"How to make sound to work? on Windows 7»

Similar Questions

• Im having problems with getting my sound to work on windows 7 RC 7100 32 bit I tried to use 2 soundcards.

  original title: Audio does not work

  Problems of sound in windows 7

  Hey all. Thanks in advance for any time you spend to help me.

  Im having problems with getting my sound to work on windows 7 RC 7100 32 bit
  I tried to use 2 soundcards.

  1: creative X - FI Extreme
  for creative people, I tried using drivers creative Beats, creative version drivers and vista 32-bit drivers with no luck.

  2: its integrated with Intel DP35DP motherboard card
  7 drivers are available for intel sound I used vista 32 bit since no windows drivers.

  I have 3 device failed in the Device Manager. Simple PCI controller, peripheral Audio communications of high definition, Microsoft makes confidence audio drivers.

  the 3 rooms of this note.

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  with or without pilots the warrning does not change.

  System Spec.

  Card mother Intel DP35DP
  3 GB ram
  Core 2 duo E8400 with
  ASUS Nvidia Geforce 8800gt
  Creative X - FI extreme pci / Intel integrated audio system
  Termaltake 600 watt Toughpower supply
  Pioneer dvd Sata burner

  Managed to solve this problem by installing the 64-bit windows 7 instead of 32 bits.

  not sure why the sound failed. but now its fixed.

• How to make a backup of my Windows Vista?

  Hello.

  Windows Vista has been installed on my Toshiba laptop when I bought it.

  How to make a backup of my Windows Vista and I need to?

  Can I do a backup on a CD, or how?

  I think I have to need if I get a virus and you need to remove and install from the beginning.

  Thanks by

  Hello

  I think that it s a good idea to make a backup on your laptop.

  You have created the Toshiba recovery disks? When you bought a Toshiba laptop, you must create these disks. If you have a virus or something else with these discs, you can get the factory settings on your laptop.

  You can create discs with the Toshiba recovery disc creator and if you didn t again, you get the following message:

  > Important INFORMATION
  >
  > your system is equipped with a hard drive recovery system. If you need to repair
  > your computer in the restaurant to original factory State, you can do it directly
  > drive hard (press F8 when you start your computer, choose "Repair your computer"
  (> and follow the instructions in the menu) or create a media drive bootable recovery for this purpose.
  >
  > Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the
  > Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer
  > is seriously damaged

  So create one and if you need, you can get factory settings with Windows, drivers and tools in minutes.

  If you want to make a backup of your laptop with all the software that was installed by you, you must use programs such as Acronis True Image backup.

  Bye!

• How to make a backup of the Windows BACKUP DELL?

  I have a Dell 0ptiplex 3010 with windows 7 pro 32 bit 10 units.
  How to make a backup of the Windows BACKUP DELL?
  Please help, I'm still confused with BACKUP DELL.

  Hi rahar_satriyo,

  Only the version complete Dell backup and restore will give you an option to backup computer image which is a paid version. The default Basic that comes with the system version will have only the restore factory in image.

• How to get joystixpro to work in windows 7

  How to get joystixpro to work in windows 7

  Original title: Joystix Pro

  Hi Alan,

  (1) what happens when he tries to use Joystix Pro on his computer?

  (2) what is the full error message?

  According to joystixpro support, Windows 7 supports the use of Joystix Pro.

  I suggest you refer to the procedure described in the FAQ mentioned in the link Joystix Pro

  https://www.joystixpro.com/what-is-joystix/FAQs/

  If this does not help, I suggest you to contact the Joystix Pro support:

  http://www.joystixpro.com/Forum/Forum.php

  https://www.joystixpro.com/support/

  Check the link for more information;

  https://www.joystixpro.com/what-is-joystix/what-do-i-need/

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• How to make a website added to Windows RT support flash on this website

  How to make a website added to Windows RT support flash on this website

  There are 2 ways to hack into the white list of flash on IE.

  (1) modify the registry, see http://msdn.microsoft.com/en-us/library/ie/jj193557(v=vs.85).aspx, section "Testing your site" here

  (2) change the whitelist file C:\Users\XXXX\AppData\Local\Microsoft\Internet Explorer\IECompatData and Compatible stop see updates. See here http://thenextweb.com/microsoft/2012/11/05/how-to-use-microsofts-own-whitelisting-feature-to-enable-flash-on-the-metro-version-of-ie10/?awesm=tnw.to_kY5p

  However, both methods are deprecated, especially the other. You must take the risk, of course.

• What it takes to make Adobe XI work on Windows 10

  Are there updates to win 10?

  What it takes to make Adobe XI work on Windows 10?

  Adobe is the name of the COMPANY... you hear Acrobat?

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign permissions... said FULL yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• How to make the printer work with the new Windows 7 laptop?

  can someone me please help... my printer is windows xp and I just got a computer laptop windows 7, how can I make my printer work with my laptop!

  Thank you
  need help with my printer

  Hi gingerbabe001,

  To set up and install your printer, see the link below.

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=setupCategory&cc=us&DLC=en&LC=en&OS=4062&product=1153754&sw_lang

  Good luck.

• Compaq Presario R3000 how to get the sound to work with Windows 7 RC

  (1) download SP29586.exe: ftp://ftp.hp.com/pub/softpaq/sp29501-30000/sp29586.exe

  (2) execute, create a swsetup c:\ directory

  3) once all files are extracted DO NOT INSTALL

  (4) now Goto the Start Menu click on devices and printers, click the name that you called your machine this will mark will be a yellow triangle as the audio driver windows 7 already installed is a realtek ac 97, which does not.

  (5) once your Machinename, you will see a general tab and then Hardware tab select the Hardware tab.

  (6) seeking the Realtek ac 97 under the functions of the device, select it and click Properties,

  (7) tab now the driver, now click on update driver.

  (8) select Let me pick from a list of device drivers, now click on disk

  9) click Browse, select the following Swsetup\SP29586\SMAXWDM\W2K_XP location and click smwdmCH6.inf

  (10) the Soundmax driver should come now select ok and next year. Now your sound will work

  Go on the side of Support HP and look for drivers for Presario R3000 and download the driver for Audio "SP28552" but do not install it. After you download the driver, search for the driver on the folder file download you too and right-click on it and select properties and then select "Change the setting for all users", once the pop-up window, select Compatibility Mode and select it for Window XP Service Pack 3 all the and click ok. Once you ok it click on the file to put in place and follow the steps.
  
  I did it on my Compaq Presario R3000 which has Window XP and I installed Windows 7 Enterprise 32 bit on it and it awesome except for the Audio that I just decided to work, but I still have problems with the Base system device drivers.
  
  I hope this help you with the problem of noise.

• How to make the disc Bootable to Windows 8

  Hello

  I just bought a DELL Inspiron 17R laptop computer which came with Windows 8. I need to make a disk Bootable to Windows 8 so that I can install my old windows 7 first and dual boot Windows 8

  I need Windows 7 very badly as my Unigraphics NX works on Windows 7

  How can I do?

  Is it possible to download windows 8? (As I already have a product key)

  Thanks in advance

  Hari

  See the following topics:

  http://en.community.Dell.com/support-forums/software-OS/f/4677/p/19471699/20208507.aspx

  With Windows 8, Microsoft changed stickers that have the product key that the user must type in during the installation of the operating system of new embedded BIOS product key. The idea is that by eliminating the tile, you eliminate one of the easiest ways for nefarious users get a legitimate product key. The sticker also eliminating product key removes any concern that the vignette could get damaged while at the same time eliminating the long and irritating the process of typing in various letters and numbers in the installation of the operating system.

  If the user has to reinstall the operating system on a computer with Windows 8, the installation process automatically captures key software product of the motherboard BIOS without input from the user. This means that these stickers familiar windows product key will no longer appear on Windows 8 computers.

  ---------------------------------------------

• How to make a recovery CD for Windows Vista Home Basic?

  A friend recently gave me a laptop Acer 5315 to play with (I like to play with the old pc...). It came with Win/Vista Basic Home Edition. I got to level with SP2 and 2, kicking the 2gig memory (this is the limit) and now I want to create a backup/recovery disk. It has a CD inside player, but is limited to CD (not DVD). I've been looking around, but apparently creating a Vista recovery disc without the original install disks is not easy. It's true.

  Anyone have any ideas?

  Hello

  Strange that it is limited to the CDs, Vista came on a DVD, unless you have specifically ordered CD from Microsoft if you had a license to retail not OEM...

  Use an external hard drive.

  If you want to make a complete PC Backup or a backup file only, buy an external hard drive.

  Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.

  All editions of Vista can do backups of files.

  Here's how to back up and restore your files:

  "How to back up your data.

  http://www.wintuts.com/how-to-backup-your-data

  http://www.home-PC-help.com/windowsvistabackup.html

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

  This is how to do a full backup of the computer and how to restore it (for Vista Business, Ultimate and Enterprise only):

  «How to make a backup of the computer in Vista»

  http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

  "How to restore a full backup of the computer.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  FAQ from Microsoft about backup and restore:

  "Back up and restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are a number of 3rd party programs available for a full backup of the computer; others, you must pay for, some are free.

  This program must be purchased:

  "Acronis True Image".

  http://www.Acronis.com/homecomputing/products/TrueImage/index_gwo.html?utm_expid=4274314-6

  These are free programs for the protection of the computer:

  "EaseUS Todo Backup free"

  http://www.TODO-backup.com/products/home/free-backup-software.htm

  "AOMEI Backupper Standard for Win7.

  http://www.backup-utility.com/aomei-backupper-for-Windows7.html

  "Download Backup & Recovery 2012 free FREE!

  http://www.Paragon-Software.com/home/BR-free/download.html

  «Macrium Reflect FREE Edition»

  http://www.Macrium.com/reflectfree.aspx

  See you soon.

• How to make an account admin on windows 8

  So I just got windows 8 and I want to know how to make an account admin and other accounts.

  Thank you for reading this. Look forward to the answers.

  The account was created while installing win 8 is an administrator account.  Use it to 'promote' a standard user to administrator account.

• How to make buttons not working set MovieClip in flash?

  I'm doing an index page with buttons for a photography website.  the entire page is built in flash to date.  My question is that I created a drop down menu which is a Movieclip with 5 buttons.  I can't assign an external web page to each buttons located under the film clip menu drop-down.   Is this possible?   The clip is managed by hover your mouse over the 'studio Gallery' button in word.  It descends from the 5 gallerbuttons (Portrait, children, weddings, babies, artistic, etc...).  In Flash 8 Pro I know I can assign a child named external web page on the homepage, but how can I assign these to buttons in the drop down when the movieclip is done.  That's where I need to use folders with additional layers in the file to make it work?

  In case you can't tell I'm new on this and have taught my self with 'Training from the Source' and also 'Visual Quickstart Guide' so go easy on me - 8)

  Randy

  What you need to do, it's Google search using «Tutorial dropdown AS2»  Who should produce some results that you can use to guide you through the process.

  I can't clearly tell from your description, up to now, but it looks like your movieclip contains buttons and a bearing is assigned to it.  This rollover crashes interacting with the buttons.  So your best bet is to get your hands on a tutorial that will guide you through the process so that you can make your buttons work as you wish.

• Can I make Acrobat 6 work on Windows 8?

  I need 6 working on Windows 8.

  SKClawson

  your only hope is to use compatibility mode by using one of these bones:

  Microsoft Windows XP Tablet PC Edition,

  Microsoft Windows 2000 Professional Service Pack 2.

  Microsoft Windows XP Home Edition,

  Microsoft Windows XP Professional,

  Microsoft Windows NT Workstation 4.0 SP6

• How can I make dreamweaver 8 works on windows 10

  I installed 10 windows on my hp computer a reinstalled dreamweaver 8

  As soon as I open it it closes

  How can I make it work.

  Please I need it's hard

  Thank you

  Christiane

  Solution for installing or opening Dreamweaver issues on Windows 10