
    insert into desired1 (child_id, child_name, famgrpflag) values ('A2000","Mary Watson","ZZZZ2");
    insert into desired1 (child_id, child_name, famgrpflag) values ('A5592', 'Harry Smythe', 'ZZZZ2');

    Hello

    Here's a way to do what you asked:

    WITH     connect_by_results     AS
    (
         SELECT     rel_id1                    AS rel_id
         ,     CONNECT_BY_ROOT     rel_id2          AS root_rel_id
          FROM     all_relations
         CONNECT BY NOCYCLE     rel_id1     = PRIOR rel_id2
              OR           rel_id2     = PRIOR rel_id1
        UNION ALL
         SELECT     rel_id2                    AS rel_id
         ,     CONNECT_BY_ROOT     rel_id1          AS root_rel_id
          FROM     all_relations
         CONNECT BY NOCYCLE     rel_id1     = PRIOR rel_id2
              OR           rel_id2     = PRIOR rel_id1
    )
    ,     got_grp_id     AS
    (
         SELECT       rel_id
         ,       MIN (root_rel_id)     AS grp_id
         FROM       connect_by_results
         GROUP BY  rel_id
    )
    SELECT       c.*
    ,       g.grp_id
    FROM       got_grp_id     g
    JOIN       my_children     c  ON     c.child_id     = g.rel_id
    ORDER BY  g.grp_id
    ,            c.child_id
    ;
    

    Output:

    CHILD CHILD_NAME           GRP_I
    ----- -------------------- -----
    A1000 John Benson          A1000
    A1453 Alice Ronson         A1000
    A1822 Sarah Jones          A1000
    
    A2000 Mary Watson          A1359
    A5592 Harry Smythe         A1359
    

    The grp_id is the first child_id (in alphabetical order) that each line is connected, which must not be my_children.
    For the abstract grp_ids, use DENSE_RANK to map each grp_id to a single value. In other words, change the main query

    SELECT       c.*
    ,       LPAD ( DENSE_RANK () OVER (ORDER BY  g.grp_id)
                , 5
                , 'Z'
                )          AS famgrpflag
    FROM       ...
    

    Everything can stay the same as above. Output:

    CHILD CHILD_NAME           FAMGRPFLAG
    ----- -------------------- ----------
    A1000 John Benson          ZZZZ1
    A1453 Alice Ronson         ZZZZ1
    A1822 Sarah Jones          ZZZZ1
    
    A2000 Mary Watson          ZZZZ2
    A5592 Harry Smythe         ZZZZ2
    

    Thanks for posting the CREATE TABLE and INSERT. Instead of posting the results desired in a table, it would be more useful (and less confusing) If you posted at the exit.

    Little Penguin says:
    ... I think that this could be done with something like

    Starts With Child_ID is not null CONNECT BY PRIOR rel_ID1 = rel_ID2
    

    Exactly! But don't forget the reflexive nature of your data. It looks like what you call rel_id1 and rel_id2 are arbitrary, at least sometimes. For example, instead of:

    insert into all_relations (rel_pk, rel_id1,rel_id2, rel_type) values ('R1366', 'A2000', 'A1359', 'Cousin');
    

    as well, you could say:

    insert into all_relations (rel_pk, rel_id1,rel_id2, rel_type) values ('R9999', 'A1359', 'A2000', 'Cousin');
    

    you shouldn't do both. So whatever you do with rel_id1 and rel_id2, you also have to do with rel_id2 and rel_id1 (that is, with the inverse ID).

Maybe you are looking for