Similar Questions

• How to download jsk for webcenter sites 11.1.1.8

  How to download jsk for webcenter sites 11.1.1.8

  Well, you must have a paid oracle support account.

  -Connect to My Oracle Support (support.oracle.com).

  -Click on the tab for patches and updates &

  -Search by 'Product or family' and enter 'Oracle WebCenter Sites' of the product.

  -Select 'Sites 11 GR 1 material' for the output, and then click search.

  -You will see "Sites WebCenter Oracle 11 GR 1 material Jump start Kit (Patch)"

• How to clear the table dhcp clients

  Does anyone know how to clear the Table of Clients DHCP?

  I have a WRV54G.

  Concerning

  I understand this is a very old post, but since I found it when I was looking for the same answer in 2009, I thought go ahead and give my $.02 worth.

  I have a different router, so it may not be present in your.

  I use a version of the firmware WRT54GLwith 4.30.7 and finally found on the status under "Local network" page a link to the DHCP table. You can click on that and delete existing IP addresses.

• How to restrict the tunnel VPN Site to site traffic thrue

  Hello

  I have a tunnel from site to site, where Site 1 is the local site and main site.  and 2 the site is the remote site.

  How to limit the traffic of site 2, so that they can only reach a few IPS on the lokal site.

  But since the lokal site all IP addresses must be able to reach all of the IP addresses to site 2 (remotely).

  an access list to the 'inside' interface does not work, since all the acl is bypassed for the interfaces for IPSEC traffic.

  Then, I tried to make a political group where I only allow traffic to servers specifik, but site 2 can still reach everything on the lokal site.

  Am I missing here?

  Best regards

  Erik

  Hi Erik,

  Unfortunately, the only options that we have are VPN filters that are two-way and disabling the sysopt feature.

  If you have a core switch/router we can block traffic on this device by using the access list or null routes.

  See you soon,.

  Nash.

• How to know the tables used in packages of a schema.

  How to know the tables used in packages of a pattern that I have connected.

  SELECT DISTINCT referenced_owner, referenced_name

  Of all_dependencies

  Owner WHERE = "MY_USER_NAME".

  AND type ('PACKAGE', 'BODY of PACKAGE')

  AND referenced_type = 'TABLE '.

• How to purge the table ECX_OUTQUEUE of the ECX_OUTBOUND AGENT

  How to purge the table ECX_OUTQUEUE of the ECX_OUTBOUND AGENT

  904632 wrote:

  How to purge the table ECX_OUTQUEUE of the ECX_OUTBOUND AGENT

  Please see (how to recreate the ECX Related queues? (Doc ID 1354312.1)).

  Thank you

  Hussein

• How to design the table from the answer to the question table.

  Hi all
  
  I am creating an application for student review online.
  
  There are two types of questions, the only choice of response and multi choice answers.
  
  My question is less than

  create table question_master
  (
  exam_id number references exam_master(exam_id),
  marks_of_each_question number,
  type_of_question char(1),-- single choice answer/multiple choices answer
  q1 varchar2(2000),
  q2 varchar2(2000),
  q3 varchar2(2000),
  q4 varchar2(2000))

  my table to answer (I'm not satisfied with who is below

  create table answers_of_questions
  (
  answer_id number primary key,
  question_ID number referenes question_master(question_id),
  answer varchar2(4000) not null,
  is_answer_correct char(1),--y/n,
  student_selection char(1),--y/n   student select it or not
  ....
  ...

  now, I'm perfectly how to create the RESPONSE table to contain the answers.
  the only choice is good, but several checkboxes choices, what to do?
  How to design the table from the answer?
  
  do I have to create 2 tables to contain the answers?
  Note: the QUESTIONS and ANSWERS, all will be entered by the teacher. students will make a choice and I will store this choice in another table
  may be called STUDENT_SELECTED_ANSWERS or something like that.
  If anyone has some reference to the script retail scheme review online, kindly share with me.
  
  Kind regards.
  
  Kind regards.

  If you need to have answers in another table:

  Student (student_id, name, etc...)
  Review (exam_id, exam_name, etc...)
  Question (question_id, exam_id, question_text)

  Response (question_id, a_text, b_text, c_text, d_text, a, b, c, d).<-- one-to-one="" with="" question="" table,="" a-d="" flags="" used="" to="" indicate="">
  OR
  Response (question_id, answer_id, answer_text, OK)<-- many-to-one="" with="" question="" table,="" correct="" flag="" used="" to="" indicate="" correctness="" for="" this="" single="">

  Student_Answer (student_id, question_id, a, b, c and d)
  OR
  Student_Answer (question_id, student_id, answer_id)<-- creation="" of="" a="" question_id+answer_id="" in="" this="" table="" implies="" the="" student="" checked/selected="" it="" as="" an="">

  To what extent you want to standardize, it is up to you.

• How to set the different HTML (site) page in the workspace during the backup?

  Hello
  How to set the different HTML (site) page in the workspace during the backup?
  
  For example:
  A user connects to the workspace.
  If you have already started the procedure for backup database administrators, the user sees the HTML page that reads "don't touch anything, need a backup procedure.
  
  Thank you to
  Marek

  Hi Marek,

  I have not tried, but it seems the most logical way:

  Rename the BpmLauncher.jsp to BpmLauncher.jsp.orig

  Then, create a new file called BpmLauncher.jsp and put the following inside:

  
  Do not touch anything, it takes a backup procedure
  
  

  Kind regards
  Robb Salzmann

• How to add the table radio button.

  Hello
  
  I want to update the record if I want that an option of button raduio shaped tabular .There is no option for tabular.
  How to add the table radio button.
  
  
  Thank you
  
  Published by: 805629 on February 3, 2011 04:56

  Use APEX_ITEM. BOX API in the definition of SQL query for the form of tables

• How to check the table have are all views in oracle

  Hello
  How to check the table have are all views in oracle

  SELECT * FROM user_dependencies
  WHERE type='VIEW'
  AND referenced_type='TABLE'
  AND referenced_name ='Your_Table_Name' 
  

  You can use dba_dependencies to find views in the different schema.

• How to modify a table that is owned by sys?

  I connected as sysdba and created a table. So I decided to remove a column from the table and Oracle gave me the following error message:
  
  ORA-12988: cannot remove column of table belonged to SYS
  
  I have read about the error and learned that I better not create tables when you are logged in as sys. So I can drop all the table, but not a column of the table.
  
  Why is that I can modify the table, but can't remove her columns when I am logged in as sys?
  Is it possible to remove columns from the table, that I created?
  What should I do with this table, I created under sys? Do I have to delete the entire table, because it is immutable?
  
  Published by: artanis April 12, 2010 03:47

  Hi Artanis,

  See for this just to ensure that everyone connected as user SYS should not intentionally or by mistake be no matter which column of a table that is owned by SYS because the sys user owns all the data dictionary tables and Oracle is not one of these tables in no case be changed or you can say that they do not want anything in the SYS schema should be modified by manual action as any structure of the object changes. This is the reason why it is advisable to do not create user objects in the sys schema.

• How to keep the tables in mode fixed?

  Don't know about you but I'm not used to the fact that available in many 3.5.3. moves horizontally and vertically. It distracts me a lot, especially with the touchpad on my Macbook Pro. Is there a way to get rid of this automatic void of white on the sides and bottom. If the table is small, there is no need to make "wobbly", don't you think?

  Someone at - it an idea?

  Hi BassPlaya,

  I think that what you are wanting to do is to reduce the size of the painting that arrays of numbers are sitting on.

  As I know there is no way to do. You can drag the table upwards and to the left, but do not stop when the yellow guides appear or hide you the first lines/colomns and be unable to view/edit the.

  I found this problem bothers me is no longer on the Mac-I set my scroll automatically.

  Quinn

• How to empty the table 2D?

  Hi all

  How to empty a table 2D in TestStand? I have a sequence of test configuration with several 1 d and 2D arrays as local variables. At the end of this sequence, the user can choose an option to restart the installation. In this case, I want to clear all the tables, because all are mandatory and may remain empty, as defined by the user. I use the DeleteElements method to empty the table 1 d. There are notes in the help: "this method is only valid for one-dimensional array objects. Use the PropertyObjectType.ArrayDimensions property to change the size of the objects in multidimensional array. »

  But PropertyObjectType.ArrayDimensions is read-only.

  Thanks in advance.

  Hello

  SetBoundsByStrings("[0][0]","[0][0]") => 1 element: Locals.Array2D, Array of Type [0.0] [0.0]

  BUT

  SetBoundsByStrings("[0][0]","[][]") => no items: Locals.Array2D, Array of Type [0.empty] [0.empty]

  The upper limits must be defined without any number.

  Bruno

• How to make the table from separate text semikolon

  Hello

  I have a text with multiple lines. The lines are separated with \r\n.

  In every row is the same number of values that are separated by a semikolons.

  How can I (easy) make the tables of each value online?

  Currently, I solved it by creating a loop and using game-model, register shift, to insert to the table... But this looks very great.

  How can I make this easier?

  Thanks for the help

  Hello

  We must define the separator.

  See the image as an attachment.

  Mike

• How to search the table with margins?

  Hello!

  I have a signal that I admire from a PXI-5600 and store it in a table. What I want to do is to find the top of the signal (which I did successfully) and then calculate the bandwidth.

  What I do now, is to take the peak value and calculate 20 dB, so I use the "search of table 1 d' but I get index - 1. My guess is that this is happening because of this doesnat table contain EXACTLY the calculated value.

  Can I search somehow in the table for the values around one calculated?  For example; If I calculated the 10.08 value I want to search all between 9, 9 - 10.1.

  so I wonder how I can trace these points whith a line between them in my diet already spectrum