How to move the Virtual Machine VMWare Workstation 10 to a completely different computer

Similar Questions

• How to move the virtual machine from one cluster to another cluster

  How to move the virtual machine from one cluster to another cluster

  If two Clusters are in the same data center, you could do a 'live' migration or vMotion, if that's the case.   If the virtual machine is turned off, it may be migrated regardless of the data center.

• How to move the virtual machine from one host to another?

  The two boxes under ESXi 5.0 (hypervisors freely licensed).

  I have a virtual machine (FreeBSD) that I need to go to another box.

  Network ports are not the same, but I guess that's not a biggie to reconfigure the network cards. Other than that, I have to follow a few best practices/SOPS or copy & paste is everything I need to run perfectly on a different host?

  Thank you very much!

  FastSCP allows you to copy directly between hosts, so it can save a lot of time you copy.  I don't know what you mean by 'manually' copy files.  Do you mean using the vShpere client and download the files to a location then download them to the new host?  Either way works perfectly, but FastSCP you must save a step.

  If you have currently snapshots, you can consolidate first or leave em and just copy them with the rest of the virtual machine. There should be no need to do something with snapshots, if you perform a migration 'offline '.  As long as you take all the files, snapshots will be displayed on the destination host computer when you save the vm on the host.

  I did 'on-line' migration of large virtual machines first to the take a snapshot on the source host, copy basic to the first destination host disks while the virtual machine was still running on the source host.  When I was ready to migrate the CPU processing, I power off the virtual machine, copy the other files (which would include the deltas from disk and whatnot) and turn on the vm on the destination host (which would cause only a few minutes of downtime).  Later, I consolidate records by removing the snapshot on the destination host.  Way to a poor man to do a migration of vm on ESXi free edition with little downtime.

• How to move a virtual machine from one virtual switch to the other since the SDK / command line?

  How to move a virtual machine from one virtual switch to the other since the SDK / command line?

  Joshua Smith

  Are you referring to the evolution of the virtual machines network portgroup of one to the other and in your case potentially issue on to another vSwitch? If so, take a look at this script: updateVMPortgroup.pl everything you do really makes a call to ReconfigVM_Task() and passing in a specification change and put to day the network in which you want to change

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• Expand or move the virtual machine to another partition / hard disk

  I tried to expand my 90 GB disk but nothing changes, i.e. the virtual machine is still to 60 GB. I have VMware Fusion 6 (Mac/Windows 10) and my VM is monolithic mode. In this true HD, I even 50 GB free and I can't increase the amount again in an attempt to rectify this problem and I can not to decrease either. I thought to change the location of the virtual machine to another partition/hd with more space, but I don't know how. So I need little help to choose and implements one of the solutions below:

  - or regularise space for the new amount

  - or move the virtual machine (vmdk) to an another partition/HD

  - or to convert monolithic mode to 2 GB split

  What is the best solution?

  Thanks in advance

  It's help me;

  Resize a Windows Partition with disk management tool

  When you maximize your virtual hard disk, you must also expand partition of your guest operating system to take advantage of the extra space.

  Fusion resizes the partition of the guest operating system when you resize the virtual hard disk. If you hold the Option key when you click apply to resize the drive, you can manually resize the Windows partition. For Windows 8, Windows 7 and Windows Vista you can use the operating system's disk management tool to resize a partition.

  Prerequisites

  Check that your virtual hard disk is large enough to accept the increase in the size of the partition. See resize a hard disk.

  Procedure

  1 right click on computer and select Manage.

  2. double-click on storage.

  3 double-click disk management.

  4 in the list, right click on the partition to expand and select Extend the Volume.

  5 follow the prompts to resize the partition and click complete and the question of the partition in the disk management pane displays its new size.

  6. close the computer management window

• How to move the vm for VMware Server ESXi

  I have a host with ESXi 3.5 and I want to move virtual machines to a different machine with VMware Server 2.

  Any idea how to do to move the virtual machine?

  Thank you

  You can use VMware Converter (free copy).  When you install it convert you a machine and select the Virtual Machine of VMware Infrastructure as the virtual source then Machince as destination.

• Move the virtual machine from one host to another with shared storage

  Hello

  I have a question on how to move a virtual machine from one ESX 4 host to a host ESXi 5.  These hosts have access to the same shared storage but the ESX 4 host is outside the network and host ESXi 5 is inside the network so vMotion is not an option.  They are in different groups.  I know that there must be an easy way to move this virtual machine, but for the life of me, I can't find it.  I guess I have remove the virtual machine from the external cluster but how to make the virtual machine in the internal cluster?

  Thanks in advance...

  If both host access to the data store even where VM's store, just stop the virtual machine, remove inventory on ESXi 4, go to ESXi 5 vSphere vSphere, browse the data store where the VM is stored, do a right-click on the .vmx file and add to the inventory.

• 890124. how to move a virtual machine from one storage to another?

  Hello

  I decided to increase the RAM of a virtual machine and storage space in which stood the machine is less than 1 GB, it says that it is impossible to start the virtual machine. So I decided to move the virtual machine to secondary storage which had enough free space.

  How can I make vSphere Client aware of this change? How can I know what's happened? what I need is to boot the machine which is now moved to secondary storage. is this possible?

  THX

  After again moving data store, you must register this virtual machine to be visible in the list at left.

  1 browse the data store and open the corresponding VM folder

  2. Select the .vmx file and right-click.

  3. Select the option "Add to the inventory" and keep clicking Next until you have finished.

  4. now switch on the machine. He will ask a question that you copied or moved.

  5. Select I moved it.

  6. your machine is running.

  And you can see the virtual machine in the list after step 3 itself.

• Move the virtual machines to new storage device

  I recently added a storage IBM DS3200 SAS device to my VMware ESX 3.5 server.  I am running 6 VMs locally on the server and I would like to move the virtual machines to the new storage device.  I have formatted disks and the ESX Server sees.  What is the best way to move the virtual machines that currently reside locally on the external storage device?

  Thanking you in advance,

  Al

  I guess you could also try using converter

• Monitoring VM - how to restart the virtual machine

  Hi all

  Hit a problem in our environment that can not be solved, but wanted to tender hand to people and see if they have found a way to replace.

  Currently have followed vm enabled in our cluster. Thing is watching us to restart the virtual machine VMware tools demonstrated to a status of "not running" - now, the key is to most of the definitions, the system is available in this case, can be crazy, RDP'ed etc, but we here again them restarted as he finally solves the issue we see (for example unable to connect via citrix for the machines in question)

  Duncan in the post below highlights in order to avoid false positives any i/o to storage/network activity will be verified after that heatbeats failed to "double check" there is a problem with the virtual machine

  Favorite VM monitoring (aka VM HA) - yellow bricks

  What I asked is it possible to replace verification of network storage/IO activity and then restart the virtual machine VMware tools on them stops as soon as?

  Many tx for all thoughts

  «.. . is there a way to replace check network activity of storage/IO and then restart the virtual machine of VMware tools on them stops as soon as...? »

  You can always use a supervision-process inside the virtual machine for this tool (perhaps more followed VM). It acts independently and allows much finer control, i.e. it can try first (re) start vm-tools before restarting. Same BSOD /-kernel panic can be dealt with by VM itself. It can actually be even more robust, not dependent on VMware infrastructure.

• How to disable the server of VMware Workstation share

  How to disable the sharing of VMware Workstation Server using a configuration of the registry or configuration file. I have several workstations on the network that has VMware workstation 8.0.4 install and I need to turn off sharing for all users. This function is located in preferences/Shared VMs.   I need to be able to adjust this setting to disable remote. The host computers using windows xp. Any help will be appreciated.

  It depends how you are going to access various systems is however here two options that you can include in any method you choose.  We need to create a. CMD file and the other is to use just one. REG file.

  The command Disable_VMwareHostd.cmd of Script can be as simple as:

  net stop VMwareHostd
  reg add HKLM\SYSTEM\CurrentControlSet\services\VMwareHostd /v Start /t REG_DWORD /d 00000004 /f
  

  The Disable_VMwareHostd.reg file would be:

  Windows Registry Editor Version 5.00
  
  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\VMwareHostd]
  "Start"=dword:00000004
  

  Note: Always two empty lines at the end of the .reg file.

  The syntax of the command to execute would be:

  regedit /s Disable_VMwareHostd.reg
  

  Note that just by using a .reg file, you must always stop the VMwareHostd Service, so I would opt for the use of the method of Script command as it will stop the VMwareHostd Service and turn it off at the same time.

  I still have my put networks in place to be able to (with authentication) execute commands remotely and or push the or the files that are necessary to achieve the objective.  In a case like this, when I had hundreds of systems to change I write a binary executable to fix the problem, which would automatically run when the user logged on to the domain, but if you don't have programming skills so then using a Script command and or file Reg can / will do the job.

• How to make the virtual machine in 64-bit with VMware6.5

  My CPU: AMD Turion 64 * 2

  Operating system: Windows xp 32

  Question:

  I want to run Open solaris 2008 which is 64 bit, I did a virtual machine but it is 32-bit. You tell me how to make the virtual machine in 64 bits in VMware6.5, I really appreciate.

  Yes.  Power off the virtual computer.  Change the settings.  Change the guest OS to Solaris 10 to Solaris 10 64-bit.

• How can I move the "Virtual Machines" folder to the My Documents folder?

  VMwareFusion is to put the "Virtual Machines" folder in the Documents folder in the home folder (/users/ [username] / Documents), how can I move elsewhere (as/Library/Application Support)? The user Documents folder is not the right place for automated it system files, it is intended for personal documents.

  
  

  I am running VMware Fusion on OS X Yosemite (and the virtual machine is Windows 7).

  You can keep your virtual machines anywhere you want. Here are the steps to move:

  1 exit VMware Fusion. You can stop first of all of your running virtual machines.

  2. drag your virtual computers folder or the individual VM "files" where you / them. Filenames usually end in ".vmwarevm". There is no need to call the new folder "Virtual Machines" - you can call it anything you like.

  3. Launch VMware Fusion. If the library of the Virtual Machine window is not open, open it (Windows menu-> Virtual Machine library).

  4. ensure that all of your icons for the virtual machine are light gray and say "file not found".

  5. right click on each virtual machine in turn, and select Remove. When you are done, leave the window of Machine virtual library empty open.

  6. in the Finder, drag the icons of file virtual machine in their new location and drop them in library of virtual machines VMware Fusion window. Drop them one by one in the original order, you got, or rearrange icons later.

  7. run your virtual machines as before.

  When you create new virtual computers, navigate to the desired file before the Save.

  IMPORTANT NOTE: If you your folder of Machines ~/Documents/Virtual excluded from backups Time Machine, don't forget to change the exclusion to the new folder.

  Time Machine backups are not reliable for virtual machines. You must have another strategy. (I shut the virtual machine down, compress the 'file', and then move the compressed file to a folder that is included in the Time Machine backups. This isn't the only strategy, but it works for me.)

• Move the virtual machine to the workstation from 9 to 7 Workstation

  Hi all

  I have created a virtual machine (PBX) on VMWare Workstation 9 and I need to move it to Workstation 7.1.  I tried to create an ovf file using ovftool, but I couldn't expand the FVO on the side 7.1.  Is there anything else I can do to move the machine to the course?

  Thanks for your time.

  Martin

  "You can just copy the file to the virtual machine with all its files, this will keep even the machine virtual UUID and MAC address if you select 'I moved' we ' when you start the virtual machine after you have copied. However, before copy on the virtual machine, make sure that you go to compatibility mode (formerly hardware version) from the 9 VMware Workstation interface.

  André

• How to move a virtual machine in the warehouses of data on ESXi 4.1.0

  All,

  I need to move a virtual machine from a data store to another on the same host.  I have two drive bays where each array disk is its data store on.  However, one of them has problems if I want to move two of the virtual machine to a data to another store.

  Is it possible through vsphere and if so, how?

  My host is a:

  Dell PowerEdge 2950

  vSphere Client Version 4.1.0

  VMware ESXi 4.1.0

  Hello

  1. turn off the virtual machine to be moved

  2. right click on the virtual machine, and then select Remove in the inventory (the fleeting VM on the data store)

  3. browse the data store, in the left pane, right-click on the folder of the virtual machine and select move to...

  4 browse the new data store, open the VM folder

  5. save the .vmx file

  6. start the virtual machine in the new location and make sure that it works.