How to load programs from a CD which does not automatically load

I am new to windows 7. I want to load a program from a CD. It was easy with the Control Panel Add and deleate one program; or the execution of the order. Now, I don't know how to load a program from a CD which does not automatically load. Help!

How can I install software on a disk?

1. Insert the CD/DVD
2. If the CD is not automatic open start Windows Explorer - click on start, then click computer.
3. in the Windows Explorer window, open the drive that contains the installation files. For example, if they are on a CD or DVD open that drive or the letter of the disk drive.
4. in the disk that contains your files, look for either a configuration or installation of the file. Double-click on this file should launch the installation of the program, a game or utility. If you see more than one configuration or install files, try to locate the file for the Application, double-click each setting or install files until you find the file that starts the installation.

Questions about installing Windows 7?
FAQ - Frequently Asked Questions from Installation Windows 7 & responses

Tags: Windows

Similar Questions

  • How to remove taskbar from meebo? It does not appear in programs.

    How to remove taskbar from meebo? It does not appear in programs.

    original title: how to remove the taskbar of meebo

    Hello

    I suggest you to check if the program is listed under all the programs, some applications have an uninstall program of their own that allows you to uninstall the application. Click Start, select all the programs and find Meebo and click on it and then find the uninstaller. Click Uninstall.

    I also suggest you go through the steps and check.

    Meebo support

    https://www.Meebo.com/support/article/133/

  • How can I fix my macbook pro, which does not start?

    My macbook screen lights up, however, after loading 2 thirds of the bar, the apple logo becomes a circle with a cross inside. My software is el Capitan.

    Before this incident, I tried to save my photos on an external hard drive. Yesterday I tried to save the photos on an external hard drive using the finder, and I let him sleep through the night and to complete the process. My mom she used last night, and it started to freeze when I tried to change user, and he has not responded to my cursor (which I could move). That's why I force quit the Mac. At this point, I had also disconnected the hard drive (probably my fault). When I re-started the situation with the circle and a cross appeared and it has not changed since.

    I would be grateful if someone could help me solve this problem, even if it means send to apple.

    Thank you very much.

    Harry

    On the screens, you see when you start your Mac - Apple Support

    Hope you have a backup.

    Reinstall OS X from recovery

    https://support.Apple.com/en-us/HT204904

  • How do we install a fresh Thunderbird which does not keep the old settings

    I have thunderbird with a records mish mash, etc. I want to just copy my folders in OUTLOOK I did originally a few years ago. But I stopped using Thunderbird for a while and I went back to OUTLOOK. Now Thunderbird and Outlook folders are totally different.

    I uninstalled Thunderbird. Reinstalled. Whenever I have reinstall it picks up where it left off with the original settings. I want a soft empty thundirbird.

    How do I do that?

    Giovanni

    Delete your existing profile using the Profile Manager.

    https://support.Mozilla.org/en-us/KB/using-multiple-profiles

    If something you should keep to the old profile, make sure that you create a backup before you delete it.

  • How can I create a background gradient which does not affect the readability of the words in the foreground?

    Screenshot (27).png

    Note that the words seem to disappear as the blue becomes more important?

    How can I fix it?

    In addition, since I work more than 30 plans, is there a general framework that needs to be changed?

    Furthermore, this gradient was created using the gradient tool, and is therefore not part of the background.

    Under file-> Document Setup, I found that you can create a background Uni but see no options for a gradient fill.

    I would appreciate help.

    I'm like your gradient is above the text.

    Select your gradient and the hit Shift + Ctrl + [ ]

    This should send your gradient to the back behind the text

  • How can insert the upper Office icon, which does not appear in my Quick Launch bar? Where can I find this icon?

    Desktop icon. I can not find and isn't in my Quick Launch bar

    Here is the procedure: http://www.howtogeek.com/howto/windows-vista/quick-help-restore-show-desktop-icon-in-windows-vista/.  After the return if it doen't work.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How to make a video of the muse does NOT automatically.

    Hey guys,.

    I worked on my portfolio website and I just completed and transferred my show reel. For this video, I decided to integrate it within the muse herself, rather than upload on youtube. I created my html code just by watching a few tutorials, however, no matter what I do the video will play automatically as soon as lance Web site.

    This is the code I use:

    < iframe title = "my showreel |" 2016 | Show Reel"width ="853"height ="480"src ="http://mywebsite.businesscatalyst.com/assets/myvideo.mp4"frameborder ="0"allowfullscreen > < / iframe > "

    Is could someone please tell me what I need to add to it to make it simply play when the person presses play.

    Thank you

    Liam

    Hello

    Instead of Iframe I advise you to use the HTML5 video tag to add the video.

    Please see an example in the link below:

    How to integrate a mp4 video in my muse site.

    Kind regards

    Vivek

  • When you try to export data into a program that we use, it does not automatically recognize the file as .xml format. Anyone know what I can do to fix this?

    I tried to uninstall version 3.6 and reinstall. Also, I provided in the workstation image, but it still does not work. The OS is Windows 7 32 bit. This process runs automatically on a XP workstation. In fact, the machine that I've reconfigured was a XP box, but it did not work on this particular machine. Therefore, the reason for the new image.

    See:

  • How to recover programs from windows.old after reinstalling windows vista edition Home premium

    I had to reinstall windows - all of my previous programs seem to be in a folder called windows.old, but they won't work here.  How to restore these?  In particular, I would like to recover my old Windows Mail settings and files and also norton antivirus.

    Here is the procedure to retrieve the data from Windows.old: http://support.microsoft.com/kb/932912/.  You can't recover programs from windows.old - which is not possible.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • c: drive has 10% free space d: has 99% free, how to transfer programs from c to d?

    How to transfer programs from c to d?

    Hello

    Have you tried to clean the junk files that are normally found on your c: drive? To clear the temporary files click Start-> run, type & -> % temp %-> click ok. Delete all files in the temp folder.

    Also to recover space on the partrition, you need to run Disk Cleanup and compress old files. See also http://support.microsoft.com/kb/956324.

    To start disk cleanup, open my computer-> click drive c :->, right click Properties-> you get a tab for disk cleanup.

    If you do not plan to uninstall the service pack you can try to remove the $NtUninstall in the windows folder.

    Note that the folder is marked as hidden, so to see it, you must have configured Explorer to show hidden files/folders.

    You can also (for the record of $ $NtServicePackUninstall): If you want to keep these files to uninstall later goal you can make a backup of the folder to a CD for example and replace when uninstalling.

    You can also try disabling the system restore and disable hibernation (Hibernate mode writes an image of what you are currently working on a special folder on your hard disk and then shuts down your computer almost completely). To turn off Hibernation: click Start-> Control Panel-> Performance and Maintenance->, click Power Options.

    If you want to move the files to program from C to D, the best way is to uninstall and custom install applications on the D drive.

    I hope this helps.

  • How to remove programs from the system tray without removing them from the startup?

    How to remove programs from the system tray without removing them from the startup on Windows XP folder?

    Hello

    The first step is to identify the program that represents the icon and decide whether it should be in the system tray (most are not necessary). Hold the cursor of the mouse on the icon to see the name of the program that launches the icon.

    The best bet is to click the icon to see if this opens the box of the program options. If so, look for a selection similar to "remove from the system tray.

    Alternatively, you can hide the icons in the system tray.

    Here's how:

    1. right click on the taskbar and select "Properties".

    2. in the "Notification area" click "Hide inactive icons" if she already unchecked and then click on the button "Customize".

    3. click on the ' column next to each of your current behavior and choose one of the three behaviors for each program icon that appears in the system tray: "Hide when it is idle," "Always hide", or "always show".»

    If you hide an icon, but then see it again the next time that you log on to Windows, you may need to uninstall the program to permanently remove the icon. Uninstall the program permanently removes the program from your computer. For more information, see Uninstall or change a program.

  • I have a Mac Book Pro, which does not include a CD slot and I bought the Suite Adobe 6 CD. Download the program from the Web site using my serial number?

    I have a Mac Book Pro, which does not include a CD slot and I bought the Suite Adobe 6 CD. Download the program from the Web site using my serial number?

    Hi Haley,

    Please download Creative Suite 6 applications

    Kind regards

    Sheena

  • I currently have an ad - one that I use frequently on IE8 which does not work on IE9. How can I stop to get a message that I have new updates when IE9 is the only update?

    I currently have an ad - one that I use frequently on IE8 which does not work on IE9.  How can I stop to get a message that I have new updates when IE9 is the only update?

    Hi altak38,
     
    -What is the add-on which you speak?
    -Are you referring to Windows Update with Internet Explorer 9 update several times even if it has been installed?
     
    If so, follow the steps in the following article to resolve this problem.
     
     
    Post back with more information for the issuance of the add-on - to help you help.
  • I need to reinstall my adobe creative suite 6 on a new MAC, which does not CD. How can I do tho

    I need to install my suite creative adobe on a new MAC, which does not CD.

    Clues

    1. Is the serial number of your CS6 for Windows or Mac? If Windows, then you need to apply for a swap of platform get a Mac for CS6 serial number.
    2. If you already have a Mac CS6 serial number then download CS6 of
      http://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html
  • Imported from the SWF actionscript does not not in the _root movie...

    Hello.

    I'll tell you below what I want to accomplish, then I'll tell you what I did (which did not). I hope someone here can tell me where I was wrong and also how to fix and remove what I'm trying to do. Thank you!...

    WHAT I want TO DO:
    I want to have a Captivate SWF loaded in the bottom half of a main SWF Flash "shell", and then when the Captivate SWF is done playing, a text field on the "shell" SWF hand puts the word "DONE!" inside.

    WHAT I HAVE FACT (which does not work):
    I have a Flash SWF that loads a SWF from Captivate3 file into its bottom half (which works fine). Half upper main Flash animation has a field of dynamic text on this subject called "doneText_txt".

    I then did another SWF is just 10x10px and what is on it's ActionScript on the first frame that says:

    _root.doneText_txt. Text = "FINISHED!"

    Then, I went on the last slide/image in my Captivate project (in Captivate) and did a "Insert-> Animation" to insert this little SWF of 10 x 10 on the last slide.

    When I load that main "shell" and then the Captivate project load down and finished, nothing is displayed in the text box "doneText_txt".

    THINGS I noticed:
    When I import the SWF file in Captivate, it was transparent (has not appeared). I adjusted the transparency on this (in Captivate) to 0% and 100%, and it has not yet posted. I thought it might just be because it had nothing on it (just the default white background), so I went back in Flash and re-exported the SWF 10 x 10 fill with black. I have re-imported in Captivate, and yet it does not appear. Like, I thought you'd see a black square on the slide. He was on the timeline and I could move around the slide, but it was just a transparent box. This made me think that the reason that the text "DONE!" was not get past was because there was a problem with the same SWF file being on the slide in the first place.

    Any ideas? Or, if there is another way to remove what I try to do, it would be fine with me as well. Thank you!!!

    I FOUND A SOLUTION!

    Instead use:

    _root.doneText_txt. Text = "FINISHED!"

    I added a bunch more "_root" s in it like this:

    _root._root._root._root._root._root._root.doneText_txt. Text = "FINISHED!"

    And it worked!

    I guess that the SWFs you load into Captivate actually (backstage) loaded into Captivate swf themselves, so there are one bunch of other levels of _root that needs to be reached. To be sure, just to throw a bunch in there!

Maybe you are looking for

  • How to configure M40 - 184 to work with WIN98?

    pls help me with the drivers, or what ever to set up windows 98 with my labtop

  • found iphone 6s

    Hi, I found phone 6s on a street 4 days a go and waited for the owner to contact, but nobody did, and I tried to see if I can find any number to call, but as it was locked, I couldn't do anything. What should I do?

  • Trying to create the recovery USB disk

    I am trying to create a usb for my yoga 2 pro recovery disk. I found the instructions of lenovo support page, but when I search "recovery disk", nothing comes. Does anyone know why this might be?

  • Windows XP does not start

    Suddenly Windows XP does not start, instead, I get a message that says" Type the name of the shell for example, c:\windows\command.com. I am able to boot in safe mode but. Can anyone suggest what may be the cause of this and especially what should I

  • I just need to learn how to change the color/design of the login screen I have to cross when my computer starts.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone! When you install Windows Vista, I accidentally jumped on the color/design change to the login screen where I have to type my password to access