How to migrate data with the Mavericks (MacBook) Setup Wizard to El capitan (MacBookPro)

Similar Questions

• all my data is all save on the local disk c, how to share the data with the other drive, local drive d.

  all my data records on the local disk c, how to share the data with the other drive, local drive d.

  Hi Jasonbichard,

  1. what type of drive is D? Is - this another partition on the same disk?

  2 Windows operating system you are using?

  You can change the location of the disk to save the data in the d: instead of C: and check if it helps.

  a. navigate to the location (username) C:\Users\.
  b. right click on the folder that you want to change the location, and then select Properties.
  c. click on the location tab and change the location to D: drive.

  d. click on apply and Ok.

• Problems with the new Macbook pro 15' maxed out

  Here's a quick post about my experience so far with the new macbook pro. I just got a brand new fully maxed out in spec macbook pro 15 inch 1 to SSD 16 GB RAM AMD R9 370 m GPU (set to automatic switching is not always) and a 2.8 to 4 GHz i7. I turned on and set it up which was nice and took 2 minutes. Then experience decreased a little when I saw an EST 05:36 hours of battery life remaining to 94%. So I loaded 100% and it is still 60% of battery life announced and no program running that I literally just signed a brand new machine.

  Then I tried to use the migration wizard to import a backup of my iMac 5 k so I can do everything on this clone for my laptop. After having successfully connected (he told me if my password for time machine was incorrect or not) it froze and did nothing, continue did nothing.

  Then place had to call support, was a guy on the phone in 30 seconds and I unplug and restart the machine time, always that same question so I transferred to a guy with "more training". The new guy I could say knew a little more and knew that I knew how to set my password or if I walked in their properly for a bit but they all have been set for the same password just for this. I created a second admin account called "test" under his leadership, and when the migration assist froze on this account, he was surprised and proceeded to transfer me off.

  I preceded to restore fully the machine into thinking that my account setup is causing trouble with the migration assistant, and it turns out that the closure of that laptop it can only continue to 'download additional components', while that connected for 30 minutes so all last night was wasted, and now I guess he's got 5 left 12 hours to download original 'things '. Keep in mind that I can download 5 GB in one hour... After he wake up this morning and ending up where I left it last night :/ he says 84 hours go, now 72 and 51 and it is not updated even once in seconds, it took 20 minutes to 84 minutes to 51, it's literally a day 2 reset extravagance or what? Just to download it I can only imagine the actual plant until I can install my programs.

  The cost of the laptop was about $3600 but paid ~ $2900 after headphones were included and $250 off for delivery to students and other issues on the agenda of the process itself that is not my complaint, what happens, but sitting with a new camera and support useless just to ask me if I can use actually tomorrow at this price are unacceptable.

  I would like to continue using it for a while.

  You can try to reset the SMC http://support.apple.com/kb/ht3964

• backup to external hard drive with the Mavericks El Capitan

  How to back up the El Capitan on the same external hard drive with the Mavericks?

  How Mavericks backup external hard disk?

• How to save data in the text file of Spartan 3

  Hi all

  I would like to kindly save the data table text file or a spreadsheet on vi using fpga spartan 3e as an fpga target. Once I added all the functions related to the operation of file, it gave an error that these functions are not supported by the target device.

  could you please help me with this

  Thank you

  Rania

  Hi David,

  Thank you for posting. You use LabVIEW? If so, what version of LabVIEW FPGA do you use? You use a host VI, or any deployment of code at your target to run? The file IO VI probably won't compile to target because they are not intended to be used on your host computer. Resources and the paths of files do not exist on the target FPGA, but rather on the side of the host. I have included a link below that describes how to transfer data between the FPGA and host. I hope this helps!

  http://zone.NI.com/reference/en-XX/help/371599F-01/lvfpgaconcepts/pfi_data_transfer/

• Connection Officejet 6100 to Wifi with the Mavericks

  I have Mac OS 10.9.2 (Mavericks) and have installed all available updates.  I just bought a HP Officejet 6100.  The configuration software supplied with the printer does not work on the Mavericks.  I can use the printer via USB, but have no idea how to do to connect the printer to my wifi network.  All the instructions I found point using the diskette supplied with the printer (not compatible with the Mavericks) or assume that I already connected the printer to my network wifi (which is the problem that I am trying to solve).

  I had HP products in the past and if it is connected to the network, but it supports WPS and has a touchscreen user interface.  This printer does not seem to be supported.  The wifi light just keeps blinking.

  I don't like on ePrint, etc..  I want just the printer connected to my wifi so I can print from any number of computers on this network.

  Help, please.

  Thank you

  It wasn't very nice, that we were just trying to help.  Don't tell you specifically that your router has WPS.

  On your printer, press and hold the button wireless for 3 seconds.  Within 2 minutes, press the the router WPS button.

  Wait about 2 minutes. If the printer connect successfully, the wireless light will stop blinking but stays on.

  From there, you can connect your printer on your Mac:

  -Go to System Preferences > print & Scan
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• How reslove an error with the dbms_redefinition.start_redef_table command?

  Command:

  BEGIN

  () DBMS_REDEFINITION.start_redef_table

  uname = > "kiku"

  orig_table = > 'pletest3_pn_kiku_api_db ',.

  int_table = > 'pletest4_pn_kiku_api_db');

  END;

  Error:

  Error report:

  ORA-12008: error path refresh materialized view

  ORA-14400: inserted partition key is not mapped with any partition

  ORA-06512: at "SYS." DBMS_REDEFINITION", line 50

  ORA-06512: at "SYS." DBMS_REDEFINITION", line 1343

  ORA-06512: at line 2

  12008 00000 - "error in the path of refresh materialized view.

  * Cause: Table SNAP$ _ < mview_name > reads lines of sight

  MVIEW$ _ < mview_name >, which is a view of the main table

  (the master can be on a remote site).  Any

  error in this way will cause this error when updating.

  For updates of the Rapids, the table < master_owner >. MLOG$ _ < master >

  is also referenced.

  * Action: Examine the other messages on the stack to find the problem.

  See if SNAP objects $ _ < mview_name >, MVIEW$ _ < mview_name >.

  < mowner >. < master > @ < dblink >, < mowner >. MLOG$ _ < master > @ < dblink >

  There is always.

  How reslove an error with the dbms_redefinition.start_redef_table command?

  As I said before, this may be reproduced if the intermediate table is not created correctly.

  SQL> --My database version.
  SQL> ----------------------
  SQL> SELECT * FROM v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE TABLE not_partitioned_tbl AS
    2*  SELECT object_id,object_name,created,owner FROM all_objects
  SQL> /
  
  Table created.
  
  SQL> ALTER TABLE not_partitioned_tbl ADD CONSTRAINT not_partitioned_tbl_pk PRIMARY KEY (object_id);
  
  Table altered.
  
  SQL> CREATE INDEX npt_created ON not_partitioned_tbl(created);
  
  Index created.
  
  SQL> EXECUTE DBMS_STATS.gather_table_stats('SCOTT','NOT_PARTITIONED_TBL',cascade=>true);
  
  PL/SQL procedure successfully completed.
  

  Now, I create the staging table without MAXPARTITION, so not all "created" dates cannot be mapped.

  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE TABLE partitioned_tbl (object_id NUMBER, object_name VARCHAR2(30), created DATE, owner VARCHAR2(30))
    2      PARTITION BY RANGE (created)
    3      (PARTITION pt_2005 VALUES LESS THAN (to_date('01/01/2006','dd/mm/rrrr')),
    4       PARTITION pt_2006 VALUES LESS THAN (to_date('01/01/2007','dd/mm/rrrr')),
    5       PARTITION pt_2007 VALUES LESS THAN (to_date('01/01/2008','dd/mm/rrrr'))
    6      --PARTITION pt_rest VALUES LESS THAN (MAXVALUE) -- Maxpartition  is commented out intentionally.
    7*     )
  SQL> /
  
  Table created.
  
  SQL> EXEC DBMS_REDEFINITION.can_redef_table('SCOTT','NOT_PARTITIONED_TBL');
  
  PL/SQL procedure successfully completed.
  
  SQL> conn sys as sysdba
  Enter password:
  Connected.
  SQL> ed
  Wrote file afiedt.buf
  
    1  BEGIN
    2     DBMS_REDEFINITION.start_redef_table('SCOTT','NOT_PARTITIONED_TBL','PARTITIONED_TBL');
    3* END;
  SQL> /
  BEGIN
  *
  ERROR at line 1:
  ORA-12008: error in materialized view refresh path
  ORA-14400: inserted partition key does not map to any partition
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 52
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 1646
  ORA-06512: at line 2
  
  SQL>
  

• How to migrate data from a source to multiple targets (tables)?

  How to migrate data from a source to multiple targets (tables)? Describe the General steps, please or point me to a tutorial

  Yes, a table in a mapping element can be source and target at the same time (i.e. a target can be reused as a source for the rest of the map on the right side of the table).

  Don't forget to check the order of loading (in the property map), to ensure that the reused as source is loaded before the final table target table.

  I tested it and it works. However, the documentation is not said in the link I gave you above:

  "Each element of data store that has entries but no exits in the logical diagram is considered a target."

  Usually, I tend not to do. I am in favour of a Divide and Conquer approach and try to have my mapping as simple as possible. It is easier to debug and maintain.

• How to insert data into the table by using the expression builder in the assign activity

  How to insert data into the table by using the expression builder in affect business in BPEl, I use SOA Suite 11.1.1.5
  Can someone help me please

  Hello

  I don't think that oraext:query-database() can insert data into the table.

  What are your needs?
  Can not you plan to use the DB adapter with the insert operation?

  Kind regards
  Neeraj Sehgal

• How to select data using the same remote database column name 3

  Hello
  
  
  Can anyone help me on how to get the data with the same remote database column names 3 and a unique nickname.
  
  E.g.
  
  SELECT *.
  B.SID, b.status, SUM (b.qty) qantity MAX (b.) date_as_of
  Of
  * ((table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3) has, *)
  (* (table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3) b). *
  WHERE b.dept = 'finance '.
  AND a.position = "admin".
  AND a.latest = 'Y' AND (b.status <>"MLT") AND b.qty > 0;
  B.SID GROUP, b.status;
  
  NOTE: the instructions "BOLD" is just an example of what I want to do but I always get an error beacause of ambiguous column.
  
  Thanks to advnce. :)
  
  Published by: user12994685 on 4 January 2011 21:42

  user12994685 wrote:

  Can anyone help me on how to get the data with the same remote database column names 3 and a unique nickname.

  Not valid. This makes no sense and breaks all the rules of scope-resolution. And if it is in a single database, or uses tables in databases, is not relevant.

  Each object must be particularly well identified. If you cannot do this:

  select * from (table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3) a
  

  3 objects cannot share the same alias. Example:

  SQL> select * from (dual, dual) d;
  select * from (dual, dual) d
                     *
  ERROR at line 1:
  ORA-00907: missing right parenthesis
  

  You need to combine objects - by using a join union or similar. He will have to be done as follows:

  SQL> select * from (select * from dual d1, dual d2) d;
  select * from (select * from dual d1, dual d2) d
         *
  ERROR at line 1:
  ORA-00918: column ambiguously defined
  

  However, we need to have unique column in a projection of SQL names - so the join of the need to project a unique set of columns. So:

  SQL> select * from (select d1.dummy as dummy1, d2.dummy as dummy2 from dual d1, dual d2) d;
  
  DUM DUM
  --- ---
  X   X
  
  SQL> 
  

  I suggest that you look carefully at what opportunities are and how it applies in SQL - and ignore if the referenced objects are local or remote, because it has no effect on the basic principles of scope-resolution.

• Compare a date with the date system

  Hello

  I use the script (that I found in this forum) in below in order to obtain a date of datefield1, add a year and give the date of datefield2.

  It works very well.

  Kai var = util.scand ("yyyy-mm-dd", this.rawValue);
  var sFullYear = oDate.getFullYear ();
  var sMonth = oDate.getMonth ();
  sDate var = oDate.getDate ();
  Datefield2.FormattedValue = util.printd ("JJ", new Date ((sFullYear+1), sMonth, sDate));
  Datefield2.RawValue = Datefield2.formattedvalue;

  But now I would compare the new date (David [added a year]) with the date current system (cDate).

  Does anyone have an idea how to compare dates? The result should change color as below.

  If (David < cDate) {}
  Datefield2.fontcolor = "255,0,0";
  }

  Thank you very much.

  Kind regards

  ra_be

  Try to use the Date of Javascript object:

  var myDate = new Date();
  myDate.setFullYear (2010,0,14);
  var today = new Date();

  If (myDate > today)
  {
  Alert ("the date is before January 14, 2010");
  }
  on the other
  {
  Alert ("today, it is after January 14, 2010");
  }

  If this does not work, try the analysis on the month, day and year, and then do a comparison on all of them (without forgetting to convert strings of months an integer. For example if you store the release date: February 2, 2009, February goes to 2).

  Then your comparison would look like:

  if(myYear == sysYear) {}

  if(myMonth == sysMonth) {}

  if(myDay == sysDay) {}

  days are equal

  }

  Else if (myDay<>

  myDay is before sysDay
  }

  else {}

  myDay is after sysDay

  }

  }

  }

  essentially to follow this same logic for comparisons of month and year and it should work as well.  It would be certainly cleaner and much easier using this Date however (http://www.w3schools.com/jsref/jsref_obj_date.asp)

• How do you communicate with the Apple Watch

  How do you communicate with the Apple Watch

  Hello!

  Welcome to the Apple community. I'm not quite sure what you mean when you say "communicate" with the Apple Watch, so I'll give you a few options that can respond to your request.

  (1) the Apple Watch supports Siri, just like the iPhone and the Mac. To apply, simply say "Hey Siri" while the wrist is triggered, and your watch will respond. Alternatively, you can hold the digital Crown and Siri will be activated. As soon as Siri is activated, you can ask him questions such as "what is the weather today" or "reminder", or "Let's start a workout."

  (2) you can manually send SMS via your Apple Watch by use of Siri, or opening the messaging app. That Siri send your messages, just say 'Hey Siri, send a text < name >' and Siri will open the Messages app and wait to talk to you about your message. If you want to move the Messages app manually, press the digital Crown and will take you to the home screen. In the home screen, select the Messages app (a green icon with a word inside bubble). Any existing message log must appear, and you can type on a given message log and choose to respond.

  (3) If you want to place a phone call using your Apple Watch, you can say "Hey Siri, call < contact name >". If you have several numbers for a particular contact, Siri will ask you what number you want to call. You can also you can present a more specific request like 'Hey Siri, call < contact name >, < number >' with the number favorite is 'work' or 'House' or 'mobile' etc. So the demand go something like "Hey Siri, call Barbra, House".

  If you are still at a loss, with regard to the types of orders that Siri will accept, you can always ask. Say 'Hey Siri, what can you do?' and she will give you a list of commands that she will answer to the.

  If all goes well, I addressed your question. If not, please provide a little more information and I'll do what I can to help you.

  Good luck!

• Does anyone know how to display along with the app on the Mac App Store in the Sierra of MacOS?

  Does anyone know how to display along with the app on the Mac App Store in the Sierra of MacOS?

  I've just updated to Sierra. Since the upgrade did several reboots. When I discover an app the side also shows "4 +" or similar and I click on the note to view reviews and ratings of customer, a blank screen appears. Everyone knows this or have a way to solve this problem?

  I see even here in Seattle, so I think the question is about the end of Apple.

  By the end of 2012 Mac minis, macOS?  Watch 38 mm silver AL, watchOS 3; iPad 2 Air & iPhone 6 + iOS 10.0.1;  Apple Airport Express

• Can I use an SD card with the new MacBook?

  Looking to buy a new MacBook. From what I can tell there is no SD card reader.  I don't see any accessory adapter for SD readers either.  Is it possible to use an SD card with the new MacBook?  Thank you!

  Only I can find is for iOS devices > > http://www.apple.com/shop/product/MJYT2AM/A/lightning-to-sd-card-camera-reader?f node = 91

  On the SDXC - Apple Support and SD card slot

  I hope someone will find an adapter for you.

• How to erase data from the iphone if I lost and iphone is offline

  How to erase data from the iphone if I lost and iphone is offline

  < post branched out by host >

  Hello

  What to do if your iOS device is turned off or offline?

  If your missing device is turned off or offline, you can still implement this Mode lost, lockor remote wipe. The next time your device is online, these measures will take effect. If you remove the device from your account while it is offline, pending actions for the device will be cancelled.

  If your iPhone, iPad or iPod touch is lost or stolen - Apple supports