How to nest a polymorphic VI

It is possible to nest a polymorphic VI, or if someone can suggest two ways to reach my goals.

I have several written VI that communicate via a serial port on my device to test. I have grouped into a polymorphic VI selectable by the user. See the left column of my image. I also have a game very similar to VI that communicate with my camera to the test by Ethernet. I've also grouped in a polymorphic VI selectable by the user. (middle column).

I can also make polymorphs of VI that choose automatically based on the question of whether if given a serial port or an IP address. These are displayed as lines on my picture.

I would like to combine these two ideas into one, as shown in the bottom right of my image. The user would choose the 'function' they want and theat would then choose the case VI according to the type of communication.

Is it possible to make this work?

If you want to only series and TCP, then I would consider with VISAS to the TCP calls instead of the TCP primitives. In this way, the code will be the same, and I think that the difference will be in how you build the name of resource VISA.

If this does not work for you, then Mark's suggestion is good, but you should be aware that the OO has a learning curve and it is relatively easy (certainly at the beginning) to make design decisions that you will regret later.

Tags: NI Software

Similar Questions

  • How the nested table that is stored in the database?

    How the nested table that is stored in the database?
    The nested table column is stored with the table main or separate in the database?

    A nested table is a table that is stored in the structure of another table. It is used to support the columns that contain multivalued attributes.

    If you want to use the same type in multiple places, create them on a global scale and these will be discussed under 'Types'.

  • How to remove a polymorphic Virus

    How can I get rid of a polymorphic Virus, itself connected on Internet Explorer 9 and registry keys?  Windows Vista 64-bit.

    Hello

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be harder to detect as
    the cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
    It will display all the infections in the report after you run - if it will not run changed the name of
    TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
    check with the other methods below.
    http://support.Kaspersky.com/viruses/solutions?QID=208280684

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/products/malwarebytes_free

    SuperAntiSpyware Portable Scanner - free
    http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).


    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    -----------------------------------

    Original version is now replaced by the Microsoft Safety Scanner
    http://OneCare.live.com/site/en-us/default.htm

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    ----------------------------------

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    After the removal of malicious programs:

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    ======================================

    If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
    MALWARE IS STILL PRESENT).

    You can try a repair install or an upgrade in Place.

    You can use another DVD that aren't copy protected but you you need to own
    Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
    machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
    good backup or 3 (security in redundancy).

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    =======================================

    For extreme cases:

    Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
    This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
    uses aggressive methods to detect these threats, there is a risk that it can select some
    legitimate programs for removal. You should use this tool very carefully and only after
    you have exhausted other options.
    http://us.Norton.com/support/DIY/index.jsp

    ================================

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    See

    http://www.microsoft.com/protect/support/default.mspx for more details. For
    international information, see your subsidiary local Support site.

    Microsoft support - Virus and Security Solution Center
    http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • How to clean the polymorphic infections

    How to clean my computer polymorphic infections?

    Hello

    1. do you get an error message or error code?

    2. you remember changes to the computer before the show?

    Professional protection antiviruss can use bait files to study the behavior of a virus and evaluate detection methods. This is particularly useful when the virus is polymorphic. In this case, we can do the virus infect a large number of files of the bait. Infected files can be used to test whether an anti-virus detects all versions of the virus. A polymorphic virus infects files with an encrypted copy of itself.

    You can download Microsoft Safety scanner, which provides on-demand scan, and remove viruses, spyware and other malicious software. It works with your current antivirus software.

    See the link below to download Microsoft Safety scanner on the system.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note:

    The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Warning:

    The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

    It will be useful.

  • How to nest items?

    Hi guys, can someone explain to me the mechanics of nesting and positioning? How to make a div? I have create a new rectangle with the rectangle tool and I want to put an element inside. I want to use it as a div. And I put a top object, but it is not nesting. I don't understand how it works. Why when I group items I can not define the type of position for individual items, but for the whole of the Group?

    Just ask in the forum MuseThemes:

    MuseThemes Forum

  • How to nest a slideshow within another widget, such as tabbed panels?

    I would like to add a slideshow inside a series of tabs, as a portfolio of projects that are organized by categories. How can I do this in Muse?

    Follow the steps described in the example of the Katie coffee: using the widget slideshow thumbnails to create a photo gallery

    In this tutorial you create a miniature slide show and embed / nest it in a tab panel widget.

    The steps to create the tabs Panel are included in: adding and customizing the widget by tabs

  • How do nested Movie Clip play once and then stop?

    Hi all

    I was looking for a simple solution to this issue for more than a year. I saw a few solutions

    that work, and lots of questions that remain unanswered questions.  So I thought that I get it from the pros.

    I have a nested clip (image sequence) I use the snippet of Flash CS5 GoToAndPlay.  The Clip

    loops continuously.  How to play once and stop.  I tried the snippet for the stop, I tried

    Stop(); in my layer "Actions".  I tried a stop(); in the last picture of my sequence nested.  I tried a stop to the

    end of the function, but nothing stops this 'thing'. He keeps going and going and going.  This is my typical of the code which

    loops...

    Stop();

    btn3.addEventListener (MouseEvent.CLICK, cd_ClickToGoToAndPlayFromFrame);

    function cd_ClickToGoToAndPlayFromFrame(event:MouseEvent):void

    {

    gotoAndPlay (1);

    }

    btn4.addEventListener (MouseEvent.CLICK, ef_ClickToGoToAndPlayFromFrame);

    function ef_ClickToGoToAndPlayFromFrame(event:MouseEvent):void

    {

    gotoAndPlay (10);

    }

    There are basically two (2) buttons on the page, and the back and the button forward and the sequence of images is nested in a

    video clip, in this case, to frame (1) and another nested video clip to frame (10).  How can I play once and stop

    on the last frame of the clip nested?

    Thank you

    Duane

    You are welcome.

    If my answer has worked for

    you, please indicate your question as answered.

  • How is Nested Comps in new table of current active comp?

    Thank you. Can you please share a function() or idea... to get all nested Comps in a unique picture of current active comp.?

    Am banging my head on the wall to find at least a property where its bound to Nested comp COMP / hand in the project window. I saw "Reveal in Composition" is related to the Parent Comp but no property in extended script guide.

    AFX COMP

    ---------

    MainComp (Precomp (Precomp (Precomp (Precomp)))

    Script

    --------

    var myComp = app.project.activeItem;

    var myLayers = myComp.layers;

    var allComps = new Array();

    for (i = 1; i < myComp.numLayers; i ++) {}

    curLayer = myLayers [i];

    If (curLayer.source instanceof CompItem == true) {}

    allComps = function getAllNestedComps (?);

    }

    Try this:

    function getSubComps (theComp) {}

    for (var i = 1; i)<= thecomp.numlayers;="">

    If (theComp.layer (i) .source instanceof CompItem) {}

    allComps.push (theComp.layer (i) .source);

    getSubComps (theComp.layer (i) .source);

    }

    }

    }

    var myComp = app.project.activeItem;

    var allComps = [myComp];

    getSubComps (myComp);

    Dan

  • How a nest a sequence in first?

    It should be as easy as right-click on it!

    that would make some sense, where we have the ability to restore non-rendus... but with nests being may be full of runs, it might be too messy.

    You can either open the nested sequence, so that it opens in a new timeline. then copy and paste it into the original/main scenario. or drag the nested sequence from the tray to the source monitor, and then in the timeline toggle disable the button "insert and replace sequences such as nests or individual clips". then drag the item from the source to the timeline window or use the command/button replacement.

  • How to nest include the function in the chncalculate

    That's what I want to do

    I use the following formula where aw (t) is stored in [1] / channel FrequenceEvaluation

    Call ChnCalculate((ChnIntegrate("Ch(""[1]/Time""),Ch(""[1]/FrequencyEvaluation"")^4,Ch(""[1]/VDV"")"))^0.25)

    Hello GDU!

    I recommend you to separate the parts calculation. This will reduce the risk of some mistakes you have made.

    Calculation steps:

    1. Use ChnCalculate to generate an aw (t) ^ 4 channels
    2. Use ChnIntegrate on that channel
    3. Calculate the result ^ 1/4

    In general, it is not possible to use the calculation of string functions in an expression of ChnCalculate . The reason is that ChnCalculate evaluates its expression on all values in one channel. Across the canal to calculate functions will process all of the channel and writes the result to a new.

    Matthias

  • Help! -How to create compositions nested with suites CEAP

    I want to be able to create a nested composition... I know that when you create, let's say, comp 1, then another comp 2, then drag comp2 in ordi1, in comp1, comp2 become a layer. COMP2 would be called a "precomposition".

    So, I want to be able to do that in my program, using ECAP calls... I tried just to add a composition as a layer to another composition (parent), as images are added as a layer to the current model.

    There was another post that talked about using the rest of the Collection, but I don't know how to really use it to implement a nested model.

    I tried to get a collection of the model, I want to be nested, selection of the current model (parent) setting to have a collection of the model nested and tried the DoCommand (2071) for you need to precompose collection, but obviously it does not work because it is not really wise to do, haha.

    Intuitively, I wanted to call the AddLayer of the current model, by passing in a mock-up of the child to add as a layer. Adobe told me that point can be made up to the layer source so the way to do this has to be more subtle than I thought.

    If I have to use collections, I do a collection out of the current model and add future publications to the collection? That does not make sense either. How a nested model is added as a layer to another comp?

    Can anyone help me? Email me if you have any suggestions: [email protected]

    Thank you!!

    Hi Sara,.

    I replied to your email, but just follow the Forum:

    Say that you have created two compositions using AEGP_CreateComp.  This gives you two AEGP_CompHs.  To nest a computer in another, you will first need to get the AEGP_ItemH for the nested model, so use the AEGP_GetItemFromComp.  You can now add the AEGP_ItemH of the model nested as a layer using AEGP_AddLayer.  That should do the trick.  And AEGP_ReorderLayer if necessary.

    See you soon,.

    Zac

  • With tables nested loops

    It's my current and outer cfloop. How many nested cfloops do I need to go on field data.current_version.en.text ? My guess is two loops, but I'm not sure about specifying the value for the 'to' in the cfloop.

    < cfif structKeyExists (cfData, 'data') >

    < cfoutput >

    < cfloop index = "i" = "1" to = "#arrayLen (cfData.data) #" >

    #cfData.data.searchTitle.en # < h1 > < / h1 >

    #cfData.data.current_version.en.text # < p > < /p >

    < / cfloop >

    < / cfoutput >

    < / cfif >

    And this is what looks like the struct.

    ColdFusion-Array.png

    OK, got it working.

    #cfData.data [i] .name #.

    #cfData.data [i].current_version.en.text #.

  • Character - nested character Style?

    Question: I have one in brackets at the end of each of my sentences I want to apply a style nested in.

    What I currently have:

    Example with an applied paragraph style sentence. (In brackets at the end of my sentence)

    How style nested so it looks like this:

    Example with one sentence applied paragraph style. ()Nested Parenthetical at the end of my sentence with a character of the bracket with the bracket style)

    Apply any up to 1)

    You can then apply the style of character through 1) through 1 sentence, or through character 1 end nested style, or something else that does not exist.

  • Are there negative consequences for instantiating a CFC of in another CFC? (i.e. CFCS nested)

    Hello CF super hero.

    I'm messing with CFCS and I ran into a situation where I would start calling some CFC methods of in an another CFC (nesting).  My first instinct was to simply instantiate the CFC of belonging to the parent CFC level but I don't know that ColdFusion would like it if I nest like that CFCS. I read about some people getting the dreaded "null null" error at times.

    I am aware of the property "spread" in the < cfproperty > tag but the problem is that you end up having instantiate the CFC extended in the calling CFM template anyway.  It seems that it is just easier to call CFCS from in the CFC that will need to be "delayed".

    For example, here's what I think to do:

    In my template main index.cfm:

    < component cfobject = "MasterCFC" name = "cfcs.master" >

    < cfset temp = masterCFC.myFunction () >

    Then in master.cfc:

    < cfproperty >

    <!-get my sub cfc->

    < component cfobject = "SubCFC" name = "sub" >

    < cffunction... >

    < / cfproperty >

    In the opposite case (if I understand correctly) if you want to use the property "covers" you'd have to do it like this:

    In my template main index.cfm:

    < component cfobject = "MasterCFC" name = "cfcs.master" >

    < component cfobject = "SubCFC" name = "cfcs.sub" >

    < cfset temp = subCFC.functionFromMaster () >

    Then in sub.cfc:

    < cfproperty extends 'master' = >

    < cffunction... >

    < / cfproperty >

    I would like to know your opinion on how you nest CFCS or "extend" effectively.

    Dave

    G ' Day Dave

    There is no trick here. To invoke a CFC method, you follow these steps:

    And it does not change if yer in a CFM or a CFC.

    So given this requirement:

    The answer is:

    One thing to watch here is you need to VAR your variables in your methods, otherwise they are global to the CFC instance, rather than local to the function.

    --
    Adam

  • A stageX, stageY property to MovieClips - how are you?

    Get the absolute position of created in a dynamic way, moving MovieClips can be a real pain, especially if you use radomization and don't know where or how deeply nested they spawn.

    LocalToGlobal function can make your code really unreadable, so I tried to come up with a feature that would give me access to any position of the Sprite/clips on the scene anywhere.

    Type of a property have certain events (stageX, stageY).

    Basically, my goal would be to have no localToGlobal/GlobalToLocal conversion in my document class, but do it all inside the bodies themselves.

    What I have so far:

    import flash.display.MovieClip;

    to import flash.geom.Point;

    var _nestLevel:int = 0;

    var l:int = 0;

    var parentList:Array = new Array();

    getAbsolutePoint (this);

    function getAbsolutePoint(_mc:MovieClip):void

    {

    If (_mc! = MovieClip (root))

    {

    _nestLevel ++;

    getAbsolutePoint (MovieClip (_mc.parent));

    }

    on the other

    {

    While (l < _nestLevel)

    {

    l ++ ;

    parentList.push ("parent");

    trace (ParentList);

    traces correctly according to the nesting level (parent, parent, parent)

    }

    This will raise an error 1010

    trace ("Global coords:" + _mc [Properties] .localToGlobal (Point (_mc [parentList] .x, _mc [parentList] there)));

    }

    }

    Any ideas how to make this work?

    If you answered Yes, and the final version is 0.0, you can use returnF to return the position of movieclips compared to the total reference:

    var stageX:int = this.x;

    var stageY:int = this.y;

    defineF (this);

    function defineF(mc:MovieClip):void {}

    stageX += mc.parent.x;

    stageY += mc.parent.y;

    If (mc.parent.parent is MovieClip) {}

    defineF (MovieClip (mc.parent));

    }

    }

    function returnF (): Array {}

    return (stageX, stageY);

    }

Maybe you are looking for