How to make a simulation of sensors of 12-bit resolution

Does anyone know how to do this?  Am I missing something in Labview, I understand the 12 bits of resolution of a sensor part either... so this will help you.

Thank you

Chris

Northwood wrote:

Does anyone know how to do this?

Yes. You simply generate a random integer in the range from 0 to 4095 (2 ^ 12 - 1).

I don't understand the 12 bits of resolution of a sensor part either... so this will help you.

It's the width "slices" that you have to represent a floating point value as an integer. gives 12-bit you 4096 slices, so for a signal to large scale of 5V, each 'slice' corresponds to about 1.2mV. Thus, you would be unable to represent, for example 0.5 mV, as it would be returned as just 0, since the available 0V next step is 1.2mV.

I suggest you spend some time in the section of the tutorial OR data acquisition: http://zone.ni.com/devzone/cda/tut/p/id/4523. What you probably want is analog Fundamentals-> Analog sampling frames.

Tags: NI Software

Similar Questions

  • How to make a menu fit for salvation policies monitors resolution is larger and readable?

    How to make a menu fit for salvation policies monitors resolution is larger and readable?

    My UI elements appear tiny. | Error postal codes of Mylenium

    Mylenium

  • Photoshop elements 13 is incredibly tiny on my laptop it makes this useless application, I have a laptop 13 inch.  can you tell me how to make the largest application without changing my screen resolution?

    Photoshop elements 13 is incredibly tiny on my laptop it makes this useless application, I have a laptop 13 inch.  can you tell me how to enlarge the photoshop application without changing my screen resolution?

    Well good for Photoshop to fix this, I chatted with technical support and they have a new version of 13.1 to. I've updated, then went in the preferences and found the preference of the user interface, select 200%. Who did the trick.

  • How to make my Web page 100% width on any resolution of the Office?

    Hello

    I designed a model of Web site on Photoshop with dimensions of 1280 x H: 2464 W:, but when you put the JPG file on the blank home page

    to see how it would look and fit, he was not fill the entire screen and was rather Center and white left and right there.

    I am posting on my desktop which is 1920 x 1080.

    I'm new to Muse, so I'm not sure what is the best size settings to choose for a Web site that would work perfectly on almost any office.

    An example of the style of the site, I want to create is the site Web of Nestea

    For the header and the footer of my site, I have a huge image instead of a solid color.

    I know that images must be really big so that they are not stretched and quality in bulk, but

    If someone could tell me the dimensions and parameters to be set when creating a new website so that

    I was able to re-layout of the site with the same dimensions and that I placed the JPG file to see how it

    would look, he would fit edge to edge and not bad quality.

    Thank you

    Hello

    You can find below for useful resources to help you get started with a site of flexible width in Muse similar to the example you provided get.

    http://TV.Adobe.com/watch/Muse-feature-tour/Muse-design-for-flexible-browser-width

    https://helpx.Adobe.com/Muse/how-to/add-100-width-slideshow.html

    http://helpx.Adobe.com/Muse/using/using-fill-browser-fill-options.html

    http://TV.Adobe.com/watch/learn-Adobe-Muse-CC/adding-scroll-effects/

    http://helpx.Adobe.com/Muse/using/scroll-effects-opacity-slideshow-animate.html

    See you soon,.

    Vikas

  • How to get a windows Vista Home Premium 32-bit installation disc?

    My computer is an emachine T5086.  It has Windows Vista Home Premium and when loading drivers they stop loading at "windows32 drivers/crcdisk sys. I don't know what that means.

    Then, the computer restarts and asks me to install my windows installation disc for repairs.  F8 on reboot is not available as an option.  I don't have a repair option I turn on the computer and hold down the F8 key manually.  I don't have a windows disk or recovery disk and I can't to where I can find a restore either point.

    How to make a windows Vista Home Premium 32-bit installation disk?  I have my product key. Or where can I get one?

    Hello

    There are different methods to reinstall Vista.

    There is no Windows Vista downloads available from Microsoft.

    You can contact the manufacturer of your computer, eMachines and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    http://www.eMachines.com/EC/en/us/content/home

    To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

    The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

    Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

    Ask them to the proper key sequence.

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • How to make a macro with a goal photos 50 mm f1.8 Prime

    How to make a photos of macro with a prime lens 50 mm f1.8 lens is labeled macro, but only makes farm ups.

    A "true" macro lens allows to approach quite close to your subject that the size of the image on your sensor is larger than what is in real life.

    For example: your sensor is "roughly" 14 x 21 mm.  A penny in the United States has a diameter of 19mm.  This means with a real purpose of macro scale '1:1 ', you could get close enough to the penny the edges of upper and lower of the penny does not fit in the frame (the will of sides... barely.)

    There are a number of ways of "close-up" photography.

    (1) buy a "real" macro lens  The EF-S 60mm f/2.8 Macro USM lens is fantastic and also good enough prices.  A 'real' macro lens will provide the highest quality of image.

    (2) buy "extension tubes".  These committed between the casing and the lens, but they are hollow (there is no element of glass in them but they have electronic contacts so that the lens and the body can still communicate.)  By moving the furthest lens to the focal plane, the range of the lens is considerably reduced.  This allows you to get much closer that otherwise would be possibe.

    (3) use diopters "close up".  Here's the screw on filters that you screw on the end of your lens.  They provide a larger/more close to your subject.  The disadvantage of these, it is that they can show distortion near the edges of the image.

    (4) use a ring of "Recoil".  It is a ring that allows you to mount your lens on the camera body... back.  The screws on the front of the lens (where you would normally be screw on filters), but a bayonet mount on the other side, so you can connect it to the camera.  Using the lens 'backwards', you can get much clsoer.  The downside is that you can't control the lens.  Development is manual and you cannot change the opening.

  • How to make the decrement on listField list?

    IM create code like this:

    public class ScreenList extends MainScreen implements ListFieldCallback{
        String x[];
        ListField list;
        public ScreenList(){
            String arr[] ={"1", "2","3","4","5","6"};
            list = new ListField();
    
            int length = arr.length;
            x = new String[ length];
            for(int i=length-1; i>=0; i--){
                x[i]=arr[i];
                //add(new LabelField(arr[i]);
            }
            list.setSize(length);
            list.setCallback(this);
            this.add(list);
        }
    
        public void drawListRow(ListField arg0, Graphics arg1, int index, int y,
                int width) {
            // TODO Auto-generated method stub
            arg1.drawText(x[index], 0, y);
    
        }
    

    If I always try on Simulator Simulator print 1,2,3,4,5,6, but if I try to print to new Label 6,5,4,3,2,1 result

    My question... How to make the decrement with listField list implements reminder? Thanks in advance...

    Oops sorry correction instead of length use length - 1

  • How to make animated gifs to work in FCPX?

    Hello

    How to make animated gifs to work in FCPX?

    They work in FCP7 (FCS) but not FCPX. Strange.

    assailed

    Elmer

    If you had FCP7, you have Quicktime 7 Pro (upgraded automatically at installation FCP7). Check your Applications > Utilities folder.

    Open the gif in QT7 and export as... (Sequence Quicktime Movie > Open Options)... might as well go with ProRes LT and make sure that you pay attention to the size option (select current if the original is 100%).

  • How to make live iPhone photos 7

    How to make a live Webcam picture on my new iPhone 7

    http://help.Apple.com/iPhone/10/#/iph1e767793c

  • Can you please tell me how to make the thicker arrows on the Pages.

    Can you please tell me how to make the thicker arrows on the Pages. Thank you very much. There is something incredibly simple to do, but I, having a disconcerting brain, am totally unable to understand. Please please help me. Thank you

    < re-titled by host >

    Try here > Pages for Mac: Add and edit forms

  • How to make the list of instrumental music

    How to make a list of all my player someone help

    Alan

    iTunes is not a method to determine what tracks have vocals. You can create a normal playlist and put what you want in it.

    TT2

  • How to make itunes on an Android 5.1.1

    How to make itunes on my android5.1.1

    Do you mean how can you get an app called iTunes on your Android? If so, you can't. You can, however, download the app Apple music store Google play.

    Or, do you mean, how can you get the music you bought on the iTunes Store on your Android? You would be transferred in any way that you usually transfer the music on your phone. Drag and drop generally works very well.

  • How to make a wired internet connection to my macbook pro?

    How to make a wired internet connection to my macbook pro

    < removed >

  • How to make an update of location to a group of photos at the same time?

    How to make an update of location to a group of photos at the same time?  This used to be a feature in iPhoto.

    I use El Capitan 10.11.6 and Photos 1.5

    If yu have OS X 10.5.1 s you say that you can not - with OS X 10.11.6 Photos 1.5 (a free update in the app store) you select them and info - enter the location and it will apply to all photos

    LN

  • How to make a screenshot?

    How to make a screenshot?

    We can help with Firefox for Android, but we still don't know the ins and outs of the differences in system on all Android devices. To do this, you could use an Android-enthusiast forum like: http://forums.androidcentral.com/

Maybe you are looking for

  • Update the carrier settings

    Hello I'm trying to unlock my old 5 c of 3. It was purchased before January 2014, so it has not already been unlocked. I downloaded the latest version of itunes, restored and software, then was propmted to update the carrier settings, I did, but it a

  • 110. 050 l: HP 110 - 050 (Upgrade) l desktop PC

    Hello I have HP 110 - 050l and I want to upgrade this core i3 3240T for core i7 processor 3770, does my motherboard support? I want to buy Mini PCI-Express 2-port SATA III product linkand then I connect this port to my ssd. Is it possible? What do yo

  • .Ini file reading chart

    I need to read in a short array of strings from a file. I don't want to add other files and I was wondering if there was an easy way to read an array of strings from an ini file. Given that this is a dozen channels up, I guess I could do brute force:

  • im not able to watch movies insofar as it says install dvd set and I do not know how?

    A few days ago I got this laptop, my brother sent and I tried a lot for watching movies via my laptop but it is not working at all. It is said the media player can't play cause decoder compatible DVD is not installed.

  • HP Envy 6 - 1010ea HDD and SSD upgrade

    Hello I am looking to remove the existing HARD drive and msata SSD with the largest capacity as a 120 / 240 GB msata SSD and 1 TB + HDD for primary storage. I know that come from 2.5 "HDD in a number of variations, especially when it comes to the hei