How to monitor the CPU, memory and i/o on the system

Hello..

Some body help me?...

1. how to manage the monitoring of the performance of the system and the database during execution of ODI?
2. how to monitor the CPU, memory and i/o on the system?

TQ
balleur

In an attempt to partially answer your questions:

1. how to manage the monitoring of the performance of the system and the database during execution of ODI?

Monitor the performance of the application from a commercial point of view. As transactions per minute, or response time or time elapsed for the key events of the company. Monitor the activity of the material such that the CPU usage is not necessarily linked to the performance of your application. Performance should be measured from top to bottom - business first, then the lower levels until you get finally to computer equipment. Only if you get a problem to the next level - response time is too large, for example - you can go through the lower levels to identify the cause and fix it.

2. how to monitor the CPU, memory and i/o on the system?

I personally use "sar" on UNIX-BASED or Linux, or rather "CFDCs" which is the system activity data collector. SADC will measure and collect data on activities on CPU, memory, disks, etc. and save them to a file in binary format. You can then extract these measures later for analysis using SAR (sar f sadc_file_name). The benefits of SADC are that it is light (these operating systems measure such things anyway, just CFDC records far), it records everything at once (with the exception of the network), it records the time stamp too for each measure, and you can analyze it later when you want to.

There are commercial products out there too who do similar work, with additional features, such as the integration of Oracle and the relationship between several systems. TeamQuest is an example, but there are others also. (I do not work for TeamQuest, but I used their product in the past).

John

Tags: Database

Similar Questions

  • How to monitor my cpu heat and other items on my desktop HP Pavilion p6210f

    How to monitor my cpu heat and other items on my desktop HP Pavilion p6210f

    Lawrence123456,

    The applications are numerous, but I use:

    http://www.cpuid.com/downloads/HWMonitor/1.19-Setup.exe

    http://www.cpuid.com/downloads/CPU-z/1.60.1-Setup-en.exe

    http://www.cpuid.com/downloads/PC-Wizard/2012.2.0-Setup.exe

  • How to monitor the TX and RX on PERFORMANCE for virtual network adapter BASP monitor?

    How to monitor the TX and RX on PERFORMANCE for virtual network adapter BASP monitor?

    I have a virtual network adapter that is created with Broadcom.

    This virtual interface named "BASP eCard" visible on the performance monitor in the category 'Rhythm Pipe' but not in the category "Network Interface".

    This is problematic because the Tx and Rx (bytes received/send in second) is available in "Network Interface" that show physical network cards only.

    Someone has an idea?

    Thank you

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • How to monitor the use of the Hyperion applications

    Hi all
    We have developed a classical Planning Application in Hyperion 11.1.2
    The application is running in production mode, and now we want to monitor the use of this application, in this regard, I have following questions:
    (1) how to activate the newspapers?
    (2) how to monitor the time of connection and disconnection of each user
    (3) how to check the amount of data entered in a particular week
    (4) how to check that data are entered against how much the faculty members?

    I won't pretend to know what should I know about this subject, but I get this question of a large number of customers. So, here is my answer. There is no right way to monitor who logs and how many times they connect. If you enable the audit DATA, that you can do is to see when a user loads the data and how often they do. This does not match the connection, but planners usually don't connect to display data (which are normally made in EN or SmartView), they connect to load/update of data. With active audit DATA, you can query the HSP_AUDIT_RECORDS table, which is where the audit is stored, and see how many times the user load the data and the last load of data. Is not correct, but it is far more closely than any other method I've found.

    Example of the last connection (really last loaded data)
    SELECT USER_NAME AS 'User', time_posted as 'Last Login Time' OF HSP_AUDIT_RECORDS WHERE TYPE = "data";

    You can use a similar query to count the number of data loads.

    This would also show you what the user has launched it to business rules.

    Another option would be to enable SSAUDIT on the planning application in Essbase (this is done in the Essbase - google SSAUDIT server configuration file). This will create 2 files. The first is a file index or pointer. There will be a line for each record, via a web form or SmarView load. The second file contains all of the loaded data. The first file will tell you that loaded which lines in the second file and what time he did. The downside is that each connection between planning and Essbase uses the ID of the source of data for planning. So, it always shows the same loading data ID and will not be the real of the user who did it.

    Note that users do not have to connect through planning. They can directly connect to Essbase. All financial reports that would be misunderstood by looking only at the planning.

    If you really want the actual load, you really watch the Essbase and Essbase application log files. Would not show you users, but could show you the number of queries, the data loads, etc. You could analyze these logs in a relational table for quick access to the use of the query.

    That's a lot of things to take. Unfortunately, to answer your question, it is not a quick option, "click here."

    Utility to analyze the logs can be found at http://code.google.com/p/jrightlog.

    ------------
    Kyle Goodfriend
    http://www.in2hyperion.com

    Please be sure to assign the post as answered and answers as response or useful if others can benefit from your experience.

  • How to monitor the activities of internet users without using third-party software. We have some 60 windows domain user

    Hi all

    We have 60 knots which is connected with the windows domain. How to monitor the activities of internet users via the windows server

    without third-party software.

    Thanks in advance

    Alam

    Hello

    The business support, you can find forums on TechNet, please create a new post at the following link:

    http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  • How to end the system idle process

    How to end the system idle process
    ... "it is to consume my whole CPU.

    system:
    HP pavilion g4 series
    Intel core i5

    No it's not! Maybe someone else can give a better explanation, but the way I understand it is that when your system is idle, the system shows 100% idle process or nearby and it is because it has no applications or programs that run, but as soon as you open a program or run an application, and it requires CPU resources say between 1 and 4%, you will see the system idle drop in numbers, which shows the amount of the resources required by the program or open application.

    So I believe that everything that is, show processor resources available to a given point in time.

    Now, a virus can attack the process and change his behavior? I don't know, but if you suspect a malware attack, run complete scans of your system just to be sure.

    Good luck.

  • Satellite L650D - 10 H - how to recover the system?

    Nice day

    Today my OS on my laptop has been altered, he told me to restore my system. Windows recovery program does not work, every reboot of the same corrupted file. So I tried the vista edition Windows Home premium 64 bit dvd of my brother. Changed the options in BIOS and boot from there, but it took about 20 minutes to start the installer with the language menu.

    I noticed that the lamp 'written on the hard disk' shines all the time and from time to time the HARD drive is not listed in my BIOS. Maybe my HARD disk is damaged?

    Now my question is, how to restore the system or to stand up a new OS? What can I do to get my laptop still running? Where to send and what costs?

    best regards and thanks for any help
    oxxxe

    Edit: now the hard drive is still listed in the bios

    Post edited by: oxxxe

    Hi oxxxe,

    Generally you can restore the factory settings using the Toshiba recovery disc. Have you created this disk?

    In General, if the HARD disk does not appear in the BIOS from time to time, it seems to be a malfunction of the HARD drive and it should be changed.
    If your laptop is under warranty, an ASP may fix this problem for free. A list of all the authorized service provider, you can find on the Web from Toshiba site.

  • How to clean the system

    original title: update

    I HAVE PROBLEMS ON MY COMPUTER... SOMEONE SUGGESTED THAT I TAKE GET ADJUSTED UPWARD.  IS THERE SUCH A THING AS A PC TUNE - UP TO?  IF SO, CAN I DO IT MYSELF OR SHOULD I TAKE IT TO A SPECIALIST?  SOMEONE CAN ME SAY STEPS SHOULD I TAKE?  I WAS TOLD THAT MY OPERATING SYSTEM DOES NOT RIGHT AND THAT IT IS ORIGINALLY MY MCAFEE NOT WORKING PROPERLY.  I'M LOOKING TO REMOVE ANY VIRUSES, TROJANS, MALWARE, ETC FROM MY COMPUTER AND GET MY COMPUTER RUNNING SMOOTHLY.  Thank you.

    Hello

    PC TUNER is 3rd party software and it is not recommended by Microsoft.

    WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    I suggest you to follow the methods and check.

    Method 1:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 2:

    I suggest to download and install the Microsoft safety scanner and run the scan and check.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 3:

    How to troubleshoot performance issues in Windows Vista

    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista

    http://support.Microsoft.com/kb/959062

    Difficulty of Windows system performance slow computer problems

    http://support.Microsoft.com/mats/slow_windows_performance/en-us

  • My question is how to open the system advanced settings in window 7 64-bit home preuim

    My question is how to open the system advanced settings in window 7 64-bit home preuim

    Hello

    Assuming you mean the Windows Advanced System Settings screen, then right click on my computer and choose Properties.  On the left side of the screen, you will see a link for the advanced system settings.

    You can also call directly my pressing the windows and R key (which will bring up the Run dialog box) and typing in control sysdm.cpl

    I would like to know how you, or if you want to say something else.

    Good luck & enjoy Windows 7
    Jon

    If this message was useful and allowed, please consider the vote and it offers as a response...

    My Blog - www.insidetheregistry.com

  • How to remove the system idle from dashboard?

    Hi all!

    Anyone know how to remove the system idle from dashboard?

    It is possible at all?

    Thaks.

    No, you can't "remove them from the dashboard.

    You would turn them off (aka set them as inactive), and this would remove them from all reports.

    Best regards

    Jon Hemming

  • How to reset the System Volume Information folder?

    I would like to know how to reset the System Volume Information folder to empty all the potential viruses.

    Does anyone have any suggestions?

    Thanks in advance for your suggestions :>

    I use cleanmgr /sagerun:1 of the dialog box run when you use a switch.

    However, I usually just use these instructions.

  • How to open the system maintenance Troubleshooter in windows vista

    How to open the system maintenance Troubleshooter in windows vista?

    Hello

    Please be informed that Troubleshooting maintenance system was introduced from Windows 7.

    However, you can run the fixit mentioned below for Vista.

    http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

    You can take a look at solving the problems of system maintenance in windows 7.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-system-maintenance-Troubleshooter

    For more information, please visit the links below.

    http://www.Microsoft.com/atwork/maintenance/speed.aspx

    Optimize Windows Vista for better performance.

    http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

    Warning of Chkdsk.

    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    For the anti-virus scanning:

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    I hope this helps.

  • When I open a pdf file using adobe default to 139% magnification. How to change the system, so it defaults to the actual size

    When I open a pdf file using adobe default to 139% magnification. How to change the system, so it defaults to the actual size

    Hi christian-laup70425339 .

    Please try this step: -.

    Acrobat > edit > Preferences > Page Display > under Default Layout & Zoom, set "Zoom in" on the value of your choice that you want.

    I would like to know if it works.

    Kind regards

    Christian

  • Computer using only 50% of the CPU memory and 124%

    So when I'm doing intensive tasks (that's to say working in first and then simultaneously connecting clips to compositions of AE and work on them) seemed to me recently to hit massive roadblocks. So ive been editing a project for the last 2 weeks with silky ease. Render times were really low and I was doing enough after things heavy effects. Now all of a sudden in order to export a clip that took me like 1 or 2 mintues before takes like 10 minutes and my computer says that 124% of my cpu is used, and only 10 GB / 32 GB is used. When I RAM preview the same thing. How can I get my memory to be used at 100%? Why the body/AE is now tend to be so slow. Is there something wrong with the program or my PC? How can I optimize those programs so no foreign interference performance?

    Thanks and any help would be really appreciated.

    There is no way to AE or Premiere Pro use 100% of 100% of the time resources. No programs are built this way. You must ensure that you do not die of hunger for other applications of CPU power or memory. I saw so many screenshots of the AE memory settings where people thought they were doing a good thing when they drove their memory allocation in AE so they don't leave enough background apps to function effectively. Think in multiples of 4 GB of memory. If you are running an earlier version of AE, which allows you to assign a CPU to ensure that there is at least a pair assigned to other apps and that AE will use anyone who is left.

    Usually if you follow the recommendations of Adobe (Optimizing after effects of performance - Support Adobe) you will do quite well. Choose the good readers of storage, don't fill them past 80%, close all applications that are not necessary for your work and to organize your projects and the workflow in an effective way, then you're not made things twice or construction projects that would make in much less time if you made and replaced complex effects rather than rely on dynamic links or nested comps for all. You should also understand what kind of success your source footage is added to the project. Highly compressed source files (especially mpeg video) can easily take 3 or 4 times more time to decode as a format of good production. Stabilized warp clips must be rendered, clips that have temporal as mixing time, interpolation effects and other effects of time based will probably benefit PreRender before you apply other effects and make you save a lot of time in the long run. I can't give you a list, you need to know some things on your own and you need to know when the render time of 4 images per second is a good time rendering and when 5 minutes per image is also a good. As gain you experience, you will get a handle on it.

  • We will monitor the system and the home button is so close to the edge of the screen. Sometimes I accidentally click on the monitor of the right hand and lose what I'm working on. How can I move a button at home on the left, if it belongs

    I use a dual display screen, and when I sometimes click on the home button my mouse over to the right screen and change what is on the screen to the right. I would like to move the home return button to the left side of the screen where it has been on Firefox 3. How can I do this

    Use the Customize and drag this button where you want.

    https://support.Mozilla.com/en-us/KB/how+to+customize+the+toolbar

    http://KB.mozillazine.org/Toolbar_customization

Maybe you are looking for