How to nest include the function in the chncalculate

Similar Questions

• List of Figures: How to not include the figure discription?

  Hi, I'm writing my thesis for a Ph.d. student, and I have a very specific requirement for figures and Figure legends and tries to use the automated features of InDesign to help me. I know it must be possible, I don't know how. Here's the situation:

  I need to have a figure which is subtitled as follows: 'Figure 1.1 products chemicals used. This figure illustrates the structures of chemicals...» In which 'Figure 1.1' is the number of digits, "chemicals" are the title of the figure, and the rest of the text is the real legend. I need them to be, as shown, in the same paragraph (IE not on separate lines). I have about 100 numbers. I learned how to set a list and then set legend style to use the list so that the figures are numbered automatically. Here's the question:

  Then I need to generate a list of Figures (similar to a table of contents) which lists each figure in the following format:

  Chapter 1. Introduction

  Figure 1.1 chemicals used... 1

  Figure 1.2 made molecules... 2

  In which the number and title of the Figure are reported in the table of contents, but the figure legend text is not. I was able to understand a little about how to set up the table of contents report on more or less in the format I need to (although I still have to solve what I mess up), but the real problem is that when I automatically generate the table of contents, it includes the text of the entire legend. It is because in the legend of the origin, the text and the title and number are all one paragraph, so when I fill out the table of contents based on a definition of the paragraph, it fills with the whole paragraph.

  Two things I can think that it can solve are if I can) 1 defines two different paragraph styles in the same paragraph or 2) fill a table of contents based on a character instead of a paragraph style style (then I could define just the number and title as a certain style and populate the list with it.)

  Anyone out there have the solution for me? I clearly have a familiarity with the program (I went through all the class in a book in the last days), but am no expert. Your advice and assistance will be greatly appreciated!

  LunaKT wrote:

  "* If there are too many titles figure for the approach described above, you can insert a nested here at beginning and end of each caption Style end character (example: this figure shows blah)." These characters of width zero invisible are preserved in a generated table of contents. Modify paragraphs in the table of contents entry to include a nested style is none until 1 end nested here Style and a character style placeholder Style nested here until 1. The character style must not have any visible properties.  Create a condition. Set up the table of contents, then select include a full paragraph.  Once the table of contents are generated, use find/replace to find the placeholder style character and replace it with the State. Then, hide the condition. "

  There are too many titles (some of them, a lot of long words) figure for the first approach.

  Maybe I didn't explain it clearly enough. The way I understand you description, your auto numbered paragraphs start with a figure title, a short sentence as chemicals used, created molecules, etc.. This title is followed by a longer text, that you seem to call the legend text.  I think you want to extract the end of automatic and numbering introductory paragraph for the TOC. You found that InDesign cannot separate the parts of a paragraph to the TOC process. You also found that InDesign cannot easily put two paragraphs on the same line, so your disposal presents a dilemma.

  There were descriptions of how to put the two paragraphs on the same line on these forums, so try searching on Google for "InDesign two paragraphs on the same line," 'Zero InDesign space before paragraphs' "InDesign negative space before paragraphs," and other similar expressions, without quotes. (Google searches find topics in these forums and other resources outside of Adobe).

  The method of image inline was mentioned in another post on this thread.

  as for the second, I'm still pretty new to this program I think I follow your logic, but will have to play a little to make it work. As a solution, it seems viable, but I am really surprised that InDesign doesn't have a feature for this built in - I think that this kind of situation would be pretty common.

  FrameMaker has the opportunity to present two or more independent paragraphs on the same line. The so-called "break-in" paragraphs they are essentially the paragraphs with a "carriage return" but no line breaks. You can post a formal request to incorporate it into a future version of InDesign to https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform.

  If you have the time, do you think you can only simplify/clarify this explanation a bit more? I follow your logic, but am not following how do a space character reserved up to 1 nested Style to end of style here. (Literally, I can't know which menu to open and what to do in order to complete this statement)

  Thanks for your thoughts.

  "Style of placeholder characters" may be a term that is too vague. I wanted to say that you need a character style that is not what anyone other than to identify the text to which you want to apply a condition, so that you can hide text in the table of contents extracted, by hiding the condition. The condition does not change a text property, although you might want to temporarily give a different text like a color property or "BOLD" when you set the nested style, so you can immediately see the result. After you've proven configuration, remove the property changed the character style.

  Nested styles are created in the balls and Nested styles from the paragraph Styles panel Panel. Read more about nested InDesign using paragraph styles. You can simplify the insertion of markers end nested Style here using the quick apply feature. Him to the position of the text insertion point where you want to insert the marker, press Cmd + enter on Mac or Ctrl + enter on Windows, to open the quick apply dialog box. Type "here" without the quotes in the text entry box to view and select the command "Nested at the end Style here". Press ENTER to insert the marker and close the dialog box. Move the cursor to the next position, press Cmd / Ctrl + Enter again. Apply quick should redisplay and highlight the last command, "End Nested Style here." Press ENTER. Etc. Another approach is to select and copy the marker, then paste it where you need it. If you do not see the marker, turn on Type > show hidden characters.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• How can I include the picture number when using 'Export Frame'?

  IM using the button at the bottom right of the Panel of reading called "Export".  That's exactly what I need, but I have a lot of unique need frames and image export. How can I get the name of the file to include the image at the end of the file name automatically?

  For example, instead of her show "Séquences 01.Still001" by default.  I want to only show 'Séquence 01_0001' let me know what framework 0001.

  It's possible, correct?

  If you export the timeline, you get the number sequence timecode.

  If you Match Frame and export of the Source monitor, you get the timecode of the video under the number.

• How can I include the header of the table of contents in the table of contents?

  I prepare a table of contents in InDesign CS3 (Macintosh OSX 10.5.8)

  I added all the paragraph styles to the list of paragraph styles, I have want to appear in my Table of contents.

  However, I would also like the table of contents itself appear in the table of contents:

  In the case of the table of contents is placed on page 3, he want it looks like this

  Table of contents:

  Title page... page 1

  Thanks... page 2

  Table of contents... .page 3

  Table of figure... page 6

  Chapter 1... page 10

  and so on...

  I have included the paragraph style in the list of paragraph styles, I want to have in my table of contents. But this does not have an entry in my table of contents that is named "table of contents".

  I would be grateful for any advice.

  Thanks in advance

  To do this add a nonprinting frame to Page 3 and add the words Table of contents using one of your styles that is picked up.

• After you have installed the 'Puzzle', it is not included in the menu click right when I open a photo, how can I include the add-on in my right click menu?

  I installed the add-on puzzle 0.4.6 which is supposed to add the issue of "Puzzle" to the context menu, but when right click on an image it does not give the option to open with the add-on puzzle.

  Make sure you do not right click on a background image.
  
  You should see a backup image and view image if this is a real picture.

  You can try to click with the right button on your avatar.

• How can I include the site in the bookmark icon, they are all blank when I bookmark on a page

  I can go and change the icon to add third party icons I had besides for the site to my bookmark listings, however, I can never get the real icon for the site itself attached to the bookmark. A list of icons hidden outside, it is difficult to analyse when I'm looking through my favorite sites.

  • CheckPlaces: https://addons.mozilla.org/firefox/addon/checkplaces/

• How to find - including the table - the data insertion

  Hi all

  We have oracle 10g need to table name which records the last "data inserted the name of the table.

  Any help on this query,

  Thank you

  My understanding is correct

  1 sales man Insert customer details

  2. this information is stored in a DB with 200 + tables

  3. sales manager need a report for review and approve the details of the customer entered by sales man.

  4. you are asked to prepare this report

  5. you have no idea of what are the paintings to study to get information

  If this is true the correct way is the look in the design of your application document.

• How can I include the 'Head' section in a model in CS5.5 so that I can put a different title on each page, etc.

  I built a new model with a header and a footer.  I created the edit box, but when I use this model, nothing in the header is editable

  If your DW Template.dwt file contains valid code, it must automatically contain an editable region for the

• How can I include the Session MM_Username in a link?

  Greetings:
  
  I would like to have a link on a page, such as 'Show my homepage' with the underlying link, in fact, being in the form of 'Username.php' where the user name part will change based on the user who is logged.
  
  In the link properties field, I tried everything I can think of. Can someone help me with what to put as the syntax in the link field, to make it work please?
  
  Thanks in advance for the help.
  
  Glenn

  GEAtkins wrote:
  > Greetings:
  >
  > I would like to have a link on a page as 'Show my homepage' with the
  > underlying connection actually to be in the form of 'Username.php' where the user name
  > part will change based on which a user is connected.
  >
  > In the field properties link, I have tried everything I can think. Peut
  > can somebody help me please with what to put as the syntax in the link to field
  > this work?

  Open the bindings panel, click on the + button, select the Session. In the dialog box that appears, enter MM_Username (use the case used on the page connect where this value is defined.

  Add the following code to your page:
  My personal page

  Mode code, in the bindings panel, drag the MM_Username entry in the link you created, and then drop it between the "and." in ".php". Must be set on the go.

  I hope that you protect everyone username.php page so that someone can not simply type this value in if they are already connected to your site. A much better way to do it would be to have a single page and have this page out content that is filtered by the value of the session MM_username.

  --
  Danilo Micen
  | Knowledge stretching every day: http://CommunityMX.com/
  | Adobe Community Expert

• include the shortcut in package

  We test the Thinapp solution and of the DBMS is a customer navision Ms. We need to specify a server name and temp file locations when we start to the customer. So we used to specify this information in the shortcut properties. How can we include the short in the package so that the settings are kept in the package.

  You can accomplish this by using the command line parameter =...

  Here is an example:

  [Mozilla Firefox (Safe Mode) .exe]

  Source=%ProgramFilesDir%\Mozilla Firefox\firefox.exe

  Shortcut = Mozilla Firefox.exe

  WorkingDirectory=%ProgramFilesDir%\Mozilla Firefox

  CommandLine="%ProgramFilesDir%\Mozilla Firefox\firefox.exe" - safe-mode

  Shortcuts=%programs%\Mozilla Firefox

  Basically, you use: CommandLine = "SameAsYourSourceParameter" AddAnyParametersNativeApplicationSupports

• Include the user in report currency

  Hello
  
  I want to know how I can include the code of the user who is signed in currency in the report.
  Is there a session variable, that I can use for this?
  
  Kind regards
  
  Ingeborg

  Hi, try VALUEOF (NQ_SESSION. USER_DEFAULT_CURCY)

  -John CRMIT

• How can I include jquery.js in my application

  Hello

  How can I include the JQuery.js (it is a local resource) in my application that I can use the appeal of $.ajax? I have to add something to my config.xml file or simply include it as usual in my .html files?

  Thank you

  If all you want is supported ajax with jQuery syntax can I humbly recommend Zepto

• How the SUM cells including the text and the number?

  Hello world

  Someone can tell me how the SUM cells include the text and the number?

  1 Bob 20

  2 30 Jane

  3 50 Jame

  Total 100

  Thank you

  Hi Jordan,.

  If the numbers are not always two digits, FIND the position of the space between the number and name:

  

  Formula in B2 (fill down)

  = FIND("",A2)

  Then use the LEFT function to get the number in the column C:

  

  Formula in C2 (fill down)

  = LEFT (A2, B2)

  This will give a text string (Tip: left-aligned).

  Convert to a numeric value in the D column with the VALUE function:

  

  Formula in D2 (fill down)

  VALUE = (C2)

  (Tip: propped right)

  Table 1 has a header row and footer of the line, and the SUM is easy. Formula to the D8 footer line:

  = SUM (D)

  Kind regards

  Ian.

  Edit: You can hide columns B and C

  

  Ian.

• What is READ the array returned by the DAQmx meter? How can I know the two functions DAQmx READ data stream in the same WHILE loop?

  I have a question about the order of execution.  In the WHILE loop, I have two things to measure, period and tension using the DAQmx READ functions for voltage and the meter.  In the end, I want to collect these data as points almost simultaneously as possible, as a pair and then send them together to another piece of code (not shown here) which them will result in some sort of command for an engine.  It would be run, and then I want to perceive the tension and the period at a time later and do the same thing.

  (1.) I'm a little confused on what the meter of the READ function is back because it's a table.  What is a picture of?  I thought that it was up to the value of the individual periods between rising edges.  The output of the counter 1 DBL d's a table. How many elements in this table, and what determines the size of this table?  Are the elements of the array the individual delays between the edges?  How many values are stored in the array by executing?   We take the AVERAGE of the last 15 items, but do not know if we are throwing some of the data or what.  How to understand the composition of this painting?  How can I change the composition of this painting?  Is it possible to measure only one period at a time, for example the time between TWO edges?

  2.) Will this WHILE loop execute as it gathers tension and a "period table ' (remains to be understood by me) by TIME running in a loop?  In particular, we want that the value of the tension associated with the value of the AVERAGE of the period "array", so we can use two data items to create orders of next control every time that the two values are reported.  The structure for the delivery of vi will be attached data in pairs like this?  I understand that one of the READING functions run not before the other function of READING in the WHILE loop.  I want that the period "means" and "strain (Volt) collected at the same pace. This vi will he?

  Thank you

  Dave

  Hi David,

  I suggest including the DAQmx Start Task function. If it does not start before the loop, it starts the loop and work very well, but it is not as fast and efficient. In the model of task status, task wiill go to run the checked each iteration of the loop and then back the time checked running when it restarts.

  The status of the task model: http://zone.ni.com/reference/en-XX/help/370466V-01/mxcncpts/taskstatemodel/

  Kind regards

  Jason D

  Technical sales engineer

  National Instruments

• How can I include all the VI that are listed in the hierarchy of VI for a source distribution

  I'll send my request to another developer. To do this, I used the source distribution function. But if I generate the files I miss the VI they are stored in the form of instrument drivers. How can I include, too?

  Walter wrote:

  I'll send my request to another developer. To do this, I used the source distribution function. But if I generate the files I miss the VI they are stored in the form of instrument drivers. How can I include, too?

  This is exactly yhe reason I'll go through and save screw driver to subfolders in my application directory. In this way, I can keep the NCC updated with a complete set of code including any mods, I do the driver (usually change of reentrancy).

  But if you don't take this approach, you will have to send you a colleague from the same packeage installing driver allowing you to put it on your machine.

  Ben