How to open the subvis before running software?

Hi all

I wonder if there is a way open subvis with my main vi and have it run at the same time the main vi is running?  As soon as I double click on the main vi, I want the panels front-end Subvi to pop up with the vi main and run them all when I click on run on my main vi.  Thank you.

To get the sub vi FPs to open when you call, go to file > VI properties, select the appearance of window option in the dropdown menu, click Customize and check "see the front when it is called.

At least the front of the auxiliary of the screw panels, which will open as soon as they are called in the main vi.

As for having all FP open just by opening the main vi, but before you run the vi main, I'm not sure.

Edit: a typo in

Edit 2: Under "before show Panel when it is called" is another option.  «Open front when load.»  Looks like what you want.  That check for all of your sub vi

Tags: NI Software

Similar Questions

  • How to get the Subvi (the virtual path is in .exe) reference in Run Time System

    Hello world

    The problem is how to get the reference of the Sub - VI in run time system, when the Subvi is in .exe after construction.

    More details:

    Top of page vi called the Subvi dynamically, so that the Subvi is always included, and the source object is the application.exe.

    After the above configuration, the Sub - VI will be the application.exe. For example, the path of Subvi est...\application.exe\SubVI.vi

    So, how to get the reference of the Subvi in Run Time System?

    I can't do it when you use 'open reference VI' with le...\application.exe\SubVI.vi path in the run time system.

    In fact, I can create a file to include the Subvi, rather than build the Subvi in application.exe, then I can get the convenintly reference. But this isn't my favourate average.

    Thank you

    chenyin

    That is the problem. Call a Subvi dynamic means users could change, but it is also very attractive.

    The dynamic call should be used in a user control, but some parade can avoid problems.

    It depends on why you use dynamic calls...-online 2 main ways:

    -Dynamic call are used to maintain a scalable framework for the code without acting on the executable file-online a single VI distribution managed by the administrator/developer

    -Dynamic call are used to provide a collection of "external" characteristic that could be enriched by the administrator/developer. For example, you provide your customers a set of selectable custom signal filters in the executable.

    In 2 cases, you are only able to assess the skills of the users to know if there is a risk of damage, if there is a change.

    So to stay only master a parade might be to provide dynamic VI without a schema, but with the problem of maintenance, since no in-place editing and more attention to manage distribution.

    Another way is to hide the actual distribution to user-online call dynamic VI but it without name as *.vi but others (a repellent name as system of OS name ) or simply without extension in order to attract not user... but that's debatable...

    Another more difficult but more secure method is to create a consistency check before your routine (version, user, modified date,...)

  • How can I set a password for firefox so that everyone must enter the password before running firefox

    My younger sister run my firefox just to this afternoon (she origin use IE), and she saw something that is not visible. How can I set a password for firefox so that everyone must enter the password before running firefox?

    Another option is the master password + extension.

    You must first make sure that Firefox uses a master password, for more details on how to do that see use a master password to protect stored logins and passwords. Then with the master password + extension in its options, go to the getting started section and make sure that "ask for password at startup" and "Exit if cancelled" is selected both.

    As with all extensions, this protection is quite weak and can be bypassed if start you Firefox in safe mode that disables extensions.

  • When I double click c:\ icon in my computer, it always invites me to choose a program to open it. How to open the icon c:\ automatically bypassing the prompt to choose a suitable software?

    When I double click c:\ icon in my computer, it always invites me to choose a program to open it.
    How to open the icon c:\ automatically bypassing the prompt to choose a suitable software?

    Rxtr,

    Welcome to the Microsoft Answers community. Some people have found a solution in the steps described in the disk opens on double-clicktroubleshooting.

    I hope this helps.

    Lisa
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to open a mac-non-exclusive software on windows?

    I had Parallels before and this program (study for the CPA exam software) on my mac which could only be opened in windows.  Now that I've got VMware instead, I can't understand how to open the program.  I tried to create a folder with the program file, but when I open it in windows it is just show me the contents of the folder, do not let me run the program.

    Help, please.

    You need install program which runs under Windows in VMware Fusion, like you did when running in Windows under Parallels Desktop correctly.  In other words, most of the Windows Applications, certainly understood more then a unique need executable, must be properly installed through their Setup not only accessed/executed from a shared folder.

  • Open a Subvi and run automatically

    Hello everyone,

    I ve a structure of the event in which a Subvi is called by server of VI. I Don t want the main VI to freeze I turned forward until it is turned off.

    But the Subvi is called and in edit mode. How can I call the Subvi and run automatically?

    Kind regards

    Wilbur

    Hi Wilbur,

    Good afternoon and I hope that your well today.

    Thanks for the post.

    The VI property Exec.RunOnOpen is not necessary - if you are using Server VI, this property is ignored - and your using the method run a VI in any case.

    I think that your problem is with the configuration of your reference open VI. If you set the entry to zero (0) options it works? It does for me. And if I said that admission to 8, it load in edit mode.

    The problem that I believe is in the detail of the reference open Help content. When the reference is destroyed in the server called VI VI VI is shorter.

    For example, I have a small delay between my RunVI (wait that fact - false) and the reference close VI. After the period of my called VI stops.

    What results you want to achieve? You try to call a reentrant VI? If so, please take a look at the following example

    Load and call several Copies of a Subvi using VI Server

    http://zone.NI.com/DevZone/CDA/EPD/p/ID/4192

    Please let me know how found you this information.

  • Satellite U845W-S400 - how to open the laptop to put it in an SSD

    Hi all

    I would like to know how to open the laptop to put it in an SSD.

    There are 6 screws on the bottom, and I guess that some under the keyboard.

    I don't have a guide but to know for sure where they are before I start prying things open and could even damage it.

    Any help would be really appreciated since I couldn't find anything on the web.

    Kind regards
    Robin

    Stand by.
    You may have a defective stupid question but not SSD inside, or you want to upgrade HDD with SSD?

  • How to open the Pavilion g6-2210us laptop computer to install RAM?

    I have a HP Pavilion g6-2210us laptop PC running Windows 8.  He came with the bar of 1 to 4 GB memory and has a foul slot up to 4 GB of RAM.  I bought another 4 GB module and intended to install today, but I don't know how to open the bottom of the computer to install the RAM.

    I have a Compaq laptop that was new in July 2007 and he has a sign on the bottom that covers the compartment memory and a separate panel that covers the hard drive.  Each of these panels can be removed by loosening a few screws and pulling the top of the Panel.

    But with this new HP Pavillion-2210us g6, I see a big sign which applies to sites of memory and hard drive.  And there is only one screw.  Everything simply loosen this screw does not allow the Panel to be raised.  So I suspect the slides Panel stop someway.   Can someone explain how the Panel is removed?

    Hello

    See Page 49 of your & Maintenance Guide.

    Kind regards

    DP - K

  • How to open the system maintenance Troubleshooter in windows vista

    How to open the system maintenance Troubleshooter in windows vista?

    Hello

    Please be informed that Troubleshooting maintenance system was introduced from Windows 7.

    However, you can run the fixit mentioned below for Vista.

    http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

    You can take a look at solving the problems of system maintenance in windows 7.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-system-maintenance-Troubleshooter

    For more information, please visit the links below.

    http://www.Microsoft.com/atwork/maintenance/speed.aspx

    Optimize Windows Vista for better performance.

    http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

    Warning of Chkdsk.

    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    For the anti-virus scanning:

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    I hope this helps.

  • My question is how to open the system advanced settings in window 7 64-bit home preuim

    My question is how to open the system advanced settings in window 7 64-bit home preuim

    Hello

    Assuming you mean the Windows Advanced System Settings screen, then right click on my computer and choose Properties.  On the left side of the screen, you will see a link for the advanced system settings.

    You can also call directly my pressing the windows and R key (which will bring up the Run dialog box) and typing in control sysdm.cpl

    I would like to know how you, or if you want to say something else.

    Good luck & enjoy Windows 7
    Jon

    If this message was useful and allowed, please consider the vote and it offers as a response...

    My Blog - www.insidetheregistry.com

  • How to rebuild the registry key 'Hkey_local_machine\software\microsoft\windows\currentversion\explorer\folderdescriptions '.

    How to rebuild the registry key 'Hkey_local_machine\software\microsoft\windows\currentversion\explorer\folderdescriptions '.

    Hello

    Hkey_local_machine\software\microsoft\windows\currentversion\explorer\folderdescriptions

    Try to run the system restore.

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    To run System Restore, you can consult the following link:

    How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows 7:

    http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  • How to open the url of the calendar app like trip Blackberry?

    I m like Blackberry Travel application development. In Blackberry Travel, add when a flight, he adds in the calendar. In this case 'Notes', which appears a url to load the application and see the flight.

    I need to do the same thing, but only the behavior of app loading. So, I have two questions:

    • How to open the app to the url? I have seen this but, when I use the HttpFilterDemo sample, when I click in the url www.rim.com I typed in a calendar event, run never setRequestProperty method.

    • How can I watch 'open with Blackberry' when I click on the URL?

    Thank you very much.

    It s done!

    A perfect example in the documentation for the blackberry developer

  • How to open the files .fxm and .fxr with fax windows 7 & scan?

    How to open the files .fxm and .fxr with fax windows 7 & scan?  These faxes have been received when I had Windows XP.

    Hello

    A file with FXR and FXM file extensions is a Document received from WinFax.

    You can open the FXR and FXM file by double clicking on it and let your PC decide which default application should open the file.   If no program opens, the FXR and FXM file, then you have probably an installed application that can view and/or edit FXR and FXM files.

    You can use a Notepad or another text editor to open these files.  Number of files is files read-only, which means little matter file extension, a text editor may be able to view the contents of the file properly.  This may or may not be the case with FXR and FXM files, but it's worth a try.

    How a FXR and FXM files:
    There are two ways to try to convert a file to a different file type:

    a. open the FXR file in its default program and choose to save the file open in another file format.

    b. use a softwarefrom online file conversion to convert these files to another file format.

    Note:
    using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Thank you

  • Please can you tell me how to install the plug in Nik Software?

    Hello everyone, I have improved with some creative Photoshop clud.

    I opened the program and I have more ' Cap found in Silver Efex.

    Please can you tell me how to install the plug in Nik Software?

    See here:

    Installation of the Collection Nik in Photoshop CC - YouTube

  • How to open the Console for forms?

    Hello

    We use forms 11 GR 2 with Weblogic Server 10.3.6 with Database 11 GR 2.

    I am able to open two type of console successfully;

    1 oracle Enterprise Manager Database Control.     (for the database of monitoring)

    2 oracle Weblogic Server Administrator Console.   (for Weblogic Server monitoring)

    But I do not know how to open the console to forms (such as Oracle Enterprise Manager 11 g Fusion Middleware Control), for the monitoring/control activities forms/States, such as what user using what forms, killing shape etc user sessions.

    Please guide how to start console for forms/States.

    Thank you.

    Abdelmajid Ben.

    Open the weblogic console and applications deployed to em. The server administrator must be running.

    Concerning

Maybe you are looking for