How to make your own Board BNC connector for 37 pins PCI-6010?

This is first time I am doing data acquisition and the BNC-2110 present can be connected to PCI-6010. How to make a Board for it?

I'm not sure what you mean by "some"; The BNC-2120 exposes all channels HAVE and AO on connector 0 of a standard feature of E, M or X series.

  • Eight BNC connectors are for eight differential channels of I. For example, for the BNC connector labeled 'I 0', the Center connects to the 'I 0' pine and the outside connects to pin 'HAVE 8'. (The BNC-2120 probably would not be a good choice for someone who wanted to use the channels in unbalanced mode).

  • Other two is for the analog output; the centres are ' AO 0' and 'AO 1' and transmissions are related to "AO GND".

  • There is another connector BNC for PFI 0; all other PFI (with the exception of the 10, 11 and 15) are broken down as screw terminals.

  • Other BNC connectors connect what either directly (the unit is powered by the + 5V line but otherwise works autonomously, and the "user defined signals' are connected to terminals to adjacent screws).

It seems like it wouldn't be difficult to have a cable that was going on a PCI-6010 the 37 pins on the connector 68 pins on the BNC-2120. I'm a little curious as to why we do not have one. Possible reasons off the top of my head which may explain why not:

  • cards PFI/description would be a mistake (for example, on a series of E/M/X ' CTR 0 SRC "PFI 8; on the 6010 is PFI 0.)

  • No digital lines (E/M/x series P0.0 P0.7 via are independent; on the P0.0 6010 P0.5 and P1.0 by P1.3 are shared with PFI lines)

  • Confusion about being able to connect to other devices that we sell with connector d - SUB 37 pin, but who do not use a compatible pinout (for example, the PCI-6239, PCI-6510 or the NI 9237). Here again, a PCI-6703 also uses a 68 connector pins, but has a completely incompatible pinout as well.

But it seems that those who would be pretty easy to deal with, because it is useful to be able to connect to the BNC-2010. Maybe it's an idea for the Exchange of ideas information Acquisition?

Anyway, if you want to have pushed BNC for everything on your Board of homebrew will need you:

  • 8 or 16 BNC connectors to HAVE, depending on whether you want single-ended or differential. For differential, the centres are GOT by AI 7 0, and transmissions are AI by AI 15 8. For asymmetric, the centres are HAVE 0 through 15 AI and transmissions should all connect to GND AI.

  • HAVE a sense (I think that you only need this if you use channels Nonreferenced Single - Ended (NRSE). See also: noise considerations for analog signals and field wiring.)

  • Two for AO (centers are AO 0 and 1 AO, outers times connect to AO GND).

  • Ten for PFI/digital lines. Outers will connect to GND D.

Up to a maximum of 29. You want maybe less, depending on your application.

Tags: NI Hardware

Similar Questions

  • How to make your own custom methods in AS3?

    I was wondering if I could make my own method for the form.
    I wrote a little function to draw a line with a square brush from one point to another point.

    Now at the moment it's just a function as follows
    function drawSquareLine (shpe:Shape, x 1, y1, x 2, y2, brushWidth, color) {}
    with (SHPE)
    {
    graphics.beginFill(0xFF0000,1);
    graphics.lineStyle(.25,0x000000,0);
    graphics.moveTo(x1,y1);
    graphics.lineTo(x2,y2);
    }
    }

    However, I thought it would be cool if I could do as a custom method (is that the right terminology?)
    So, instead of providing the form as a parameter of the function could... do call that?

    shpe.drawSquareLine(x1,y1,x2,y2,brushWidth,color);

    And if so could I have an example on how I could do this?

    Bravo guys.

    Excellent.
    you explained that perfectly (and it still took me 40 minutes to understand).

    So I in the outer class .as file
    package {}
    import flash.display.Shape;

    public class lineTool extends shape
    {
    public void drawSquareLine(x1:int,y1:int,x2:int,y2:int,color:uint,brushSize:int)
    {
    var bsH:Number = brushSize/2;
    graphics.beginFill (color, 1);
    graphics.moveTo (x 1, y1 - bsH - bsH);
    graphics.lineTo (x 1, y1 + bsH - bsH);
    many lineTo etc.
    graphics.endFill ();
    }
    }
    }

    and in part 1 of my movie, I

    var shpe:lineTool = new lineTool();
    shpe.drawSquareLine (20,20,100,100,0xFFDDBB,10);
    addChild (shpe);

    Thanks for the second help :)

  • Make your own type of plan

    This is done just for the folks at Adobe, I wanted to you guys an email directly, but apparently there is no email address to...

    I didn't need all the apps available for $50 / month

    These are the following apps that I need:

    Photoshop

    Lightroom

    Illustrator

    Premiere Pro

    After Effects

    Hearing

    Is there a way I can pay just for these applications (and not pay $20 / month/app, otherwise it is worth it to buy all the)

    I do not work for Adobe, but I read this type of question many times before

    The answer is always no, Adobe has no plans to 'make your own '.

    Adobe offers two plans

    -Special photography Plan includes Photoshop & Lightroom and Bridge & Mobile Lightroom

    -l' set of Cloud http://www.adobe.com/creativecloud/catalog/desktop.html

  • How to make the updates of operating system for the limited user account?

    original title: how to make the updates of operating system for the limited user account?  Limited user account cannot access the Windows Update page, see instead cautioned against MS the most recent must be installed.

    XP Pro SP3 slipstreamed.  New a DBAN nuked HDD installation

    All the OS updates installed from Admin acct before creating the LUA

    AV installed AVAST

    all dot net uninstalled and then reinstalled to resolve a problem installing Quicken

    Updates to auto lit

    Active Windows Firewall

    Three solutions of workaround for Windows XP running as a limited user

    http://blogs.Computerworld.com/16502/three_workarounds_for_running_windows_xp_as_a_limited_user

    Survive a Windows XP Limited user account

    http://techknack.NET/surviving-a-Windows-XP-limited-user-account/

    See the response from Michael Kuntz - re: HAL files

    http://social.technet.Microsoft.com/forums/en-us/itproxpsp/thread/e8612ac4-b881-4FB3-85e7-32004932fb5f

    There is an available for installation of SP3 Cd

    Manually installing SP3 using the Microsoft Download Center or a CD

    If you have problems to receive the service pack from Windows Update, you can download SP3 as a standalone package from the Microsoft Download Center Web site, and then install SP3 manually. The installation package is intended for it professionals and developers, but you can always download and install this file.

    You can also order a CD from Microsoft containing SP3. For more information, go to the Microsoft site.

    To manually install SP3 using the standalone package installation or CD

    1. Do one of the following:

      • If you downloaded SP3 from the Web site, to install it immediately, click Open or run and follow the instructions on the screen. To install the program later, click on save and download the file to install it on your computer. When you are ready to install the service pack, double-click the file.

      • If you install SP3 from the Service Pack 3 CD, insert the disc into your computer with your current version of Windows XP running, and Software Update Installation Wizard should appear automatically. If this wizard does not appear, click Start, double-click my computer, click on your CD or DVD drive and then click AutoPlay.

    2. In Windows XP Service Pack 3 page, click Next.

    3. Follow the instructions that appear on your screen.

    4. Once the installation is complete, click Finish to restart your computer.

    5. If you disabled your antivirus software, turn it back on.

  • How to make a copy of windows 7 for my laptop

    I have a HP Pavilion Entertainment PC with windows 7.

    If I need to reload the OS on the pc, where can I get windows 7 to go because I don't have a cd/dvd with the operating system, when I bought the machine.

    I can make a cd... If Yes, where can I get the download.

    Thank you very much.

    kielmaedel

    How to make your recovery HP discs, these before do you recover the operating system from the hard disk, the use of high quality DVD + R media

    http://support.HP.com/us-en/document/c01895783#WhenCreate

    How to recover the operating system from the hard disk using F11 at startup.

    http://support.HP.com/us-en/document/c01895783#RestoreWithoutWindows

  • How to make photos of my printer-copier for my processor?

    How to make photos of my printer-copier for my processor?

    Hello

     
    1. what version of Windows are you using?
    2. What is the brand and model of the printer-copier?
     
    We need a scanner to digitize images and save them on the computer. If you have the application associated with the printer-copier, then use the same to scan the images.
     
    You can also use Windows Fax and Scan.
  • How to make a disk image of work for my windows 98se boot (original is long dead)

    How to make a disk image of work for my windows 98se boot (original is long dead).  I have a copy of Windows 98SE bought new off the years of the plateau.  I now have a 64-bit system, so I can't run it natively, but I discovered that I can't even run at all, because I don't have a working bootable floppy!  I thought that the CD is bootable, when I used it a long time ago, but now it does not start if I have used the disk? Anyway, can I get a driver Microsoft w/CD install/bootable disk, or do I have another decent resource?

    Thank you. You can contact me to the * address email is removed from the privacy *.

    http://www.bootdisk.com/bootdisk.htm

  • How to make a stationary State (or equivalent) for the form to change color and reveal some hidden above text...? is there a widget I could use?

    How to make a stationary State (or equivalent) for the form to change color and reveal some hidden above text...? is there a widget I could use?

    There are many solutions. A more simple: put the text and the items colored in the back and put the 'shape' on it. Configuration of the 'shape' become transparent in a stationary state.

  • GET RID OF THE POPUP "MY MSN, MSN TO MAKE YOUR OWN.

    * HI: At the opening of my laptop using Windows 7 HomePremium, whenever I get the PopUp BORING "MY MSN; "MAKE MSN YOUR OWN." Well, I already have MSN and default to "MY MSN" at the opening of the computer. HOW CAN I GET RID OF THIS ANNOYING POPUP, ONCE AND FOR ALL.

    WLD APPRECIATE YOUR HELP.

    Thank you.

    It seems that cookies are deleted when you leave ie9,

    Open ie9,

    Hold down the ALT key and type these letters to

    See if the Delete browser to exit history is enabled.

  • The best way to make your own lens flares and light highlights/streaks

    I have not money for Knoll Light factory lens flares so I need to make my own flares, splinters, highlights and streaks.  Anyone has any advice on the best way to do it.  Or is there somewhere a tutorial on it.

    Thanks in advance.

    With CS4 production premium on a Mac

    Classic: http://aestuff.myleniumstuff.de/?p=7

    Aside from that, you can generate a lot of light and reflections by stacking multiple effects and working with duplicates of the layer - extract the highlights using levels or threshold, apply the directional blur etc., coloring with Ting, Tritone or Colorama, apply a layer of mixture of modes to the source...

    Mylenium

  • How to make a backup recovery disk (usb) for my new XPS8700?

    Hello

    Please bear with me as I'm pretty much computer illiterate.

    I just bought a Dell XPS8700 with Win8.1 for my partner for Christmas.  It came with 2 TB HD cache & 32 GB of SSD.  Round 6 months. from now on I intend to buy a 120 GB SSD for upgrading its system & will use for the operating system.   I do not know how to do this (I have an idea... looked. vids online, etc.), but what I need to know is > how to make a backup for its new computer recovery disk (so that I can put it aside for when I get the new SSD).  I don't even know if that's actually what you still call it (recovert disc?) or if it is called "backup of factory drive?

    Basically, I want to put Win8.1 on a USB key so I can use this more later to reinstall it on an SSD.

    I bought a Lexar 32 GB USB (3.0) to use for this.

    Can someone "please" give me a step by step on how to go about doing this?

    Thank you!

  • I don't want to use this patch until my Norton Tool bar stiill can be used. How to make your guest to download leave me alone?

    The prompt to upgrade to the latest version of Firefox appears every few hours. I said 'Ask Me later' a lot of times and I'm really tired of it, but it seems to be my only choice. I don't want an upgrade until I can keep my Norton Tool bar that works fine now. So, how can I disable your pop-up infuriating? I'm not a geek, so please I need a simple answer.
    Thank you

    Edit: removed your email address from the public view, since the only thing that will attract are spambots. you will be notified by email whenever someone replies to the thread. (philipp)

    Hello

    Symantec (the people who make the Norton products) has taken the decision to withdraw support for their toolbar in the latest version of Firefox (in spite of having a lot of attention to do). I found this page which gives more details around this and plans to get a fix in place very soon.

    I recommend that upgrade you to the latest version of Firefox to take advantage of the new features and security enhancements that are included in the browser. There is a new version of reason rather quickly who has added and improved features of the privacy that you may be interested.

    If you do not want to disable update guests you get, type Subject: preferences #advanced in the address bar and select Update. This will present you the options to turn off the future, even if updates for general health and well-being of your web browsing, I suggest keeping Firefox updated and wait for the Symantec fix for your Norton product.

    I hope this helps, but if not, please come back here and we will try to find another solution for you.

  • How to make your custom data type used in your QListDataModel to QML?

    I have QListDataModel filled with objects of a custom class carying data and defined with Q_DECLARE_METATYPE. So far, it works however I can't access the data in qml:

    e.g. text: ListItemData.Name
    

    I read that this can be solved by letting QML know your custom class/type, but how to do this?

    See

    https://developer.BlackBerry.com/native/documentation/Cascades/dev/integrating_cpp_qml/

    example:

    qmlRegisterType("com.isec7.materials", 1, 0, "Account");
    
  • How to make your desktop Intel premium into a wifi hotspot

    I have a desktop connected to the Ethernet.

    Asking how to turn on wireless sound to use my wireless compatible Android smart phone.

    Hi Eugene,

    Thanks for posting your question in the Microsoft Community.

     

    1. What is the brand and model of the modem/router?

    2. who is the ISP?

    If you have a wireless router, you can connect to Internet wireless to your Smartphone.

    If you have a cable modem, you need to buy a wireless router to access the Internet wireless.

    For reference:

    Set up a wireless network:

    http://Windows.Microsoft.com/en-in/Windows7/setting-up-a-wireless-network

    If you need further assistance on this topic, let know us and we will be happy to help you.

  • How to make your laptop a wifi device

    Hello

    I have inspiron n5010 laptop with card dell wireless 1501. I use a wired broadband for internet.is there anyway I can make my laptop a wifi device so that I can connect my laptop with internet with wifi

    Hi aamerpk,

    Yes, the 1501 wireless card is capable of generating signals wireless mobile devices; You must install a software that converts the signals into mobile hotspot.

    There are free and paid software available online, controls this links:

    http://bit.LY/XlXY9S

    http://bit.LY/WA7vOu

    Note: This is a third party site, the site may have its own terms and conditions and there could be no warranties for the software. However try to install if necessary.

    Please answer for additional help.

Maybe you are looking for