How to make a loop for

Well, I have a problem I do not know how to solve.

The idea is simple but I have no idea how to implement it on LabView. Here it goes:

I start with a picture of a [i]. For i from 1 to 5, I initialize all values to zero. I want to build one because I have 1 to 5 that loop for each iteration replaces the value of a [i] EI with i.

Maybe I'm missing something but I don't know how to do. I would appreciate it if you could give me some advice.

Kind regards

Can be done this way.  You don't know why you must initialize and then replace.  Much easier to create just using autoindexing.

Tags: NI Software

Similar Questions

  • How to create a loop for an audio book?

    How to make a loop audiobook?  I saw him, but I'm not...  Or how to find a multitasking screen removed?

    Hello Mebing08,

    Thank you for using communities Support from Apple!

    Your question, it looks like you are looking for a repeat function in iBooks while you listen to an audiobook. If this is correct, it has no function of repetition in iBooks. I suggest you; However, take a look at the following article for more information on the functions of iBooks provides while you listen to an audiobook.

    Listen to an audiobook - iPhone

    See you soon!

  • How to make a model for a quarter fold card

    How to make a model for a quarter fold card - horizontal and vertical format

    HI Mickey,

    Check the file > new file selector model to see if your version of Pages offers card models. This began as a two "single fold" card on US letter in landscape orientation.

    The model included three pages. Page 1 Page 2 inside, outside, and the third was a blank page. Only Page 1 was included in the original document.

    I started by the insertion of a page inside, containing two of the big text box below.

    Back to Page 1, I chose an image returned vertically then horizontally, then repeated this procedure with the text box that contains "Thank You".

    I traced the two objects, then moved inside page, placing the pair in the upper left corner.

    Inside page, I removed the text in the box on the left and replaced by "left inside,"a label to mark the position of this section in the final map. "

    I added a text box, entered 'Back' returned vertically then horizontally and dragged to the position shown.

    Save the result as a model.

    Using the same document, I went to file > layout and changed the landscape to Portrait orientation.

    Do drag the blue guides to the indicated positions, then reshape the elements to fit the new space.

    Save the result as a model (with a different name of the above registered version).

    Kind regards

    Barry

    PS: Executed using Pages ' 09.

  • How to make a database for an application

    How to make a database for an application. I can create it outside somewhere in my computer and then copy it into the current folder? or is there a standard way?

    Yes you can do it outside if you wish, two programs I've used SQLite Browser and sqlitestudio two do work but sqlitestudio has more features and is the one I now use exclusively.

    There are many others, however, simply search for sqlite application in google.

  • How to make a screenshot for a DVD on Windows Media Player

    Watching a DVD and I want to have a nod yet to a certain image. I heard that you can make a screenshot, but I don't know how that.does do everyone here knows how to make a screenshot for a DVD on Windows Media Player?

    Watching a DVD and I want to have a nod yet to a certain image. I heard that you can make a screenshot, but I don't know how that.does do everyone here knows how to make a screenshot for a DVD on Windows Media Player?

    ========================================
    I know that your question refers to Windows Media Player but
    the free VLC Media Player can easily capture screen
    shots of the video reading course and no cropping is
    Mandatory.

    You can set it to save the screenshot to the folder of
    your choice in the format of your choice and all what you
    is press SHIFT + S.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    VLC Media Player (32-bit Version)
    http://www.filehippo.com/download_vlc_32/
    (works on XP, Vista, 7, 8)
    (the name of the file to download is: vlc - 2.1.2 - win32.exe)

    After leaving by clicking on 'download latest Version '.
    button... WAIT... and the download dialog box opens.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    VLC Media Player (64-bit Version)
    http://www.filehippo.com/download_vlc_64/
    (works on XP, Vista, 7, 8)
    (the name of the file to download is: vlc - 2.1.2 - win64.exe)

    After leaving by clicking on 'download latest Version '.
    button... WAIT... and the download dialog box opens.

    Next... install the program...

    For the installer for your screen Capture... Open VLC and
    Reach... Tools / Preferences / video button / video
    Instant image section.

    In the directory field... Search for and select a folder
    to save your captures po (for example... you could
    Create a new folder on your desktop and select)

    TO... Prefix... check the box... Sequential numbering.

    TO... Format, choose JPEG or PNG.

    Finally... on the left, click on the Save"" button.

    Now... Play the video in VLC and pause by pressing
    the SPACEBAR when you see a screen that you want to
    capture.

    To capture the screen... type...  SHIFT + S

    Press space to advance to the next photo...
    ect... etc...

  • How to make an exception for warn me when a program tries to make changes to my computer?

    How to make an exception for warn me when a program tries to make changes to my computer?

    You are thinking of the UAC mechanism? If so, then the answer is "you can't." Allowing exceptions opens a backdoor average size of your barn door who would immediately be exploited by hackers.

  • How to make a box for error off my screen. Wrong e-mail address does not pass & I always get error days later

    How to make a box for error off my screen.  Wrong e-mail address does not pass & I always get error days later

    Hello

    Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

    The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would be grateful if you could help me with more information.

    • You use the Windows 8 Mail or any other email client?
    • When was the last time it was working fine?

    If you encounter problems with Windows Mail app, try the following steps.

    Step 1:

    Please go to the link below, download the file and run it.

    Run applications troubleshooting

    Download and run the troubleshooter modern UI App.

    http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

    Step 2:

    I suggest to go through the link and follow the given procedure. Here is the link for your reference.
    Solving problems with a soft

    Hope this information was useful.

  • How to make an update for camera RAW ARW (sony)?

    How to make an update for camera RAW ARW (sony)?

    General answer in this faq:

    FAQ: Photoshop Elements will work with my camera, or why does not open my raw files?

    For more information, please indicate the camera model and your version of elements.

  • How to make it possible for clients to upload files to my Web site?

    How to make it possible for clients to upload files to my Web site?

    Thank you for posting.

    Muse is a design software. It does not provide you server for hosting your site. However, BusinessCatalyst not. So if you publish your site on BusinessCatalyst, you can allow upload of a file interface via Web Forms or Web applications. Please refer to the following article on how you can achieve in British Colombia through webapps: http://kb.worldsecuresystems.com/kb/add-custom-content-using-web.html

    See you soon,.

    Scott Raj Rouanet

  • I have created a slideshow in Prem Pro and need to make it loop for a show, how can I do this in Prem Pro?

    I need to have a continuous loop for the quicktime file. Any ideas?

    How to take a corporate video and pass it to play all day at a trade show?

    https://forums.Adobe.com/thread/1840033?SR=stream

  • How can I autoindex looping for to create several channels daqmx

    I'm trying to autoindex create a loop FOR containing the DAQmx vi to create AI multi-channel voltage with identical settings, except that I need to apply specific channel names using a constant and specific physical channels using a constant of channel. Wiring of a constant DAQmx of physical channel does not work because the data type is incorrect. Similarly, I don't understand how to use a string constant to autoindex through the channel names is or how to configure the constant string (s) to assign names. Also, when I try to make one of these, I get a tunnel to exit the DAQmx autoindex create channel, rather than a task out. I can achieve my goal using several explicit DAQmx create calls to channel, but for high channel count, it is very time consuming.

    I use LV 8.5.

    I'm hoping to find the code showing how to perform the conversion type, flattening, or what to do.

    Diane has.

    I have an array of clusters.  Each element of this array is a cluster.  The cluster consists of a (scalar) string and input/output (also scalar).

    In addition, my TI attachment extracted.  I think that your file has been LV2009.  If so, you can drag the image from the browser and drop it onto a diagram.

  • How to make a loop audio Clip?

    PrE7.

    How to make an audio clip loop a given time period?

    Let me know if you need, more or less long. I always your original, so the version published on the system. Do not delete for a few days. We can also adapt a modified version to get an exact duration, by basically Time stretch the Clip. I'm doing this at the hearing, so I can maintain the field and other aspects of the case. Pre can do, to a certain extent, but I like the control of the hearing. In addition, we can Volume keyframe fade sooner than the last Audio Unit, if they had to.

    Good luck

    Hunt

    PS - If you use SFX, I often more material, I'm going to need. Rather than change in Audition, I just put all the Clip of SFX on a track and keyframe and the Keyframe to just the place that I need. In this way, if, let's say I lengthen my video Clip later, I just need to set keyframes for SFX and I still have enough material to use - I have no re - edit in Audition.

  • How to make a loop with variable values depending on where you are in the loop

    Hello

    I need loops / nested loops that choose different figures depending on where you are in the loop.

    The entire function must operate at times 'ml '. 'ml' is a dynamic figure.

    Loop 1 = while the loop is the first 12 iterations, "exconemp" must be equal to 100. 13-24 iterations, 'exconemp' to 102.5 equal, for 25-36 TI 105.06, 37-48, it will be 107.69. This must change each 12th iteration until he reached 'ml '. The calculation takes the value of the previous 'exconemp' and then that multiply by 0.025.

    Loop 2 = while the loop is in 120 first iterations, 'abc' should be equal to 0.015 and additional iterations should use 0.01. It should also work in a way to know if 'ml' is greater or less than 120 and work accordingly.

    My main problem is - this - how can I get loops to go like this:

    While the iteration is < 12, to do this, THEN take the final figure (12th iteration) and begin the 13-24, make this SO etc etc.

    How to produce a THEN statement? I can get the code to pick up the final values, but does not change along the way.

    I think I might better create an array for loop 1, but I'm not entirely convinced of that. Also, I think it would be better/more net if I can get "month total 1 ' and ' month 2 total ' in loops, but do not know how to do this.

    The values I need to produce (only 36 first shown):

    1-12 = 125.55, 251,65, 378.31, 505.52, 633.29, 761.63, 890.53, 1019.99, 1150.03, 1280.63, 1411.81, 1543.57
    13-24 = 1679.05, 1815.12, 1951.79, 2089.06, 2226.93, 2365.41, 2504.50, 2644.20, 2784.52, 2925.45, 3067.00, 3209.18
    25-36 = 3355.19, 3501.85, 3649.15, 3797.11, 3945.71, 4094.96, 4244.87, 4395.44, 4546.68, 4698.57, 4851.14, 5004.38

    var ml = 240 / / dynamic figure, multiple of 12 up to 780
    var exconemp;
    var exconem = 100;
    var inf = 0.025;
    Tree var;
    var tec;
    power of the var;
    var fvis;
    var abc;
    var fvee;
    MVT var;
    function myfunction() {}

    Loop 1

    While (ml < = 12) {}
    exconemp = exconem;
    // }
    so that {(ml > 12)
    exconemp = exconem * inf;
    //}

    end loop 1

    trace ("exconemp =", exconemp); employee contribution

    tree = exconemp /(1-0.2)-exconemp;
    TEC = exconemp + tree;
    trace ('tree', tree);
    trace ("tec", tec);
    power = Math.pow (1 + 0.07, 1/12);

    Loop 2

    While (ml < = 120) {}
    ABC = 0.015;
    //}
    then {}
    ABC = 0.01;
    //}

    end loop 2

    fvis = power *(1-abc/12);
    trace ("fvis =", fvis);
    FVEE = tec * fvis;
    trace ("fvee =", fvee); month 1 total
    MVT = (CET + fvee) * fvis;
    trace ("MVT =", MVT); month 2 total
    //

    for (var i: Number = 0; i < ml; i ++)
    {
    MVT = (CET + MVT) * fvis;
    trace ("tfvloop =", MVT);
    }
    }

    I hope that I've explained this well enough.

    Thanks in advance.

    I think that will do it even if I don't quite get the numbers you posted.

    Stop();

    var ml = 48; figure dynamic, multiple of 12 up to 780
    var exconemp;
    var exconem = 100;
    var inf = 0.025;
    Tree var;
    var tec;
    power of the var;
    var fvis;
    var abc = 0.15;
    var fvee;
    MVT var;

    MyFunction();

    function myfunction()
    {
    exconemp = exconem;

    for (var index: uint = 1; index)<= ml;="">
    {
    trace(index + "--------------------------------");
               
    tree = exconemp /(1-0.2)-exconemp;
    TEC = exconemp + tree;
    power = Math.pow (1 + 0.07, 1/12);
    fvis = power *(1-abc/12);
    FVEE = tec * fvis;
                       
    if(index == 1)
    {
    trace ("month 1 total =", fvee);
    }
    another if (index == 2)
    {
    MVT = (CET + fvee) * fvis;
    trace ("month 2 total =", MVT); month 2 total
    }
    on the other
    {
    MVT = (CET + MVT) * fvis; now that we're here the MVT auto perpetuates on himself
    trace ("months" + index + "total =", MVT); month total n
    }
                       
               
    If (index %12 == 0)
    {
    exconemp = exconemp *(1+inf);
    trace ("changed to exconemp to:" + exconemp);
    }
               
    If (index % 120 == 0)
    {
    ABC =. 01;
    trace ("changed abc to:" + abc);
    }
               
    }
    }

  • How to make a loop performance during a given period of time?

    Hello!

    I'm new to labview and have found how to do a loop running for 2 seconds for example, and then to get out.

    Hi Hookso,

    You can do this by using different loops like while loop and loop for Roderic has already indicated how using a loop for I illustrated in the attached vi how using a while loop and function of elapsed time. Take a peek inside.

    Kind regards

    Amine31

    (Give congratulations to good answers and Mark as a Solution If your problem is resolved)

  • How to stop a loop "for".

    Hello

    Do you know how I can stop a loop for? because when I click on the stop switch on my front, the VI didn't stop and continue to perform the loop.

    If you have a newer version of LabVIEW, you can right click on your loop For and show the terminal stop.  This will allow you to stop the execution of the loop For the earlier that you would otherwise based on the N or the number of items in an array of automatic indexation.

Maybe you are looking for