How to obtain user guide and the use of the ExpressCard Mobile HP Media Center remote control

Similar Questions

• Windows Media Center learned remote control cable, cannot recognize the Windows Media Center remote control

  Running Vista Home Premium 64-bit.  I rent a cable box so I can get some programs at the 3-digit level.  When I've set up my Windows Media Center (WMC), WMC learn successfully the cable box remote 1 - channel upward.  My problem is the next step and change the channel using the Windows Media Center remote control or keyboard.  My keyboard or the WMC remote will change the channel.

  I got Windows Media Center to re - learn the cable box remote control twice, which is always successful, but again once, when the time comes to use the Windows Media Center remote control or my keyboard to change the channel, the channel does not change.

  Could someone please help me with this?  Thank you in advance.

  Hey kansascitykid,

  If you receive your TV signal through a set-top box and Media Center is unable to change the channel, or it changes channels incorrectly, check the following:

  ·        The infrared diffuser is connected to your remote control receiver. If the infrared diffuser is not connected, Media Center cannot send a signal to the set-top box to change a channel.

  ·        The infrared diffuser is well positioned at the front of the set - top box. If you are having trouble placing the IR blaster on the set - top box correctly, try to use a flashlight to locate the signal on the set - top box receiver.

  ·        IR control codes are configured correctly. If constantly changing channels, control IR codes may not have been configured correctly during the installation of TV signal. To reconfigure your TV signal, on the Windows Media Center start screen, highlight toTasks, clickSettings, click on TV, then clickSet up the TV Signal.

  • Center cannot send a signal to the set-top box to change a channel.

  More information here: problems with watching TV on your computer

   

  Also have a look if you find useful suggestions in this thread.

   

  Microsoft Media Center remote with pace DC50X 1039, Setup box cannot change channel

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Where do you buy the media center remote control?

  Where do you buy the media center remote control?

  Hi John,.

  What operating system is installed on your computer?

  You can buy the remote control for Windows Media Center of Windows Store:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  Reference: use a remote control with Windows Media Center

  Hope the helps of information.

• Just upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.

  after update to XP media center units Vista remote control

  Just upgraded to Vista Home Premium to XP.  Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.  I checked the usb driver for the usb XF-10 rf remote receiver and it is fine, uninstalled and reinstalled it.  Handset was working fine a few days ago.  I also went in 'Administrator', 'services' and then active HID, but it still does not work.  Media works well, but it would be nice to have the operation of the remote control!  Not particularly computer, simply suggestions please!  Thank you, Nick.

  Hi Nicolas,

  I suggest you to check the battery. Additionally, make sure that you have installed the right drivers for you Consumer IR Port.

  For more information, you can check the link below,

  http://www.PackardBell.com/index.html

• The user guide and the Support Page at launch?

  Depending on how you define a product launch (or how many different "spear" in how many different places) it's time to make the section and support pages available user guide?

  Our site now is here.

• Manual or how to use the ExpressCard Remote control Mobile HP Media Center

  My HP Pavilion dv7-1448dx-product # NV213UA #ABA.
  I'm running Win 7 Ultimate x 64 OEM.

  I searched HP and found 1 photo of my card ExpressCard Mobile HP Media Center remote control, I found all the descriptions of component and everything BUT how to use it?

  Where can I get information on how to use the "card ExpressCard Remote control Mobile HP Media Center"?

  Deborah M souls.

  Deborah M souls

  Hello

  Are you talking about the next device? How to install and how to use information is here:

  Express Card Media Center

  Kind regards.

• Cannot download the user guide or the software from the Linksys site.

  I am trying to get the user guide and the firmware on the linksys site and get "file not found".

  In fact, almost all of the links does this!

  Browser is Firefox (last) in a XP box.

  Tried chat (what a joke!) and after 30 minutes they told me that my device was 'out of support' and gave me a link to the site I was already on. After trying this link (just for completeness) and get the same "file not found", they guy says the site does not Ant to try later.

  Tried this morning with exactly the same results.

  Someone has ideas of what's going on here?

  Thank you!

  Harvey in Victoria, Texas.

  Go here - http://www.linksysbycisco.com/APAC/en/support/WAP11/download

  His works now.

• I forgot my icloud user name and the password, my ID apple won't do me in my phone how to lay or clear everyhing so that I can use my phone again?

  I forgot my icloud user name and the password, my ID apple won't do me in my phone how to lay or clear everyhing so that I can use my phone again?

  https://iforgot.Apple.com/password/verify/appleid#! & section = password

• Difference between the implementation guide and the user guide.

  Hi all
  
  I'm a fresh graduate, I wanted to just know what is the difference between the implementation guide and the user guide.
  
  Sorry, the question may seem simple, but I'm not aware of the merry.
  
  Kind regards

  Hello

  The implementation guide is the reference that you can use to make functional configuration so that the user guide covers how the module/application navigation and tells you how to use it.

  Thank you
  Hussein

• How to display the user id and the session on the form?

  Hi all can someone guide me how to display the user id and the session on the form? Please guide me
  
  Sarah

  Hi Sarah,.

  You can use GET_APPLICATION_PROPERTY (CONNECT_STRING) for this.

  BTW, have you tried search in forms online help? It has good examples explaining all the built-ins.

  Arun-

• When I go to a favorite websight how can I get the user id and the password to open the view without having to put in me? Barry was soon

  When I go to a favorite websight how can I get the user id and the password to open the view without having to put in me? Barry was soon

  Hi Barry,.

  Please contact Microsoft Community.

  It would be great if you can answer the following question:

  What browser you use on the computer?

  If you are using Internet explorer, I suggest you to follow these steps to turn on the AutoComplete feature and check if it helps:

  (a) open Internet Explorer.

  (b) click on the Tools button and then click on Internet Options.

  (c) click on the content tab.

  (d) under AutoComplete , click settings.

  (e) check the address bar, Forms, usernames and passwords on formsand ask me before saving passwords check boxes.

  (f) click OKand then click OK again.

  Let us know if this can help, and if you need further assistance.

• I want to download the User Guide for the Apple TV user guide.  How can I do?

  I would like to download the User Guide for the generation of Apple TV User Guide 4.  Impossible to do on the Apple official site.  East - intentional; and if so, is there another way to download this User Guide?

  Hi you have this internet guide http://help.apple.com/appletv/

• How can I remove the user name and the image of Windows XP new Start Menu

  Two questions:

  1. How can I delete the user name and the image of Windows XP new start; and

  2. my computer keeps asking me to press the F1 key to start Windows.  How to skip this part?

  Thank you.

  Hello

  The image of user account can be removed by disabling the Welcome screen. Or, by opting for the classic Windows theme. Follow the method described in this article, if you want to remove the user name and the picture in the Start Menu, without disabling the Welcome screen and Windows XP theme.

  For those who want to delete the user name and the image of user account from the Start Menu, in order to have a blue white Panel at the top, try this:

  Registry warning
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Step 1:

  a. start Windows Explorer and go to this folder:
   
  C:\Documents and Settings\All Users\Application Data\Microsoft account images

  b. in this folder, rename the BMP file that corresponds to your user account.
   
  (For example, if your user name is Robert, rename Robert.bmp to old_Robert.bmp)

  c. then rename the following folder:

  C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\Default pictures
   
  to something else, for example,.
   
  C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\No_Default images.

  Step 2:
   
  To remove the user name, follow these steps

  a. Click Start, click "RUN" and type "regedit.exe" and navigate to this key:
   
  HKEY_CURRENT_USER-Software-Windows Microsoft\------CurrentVersion-policies-Explorer

  b. in the right pane, the value NoUserNameInStartMenu-value data 1.

  c. close Regedit.exe and restart Windows.

  You'll find yourself with a blue area at the top of the Start Menu.

  Regarding the pressing 'F1' to start Windows, you have made no changes or was there a system crash after which the problem started?

  You may need to change the boot sequence in the BIOS to the default settings. I recommend you contact your PC vendor for this.

  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Why the fast user switching and the new Windows Search use the Terminal Services?

  Recently, I was struck by a piece of really bad, malicious malware that totally trashed my operating system.  Therefore, as I rebuild my system, I am applying the appropriate safety precautions.  Among the recommendations of Microsoft is to reduce your footprint of security by disabling unnecessary services.  One of these services that I thought I didn't need was Terminal Server services, since it is a way for a person to get to my machine remotely.

  It turns out that, however, other services that I want to use, such as Fast user Switching and window new search utility, depend on the Terminal Server Services.  It makes no sense to me from a safety point of view.  This seems to be a bad design decision, because security trumps utility.

  If Microsoft is listening, I would like to know why you made this decision and you have changed in Windows 7?

  Second, is there a way to always have the Terminal services Server running and at the same time cut access remotely through this service?

  I don't know about the 'new' Windows Search, but what about the fast user switching you ask to run several sessions of Windows when you switch between users (a session for each user connected) and the only way that Windows can do is to act as a quasi Terminal Server, it needs Terminal Server services to run multiple sessions.

  John

• How to use the NEW BLACK xbox 360 media center remote with Windows 7 Ultimate & Windows Media Center

  I have the new Black xbox 360 media center remote and I can not understand how to use it with my PC to run windows media center. I'm running Windows 7 Ultimate x 64, and I also have the receiver wireless for my xbox 360 wireless controllers.

  Here is a link to a better image of the remote control.
  Here is a link to my xbox 360 wireless receiver.
  I also have a mini receiver RF for a keyboard and a mouse if that helps somehow.
  I don't have an xbox 360, but I like to use my controller wireless for my PC games and emulators like the style and color of this remote it would go well with my current setup as well as with XBMC.
  If anyone knows or can help me to find a way to make this work I would appreciate it a lot.
  Thank you
       
  Michael

  Hi Michael,

  Thanks for posting your question in the Microsoft Community.

  The question you have posted is related to the Xbox 360 and it would be better suited to contact Xbox support to obtain assistance from the links below:

  Contact XBox Support:

  http://support.Xbox.com/en-us/contact-us

  http://support.Xbox.com/en-us/browse?product=Xbox-360

  I hope that the information above helps you.