How to make a partition on the c: drive?

Double post

I can't do more than 1400 MB of drive c: patition. my computer has a 250 GB hard drive. then suggst me a way to make patition at least 10 GB

I want to partition my local disk C:. Please how to do it. I can't do it through disk management. I gave the picture of my disk management, see and find the problem.

but I can't do more than 1400 MB patition. my computer has a 250 GB hard drive. then suggst me a way to make patition at least 10 GB

then use this tool... very friendly, drag and zoom feature is available...

http://www.partition-tool.com/personal.htm

Unlike the windows Disk Manager, it's a very flexible thing

Tags: Windows

Similar Questions

  • How to make Vista partition on the HARD drive as first with recovery CD

    Hello

    I want to format and retrieve information from my 'Vista' (C: / /) partition, which is the first. But when I choose the option "Format and recover to a first partition on your hard disk (without RE) ' the computer began to recover in" Type of Partition: windows NT NTFS (ID: 07) "whose size is only 1.50 GB.

    In the middle of the process, it shows not 'enough space on a disk.

    Question: How to make a 'vista' first partition? What is 'the first partition' in the second formatting option and recover the system?
    Thank you for your answers

    Hello

    Sorry, but you will not be able to do. I know it's a bad situation but if you use the first option that the whole HARD disk will be formatted and C new partition created. Second option, that you can not use at all. I tested it with my Satellite A100.

    I called Toshiba and they said that Toshiba work on new recovery options and new notebooks will have the best recovery option. Something like old installation expert ghost mode.

    I know it's wrong, but unfortunately there is nothing to do.

  • How to make a partition during the installation of ESXi 5.0

    Dear Sir.

    I want to install ESXi 5.0 on my HP compaq 6200MT machine, I have 2 500 GB HARD drives. Problem is I don't know how to create the partition and in what phase of the installation.

    When I run Setup it does not give me any part where I should partition.

    Moreover, I want to install ESXi 5.0 in the format below.

    / 5120 MB ext3

    1600 MB swap

    / Home ext3 2048 MB

    ext3/tmp 2048 MB

    ext3/var 4096 MB

    / opt ext3 2048 MB

    / boot ext3 250 MB

    vmkcore 100MB

    Your help in this regard will be highly appreciated.

    Thank you

    Malik Adeel Imtiaz

    The ESXi uses about 5 GB of disk space for internal use, the rest could be used for your virtual machines. Running a Microsoft Cluster virtual has many different conditions, but it might be possible to install in your situation (assuming of course that it is a test configuration). See this document for more information on the configuration of the "cluster-in-a-box", page 10:

    http://pubs.VMware.com/vSphere-50/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-50-MSCS-Guide.PDF

  • Satellite M115-S3094: how to make a partition without reformatting the HARD drive?

    Hello

    recently bought a laptop Toshiba M115 comes with 80 GB ' SATA drive and XP MEDIA CENTER 2002

    (1) how do I partition without reformatting the drive.

    (2) even if the laptop came with a pre-installed xp. I was wondering what happens if I want to reinstall xp media center, if and when required. Y at - it a disc that I can order (I have the license)... What options of backup kindo f are at - it?

    first time with toshiba... so am new at the mercy of the workings...

    DMM

    Hello

    1.), I use the Partitions Magic 8 to create partitions on the HARD drive.
    This application is very nice and I love it all simply ;)
    You can change the size of the partitions, status and you can fully manage the partitions on the HARD disk. And the best thing is you do not need to format anything B-)

    2.) well, the computer Toshiba laptop are delivered also with the recovery CD. I think that all manufacturers of laptops offers this CD of restoration with own products.
    In any case, on this CD, you'll find Tosh preinstalled operating system drivers.
    If you want to install other OS (XP MCE) you can do it, but you should check if there are drivers that are needed for this OS. But I have XP drivers should also work with thin MCE.

  • HP Pavilion 15-ab231na: how to make a Partition in windows 10

    How do I partition my hard drive, I need 2 separate Partitions

    How can I do it by myself

    Follow this procedure:

    1. search computer management in the search box on the taskbar.

    2 - now, look in the menu on the left and deposited, there is disk management. Just click on disk management. Wait a few seconds for loading the disc information.

    Now, right-click on the required disk you want to partition. For example, if you want to make a partition on the Local C drive, then right-click on it. Now click on Decrease of Volume.

    3 - now, a message will be displayed are saying mark space. After that, in the next screen, you will get 3 Details.

    In the first field, total size before shrink is written. (This is the current size of the Local disk)

    In the 2nd field, the size of reduction in MB available space is written. It is the maximum size of the hard disk, you can create hard disk.

    Now, the 3rd and the most important area is your field of decision, to put the size of the desired disc, in fact, given the maximum limit in the second field.

    Note: These details are in MB. To get an idea in the UK, just divide it by 1000.

    4 - now, when you have an idea about the size of the hard disk that you want to create, click button under film . Wait a few minutes. Please abstain you from any activity in the middle of this operation.

    5 - now, the size that you specified in step 4 just creates the space unallocated on your PC. You must create a hard drive out of it and name it also.
    Now, once the unallocated space appears as shown above, just make a right click on it and click on new simple volume. And will open a new Wizard of sample Volume.

    6 - now, in the next screen, simply specify the size of the hard drive. Click Next.

    7 - on the next screen, choose the drive letter you want to name. You can choose any letter.

    8 - file system choose from the next screen. NTFS is recommended, but you can also select FAT32 if you wish. In addition, change the new Volume and name it as you wish.

    9 - on the next screen click on Finally, the finish for the finishing process.

    Once you click on finish, it will take a few minutes to complete the process.

    It is the best way to perform a Windows10Partition.

    I hope that it helps.

    Source: https://techyuga.com/easiest-way-to-perform-a-windows-10-partition/

  • How to make a folder shows the number of files in there?

    How to make a folder shows the number of files in there?

    You have not indicated what OS you are using.

    Yosemite

    Action > View Options: Select to display the item of information

  • Tecra A8-104: how to create a second partition on the HARD drive

    Hello.

    I had to use the recovery disk, and I deleted by mistake my (two) initials of the partitions on the HARD drive. : ((now, I have only one.

    Can someone tell me how I can fix this?
    I want 2 partitions, not one. x 10

    The Toshiba Recovery CD could create two partitions.
    The installer will ask where or how install the OS on the HARD drive.

    For example, the HARD disk supports 100GB. So you can choose the first 60 GB for installing the OS and the difference (40 GB) could be activated after the installation of the OS.

    This can be done in the management of the computer-> disk management.

  • I'm trying to connect on Apple TV.  It keeps generating a 6-digit verification code, sent to another device.  I need a 4 digit or need to know how to make a space on the verification code entry screen

    I'm trying to connect on Apple TV.  It keeps generating a 6-digit verification code, sent to another device.  I need a 4 digit or need to know how to make a space on the verification code entry screen

    Read this noting the last two paragraphs:

    For Apple ID - Apple Support two-factor authentication

    You can try to add on your suggested such password or disable the service and then connect.

  • Equium L350 - 11 d - how do I delete the second partition on the HARD drive

    How can I delete the second partition that came with the laptop, so I can use the full capacity of computers HARD drive?

    I feel that this partition is their because I have not created a DVD of recovery he would remove the partition once I created the recovery DVDs.

    The score contains a folder of HARD disk RECOVERY and in the folder says do not delete or change this folder or files.

    I have a Toshiba Equium L350 - 11 d

    As you have already said that the second partition contains the HDD Recovery folder if you would remove this partition you will not be able to create the recovery DVD and would not be able to recover the laptop HARD drive.

    Therefore, you must create the DVD before recovery would remove anything from the second partition on the HARD drive.

    After you create the DVD recovery successfully, you could remove the partition and could add the free space on the HARD disk on the first partition.
    This can be done on disk management!

    This is a useful page for Microsoft:
    [Using Windows and procedures: Vista HARD disk partition | http://windowshelp.microsoft.com/windows/en-us/help/d9a4d35e-efdf-406c-a049-0860180129a71033.mspx]

    Good bye

  • How to make an arch on the topic title?

    How to make an arch on the topic title?

    You can do the following entirely in any version of Pages because the text on a path is not supported. The News Gothic 'gate' in one area of text Pages. The arc of text was done in HTML5 Canvas with Javascript, then saved as a .png image, which was dragged/dropped into Pages v5.6.1. Normal means to create text curvilinear (CRA) is done by an application chart non-Apple.

  • How to make a lock off the internet so I can have another WiFi computer using the internet

    How to make a lock off the internet so I can have another WiFi computer using the internet

    you do not take the lock itself.

    Instead, you configure another computer with security information to access the connection Wireless secure.

    Unfortunately, we cannot help you with this, because we cannot tell if you are the owner of the wireless connection or someone trying to hack it via another computer.

    However, what you can try is to contact technical support that provides your internet service.  they will be well to validate your identity and then provide help or more detailed instructions.

  • the friends hyii UA HUD need help how to make a backup of the files from his deleted with (shift + delete) memory card

    the friends hyii UA HUD need help how to make a backup of the files from his deleted with (shift + delete) memory card

    Hello

    It seems that you want to restore the files removed from the memory card.

    I will definitely help you with this.

    I would say you can search the Internet for data recovery software by using your favorite search engine.

    Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

    Thank you.

  • How to make a backup of the system files?

    I want to just back up the filesystem in the case where.

    Hello

    You can save your own personal files (documents, photos, etc.) or do a complete PC backup that contains the system files.

    If you want to make a complete PC Backup or a backup file only, buy an external hard drive.

    Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.

    All editions of Vista can do backups of files.

    Here's how to back up and restore your files:

    "How to back up your data.

    http://www.wintuts.com/how-to-backup-your-data

    http://www.home-PC-help.com/windowsvistabackup.html

    "How to restore your files.

    http://www.wintuts.com/how-to-restore-files

    This is how to do a full backup of the computer and how to restore it (for Vista Business, Ultimate and Enterprise only):

    «How to make a backup of the computer in Vista»

    http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

    "How to restore a full backup of the computer.

    http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

    FAQ from Microsoft about backup and restore:

    "Back up and restore: frequently asked questions.

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    There are a number of 3rd party programs available for a full backup of the computer; others, you must pay for, some are free.

    This program must be purchased:

    "Acronis True Image".

    http://www.Acronis.com/homecomputing/products/TrueImage/index_gwo.html?utm_expid=4274314-6

    These are free programs for the protection of the computer:

    "EaseUS Todo Backup free"

    http://www.TODO-backup.com/products/home/free-backup-software.htm

    "Download Backup & Recovery 2012 free FREE!

    http://www.Paragon-Software.com/home/BR-free/download.html

    «Macrium Reflect FREE Edition»

    http://www.Macrium.com/reflectfree.aspx

    ___________________________________________________

    And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery discs that are system files in order to reinstall the operating system.

    Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

    If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

    See you soon.

  • How to make a backup of the Windows BACKUP DELL?

    I have a Dell 0ptiplex 3010 with windows 7 pro 32 bit 10 units.
    How to make a backup of the Windows BACKUP DELL?
    Please help, I'm still confused with BACKUP DELL.

    Hi rahar_satriyo,

    Only the version complete Dell backup and restore will give you an option to backup computer image which is a paid version. The default Basic that comes with the system version will have only the restore factory in image.

  • How to make a CC off the power of a laptop so I can put it on a second desktop computer

    How to make a CC off the power of a laptop so I can put it on a second desktop computer

    You can simply disconnect from the Adobe Creative cloud to disable subscription:

    https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

    No need to uninstall to disable CC apps on a particular computer, but if you want you can uninstall it.

Maybe you are looking for

  • Satellite P300 - 18 m - recovery disc won't start

    Hello I have for the recovery disk, but it does not start, so I can't yet to erase my hard drive.So far I have tried:-Start, then press f8-Start, then press c-start and press 0 I've already changed my boot order, but my laptop still does not boot CD.

  • Deskjet 6540 print missing some colors

    Color cartridges not empty but some colors do not print.

  • Connection problems to the user of Unifi in KL, Malaysia

    I live in KL, me sia. I just installed Unifi at home and have difficult trying to connect to my company's VPN secure platform. What can I do? Are there settings that I need to do for my laptop? I have no problem access to my email from company or oth

  • Delivery to the recipient has failed

    This is the only message that I get no error codes nothing, but I don't know why it has failed-i havew been emailing this addy more than 2 years

  • Reference Dell WinPE 5.0 driver CAB

    I have SCCM SP1 R2 and the Dell customer integration Pack 3.1 2012.  When I try to import the ACR 5 of WinPE from the SCCM console, it fails with 'the selected driver package is incompatible. Does anyone else have this problem?  My understanding is t