Similar Questions

• How to manage users of Lightroom photo sharing with the family?

  I'm looking for some best practices on how to manage the workflow of photo sharing.  Obviously the user of Lightroom does not want family members to start messing around with photos outside of Lightroom, and if the photos are not JPGs family members may be unable to view them in any case.  A solution I can think of is to shoot photos in JPG format and in Camera Raw at the same time and save the jpg files in a folder accessible to all and only import Camera Raw ones in Lightroom.

  Flickr works as well.

• When using an adjustment layer to change the hue/sat (to make the fall colors), how to change hue/sat off the clothes clients and faces?

  When using an adjustment layer to change the hue/sat (to make the fall colors), how to change hue/sat off the clothes clients and faces?

  Choose the mask on the layers adjustment layer and paint in black in the areas that you don't want the adjustment layer to change

• I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have a hard drive. At least two partitions. C: 74.7 GB with 63.3 freespace
  D: 74.2 GB with 70.6 freespace
  These are my original specifications of the hard drive: 160 GB (7200 RPM) SERIAL ATA HARD DRIVE WI
  So I suspect there are at least one or more partitions hidden leaving 11.1 GB for hidden partitions!
  Windows is present on both drives C: & D:. In the directory windows on C:, the oldest entry is 19.12.12, 21.43 last 21.12.12, 22.50
  The first entry in the directory windows on D: is 19.12.12, 18.42 the last 21.12.12, 22.40
  I hope that makes sense to someone, any help gratefully received!

  As long as you have verified you dΘmarrez done on the c: / partition, Yes, you can reformat the drive D: / partition using Windows 'disk management '.

  J W Stuart: http://www.pagestart.com

• How to manage what programs open when I turn on my Mac

  How to manage what programs open when I turn on my Mac

  System Preferences > users and groups > Login. Unlock the padlock (bottom left), select the item you want to remove, and then click the sign less.

• How to manage the tv after hdmi to hdmi connection

  I want to connect to my computer windows 7 with tv on my Vizio tv hd tuner. I intend to use the hdmi to hdmi connections. After that I made the connection how to manage the tv without going back to the computer. My TV is in another adjacent room to my computer, sbout 20 ft away. Can I use a wireless mouse to manage the tv? The monitor and tv both appear at the same time? What are other options? Thank you for taking my question and to meet others, I put in the forum. Donnie

  I guess that the xbox 360 is a must for my setup. Thanks for your reply, Donnie

• How can I get two jobs when using two monitors, instead of stretching a desktop on both screens?

  Hello!

  How can I get two jobs when using two monitors, instead of stretching a desktop on both screens? I n ' want to clone my office, and I don't want to stretch it. I want two desktop computers, where I can "send/give" to the other desktop programs.

  I need a third party program? It is very good. If you know one please tell me about it.

  Hi OskarKvist,

  This feature is not supported by Windows XP.

  However, you can use your favorite search engine to download any third-party software that could serve the purpose.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• How to manage the SOAP response

  Hello (beginner vCO),

  I use the SOAP Plugin and trying to figure out how to manage the here, a host of SOAP response is the log I get the SOAP response

  [12:53:43.124 2014-05-09] [I] the settings...

  [12:53:43.135 2014-05-09] [I] the available settings:

  [12:53:43.136 2014-05-09] [I] + parameter name: "GetRequestStatusResult", value: "< response >

  < item >

  < ServiceRequestID > SR138917 < / ServiceRequestID >

  OS DEPLOYMENT < ServiceRequestStatus > < / ServiceRequestStatus >

  < ServiceRequestCreated > 09/05/2014-15:20:25 < / ServiceRequestCreated >

  < ServiceRequestCompleted > < / ServiceRequestCompleted >

  MA138921 < CurrentActivity > < / CurrentActivity >

  OS DEPLOYMENT < CurrentActivityTitle > < / CurrentActivityTitle >

  < ActivityStartUTC > 09/05/2014-15:32 < / ActivityStartUTC >

  < ActivityEndUTC > < / ActivityEndUTC >

  < DurationTotalSeconds > < / DurationTotalSeconds >

  < AverageDurationSeconds > < / AverageDurationSeconds >

  < SecondsOffAverage > < / SecondsOffAverage >

  < EstimatedCompletionUTC > < / EstimatedCompletionUTC >

  < / OutputParameters >

  < warning > < / warnings >

  < exceptions > < / Exceptions >

  < / response > '

  It will be better to try and parse text or try and use another method with vCO

  If you haven't done so already, take a look at the action of com.vmware.libarary.soap.processOutParameters.  It is the action that generated the log you have placed in us.  It generates an object Properties (key, value pairs) with the value for each setting that results.

  In your case, assuming that 'outProps' is the result of the above, you can use:

  var getRequestStatusResult = outProps.get ("GetRequestStatusResult");

  And to analyze the code XML with E4X as Ilian said.

• How to import a photo to be used as a layer

  How to import a photo to be used as a layer on the original background layer. I have pictures that I would like to insert in this strip of photo negatives.

  This can be fairly simple, but I'm new to PES 10. Thanks for your help!

  

  Command/O to open a new photo (control/O if you're on Windows)

  Double-click the name of the file to open in a new window

  Command/A to select all

  Command/C to copy

  Double-click the thumbnail of the original photo (bottom)

  Select layer/new/layer and then return to create a new empty layer

  Command/V to paste the new photo in the new layer

  Choose from the options under Image/transform to deform it go where you want.

  Welcome to PSE

• I would like to know how to manage the ASN.1 encoding/decoding in LabView?

  I would like to know how to manage the ASN.1 encoding/decoding in LabView?

  Hello J,

  in the example given here , it looks like a format simple bytestream...

  You must read the byte stream, get the first and the second byte to decode the data type and length and then read & catalogued according to number of bytes. And then read 2 bytes and so on...

  Encoding will work the same but in reverse

• How to manage the runtime at the stage of PreUUT error when running in parallel mode

  I would like to run Test DUT in parallel mode, and some actions are made in PreUUT of this kind of reading serial number and control of the aircraft.
  The model of process don't goto PostUUT step when the runtime error occurs at the stage of PreUUT, so I would like to add a few things to check if error in the cleaning of the sequence and return to the configuration at PreUUT stage, but I think it's jumping all the actions of installation and the main stage?

  What should I do if I want to go back to run PreUUT again after the first run when the runtime error occurs?

  Or, is it a good way to handle this kind of error withour restart of the program?

  Bandaged,

  There is no decent way to do this. The reason is the following: TestStand assumes that failure in the facility to a unique testsocket mechanism, it is senseless to proceed with this testsocket at all. It is recommended to manage the routines of judgment in this case using the SequenceFilePostStepRuntimeError callback. You also can use this callback to execute a loop on the step that creates the error until the error is resolved.

  By default, TestStand does not support a tribute of the error but the proceedings concerning the execution of shots. You can just ignore the error (deletion of the error indicator) or you can implement your own features. For example, you can set a custom fault indicator which will be evaluated as a first step in your hand. If the flag is set, ignore you everything in your hand.

  I know that this suggestion seems not to be a good idea because it's 'hack mack', but it solves your problem. TestStand, as already the State evaluates the execution errors that occur in the PreUUT as to the deficiencies of the system and carry out any checks is not suggested.

  Norbert

• Acrobat spit - how to manage the use of the RAM?

  I set up a script to turn on and turn off a large number of lists of my layers to pdf at once. The Acrobat crashes when I use it with large PDF files, about 60 layers. At the beginning I really it would be a mistake, so I checked all the functions and added on all exception handling functions. The program always crashes without throwing an exception (to be sure, I've putted app.alert (...) in the catch block). Then I realized that the Acrobat crashes if it involves up to 500 MB of RAM, on the other computer 450 MB. It is possible at all, he's blocking because of lack of memory? If so, is it possible to manage it somehow? (increase more RAM to the program or delete some variables, which use no more when running or there is some garbage man)? I would like suggestions.

  It is possible at all, he's blocking because of lack of memory?

  Definitely.

  If so, is it possible to manage it somehow? (increase more RAM to the program or delete some variables, which use no more when running or there is some garbage man)?

  Nothing you can do about it, except to try to optimize your code. Unfortunately, Acrobat has a very bad memory of management mechanism and tends to choke or crash during execution of the tasks.

• How to manage the VM Ware Infrastructure using Wnidows Power Shell

  Hello

  can any one post any pdf/blog link etc. which can learn to manage the VM Ware Infrastructure using Wnidows Power Shell, bases of the.

  If anyone has the link to the pdf or pdf itself, please share.

  VMware with Windows PowerShell TFM [PIN] infrastructure management

  http://www.Amazon.com/Managing-VMware-Infrastructure-Windows-PowerShell/DP/0982131402

  Thank you

  Ashish

  Hello

  Luke describe.

  Window Powershell is installed in windows server 2008 and above. For other MS operating systems, you can download it from the microsoft support site.

  Can VMware PowerCLI you find here

  https://my.VMware.com/Web/VMware/details?ProductID=285&downloadGroup=VSP510-pcli-510

  Frank

• How Pix manages the rare IP protocol packets

  Does anyone know of a document explaining how the Pix handles, regarding the State, rare IP protocol packages such as ESP, AH, OSPF, GRE, etc. ? I'm concred with traffic flowing through the pix is not intended.

  I understand how TCP, UDP, and ICMP packets are handled, but I can't find anything on all others.

  Thank you.

  In General, the Pix must inspect any protocol passes through it accepts for TCP and UDP. The exception is a protocol which is managed by a '' correction '' like PPTP which has a correction to allow GRE (Protocol 47) traffic that results.

  If you want a different protocol than UDP/TCP to be allowed to get THROUGH, you almost create an ACL entry for her.

  The other exception is the traffic to the Pix itself as host. ACL have absolutely no effect on the traffic to the Pix as the host. For example, the packets OSPF intended for the Pix when running OSPF. Or packages ESP for the Pix for a VPN tunnel, it stops. Or ICMP traffic to the Pix itself (controlled using the command [icmp]). ACL don't apply to transit traffic.

• How to manage the lines multiple region table OFA

  Hi gurus,

  I'm new to the development of new Pages of the OFA. Please help me how to manage multiple lines in the table region OAF.

  My requirement I'm not able to manage multiple lines in my area of Table.

  First row in my table area I am selected date_start and date_end when I select the end_date I need I need difference bet ween dates.

  My problem is I am able to manage the first Table line but I am not able to manage the table still ranks when I fire that time I first get the rank only.

  POS:

  14/08/12 07:59:40 1

  14/08/12 07:59:40 inside

  14/08/12 07:59:40 date difference is 86400000

  14/08/12 07:59:40 date difference is 1

  14/08/12 07:59:40 date is less than 365

  14/08/12 07:59:57 1

  14/08/12 07:59:57 inside

  14/08/12 07:59:57 date difference is 86400000

  14/08/12 07:59:57 date difference is 1

  14/08/12 07:59:57 date is less than 365

  14/08/12 08:00:13 1

  14/08/12-08:00:13 inside

  14/08/12 08:00:13 date difference is 86400000

  14/08/12 08:00:13 date difference is 1

  14/08/12 08:00:13 date is less than 365

  My custom logic:

  	If (DutDetSEndDat".equals (pageContext.getParameter (EVENT_PARAM))) {" "}
  	DateDiff (pageContext, webBean);
  //	Am = XxDutyTravelAMImpl
  //	(XxDutyTravelAMImpl) pageContext.getApplicationModule (webBean);
  	OAViewObject = oaviewobject1
  	(OAViewObject) am.findViewObject ("XxDutyTravelDuDetEOVO1");

  	System.out.println("1");
  	If (oaviewobject1! = null) {}
  	System.out.println ("Inside");
  	oaviewobject1. Reset(); New line added
  	oaviewobject1. Next(); new line added
  	Line OARow = (OARow) oaviewobject1.getCurrentRow ();

  Date sDate = (Date) row.getAttribute ("DutdetStartDate");

  	Date = eDate (Date) row.getAttribute ("DutdetEndDate");
  	java.util.Date VChangeDateTime =
  	new java.util.Date (sDate.timestampValue () .getTime ());

  	If (sDate! = null & & eDate! = null) {}
  	long m1 = sDate.timestampValue () .getTime ();
  	long m2 = eDate.timestampValue () .getTime ();

  	long diff = m2 - m1;
  	System.out.println ("difference in date is" + diff);
  	int diffDays = Math.round (diff / (24 * 60 * 60 * 1000));
  	System.out.println ("difference in date is" + diffDays);
  	If {(diffDays > 365)
  	System.out.println ("Date is greater than 365");
  	} else {}
  	System.out.println ("Date is less than 365");
  	}
  	}
  	}
  	}

  Kind regards

  Srinivas

  Hi Srini,

  To get the event line descriptor that shot please use code below.

  If (DutDetSEndDat".equals (pageContext.getParameter (EVENT_PARAM))) {" "}
  DateDiff (pageContext, webBean);
  Am = XxDutyTravelAMImpl
  (XxDutyTravelAMImpl) pageContext.getApplicationModule (webBean);

  String rowRef = pageContext.getParameter (OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
  OARow line = (OARow) am.findRowByRef (rowRef);

  Date sDate = (Date) row.getAttribute ("DutdetStartDate");

  Date = eDate (Date) row.getAttribute ("DutdetEndDate");
  java.util.Date VChangeDateTime =
  new java.util.Date (sDate.timestampValue () .getTime ());

  If (sDate! = null & eDate! = null) {}
  long m1 = sDate.timestampValue () .getTime ();
  long m2 = eDate.timestampValue () .getTime ();

  long diff = m2 - m1;
  System.out.println ("difference in date is" + diff);
  int diffDays = Math.round (diff / (24 * 60 * 60 * 1000));
  System.out.println ("difference in date is" + diffDays);
  If {(diffDays > 365)
  System.out.println ("Date is greater than 365");
  } else {}
  System.out.println ("Date is less than 365");
  }
  }
         
  }

  Thank you

  Vlaminck