How to measure the frequency of a clock using meter in LabVIEW?

Hi guys,.

Someone knows how to measure the frequency of a signal introduced in LabVIEW (in the FPGA PXI-7813R), using a counter in LabVIEW?

Essentially, I want to use this counter as a kind of Logic Analyzer.

Thank you, Anoop

I don't know what you mean by "manual".  It is all managed in a housing structure.

Tags: NI Hardware

Similar Questions

  • How to measure the frequency of NOR-DAQmx RPM tasks

    Hello

    I'm trying to measure the frequency using the NI DAQmx task and then convert it to a RPM if possible.

    I have the following material available to me.

    I have a block SCXI-1327 terminal, as well as a 6289 PXI multifunction data acquisition Module SCXI 1126.

    I wired in a mag ai7 sensor on my 1126 and then of the passage of an object metal I get a range of 6-8, so I am able to read the mag sensor.

    What I'm trying to do is somehow convert this analog measurement a RPM using the NI DAQmx task only.

    Any help would be appreciated.

    Hi, smooth,

    Yes, you would select linear, then put in the result of this calculation of the slope.

    The Manual recommends a minimum frequency of at least 15 Hz for setting low range. This card is not really designed to measure the frequency for a single pulse over a long period of time.

    The number of LAPS down (assuming one pulse per turn) that we recommend that you measure with the 1126 is so 900 RPM. If you need measure low revs, and you cannot increase the number of impulses per turn, you could consider either read the signal as an analog waveform, or if it's a digital pulse, using a counter to basic task. In this way, you can use any method you want to handle the situation where there is only a single pulse in a long time.

  • How to measure the frequency of sampling (s/s) in LabView FPGA?

    Hello

    I am trying to find a way to measure the sampling frequency (s/s) during which I read from analog input in LabVIEW FPGA. I know that the sampling frequency is specified in the data sheet of the module HAVE, but I want to measure in LabVIEW.

    Any suggestions?

    A screenshot of the example code would be greatly appreciated

    Hey phg,.

    If you have some time loopand in this loop, you export a sample by iteration of loop via an I/O node. You can't out two samples on the same I/O node within an iteration, it's always one!

    So if your loop takes 1 second to run you have a sampling rate of 1 Hz output. The same goes for sampling of entry. How long your loop takes to run can be calculated as explained above.

    Samplerate [s / s] = 1 / [s] while loop

  • Measure the frequency of the pulses PXI-6624

    Hello.  I work with a PXI-6624 and am interested to make measurements of pulsed frequency for frequency and duty cycle on its inputs using DAQmx.

    When I go to create the virtual channel, however, I have error-200431:

    "Physical channel selected does not support the type of measure required by the virtual channel you create."

    ' Asked the value: pulse frequency.

    «You can select: frequency, period, pulse width, period of Semi, separation of the two edges, Position:...» »

    Is this card really not capable of doing these measures of pulse frequency?

    Yes, the "Pulse" (not to be confused with "Pulse Width") measure was introduced with STC3 of OR including CompactDAQ and X series devices.

    Measuring the pulse:

    However, you should always be able to measure the frequency and the duty cycle on your card with a half measure:

    The half measure:

    The images are in the X Series user manual.

    The difference between these two modes boils down to how the data is stored and implemented in buffer on the map - with the period semi method that the material does not distinguish between high and low samples and puts everything in a single buffer.  However, if you start the meter on the song (see below the node property), then you would know the order of low and high samples in software, and are easy enough to calculate cycle frequency and the duty of this.

    Best regards

  • Satellite 1800-814: how to measure the temperature of the processor?

    I replaced the radiator component on my laptop as it freezes suddenly during the operation. Now everything seems to be better, but still a last question. How to measure the temperature of the processor?

    Dominic displays only HDD temp and MBM profile for 1800-224 display cases and the cpu. But if I can use this profile? Any other ideas how to meausre CPU temp?

    MBM shows me around 40 to 49 ° C for the cpu. Is this normal or too high just to run windows?

    Thanks in advance

    Greetings
    Jens Grieger

    Hello

    See this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=5564&messageID=19417

    Maybe the help!

  • With the help of the meter from 6525 to measure the frequency: is there a more orderly way?

    I am currently using the high speed on a module USB 6525 meter to measure the frequency of an object in rotation via a sensor hall-effect.

    I was wondering if there was a simpler way / more effective this encoding than that?

    Everything that I currently perform the current meter reading, wait a second, take another reading, and subtract one from the other. The result is the frequency in hertz.

    Is there a way to get the 6525 to return the number / change County after 1 second?

    Thank you

    On the 6525, you have a country of the event and you can't make a measure of frequency.

  • How to find the frequency in the cureent network band to blackberry.

    Hello

    How to find the frequency in the cureent network band to blackberry.

    There is no API that exposes this information on a BlackBerry smartphone.

  • How to measure the performance of the sql query?

    Hi Experts,

    How to measure the cost of performance, efficiency and CPU of an sql query?

    What are all the measures available to a sql query?

    How to identify the optimal query writing?

    I use Oracle 9i...

    It'll be useful for me to write the effective query...

    Thanks and greetings

    PSRAM wrote:
    Could you tell me how to activate the PLUSTRACE role?

    First put on when you do a search on PLUSTRACE: http://forums.oracle.com/forums/search.jspa?threadID=&q=plustrace&objID=f75&dateRange=all&numResults=15&rankBy=10001

    Kind regards
    Rob.

  • How to remove the support contact at screenshot using the "home" button

    guys, please help, how to remove the support contact at screenshot using the "home" button? I use 6 s ios 9.2, but when I take screenshot with the menu help key, the help key disappear on my photo, but the problem is, I want to take screenshot with my home button, please help... Thank you

    What turned the problem into a screen with the home button? Quickly, you press the power off button and home together and release - if the sounds are enabled - you should hear the camera shutter sound and have the capture in your app screen shots. The help key is not displayed

  • I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

    I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

    Set a password to disk... disk tab in the utility... and just give to those you want to use the TC...

  • How to read the date and time of a file by labview information

    How to read the date and time of a file by labview information? for example, time created and updated time.

    The similar question had already spoken here (this is the old thread but still seems topical):

    http://forums.NI.com/T5/LabVIEW/file-date-created/TD-p/109836

  • How to print the page on WiFi printer using ideapad a1

    How to print the page on wifi printer using ideapad a1

    Cloud Print (available in the game store) use Google chrome to print from the A1 motorway. You must have Chrome installed on your computer. If not connected to Google (required) or your PC/Mac/Linux computer is turned off, it will be printed when you log-n.

  • How to get the frame number current timeline using jsx?

    How to get the frame number current timeline using jsx?

    Thanks for the link!

    Clarification: I was looking for the current image on the timeline of the video. OP he mentions that he had found how to get that so I searched a bit more and found this thread: Re: can I inpoint in read/write and out-point of the clips in a group of video with scripts? They have the following functions, I have not tried yet, but it seems like it should work.

    function getCurrentFrame() {}

    try {}

    Var ref = new ActionReference();

    ref.putProperty (charIDToTypeID ('Rprp'), stringIDToTypeID ('currentFrame'));

    ref.putClass (stringIDToTypeID ('timeline'));

    var / / desc = new ActionDescriptor();

    desc.putReference (charIDToTypeID ('null'), ref);

    var TC = executeAction (charIDToTypeID ('getd'), desc, DialogModes.NO);

    Return TC.getInteger (stringIDToTypeID ('currentFrame'));

    } catch (e) {return null ;}

    };

  • How to create the MUCOW file in xml using Adobe Muse

    How to create the file MUCOW as xml using Adobe Muse .kindly give step tutorial or PDF... WHERE DO I CREATE MUCOW? No idea for me

    Just lucky to have this info to my favorites

    MuCow Documentation

    Muse Jam Sessions_105_ConfiguringMucows

  • How to automate the process of loading data using load file & Task Scheduler

    Hello

    I do the automated processes to load the data into Hyperion Planning application using the file data_Load.bat & Scheduler of tasks.

    I created Data_Load.bat file, but the rest of the process, I cannot complete.

    Could help you me, how to automate the process of loading data using the file Data_load.bat & task Scheduler or what are the rest of the file is require it to achieve.

    Thank you

    In response to your question using the maxl for loading scripts?

    If Yes, I've seen and deliver in the batch (ex: load_data.bat) that is you do not have the path of the maxl script complete with a batch when passing through the event the task scheduler will work, but the log file and / or error will not be created. Which means lots claims it linked task scheduler, although he did not do what you need to.

    If you use maxl use this as the batch

    "essmsh C:\data\DataLoad.mxl" or you can also use the full path for the maxl or work elsewhere. The only reason why I think that the maxl can then not work is if you do not have the updated batch updated to call on all LANE changes maxl or if you need to update your environment variables to correct the command essmsh to work in a command prompt.

Maybe you are looking for