How to manually reorder the files in a folder under Windows7 professional
I'm unable to manually rearrange the image files in a folder. I want to transfer the photos and the order in which they appear is important.
It is also necessary when you set up slide show presentations.
HOW is it possible in Windows 7?
This change in Windows 7 is apparently normal (we are stuck with this change, until Microsoft it reverses or provides an option of sense). You can see the response from Microsoft support here. I hope this helps.
If you find my answer was what you're looking for, remember to click on the link "Propose as answer" below.
Tags: Windows
Similar Questions
-
How to print all the files in a folder without having to open each one?
Hello
Can someone tell me how to print all the files in a folder? I often need to print multiple files in a folder and it would allow me to save a lot of time!
Thank you!
I've done some testing, and it seems that Windows 7 allows print several files when they are all the same type of file. So, for example, you can select and print 15 Word documents, but not a Word document and a single PDF document.
To work around this limitation, you can print each file type separately. For example, to print PDF files in a folder:
- Type *. PDF in the search for top-right box.
- For 1-15 files, press on CTRL + A to select all the.
- For 16 or more files, select 15 of them (click on the first, SHIFT + click the last).
- Click any file, and then click print .
- Repeat steps 3 and 4 as needed.
-
How can I select the files in a folder with the help of a list with the files you want and after that rename only the files using another list with desired new names?
I have only:D: / images (where are necessary + not need files)-a list with only the necessary files-a list with new names for the files neededThank you.Hi Pustiu,
Thanks for posting in the Microsoft Community.
You want to know how to select the files in a folder using a list with the files you want and after that rename only the files using another list with desired new names.
I would have you post your query in the TechNet forums because it caters to an audience of it professionals.
Your query will be better addressed there.
Check out the link-
http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads
We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.
Thank you.
-
How to manually register the file lvm
Hi everyone, I have been using this forum for a while, but so far have never had a question, I couldn't find an answer to.
My question is, how can I do to save my data to a file of lvm manually so that it can be correctly read by labview?
I looked through this guide and have tried to format my file correctly. However, I can't make it work, I always get this error when I try to play the file.
"Error 100: file contains erroneous data." It is normally a user data file. »
If I copy and paste the header of a file works, the file can be read, then the header is the problem.
My head is as follows:
LabVIEW measurement
Test description VI
Writer_Version 2
Decimal_Separator.
Absolute Time_Pref
The operator user
Date 24/01/2014
Time 12:03:14.2892
End_of_Header *.
Start_Special *.
Micro S/N: ABCDEF00
Radial accelerometer S/N: ABCDEF00
Axial accelerometer S/N: ABCDEF00
Tangential accelerometer S/N: ABCDEF00
S/N: ABCDEF00 pressure sensor
End_Special *.
Channels 6
Samples of 12500 12500 12500 12500 12500 12500
Date 24/01/2014 2014/01/2014 24/01/2014 24/01/2014 24/01/2014 24/01/24
Time 12:03:14.2892 12:03:14.2892 12:03:14.2892 12:03:14.2892 12:03:14.2892 12:03:14.2892
Y_Dimension Volts
Y_Unit_Label Volts Volts Volts Volts Volts Volts
Delta_X 0.00002 0.00002 0.00002-0.00002 0.00002-0.00002
End_of_Header *.
Anyone know where I could go wrong?
Cam
Hi GerdW,
Thank you so you would think that the backslash, formatting codes appear on the FormatIntoString help page.
It turns out that I had missed the ' X 0' line of the original header, adding that, as well as using FormatIntoString solved my problem and made my files readable lvm.»
See you soon,.
Cam
-
How one manually associate the file with an application types?
I recently installed the Adobe Digital Editions software to download an e-book I bought. It will not open in ADE, and the manual of the ADE advises me to "manually associate the" types with the application of the EPUB files and the subsidies agreement. 'See the instructions for your operating system for associating file types'. I can't find the instructions for it anywhere. HELP, please.
Support cat either does not!
Click context (right click) on the file and the menu should give you one option 'Open with' - at the end of which is 'Other' - which should allow you to engage in the type of file you want
-
How to copy all the files from one folder to another?
Hi all
I use this code but the files are not copied.
sourceFolder var = new Folder("/Users/admin5/Desktop/Fonts");
targetFolder var = new Folder("/Users/admin5/Desktop/123/");
myFiles = sourceFolder.getFiles ();
for (var i = 0; i < myFiles.length; i ++)
{
Alert (myfiles [i]);var myFile2 = new queue (myFiles [i]); Alert (myFile2.fsName);
If (myFile2.copy (targetFolder))
{
Alert ("Yes");
}on the other
{
Alert ("no");
}}
var MYF = Folder("/Users/admin5/Desktop/Fonts");
If (myf! = null)
{
var myfile = myf.getFiles ("*. *");
var filename = myf.name;
for (var i = 0; i)<>
{
var sourcePath = File("/Users/admin5/Desktop/Fonts/"+myFiles[i].name);
var targetPath = File("/Users/admin5/Desktop/123/"+myfile[i].name);
sourcePath.copy (targetPath);
}
}
-
How to manually activate the file Data Execution Prevention?
When using the Microsoft Fix it Center it could not activate my data execution prevention. How to solve this?
Hi dear Lowe,Here are some articles that you might find useful: -
Windows 7 Ultimate: Explorer is not refreshed after deleting a file, the deleted file still appears in the window, on the manual "Refresh" the file is deleted.
I have also changed the CLASSID HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\ {BDEADE7F-C265-11D0-BCED-00A0C90AB50F} / instance DontRefresh value to 0
Hello
(1) have you made changes before the start of this issue?
(2) what happens when you try to start in safe mode?
To start your computer in safe mode, you can see the link below:
http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx
I suggest you to place the computer in a clean boot state and check if the problem is resolved:
1. sign the computer by using an account with administrator rights.
2. click on Start, type msconfig.exe in the Start Search box and press ENTER to start The System Configuration utility. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
3. on the general tab, click Selective startup, and then click on to clear the load startup items check box. (The check box use the file Boot is not available.)
4. on the Services tab, click to select the hide all Microsoft services check box, and then all disable.
5. click OKand then click restart.
6. check if you still have the problem.
See the link below for more details:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
Reset the computer to start as usual after you have finished troubleshooting, follow these steps to reset the computer to start as usual:
Click Start , type msconfig.exe in the Start Search box and press ENTER.
1. If you are prompted for an administrator password or for confirmation, type your password or click on continue.
2. on the general tab, click the Normal startup option, and then click OK.
3. When you are prompted to restart the computer, click restart.
If this does not work, try to run a SFC scan. To do a SFC scan follow the steps below:
Use the System File Checker tool, which is also called scan SFC.
File system (CFS) auditor verifies that all Vista system files are where they should be as they are by default and not corrupted, changed or damaged.
1. click on Start, click principally made programs, Accessories, right-click on command promptand select Run as Administrator.
2. click on continue or provide administrator credentials if prompted.
3. in the command prompt window , type the following, and then press ENTER:
sfc/scannow
4. you should see messages on the screen the following:
From the analysis of the system. This process will take time.
Start of the phase of verification of the scanning system.
% Of verification complete.
5. once scanning is complete, check to see if the problem you are experiencing is resolved or not.
Hope the helps of information.
-
I have a yellow triangle with a 1 in it, but no other information that the program opens. How can I find the file?
I suggest that you only contact Snagit for assistance with this error.
http://support.softwarecasa.com/kb/browse/000938Thank you
-
How to view all the files on my computer from big to small
Hello
could someone tell me how to view all the files on my computer from big to small
There should be thousands of them. music movies photos the entire batch.
THX
Hello
I suggest that you sort files by size and check if that helps.
Reference:
Behavior and change folder views
http://Windows.Microsoft.com/en-us/Windows-Vista/change-folder-views-and-behavior
Work with files and folders
http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-files-and-folders
Demo: Working with files and folders
http://Windows.Microsoft.com/en-us/Windows-Vista/demo-working-with-files-and-folders
Let us know if it helps.
-
I want to get a file on my hard drive of the cRIO to my host PC. I did it by using the FTP Get file vi. After you save this file in my host PC, I want to delete the file on the cRIO. Is there a direct way to transfer the file to the host PC cRIO or do I have to manually delete the file.
Concerning
Dude
Hello
You must manually delete the file.
Concerning
Visuman
-
The temporary internet files folder does not show all the files in this folder property while is more than 1 GB. How to delete temporary internet files. ? Disk space is very low around 1 & half GB. Please someone help resolve this issue. I am looking for the solution, but it did not have a specific.
Thank you best regards &.
Atul Zade.
CCleaner is very useful to get rid of temporary files, you can get it here: http://www.piriform.com/ccleaner you can use it to clean your temporary files, but DO NOT use registry cleaning works, registry cleaning is mainly a useless effort that can cause more harm than good.
John
-
How can we decompressed the files compressed in disk cleanup? (Windows XP, SP3)? I would like to do at once and not having to open each file, one at a time.
Hi Johnm1938,
Disk Cleanup tool detects removes the old compresses files unused for some specified duration and there is no way to decompress these files.
You can use the method mentioned in the article for the unzip compressed on the computer.
The use of the Compression of files in Windows XP
-
How can I print a copy of the files in a folder - not each file - just the list
original title: list of print files
How can I print a copy of the files in a folder - not each file - just the list? List of cases of printing
How can I print a copy of the files in a folder - not each file - just the list?
Karen's directory printer (free)
-
How can I recover the files and programs before a system restore? my document folders are all empty and my programs will not open!
I know they are there and hidden somewhere, but this restoration took my settings of the computer to 2004! We lost all our data, our software that we use to operate our company at home, our quickbooks that has all our financial data, family photos, videos, Outlook will work not so no e-mail, all turned in time and 6 years ' worth of documents have disappeared.
What happeneded was that I was trying to upgrade to quickbooks software when I got an error, I cancelled out of the facility, then restarted and that's when I got an error hal.dll something? I thought about a system restore would allow me to go back in time to just before when the error occurred, but he basically took my computer back to factory settings, so all the programs that I installed and paid hundreds of dollars for the past six years has disappeared, Microsoft Office and very expensive construction estimating software that we wil have to pay once AGAIN for If I can't get this program working properly.
I am a fool! I can't believe what's happening.
Someone at - it instructions on how I can retrieve either the programs and data that I need specifically or how to go and seek shade from the files I read online on and restore my computer for about 12 hours ago?
Thank you all!
Sally in Georgia
Looks like you did a system rather than a system restore recovery. If you have inserted a disc supplied with your machine and booted from it, you probably erased the disc and installed the original operating system provided with your computer. Usually, a step in this recovery is to do a full format or quick of your drive. If you did a full format, your data is permanently lost. With a quick format, your data may still be there, somewhere but inaccessible by normal means. Applications must generally be installed, in order to recover the files probably will not help unless you have the original installation media. Your other data files (images, videos, financial data) may be salvageable, but at this point, it would be advisable to take your computer or your disk to a business/professional who is experienced with data disc recovery. It will be cheap and there is no guarantee.
Impatient, remember investigate you a backup strategy for your computer and critical data. Hard drives can go wrong with little or no warning.
HTH,
JW
Maybe you are looking for
-
Help: Autofill numbers in drop-down list to another table
Hello world Does anyone know how to automatically fill in a table of the value of the other table, based on the selected menu drop-down on the main table. As you can see on my pictures, my main table, I have a drop down list, so I have to be able to
-
HP Officejet 4620: HP Officejet 4620 only ink red print documents computer
Hello I'm connected wireless to my printer HP Officejet 4620. I use the XP operating system (I know very dated) I am trying to print Word documents and they are just an impression in red ink. When I try to run "Clean printhead" function black ink pri
-
Hello How can I know that triggered external DIO out of finite samples have completed execution? I see there is a 'DAQmx is task performed?', but it means that I have to constantly monitor the task. Is there a way to generate an event or declaring th
-
Low disk space on the Windows XP computer.
Original title: clean C disk, compress files. I'm low disk space and need to Defrag. When I clean disc - the same 2-,-is still there. No matter what I do, I always only 7.1% of free space on my C drive. How can I get more space?
-
Hello Devs His first question as im a newbie asks BlackBerry waterfall... I have a site HTML5 (reactivity), I created a native application of cascade to preview the site using WebView method, as you can see below Page { ScrollView { id: scrollView sc