How to make Garland dell p2715q and p2415q with macbook pro
I bought 2 Dell montors, the P2715Q and the P2415Q, with DP in and drawers for chaining. I use the mini DP to DP of the cables provided with the monitors. They do not only mirrored between them and the Garland. I can, however, connect the two cables DP minis on ports 2 Thunderbolt on my MB Pro 13 "2015 Early and both monitors to display as independent observers in the display preferences, no problem. The only thing is that daisy chaining them does not work. Any suggestions or solutions?
Early 2015 13 "Pro MB, 8 GB RAM, Core i5 2.9
10.11.6 OSX
Monitors: Dell P2715Q and P2415Q
To my knowledge, OS X is the limit. He has never supported other than own Apple Thuderbolt poster chaining. You can do a quick web search to see if it has changed, but this question has been around for years and I've never known anyone to get 1.2 DP chaining to work with something other than Apple monitors.
Tags: Notebooks
Similar Questions
-
How to make a wired internet connection to my macbook pro?
How to make a wired internet connection to my macbook pro
< removed >
-
Dell P2715Q + U2715H w / 15 "MacBook Pro late 2013
I recently bought a Dell P2715Q via the Dell Web site to run with my MacBook Pro late 2013 w/NVIDIA GeForce GT 750 M, Yosemite 10.10.2,"limited which I am very happy with 15".
I'm running the P2715Q via the Port Thunderbolt at full resolution 60 Hz.
I'm considering buying a U2715H to run as a second screen. Is it possible to run a U2715H display via HDMI port at full resolution 60 Hz?
I tried to launch a Thunderbolt Apple display through the second port Thunderbolt and couldn't get two monitors to work when the P2715Q ran in secondary mode STD to 30 Hz. ideally I want to save the second port Thunderbolt for my drive external HARD in any way.
Thanks for any help you can provide.
I don't know if this helps, but what are the maximum rates. The MBP supports the latter, no idea.
P2715Q
maximum resolution of CDM/DP 3840 x 2160 30 Hz or 60 Hz
HDMI 1920 x 1200 60 Hz maximum resolutionU2715H
maximum resolution of CDM/DP 2560 x 1440-60 Hz
Maximum resolution 2048 x 1152 HDMI 60 Hz -
WRT1900AC and OpenVPN with Macbook Pro
I'm trying to set up a VPN connection to my home network so I can access the shares on a WD My Cloud EX2 NAS device when I am absent in the same way as when I'm home and connected to the network. Here is where I am: I have installed successufully Tunnelblick on my mac and to set up OpenVPN on the WRT1900AC. When you are connected from an external network I can access my router and NAS using the LAN IP addresses as well as ping devices on the local network (printer, etc.). What I can't do, is see the NAS on my mac, or use the links I created folders in the shares on the NAS.
I thought that the function of OpenVPN was supposed to connect to my network, I would be able to access these things? Am I misunderstanding something here? I understand that this connection will not carry my internet traffic through my router, but I don't care on this issue at this stage. I just want a perfect access to the NAS at home.
Thank you!
VPN solutions have problems with DNS. I recommend the use of links address IP NAS instead of the NAS network name if that's how the links are currently configured.
-
How to make more old Hoyle and Broderband card games to work in mode full screen on my Sony notebook with Windows 7
Hi Gary,.
1. what version of Hoyle card games you try to play?
Try the game in compatibility mode. To install the software in compatibility mode
1 right click on the Setup file, and then selectProperties.
2. click on thecompatibility tab.
3. incompatibility mode, check the run this program in compatibility mode for: option.
4. Select one of the following operating systems:Windows 98/Me/XP/2000 , from the options offered.
5. click onapply and OK.
See the link below for more information on compatibility mode:
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-WindowsIf the problem is only with these games you may need to contact the manufacturer about this issue.
Bindu R - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think -
Effect of smoke steam - how to make realistic water vapour and wipe
Hello
looking for a tip or tutorial how to make a realistic smoke effect as with steam on glas. I want to use for the production of steam video in Adobe Premiere.
I want 2 stage:
(1) video coverage with increase in smoke steam (not more than 2-3 sec).
I try with the laboratory of particles but the effect was so childish video and smoke covers not more than video. The effect was like ghost as to the title of the video and no coverage on video.
How to make smoke to cover more video and how to make this realistic effect?
(2) I saw glass and the glass is taken up with steam and grave. Behind glass, I see video blurines with people.
Glass wipe invisible hand and I see hollow wiping shape this people. How to do this? I I think that just take a few PNG with steam n the water down and cover the videofilm and animate the wipe.
But how? How to animate the wipe on glass and wipe the steam and drops? With what effect? How to animate it?
His chaotic, I know, but give me nail, tip, hint or tutorial for this problem of resources.
Sorry for my FR.
I have Adobe CC last package.
I would use the Fractal noise to create steam. Put on a mask to feathers on the layer to make the shape you want. Tweak the parameters, you should get a few nice smoky eyes.
Then I would use an adjustment layer to change the levels of shooting (to decrease the contrast and add some blur to make it look like the steam on the glass.) Then, I would use another layer as a track matte to he will wipe away.
-
I buy a new mac. How to make my adobe account and my current computer applications to the new?
You should only install and connect on the new machine. Your license allows you to have two functional facilities, so if you want you can keep the original as a backup. If yu can just log out of the old machine and will release that the activation of another facility elsewhere.
Download/install the desktop application, connect and install applications subscription.
https://helpx.Adobe.com/creative-cloud/help/download-install-app.html
-
How can I get my menu bar on my macbook pro? The dock also disappeared. I know I have to take my pointer upwards (or downwards), but it's a waste of time and that bothers me. Its only happens on Safari, and not on other applications.
You could try starting in safe mode:
• Try safe mode if your Mac does not end commissioning - Apple Support
Which can allow additional troubleshooting.
Also, sometimes there may be a hardware problem which may help a SMC reset with
Depending on the cause:
• Reset the management system (SCM) controller on your Mac - Apple Support
You can try the test equipment to see what appears in the results:
• With the help of Apple Hardware Test - Apple Support
Other options include an appointment with a genius of Apple Store or a
service provider authorized Apple for the device inspected, diagnostic tests, etc.
There may be system software or hardware problems, in order to solve the problems with the aim
to see what the cause, can take time. If you have a backup in Time Machine &
end by using OS X Recovery to see OS X Utilities usage, disk utility or
other functions, be aware that this can make the more advanced features; It may not need.
Because this question appears as a symptom in Safari, which makes it more curious.
• Stop the pop-up ads and advertising on Safari - Apple Support
http://etrecheck.com/ http://www.adwaremedic.com/index.php
There may be a weird extension in Safari that may relate to some adware or other
elements, so this is another issue to consider. a report of Etrecheck may tell you if
some candidates are there; but maybe not. I do not primarily use Safari
so, my other two browsers work slightly differently.
Good luck & happy computing!
-
How to make a diagnosis on an early 2009 Mac Pro el capitan running?
How to make a diagnosis on an early 2009 Mac Pro el capitan running?
Insert and boot from one of the original installation provided with the Mac disks. She was listed on one of the disks.
You can download it here and burn a disc. You need to download for your Mac model.
-
WHERE to download and how to install windows 8 oem and register with the key from the BIOS
My friends sony vaio has been formatted it has not support recovery pls tell me WHERE to download and how to install windows 8 oem and register with keys from the BIOS
My friends sony vaio has been formatted it has not support recovery pls tell me WHERE to download and how to install windows 8 oem and register with keys from the BIOS
See here, make sure you download the correct edition:
-
I have upgraded to the new operating system, El Capitan 10.11.4, and now my MacBook Pro is in trouble. Should I uninstall the new system and if so how?
Restore the backup that you did when you replaced the old system
-
How to open the files .fxm and .fxr with fax windows 7 & scan?
How to open the files .fxm and .fxr with fax windows 7 & scan? These faxes have been received when I had Windows XP.
Hello
A file with FXR and FXM file extensions is a Document received from WinFax.
You can open the FXR and FXM file by double clicking on it and let your PC decide which default application should open the file. If no program opens, the FXR and FXM file, then you have probably an installed application that can view and/or edit FXR and FXM files.
You can use a Notepad or another text editor to open these files. Number of files is files read-only, which means little matter file extension, a text editor may be able to view the contents of the file properly. This may or may not be the case with FXR and FXM files, but it's worth a try.
How a FXR and FXM files:
There are two ways to try to convert a file to a different file type:a. open the FXR file in its default program and choose to save the file open in another file format.
b. use a softwarefrom online file conversion to convert these files to another file format.
Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.Thank you
-
Hello
I want to give as open & export to the level of permissions.
How to create user defined groups and users with custom permissions as only open and export in obiee 11 g?
For example, if the group permissions, inturn should reflect on the users.
Please help me.
Thanks in advance,
A.Kavya.
Your question is quite broad and fuzzy then I suggest the security catalog presentation to read documentation: http://docs.oracle.com/middleware/1221/biee/BIESC/mgrgrpsusers.htm#CIHIBJGD
And I think that you mix you two things which are managed in different places:
) an object as read access permissions, write, delete... which control you through the object "Permissions" dialog box
(b) functional privileges controlled through "Manage privileges" under "Administration".
-
I have recently upgraded my MacBook Pro and Adobe creative suite 6.0 on the former. It of maybe a stupid question, but how do I get the software on my new MacBook Pro? My understanding is that my serial number only works with one computer at a time?
Hello
You can install a copy of the software on the second machine it's just you are authorized to use on one machine at a time.
You can check: how many computers can you install or run Adobe software on? ProDesignTools
End user FAQ license contracts
Please visit the given link to download CS6: applications download Creative Suite 6
Concerning
Bianka Attre
-
How to get slideshow to pause and restart with AutoPlay enabled? Is happening in all the slideshow does not restart once a picture is selected
tytothoughts It is a very old thread, in the grand scheme of things. In the current version, you can set slideshows and compositions to restart after a while after having been suspended.
David
Maybe you are looking for
-
No neighbors listed on gift request screens and can not enter one
Pop - up screen in farmville to send gifts to neighbors. In version 3, it works by listing all the names of neighbor and you can select or add a few. 4 no names are listed and I can't enter all names. More when I select the skip option, it does not c
-
Edge 15 does not start in Win10 after upgrade
Updated 15 edge of Win8.1 to Win10 today. Everything was fine, then an installation file is stuck so I held the power button for a forced stop. When I turn on again, I get nothing, just a blank screen. (I couldn't even Lenovo logo) After an another p
-
How to call asynchronous Subvi with version 8.6
With the new 2011 version, labview has a function to start the asynchronous call, but version 8.6 is not. I want to call sub - VI, but not waiting for Subvi to finish before running the next step in primary vi. An asynchronous call to a Subvi starts
-
My partner loves Cityville and Frontierville. Recently she can't read them on his laptop. He keeps asking him to download flash player 10. It does not cure the problem. I can still play these games on main pc
-
I got a refurbished pc includes a CD of windows XP SP3, I want to use it to install windows in the other computer and I need the product key.