How to manually extend the DHCP lease periods?

Similar Questions

• Matter of time for the DHCP lease

  I have the WRT160N.  Great router, no problems at all.

  I have a double NAT: Modem DSL--> WRT160N--> wireless devices

  DSL modem is on the bridge and router is configured for PPPoE.  Works very well.

  in any case, I use the port forwarding for a certain application.  I don't use it all the time; Some days I don't use at all.  I don't need a DD - WRT firmware.  I don't want to even set up a static IP address.  When the computer uses the application that requires a port forwarding, if its IP address has changed, it takes like 2 minutes to change the settings in the router config page.  Yet, it is a little annoying.

  While I don't have to do it all the time, I changed the DHCP lease time, which in the router config page, appears to be called ' Client Lease Time.

  It is located at 5769 now, which is like 3 days or more of what I understand.  I don't know if it's the 'max' or not...

  My is... question can go higher than that?  If so, it would be really handy.

  I updated 7200 = 5 days.

  3 days = 4320.

• Latitude E6510 - how I manually access the Dell system recovery partition?

  Latitude E6510 - how I manually access the Dell system recovery partition?

  Hi all

  My Dell Latitude E6510 came with OEM Win 7 Pro x 64 installed. I am trying to perform a restore of the system to the factory setting.

  I tried to access advanced without result Boot Options and pressing F12 during the boot process does not provide me with the option to repair and select the recovery partition, as if it is invisible. If I use the computer management > storage I do not see the hidden partition or if I do Diskpart it is listed.

  How the BIOS or the system recognize it to boot from the recovery partition? Thanks in advance.

  

  

  Thanks for your reply but it appears not the solution you provided helped and I think you are incorrect since my original screenshot has allowed me to see the hidden partition, but I didn't know how to access it.

  I got access once I used the app "diskpart" with commands like 'list readers', 'list volume' and 'assign volumes"to access the partition of the content.

  Nevertheless, I have found that my recovery media is missing or damaged.

• This sucker is fast. How can I extend the time, the bios displays the initial startup screen?

  I sometimes want to fool around with the bios and other items in the first startup screen, but it does not display still long enough for me to recognize the function related to the options keys.

  How can I extend the time that is displayed?

  Please to identify your computer.

  Ook from Lto the base/back/side of the pc/laptop to the sticker with barcode.

  Item number of pole 2 as seen on the following example of label with barcode of a HP laptop. The barcode on your HP product may be slightly different in appearance, but will still have important information necessary for us to help you.

  #Don't post not the serial number, as it is personal information. ###
  
  Display the version of the operating system installed (and whether 32 or 64 bit) and if the CPU as a product AMD or Intel

  Not showing information as requested will delay our responses and troubleshooting slow the question that led you to create a thread.

  Normally the F10 is the key used to enter the BIOS of a PC HP. Begin to type the F10 key as soon as your press the power button

  Best regards

  ERICO

• How you can extend the SX80 SpeakerTrak 60 codec?

  Hello

  How you can extend the SX80 SpeakerTrak 60 codec? I want to rack mount the codec but saw nowhere a how far the codec can be the 60 SpeakerTrak. Especially concerned about the HDMI cables on both cameras.

  Thanks in advance.

  Mark

  If you use only cables HDMI, we managed to stretch the cameras at 15 metres with a quality cable.  If you use HDMI--> externders Twisted Pair, you can get much larger distances (and different Extenders give you differring distances, but are usually around the mark of 50 m for full HD).  We do it with success in a number of our rooms.

  Of course, as is controlled by Ethernet, the usual limit of 100 meters applies to that as a Cat6 cable length "' copper pure, but you can go away with fiber or with additional active equipment if you really must.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• How to manually change the ports for HTTP on the server vCenter Server

  Hello Experts,

  We have Windows Server 2008 SP2 machine where we v5.1 installed with other SSO components, inventory services, vCenter Server and Update Manager.

  So we went from SSO, the inventory services and vCenter Server fine however, vCenter Server has stopped working. While we were to modernize SSO, the service could not start after the upgrade and the recd suite error "Service VMware KDC service could start.". So, we found the article on the VMware site that said port 88 to cause the problem. To find out more by using the netstat command, we found vpxd.exe used port 88. That is why, we stopped this service and proceeded to the upgrade of the SSO. The upgrade is complete following the inventory service and vCenter Server. While we were upgrading vCenter Server, we found that port 88 was used for HTTP communication.

  So we wasted on the use of the port. The upgrade has been completed successfully, however, we can not connect to vCenter server using vSphere Client version 5.1 or 5.5. We even tried to start the VMware VirtualCenter server using the services.msc console and it failed.

  So we assume the port changes happened during upgrade of the SSO meets the HTTP port by vCenter server usage. We need help on how to manually change the ports for HTTP on the vCenter server.

  Suggestions forward. This problem is with the production servers.

  Thank you

  Karan

  This has been resolved... port has been changed manually and works very well.

• Can I create an action to move the last page to the first?  I can only find how to manually drag the pages, and I need to make it simpler when there are a lot of pages.

  Can I create an action to move the last page to the first?  I can only find how to manually drag the pages, and I need to make it simpler when there are a lot of pages.

  Yes, you can do it using a script. This code should do the trick:

  this.movePage (this.numPages - 1, -1);

• How to manually change the catalog has / B and invalidate the cache of formhandler

  Hello
  
  How to manually change the catalog has / B, as when doing JIU there are active or not active catalog, a catalog of make us changes and deploy the project, it will automatically do that.
  
  I want to do the same to my formhandler, I was wondering how should I do? There should be a manager class that will handle this, I want to know what call class.method and other changes needed to be made.
  
  Thanks in advance

  FormHandler appeal:

  void switchDS() {}
  SDS SwitchingDataSource is getProductCatalog () .getDataSource ();.
  sds.prepareSwitch ();
  sds.performSwitch ();
  getProductCatalog () .invalidateCache ();

  }

  Peace
  Shaik

• How to manually configure the IP, subnet, gateway on the new NIC in ESX Server 3.5

  Hello, first let me say that I am relatively new on ESX Server and so the question I ask here may seem trivial but I looked through the documentation and other threads and that you have not found quite what I'm looking for.

  I have an ESX Server 3.5 with a number of production virtual machines running works very well.  I need to install a second NETWORK adapter because my use of the network will go through the roof, once I convert a production server used in a virtual machine on this machine.  I have a server Dell PE 2950 and I bought an Intel Pro/1000 PT dual port PCI-e adapter that is on the list of hardware supported.  In the reading I did, every reason to believe that when I set up the server, the new network cards will appear in the VIC where I can assign to a new Vswitch and so forth, so I get it.  What I don't see in the VIC is a way to specify the NETWORK adapter settings.

  The problem is that the switch I connect to, put in place by our network management staff, will not be DHCP settings of NETWORK card for me, I have to manually configure the IP, subnet and gateway until I can start talking.  When I initially installed ESX, I was able to provide all parameters of NETWORK card installation - which is not the case now with the new NETWORK card and the operating system all this up and running.  How do I do this?  Thanks for any help.

  ... BillH

  Adding another physical NETWORK card to your vSwitch will make this new Teddy to comply with policies of vSwitch.  In particular, the load balancing algorithm will determine how the additional bears will get used.  By default, this is done with switch port ID.  This means that each vm NIC that feeds, will choose the next available bear to talk about.  The virtual NIC will essentially be Robin and choose the next Teddy online to talk it through and will so remain like that until a failure condition occurs, or the virtual machine is restarted.

  If you know a particular VM is a high user of I/O, and you want to separate its traffic from the rest of your virtual machine, and then create a new portgroup on vSwitch0, assign this new portgroup 3rd Teddy and use the other two as before.  In addition, in your regular exchanges, remove or make sleep 3rd Teddy.  In this way you completely isolate the heavy vm from the rest of your systems.

  -KjB

  VMware vExpert 2009

• Satellite C660: How can I extend the life of the battery of the laptop?

  Hello world

  I will be grateful if someone can help me answer my question, how do I extend my battery life... I don't want to say how many hours it can operate my laptop, but I mean to last for many years without change in its performance.

  Some of my friends told me to remove the battery so I use alternating current, in fact I heard a lot of discussions on this subject and I really need a specific answer.

  Thank you

  Hello

  You use your laptop most of the time to battery power?

  95% of the time of work, I use my laptop on the power supply. To be honest I have never removed battery and battery operation is still almost 2 hours.
  I use from time to time for computer laptop battery power. I leave the laptop running until the battery is almost empty. What you want to do?

  By the way: what model of laptop do you have?

• How to manually change the DNS zone files?

  I'm running OS X version 10.11.2 (El Capitan) and using App Server version 5.0.15 on a Mac Mini.

  I need to change the DNS Zone files manually because the DNS Server App Manager does not provide a U / I in order to add some elements (such as adding a delegation, etc.).  I use TextWrangler (5.0.2) as editor-in-Chief.

  I found an old post on how to do this here, but the information listed it seems obsolete.

  I was able to find the zone files to:

  / Library/server/name

  as:

  CBI .

  When I try to save or overwrite the db. files, or try to save all the files in that directory, I get an error indicating that:

  "Save the authenticated for this file failed (error application code: 20004).

  Since a window Terminal, if I go to that directory and type:

  Echo hello > temp.txt

  I get:

  Permission denied

  I am logged in using an administrator account.

  Before editing the db. files, I turned off the DNS in the App Server, then exit the server application server.

  What should I do to manually update the db. files?

  These files are protected from root.  You need to elevate your permissions to be able to change them.

  Probably you use a text editor like vi, nano or pico command line.  sudo vi/path/to/file for example.

  Back up the files first to protect against error.  In addition, be aware that Apple can run on some of your changes if you change the.app areas.

  Reid

  Apple Consultants Network

  Author of "El Capitan Server" - Foundation Services: available exclusively in Apple iBooks Store

  Author of "El Capitan Server - Collaboration & control": available exclusively in Apple iBooks Store

  Author of books of Yosemite server and server Mavericks

• How can I extend the warranty of my phone online?

  Hello

  I would like to know how to extend the warranty on my phone online? My PC model: Compaq 620 Energy Star, product no.-XP866PA, country-India. Unable to get all the details on the site. My 1 year warranty expires the 10th of this month & I want to get a 2-year extended warranty plan.

  Help, please!

  Hello

  Click on the link below:

  Total Care for your HP laptop

• How to manually start the FSX helicopter?

  I wonder if you folks can help understand me how 'manually start"the engine of the helicopter? There are a few nice start wav files in the sound folder, so it seems to me that they intended to allow us to start the engine of more realistically than the method "instant on" using CTRL + E. But I can't figure out what keys that will allow more realistic start? Using CTRL + E never plays the sound file to start more realistic which is there.

  I tried to use J then the + key but that just zoomed in when you use the external view F11.

  Hello
   
  I suggest you post this question in the forum games for windows .

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• routers that will keep the dhcp leases in the flash memory?

  If a router is turned off, it will keep its current list of active DHCP leases? Is there any router that will do it?

  Sometimes when the internet is slow, my users will unplug the router/modem, but this results in IP address conflicts when new computers Gets a new IP address, but the router begins to give IP addresses since the beginning of the range that are already in use.

  I know not all router consumer who would do this. Memory is rare on these routers and after a reboot, anything not absolutely necessary gets scrapped.

  Your problem sounds more like a firmware bug or a problem of computers. By default, the DHCP server must check the availability of any IP address before sending a DHCP offer. He might try to resolve the IP through ARP or do an ICMP ping. Maybe the firewall on the computers block these packages. Or the DHCP server complies at all (that I consider a bug in the firmware).

  What exactly needs to be verified with a sniffer network on a computer connected to the network. That should reveal if the router sends something to the DHCP offer or not...

• How do I pair the mobile phone LG rumor 2 for Vista laptop, or how to manually enter the pairing code

  Hello.

  When I try to pair my phone to my laptop, it appears in the add menu.  When I click on it, a window will appear that has a code on it and told me to check the code on the device is the same.  No code appears on my phone.

  How can I manually enter the code?  In my opinion, I know, but no option appears to allow me to enter.

  I tried all the step using the dialog boxes.

  Thank you!

  Hello

  Please use the Windows Vista answers Forum.

  The Bluetooth device you want to pair must be in mode so that it shows the pairing pairing code.

  Consult the owner's manual for the device you want to use to find detailed instructions on how to place the unit in pairing mode.

  1. with the handset closed, press the button on the keyboard to access the main menu. Once inside the menu screen, select the menu "Tools".

  2 on the Tools menu, select the Bluetooth menu and press OK on the possibility of "pair with hands-free."

  3. the handset will start searching for the Bluetooth device. Once found, it will fill in the list of devices. Press OK on the keypad to associate the device.

  4. once the device PIN / access code has been entered (as applicable), the pairing process will be completed. Leave the menu screens and you will be able to start using your Bluetooth device.

  NOTE: A command prompt can display request a PIN of 4-16 (usually 0 0 0 0). If this prompt is displayed, see the owner's manual for the device for use with the handset to determine the AXIS / Pass code

  You can check the link below:

  http://lgknowledgebase.com/kb/index.php?view=entry&EntryID=6264

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.