How to match the 2 points for follow-up?

Hello

How can I match points followed by two different objects. I would like to correspond to the movements.

(Basically, I have 2 slow travel shots along a window, each with different lighting. I would like to match the two windows...)

Thanks in advance,
René

That's how I would try to pull this: basically stabilize you the motion, adjust the window handles and layers to exactly match A shooting more than hit B by manually adjusting for the property position and time-remapping keyframes, then re - introduce the request

SHOOTING A - the hidden underexposed

B - the overexposed shot

1. place the shot b. shooting above cut only the time and place as accurately as possible

2. stabilize the movement at A glance and apply to the layer

3. stabilize the motion Shot b and apply to the layer

4 use the difference mode to place exactly layers one over the other.

Now you have a model with the two shot of stabilized and the window is exactly in the same place.

5. create a solid capture A above and set it as a cache alpha - mask for your window.

6. for turned a set a keyframe for the position and the effect of time remapping in the boot image. Make sure that the window is exactly in the same position, and layer handles are exactly on top of the other.

7. go to the end of the shooting and align the window again and set a keyframe for TR a Position

8. carefully examine the shooting through and make images more if necessary keys. the little the better.

in the end, it should look something like this:

9 re - introduce the request by attaching the two shots to a null value with the data of monitoring of plan B (you already have the tracking data, simply change the type of track to transform and apply it to a null)

you could probably get a way without stages 6 to 8, if there wasn't any change of parallax.

Tags: After Effects

Similar Questions

  • HP pavilion 15-e034tx: how to choose the right RAM for laptop

    How to choose the right RAM for my laptop (Pavilion 15-e034tx). I know I should buy DDR3 ram.

    Are there other factors should I consider when buying one? I got 2 slots for ram, which od these combos are possible?

    1-4 + 4 GB
    2-4 GB + 8 GB
    3-8 GB + 8 GB

    Thank you

    From the Manual:

    Two customer accessible/upgradable memory module slots

    Support for dual channel DDR3L (1600 MHz)

    Support 8192 MB RAM system in the following configurations:

    8192 MB (8192 MB × 1, × 4096 MB 2)

    Manual download link

    See page 53 for instructions. Memory access is easy via the service Panel. This is the part number for the approved 4 HP concert module:

    4 GB (PC3L, 12800, 1600 MHz) 691740-001

    http://www.Amazon.com/HP-691740-001-4GB-1600MHz-PC3L-12800/DP/B00CI08FX4/ref=sr_1_2?ie=UTF8 & qid = 1451655870 & SR = 8-2 & Keywords = 691740-001

    A 8 GB module is listed in the manual, and it's a 3rd generation of processor i5 I suspect 2 x 8 = 16 concerts would work, but strictly following the manual your only option is to add a 4 GB for a total of 8. Most users really not more 8 GB and adding a second identical module will allow two-channel operation, so you should see a noticeable jump in the overall performance.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • HOW TO MOVE THE FLAG POINT MAP, MIRCOSOFT 2013

    HOW TO MOVE THE FLAG POINT MAP, MIRCOSOFT 2013

    Hello

    It is not a Community Forum for MapPoint.

    Ask here

    Highway, Streets & Trips, MapPoint Forum:
    http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

    Other Support options (not free)

    Support for MapPoint, streets & trips and Highway:
    http://support.Microsoft.com/ph/851

    Don

  • Windows Movie Maker-how to match the length of the video and audio

    Windows Movie Maker

    Hi, I've used Windows Movie Maker 6.0 and windows vista.  I do a sort of slide show with pictures and music.  How to match the duration of the video to audio.  Right now my audio file is longer than my video.

    Hi, I've used Windows Movie Maker 6.0 and windows vista.  I do a sort of slide show with pictures and music.  How to match the duration of the video to audio.  Right now my audio file is longer than my video.

    =============================================
    Have you tried to split the Audio file (Ctrl + L) at the end of the video
    and then right-click / Delete the unwanted part?

    Or... to increase the duration of the photos. If you place the cursor on the edge
    a photo on the timeline, you'll see a red double arrow... you can
    Drag the arrow to change the duration. A ToolTip should appear to show
    change.

    BTW... Photo Story 3 is a good software to make video slideshows.

    PhotoStory 3 for Windows
    http://www.Microsoft.com/windowsxp/using/digitalphotography/Photostory/default.mspx
    (works on XP, Vista and Win7)

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • I use a mouse in my Windows 7 laptop. How to disable the touchpad pointing device?

    I always use my mouse to my Windows 7 laptop.  I don't want the touchpad pointing device as my fingers touch when writing and everything spoil.  How to disable the touchpad pointing device? Thank you

    What is the brand and model of your laptop? What version of Windows 7?

    Many laptops have a key that will enable/disable the touchpad - mine is on the top row of keys where the function keys.

    You could also open mouse in Control Panel and look for an option here.

    I hope this helps.

  • I wanted to buy Muse CC 2015, but before that I wanted to check the trial version, so I downloaded the trial version. When I was installing the product at the halfway point for the installation process. an error message will appear saying "need help."

    I wanted to buy Muse CC 2015, but before that I wanted to check the trial version, so I downloaded the trial version. When I was installing the product at the halfway point for the installation process. a pop error message saying "we met the following problems Installer failed to initialize. "Please download Adobe Support Advisor to detect the problem" I click on 'Get Adobe Support Advisor' and then I get here. Can you help me? I use the Mac operating system. I also run Adobe Photoshop CS6 unistall and cleaner, but now when I try to install it again it gives the same message

    Hi Ashish,

    Please follow the solution 2 in the link below.

    Error: "unable to install". Creative cloud office

    After that, you can install the application by following the instructions on the link below.

    Download and install Adobe Creative Cloud apps

    Hope this will solve your problem.

    Kind regards

    Hervé Khare

  • How to find the child level for each table in a relational model?

    Earthlings,

    I need your help, and I know that, "Yes, we can change." Change this thread to a question answered.

    So: How to find the child level for each table in a relational model?

    I have a database of relacional (9.2), all right?
    .
     O /* This is a child who makes N references to each of the follow N parent tables (here: three), and so on. */
    /↑\ Fks
   O"O O" <-- level 2 for first table (circle)
  /↑\ Fks
"o"o"o" <-- level 1 for middle table (circle)
   ↑ Fk
  "º"
    Tips:
    -Each circle represents a table;
    -Red no tables have foreign key
    -the picture on the front line of tree, for example, a level 3, but when 3 becomes N? How is N? That is the question.

    I started to think about the following:

    First of all, I need to know how to take the kids: 
    select distinct child.table_name child
  from all_cons_columns father
  join all_cons_columns child
 using (owner, position)
  join (select child.owner,
               child.constraint_name fk,
               child.table_name child,
               child.r_constraint_name pk,
               father.table_name father
          from all_constraints father, all_constraints child
         where child.r_owner = father.owner
           and child.r_constraint_name = father.constraint_name
           and father.constraint_type in ('P', 'U')
           and child.constraint_type = 'R'
           and child.owner = 'OWNER') aux
 using (owner)
 where child.constraint_name = aux.fk
   and child.table_name = aux.child
   and father.constraint_name = aux.pk
   and father.table_name = aux.father;
    Thought...
    We will share!

    Thanks in advance,
    Philips

    Published by: BluShadow on April 1st, 2011 15:08
    formatting of code and hierarchy for readbility

    Have you looked to see if there is a cycle in the graph of dependence? Is there a table that has a foreign key to B and B has a back of A foreign key?

    SQL> create table my_emp (
  2    emp_id number primary key,
  3    emp_name varchar2(10),
  4    manager_id number
  5  );

Table created.

SQL> ed
Wrote file afiedt.buf

  1  create table my_mgr (
  2    manager_id number primary key,
  3    employee_id number references my_emp( emp_id ),
  4    purchasing_authority number
  5* )
SQL> /

Table created.

SQL> alter table my_emp
  2    add constraint fk_emp_mgr foreign key( manager_id )
  3         references my_mgr( manager_id );

Table altered.

SQL> ed
Wrote file afiedt.buf

  1   select level lvl,
  2          child_table_name,
  3          sys_connect_by_path( child_table_name, '/' ) path
  4     from (select parent.table_name      parent_table_name,
  5                  parent.constraint_name parent_constraint_name,
  6                  child.table_name        child_table_name,
  7                  child.constraint_name   child_constraint_name
  8             from user_constraints parent,
  9                  user_constraints child
 10            where child.constraint_type = 'R'
 11              and parent.constraint_type = 'P'
 12              and child.r_constraint_name = parent.constraint_name
 13           union all
 14           select null,
 15                  null,
 16                  table_name,
 17                  constraint_name
 18             from user_constraints
 19            where constraint_type = 'P')
 20    start with child_table_name = 'MY_EMP'
 21*  connect by prior child_table_name = parent_table_name
SQL> /
ERROR:
ORA-01436: CONNECT BY loop in user data

    If you have a cycle, you have some problems.

    (1) it is a NOCYCLE keyword does not cause the error, but that probably requires an Oracle version which is not so far off support. I don't think it was available at the time 9.2 but I don't have anything old enough to test on

    SQL> ed
Wrote file afiedt.buf

  1   select level lvl,
  2          child_table_name,
  3          sys_connect_by_path( child_table_name, '/' ) path
  4     from (select parent.table_name      parent_table_name,
  5                  parent.constraint_name parent_constraint_name,
  6                  child.table_name        child_table_name,
  7                  child.constraint_name   child_constraint_name
  8             from user_constraints parent,
  9                  user_constraints child
 10            where child.constraint_type = 'R'
 11              and parent.constraint_type = 'P'
 12              and child.r_constraint_name = parent.constraint_name
 13           union all
 14           select null,
 15                  null,
 16                  table_name,
 17                  constraint_name
 18             from user_constraints
 19            where constraint_type = 'P')
 20    start with child_table_name = 'MY_EMP'
 21*  connect by nocycle prior child_table_name = parent_table_name
SQL> /

       LVL CHILD_TABLE_NAME               PATH
---------- ------------------------------ --------------------
         1 MY_EMP                         /MY_EMP
         2 MY_MGR                         /MY_EMP/MY_MGR
         1 MY_EMP                         /MY_EMP
         2 MY_MGR                         /MY_EMP/MY_MGR

    (2) If you try to write on a table and all of its constraints in a file and do it in a valid order, the entire solution is probably wrong. It is impossible, for example, to generate the DDL for MY_EMP and MY_DEPT such as all instructions for a table come first, and all the instructions for the other are generated second. So even if NOCYCLE to avoid the error, you would end up with an invalid DDL script. If that's the problem, I would rethink the approach.

    -Generate the DDL for all tables without constraint
    -Can generate the DDL for all primary key constraints
    -Can generate the DDL for all unique key constraints
    -Can generate the DDL for all foreign key constraints

    This is not solidarity all the DOF for a given in the file object. But the SQL will be radically simpler writing - there will be no need to even look at the dependency graph.

    Justin

  • I made my largest site and how can keep the same size for all other sites?

    I did the 2 larger site and how to keep the same size for all pages when I re - open the web browser?

    You can use an extension to set a page zoom and the size of the default font on the web pages.

  • How to recharge the remote control for Apple TV 4

    How to recharge the remote control for Apple TV 4

    Recharge your Siri or Apple TV Remote - Support Apple Remote

  • Satellite Pro P - how to disable the hot keys for camera assistant?

    Is it possible, and how, to disable the shortcut keys for the camera wizard?

    The default keys interfere with shortcuts of Microsoft Office (Word) - for example Alt + F9 to show/hide codes field to turns on the properties of camera assistant, Alt + 10 screen settings of camera etc.

    I find this very frustrating.

    Hello

    Of course you can turn it off.
    You must remove the software from the camera in msconfig start up.

    So go to start-run-msconfig online online
    Go to the Startup tab and disable the camera software. Restart the computer laptop and that s all!

    Good bye

  • How to get the code produced for my Windows XP disc if I have the drive?

    Acquisition of Product Code Windows XP

    How to get the code produced for my Windows XP disc if I have the drive?  I signed the BONE when I bought it all first, but have no way of knowing if this is the way to receive a copy of the product key.

    Here are some utilities, which will display your product keys:

    Belarc Advisor: http://www.belarc.com/free_download.html
    (He did a good job of providing a wealth of information.
    However may not detect a key to office, then try one of the other two below)

    Also: http://www.nirsoft.net/utils/product_cd_key_viewer.html
    and: http://www.magicaljellybean.com/keyfinder.shtml

    Paid (free demo is available): Recover Keys: http://recover-keys.com/
    "quickly scans your system for more than 3000 + software '.
    and produces a list of software activation keys.

    13 keyfinder programs:
    http://pcsupport.about.com/od/productkeysactivation/TP/topkeyfinder.htm

    J W Stuart: http://www.pagestart.com

  • How to change the default path for documents and settings

    How to change the default path for documents and settings

    I try to change in the registry, but the profile can create but error! had no choice to change the default path % lecteur_systeme % d: /.

    Hello

    I suggest you to download TweakUI, this could help you or get you headed in the right direction
    http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-XP

    Also this KB could help as well:
    http://support.Microsoft.com/kb/236621

    It will be useful.

  • How to change the product key for Office 2007?

    Original title: product key used.

    When I loaded Office 2007 I used a product key with any additional use.  I try to enter a different product key, but impossible to find how to do this.  Can you please direct me to the correct site to do this?  Thank you!

    Hello

    It would be easier to uninstall it and then reinstall it by using the different product key.

  • How to set the time stamp for incoming mail?

    How to set the time stamp for incoming mail?  I have windows vista. I use hotmail/windows live email. My computer has the time is set correctly. My e-mail timestamps incoming messages 7 hours a head of real time. Example: it is now 09:48. A new email is stamped as to settle at 16:48. How can I fix it? Note: the computer is correct.

    Thank you
    Laura
    2.13.2012

    If you mean the customer of email Windows Live Mail, the time stamp on messages is governed by your time zonesystem. Right-click on the clock in the lower right of the screen and select CONFIGURATION... Change your time zone, and then set your clock at the present time.

    If you are talking about the Windows Live Hotmail service, the time zone (s) used are those contained in your account data. Reach
    https://account.live.com/EditProf.aspx
    and change the time zones for the good...

    Windows Live programs and services have their own forums for support at the Windows Live Solution Center. Please address any questions you may have about Windows Live Mail to one of the forums on the right side of this page. For Hotmail, forums and responses are available via this page.

    Noel

  • How to change the highlight color for windows 7 (select the file or folder)?

    How to change the highlight color for windows 7 in the aero theme (select the file or folder)?

    You can change the font size because it is not a widget.   To do this:

    1 type dpi in your Start menu search box, and then choose make text and other more or less important.
    2 - Choose a size you prefer
    3 - Click on apply.

Maybe you are looking for