How to navigate on the disks to a computer using a command or powershell prompt

Hello

I wanted to know if it was possible to browse the readers of different computer from my computer. The two computers are on the same domain/network.

Lets say that I am an admin on a network that has the right to access anything on the network. Each computer maps a network as a letter Mr. I drive uses the computer dellcomp1, and there is another computer on the network called dellcomp2. I want to be able to navigate to dellcomp1 to dellcomp2 and open his drive M and run a program. The program that runs I will get that I need information on dellcomp2. Is this possible?

My goal is to be able to run this program to get the information I need to computers without disturbing the people who use computers. I know that I could just go to people's computer and run the program or the remote control even in their computer and run the program but I want to know if there is a way to do it without interaction with people who use computers.

I know that in Windows PowerShell, I can navigate to more than just my C drive on my computer. If I could find a way to navigate to other computers and do the same thing my life would become a little simpler.

Any information is appreciated.

Thanks in advance!

This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
*

Tags: Windows

Similar Questions

  • diskette contained already on it, but he says now I format. How to info on the disk without reformatting?

    On my old computer with Windows XP, I downloaded different files on the floppy drive.  Each of the disks have been formatted before that I downloaded.  With my new system which is Vista, I had to put an external floppy drive to read my files, but when I put the disc, it tells me they need to be formatted.  I tried the disks in my computer at work (which has XP) and he tells me the same thing.  How can I get information on these disks without reformatting?  Or why is it telling me that formatted disks before have format again?

    This error message indicates that the drive is damaged and the data on it can no longer be read.  If this is happening in two different disk drives then it most likley means that disks have failed.

  • I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

    I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

    original title: reinstall Windows Vista

    I was getting a new hard drive to my HP laptop.  Since I have a key for windows vista from the purchase of the laptop, how can I get the disk to re install the operating system?

    Contact HP (if they had not initially you provided with support or the media manufacturing process or you have lost the media and/or you don't want EU to some tools to clone the old drive to the new or can not do...) for a copy of the media restore/recovery of your system.

    http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?PG=3

  • How to navigate all the Checkbox State in a ListView

    I have a ListView with box on each line. I want to make a feature to remember the State of the check box so users checked someone.

    I tried to use a signal when the box is checked to notify a function in a CPC to remember the current state of the check box, but when I want to do with the context property object registed in the PRC, it always say this object cannot be found.

    Do you know how to make this kind of functionality? Or how to navigate all the checkbox in the ListView? Thank you very much.

    listItemComponents: [
        ListItemComponent {
            type: "textItem"
                TextItem {
                    id: textitem
                    onItemcheck: {
                        _app.setCheckboxStatus(checkBoxId); //ReferenceError Can not find variable _app
                    }
                }
         }
    ]
    
    mainApp.cpp: qml->setContextProperty("_app", this);
    
    TextItem.qml:
            signal itemcheck(string checkBoxId)
    
            CheckBox {
              onCheckedChanged: {
                if (checked)
                    itemcheck(ListItemData.id);
              }
            }
    

    to solve the referance error pls follow these steps

    listItemComponents: [
        ListItemComponent {
            type: "textItem"
                TextItem {
                    id: textitem
                    onItemcheck: {
                       textitem.ListItem.view.setCheckboxStatus(checkBoxId);
                    }
                }
         }
    ]
    
    function setCheckboxStatus(checkBoxId)
    {
     _app.setCheckboxStatus(checkBoxId);
    }
    

    Add setCheckboxStatus function in ListView

  • How to navigate through the file to the blackberry playbook using Tablet blackberry OS for Adobe Air SDK

    Hi all

    How to navigate through the file to the blackberry playbook using Tablet blackberry OS for Adobe Air SDK.

    And also I want to download this file on the server.

    Help me by providing examples of coding.

    Thanks in advance.

    With respect,

    Sébille C

    Here are some tips to help you get started.  It all depends on the terms that you use for your search.  For the first, I would use "adobe air browse file."  For the second, I start with only a variation as "adobe air download file" and then adjust according to the first results.

  • How to navigate to the next page based on the value returned by the method call inside the action attribute of the command key.

    How to navigate to the next page based on the value returned by the method call inside the action attribute of the command key.

    I use JDeveloper 12.1.2.0.0

    < af:button id = "tt_b2".

    rendered = "#{attrs.nextRendered} '"

    partialSubmit = 'true '.

    action = "#{attrs.backingBean.nextAction} '"

    Text = "next".

    Disabled = "#{attrs.nextDisabled}" / >

    private static final String NEXT_NAVIGATION_ACTION = "controllerContext.currentViewPort.taskFlowContext.trainModel.getNext";

    public String nextAction() {}

    If (validate()) {}

    updateModel();

    Return NEXT_NAVIGATION_ACTION;

    }

    Returns a null value.

    }

    Use case is made for model train, which is being implemented based on this blog: http://javacollectibles.blogspot.co.UK/2014/10/ADF-train-template.html

    We define a generic action following in the model, but the action must be called under certain conditions, based on the question of whether all validation controls had been passed on no.

    You can do this in two ways:

    1 returnValue = (String) ADFUtils.invokeEL("#{controllerContext.currentViewPort.taskFlowContext.trainModel.getNext}");

    return returnValue;

    2.

    public String getNextTrainStop() {}

    String nextStopAction = null;

    ControllerContext controllerContext = ControllerContext.getInstance ();

    ViewPortContext currentViewPortCtx = controllerContext.getCurrentViewPort ();

    TaskFlowContext taskFlowCtx = currentViewPortCtx.getTaskFlowContext ();

    TaskFlowTrainModel taskFlowTrainModel = taskFlowCtx.getTaskFlowTrainModel ();

    TaskFlowTrainStopModel currentStop = taskFlowTrainModel.getCurrentStop ();

    Terminus of TaskFlowTrainStopModel = taskFlowTrainModel.getNextStop (currentStop);

    nextStopAction = nextStop.getOutcome ();

    _logger.fine ("train, next stop:"+ nextStopAction ");

    Return nextStopAction;

    }

  • How can I recover the disk space on esx

    yesterday, I removed two my esxi machine vm - I remove disk thinkng it could free up space disc instead of 'delete inventory '.

    my box of esx has about 334 GB in its datastore1

    I don't have a virtual machine in esx box and that vm's only 143 GB on its two disks, however my datastore1 only show it is has about 80 b of space left.

    1. I did something wrong is eliminating the VM boxes that do not free until their allotted disk space?

    2. How can I recover the disk space I know is free so that I can port on another machine on esx box?

    Thanks in advance.

    Hello.

    Try to use the browser to store data on your data store 1 and see what files are actually there.  Sometimes things get left behind and need to be cleaned manually.

    Good luck!

  • How can I install the disks 2 and 3 Please help

    How can I install the disks 2 and 3 of my new adobe Elements 10 - after the first disc I couldn't out disc and then I hit ok and it went away installation mode

    This is because the dialog is simply a reminder to insert disc two.  When you have finished installing disc one then please insert disc two if you want to install the content on this disc.  You can find more details about what is included on the disks to install Premiere Elements, Photoshop Elements - http://helpx.adobe.com/photoshop-elements/kb/install-premiere-elements-photoshop-elements. html.

  • How can I change the owner of a computer or a cell phone

    need help

    How can I change the owner of a computer or a cell phone

    Hi Wayne,

    In order to change your username registered on the computer, you need to change information in your registry.

    a. Click Start, type regedit in the search box and press ENTER.

    b. navigate to the

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion

    Note: The current Version will be two editable sections called RegisteredOrganization and RegisteredOwner in the right side.

    c. double-click on RegisteredOwner and enter your information in the "Value data" section, and click OK.

    d. exit the registry editor and restart the computer.

    Your new values will be present when you open the properties of the computer.

    Important: The above article contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    For more information about how to back up and restore the registry, follow the steps from the link below:

    Back up the registry

    Hope this information is useful.

  • How can I download the DVD on my computer in order to send the file to others?

    Original title: my friend gave me a DVD with some footage from his film. He now plays on Windows Media Player. I want to know how I can download the DVD on my computer so that I can send the file to others. Thank you.

    My friend gave me a DVD with some footage from his film.  He now plays on Windows Media Player.  I want to know how I can download the DVD on my computer so that I can send the file to others.  Thank you.

    Hello

    Try the following steps to copy the files and folders of DVD.
    a. right click on the "Start" button and select "Explorer" to open Windows Explorer.
    b. click the "Computer" link in the left side of the Windows Explorer navigation pane. Readers, including the DVD player, hosting will be listed.
    c. click on the DVD drive. In the right navigation pane lists the folders and files on the DVD.
    d. right-click on a file or folder and select "Copy" from the context menu, or press the CRTL + C keys, to copy the file or folder to the Clipboard.
    e. navigate a directory on the drive of destination and do a right click. Select 'Paste' or press CTRL + V keys to paste the folder or the files in the new location.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How to add all the tabs open as I used to?

    How to add all the tabs open as I used to?

    You can go to bookmark all tabs by right-clicking a tab, or use the hotkey Ctrl + Shift + D

  • How to get to the carmera on this computer?

    original title: carmera

    How to get to the carmera on this computer?

    Hello

    1. What is the number of brand and model of your computer?

    2. what version of Windows you are running on the computer?

    If you are referring to the webcam built into your computer, then check the documentation that came with the computer to turn it on, let me know if it's something else.

    See the link below

    See to believe

    http://Windows.Microsoft.com/en-us/Windows-Vista/seeing-is-believing-use-a-webcam-to-bring-your-Instant-Messaging-to-life

    You might want to know

    What version of the operating system Windows am I running?

    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  • How can I change the time on my computer from 24 hour to 12 hour clock clock?

    How can I change the time on my computer from 24 hour to 12 hour clock clock?

    How can I change the time on my computer from 24 hour to 12 hour clock clock?

    Here is the method for Windows 7. If you are using Vista, there may be a slight difference, but basic procedures should be similar...

    Start > Control Panel > region and language > Format > more settings > time tab >

    under time format, set hh: mm hh: mm

    H = 24 hours

    h = 12 hours

    Click OK when finished.

  • How can I disable the mouse pad when you use a mouse plug-and-play?

    How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

    Hello

    Check with support of the manufacturer system, documentation online or forums that there is probably
    Shortcut keys that enable and disable the touchpad functions.

    Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
    and some come with a utility that loads in the Notification area next to the clock in the bottom right.

    ==========================================

    If necessary: (make sure that you have restarted at least once, if the above did not work)

    Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
    Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
    on the TouchPad and UNINSTALL.

    Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

    This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

    The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
    http://support.Microsoft.com/kb/310575

    Then go to the system manufacturer's website and get the latest touchpad drivers.

    Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • How to view all the files on my computer from big to small

    Hello

    could someone tell me how to view all the files on my computer from big to small

    There should be thousands of them. music movies photos the entire batch.

    THX

    Hello

    I suggest that you sort files by size and check if that helps.

    Reference:

    Behavior and change folder views

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-folder-views-and-behavior

    Work with files and folders

    http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-files-and-folders

    Demo: Working with files and folders

    http://Windows.Microsoft.com/en-us/Windows-Vista/demo-working-with-files-and-folders

    Let us know if it helps.

Maybe you are looking for

  • can I remove the Google app?

    I have the Google app on my Macbook Pro 13 inch Retina. I have just movedd for Mac that allows you to get away from all things, Microsoft and Google. However, I don't find a way to get rid of the Google App. - anyone know how?

  • Password for my HP desktop computer

    I have a PC HP Compaq 8200 Elite SFF Windows 7 Pro Productnbr: XL510AV I can't boot from the network because he asked my bios password. Could you provide me the password?

  • How to set group policy to display the computer name or the IP address for "send to."

    original title: I need a group political templete windows 2003 get the ip address or computer name when you use the "send to" in a shared folder on a server I need a group policy windows 2003 templete to get the name of computer or ip address when yo

  • HKEY_LOCAL_MACHINE SOFTWARE

    Hello I am trying to create HKEY_LOCAL_MACHINE\SOFTWARE\NEWKEY but REGEDIT.exe does not show the new key on this path, instead, it apears on HKEY_USERS\S-1-5-21-3683771369-3266819176-3176474894-2642\Software\Classes\VirtualStore\MACHINE\SOFTWARE\NEWK

  • Bubble Popup MapView

    Hello Simple question to which I can't find the answer to: how to customize the MapView popup that appears when a PIN is selected? I wish I could remove the pop-up button.  I saw the example Custom MapView but that seems to be using an overlay of con