How to open a 930e Logitech webcam


I just bought the webcam logitech 930e thinking I could just connect on my iMac and an icon on my desktop, but nothing!

I feel so dumb on this matter since now I do not know how to open the cam and get started. I need anidiots guide for this, if anyone can help.

I use an iMac running Yosemite

Did you open Skype, Facetime, Photo Booth, etc to see if the camera is available for selection?

Tags: Mac

Similar Questions

  • How to operate the Satellite L500 webcam?

    How to open and operate a webcam Toshiba Satellite L500?

    Start preinstalled web Application camera and you have control over the webcam.


    I have windows vista and I have a logitech webcam, I know how to take pictures, I don't know how to save an email and send pictures of the webcam.

    I use an HP webcam. Maybe what I'm saying now will throw somelight to your question.

    After the photos have been taken > start button > Search box, type webcam media, press ENTER> uac prompt > right click on the Webcam media folder in the next window, click OPEN > there are photos. I can highlight all, right click, click on MOVE TO > navigate to a folder of my choice > click MOVE.

    Now, I can e-mail them the normal way.


  • How can I activate my internal webcam? HP Pavilion g7 series [redacted] product LF156UA #ABA

    How can I activate my internal webcam? HP Pavilion g7 series [edited by moderator product LF156UA #ABA

    Click on Start button and type "Cyberlink YouCam" to search and youcam software open search results to activate the webcam on the laptop

  • I installed a logitech webcam, and everytime I go to use it with windows messenger it stops and says that there is a problem

    I installed a logitech webcam on my computer and everytime I go to use it on windows messenger, MSN messenger stops and also I'm unaable to use yahoo messenger.

    Hi LindaKeippel,

    1. what operating system do you use?
    2. what happens when you try to use yahoo messenger?

    Method 1
    I suggest that you set the computer to the boot and try to use the Messenger. The following link will help you configure the computer to boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Note: Put the computer into normal mode.
    A. Click Start, right-click computer and then click on manage.

    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

    B. in the console tree, click Services and Applications and then click Services.

    (C) in the part of details, right click of Windows Installer and then click Start.

    Method 2
    If the steps above fail, I suggest you to reinstall the drivers from the manufacturers Web site, the following link will help you to reinstall the drivers.

    Updated a hardware driver that is not working properly ' t-work correctly

    Method 3
    Once you reinstall the drivers, I suggest you run the windows updates again.

    Install Windows updates

  • Impossible to uninstall Logitech Webcam Software

    I have Windows XP sp3, IE8 and all updates. Except 3 Logitech webcam C615 updates that all 3 failed to install with the same error code 0 x 80070103.  I have installed and uninstalled my software of Logitech C615, drivers and all a few times, hoping to redo the programwork. The program worked the first time I added it perfectly for almost a week, then without my knowledge at the time I had 3 virus severe threat (which I've taken care of via MSE) a week or so later when I discovered it. I don't know if this is related, but the screen would go black and dead when we tried to use the webcam, it does simply not at all. It's weird that on the same day I've updated these 3 updates failed was the day that I got the virus. So, I uninstalled the program overall, thinking the problem was the webcam and re-installed. It's the same thing, and Yes, the drivers were very good. I had yet to understand and fix the virus. So, I uninstalled it again. Still it wouldn't work. Then, viruses have been found and fixed. Now, here is my current problem. I'm trying to uninstall the Logitech Webcam Software C615 Ain Add/Remove Programs, and it will not uninstall! I '; worm tried and tried. Whenever a screen that is supposed to appear and ask you what parts you want to uninstall tries to ride, flashes briefly and then disappears, leaving me unable to uninstall. I tried the fix from Microsoft, but it without success. All parts of the program that I finally tried to do an unintall advanced disappeared (I think) except the software part. Help! Thank you!            KinaPO


    1. What is the full message of error/popup?

    2 have what Microsoft Fixit you tried to solve the problem?

    3 What problem confined to a specific program? You are able to uninstall other programs?

    Looks like some third-party programs is blocking. This can also occur if the computer is still infected with a virus.

    Method 1:

    I suggest to run the Fixit and try to uninstall the program manually.

    Solve problems with programs that cannot be installed or uninstalled

    If you have already tried, you can proceed to the next method.

    Method 2:

    Put the computer in a State of boot is a way to know which application is causing this problem.

    To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

    Step 1: Follow the steps in the link below to do the same thing:

    How to configure Windows XP to start in a "clean boot" State

    Note: After troubleshooting, be sure to set the computer to start as usual as shown here:

    Step 2: To configure Windows to use a Normal startup state

    After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

    a. Click Start and then click Run.

    b. type msconfig and click OK. The System Configuration Utility dialog box appears.

    c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

    d. When you are prompted, click on restart to restart the computer.

    Method 3:

    Run a scan antivirus on your computer.

    Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

    If the problem persists, you can report the issue in the Logitech forums for more information:

    Hope this information helps.

  • I'm missing device of my drivers for logitech webcam c260 image in Vista

    How do you get the device image in my drivers, I am trying to install logitech webcam c260 on my comp. and it won't allow me to install properly without image... Please help! :(

    The best place for loicate and install drivers for your computer is the site of the brand of your webcam. That is to say"Logitech. I also find the drivers I need Microsoft If your webcam is still under warranty, there should be no charge for Logitech to give you the halp you need for pilots. Sometimes, you can send the manufatuer to your computer, they will often have additional information for you, but there may be a fee for this service. Hope this was somewhat helpful. :))

  • How can I install my Logitech USB QuickCam E2500 with model V - UCV 39 number to windows 7 operating system

    How can I install my Logitech USB QuickCam E2500 with model number V-UCV39 for the Windows 7 operating system, thank you

    According to this page, you just need to download and install the latest version of the Logitech Webcam software. Want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.

  • Compatibility of Logitech Webcam

    The Logitech Quickcam Webcam Chat list model No.: 961462-0403 as compatible Windows 7 64 bit.  I don't see anywhere that Logitech would agree with you.

    Logitech Webcam Software (LWS) with Vid 1.1 x 64 seems to work,
    but Quickcam Chat Webcam
    Model No.: 961462-0403
    M/N V-UBQ42
    n/p 860-000168 is not listed as compatible.
    I believe that this model is sold at Wal-Mart!
    Do you think you and Logitech can get on the same page?

    Hello Fedora,

    You are 100% correct that Logitech Quickcam Chat Webcam is compatible with Win 7. Visit this link:

    You can try it for yourself by installing it on your computer windows 7. If it is not detected or does not behave as it was supposed to include then don't panic.

    Try to install the device in compatibility mode for Vista or XP with Service pack of your choice.
    * Right click on the program executable (it ends with .exe), then click [Properties]
    * Click the [compatibility] tab to open the abc32. EXE property sheet.
    * Click on the [run this program in compatibility mode for:] box, and then select the operating system you want to invoke compatibility for the menu drop down.
    * Click [apply] then [OK] to exit the property sheet.

    Good luck $

  • use of Web cam? How can ensure me that my webcam works?

    How can ensure me that my webcam works?

    Right click on my computer icon > then choose Manage > choose Device Manager in the left panel > then look on the right side of imaging devices

    If you find it then your webcam is detected and you already install your driver of the webcam and everything else you need is to open Skype or any other program to use.

  • Logitech webcam was working fine before, but now it isn't there at all.

    the thing is my webcam was working fine before. In this sense, there was an adequate software and it opened well... So I don't know... I did not open this during a few days and today when I see that I was not able to find it at all... all first I thought that it was not grateful but den I realized that is... cuz its der in Panel d. And when I looked up the location and everything he showed me that one icon but dat thing opens at all my webcam C270 HD model if dat can help...

    Logitech has webcam drivers for your webcam. uninstall the software from Control Panel and reinstall from here

  • How to open a file downloaded microsoft word to macos sierra

    How to open a file downloaded microsoft word to macos sierra

    You should just be able to double-click on it since OS X built a decompression software. But unless you are sure that the source of the MS Word file is safe and secure, be careful, because a typical method of malware distribution is through such files.

  • How to open a new page (new document) without closing existing?

    How to open a new page (new document) without closing existing?

    In the current version of Pages on a Mac, you simply go to the file menu and click New or use the keyboard N command.

  • How to open 2 sites on start and 1 Web site when you click the home button?

    How to open 2 sites on start and 1 Web site when you click the home button?

    You can change your shortcut on the desktop Firefox with two starting URLS. To try:

    • Shortcut on the desktop: right-click on the icon, choose Properties
    • Icon taskbar pinned: clic click right on the icon, right click in Mozilla Firefox, click on properties

    Windows normally selects the shortcut tab. If this is not the case, go ahead and click on the shortcut tab.

    You will see the target highlighted. On 64-bit Windows, which is usually either not less the following:

    "C:\Program Files (x86)\Mozilla Firefox\firefox.exe"

    For the specific shortcut launch pages, you can add them to the end, for example:

    "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -url "" -url ""

    After OK'ing the Properties dialog box, you can test everything right now to confirm that Firefox is now launching a window with tabs. Either:

    • Double-click the shortcut on the desktop
    • right click on taskbar icon pinned, click Mozilla Firefox

    Who do you want?

  • How to open applications that I have in iTunes that are from sources other than my Mac Mini computer as my iPad and iPhone?

    How I open my apps on iTunes that I got here from other sources such as the iPad or my iPhone?  I downloaded them on my Apple Mac Mini computer on the iTunes apps page, but can't seem to open an any of them?  Thanks for your help!

    iOS (with the exception of those that you created) applications cannot be run on a computer.


Maybe you are looking for