How to operate the new card WLAN on my Satellite P105-S6024?

Similar Questions

• Express the Media Player (EMP) recovery disk - satellite P105-S6024

  I have a problem with my on my new machine satellite P105-6024 express Media Player software.

  As I bought it, everything works fine. But then, I did the partitions on my HARD drive and I instaled all the software recovery disc. And everything looks earlier and work properly but Express Media Center. It seems that it is not installed. I found the special Express Media Player restore disk but I don't know how to use it. (I am a novice complite). As I knew EMP is a linux-like software and it is not visible in Windows. And I know that there was a small special partition dedicated to this application. This partition has been deleted. And I'm not sure that it is possible to install EMP once more on my laptop. How can I use the EMP recovery disk? If I just run in the windows environment I see just a few files - but their execution, nothing is happen. I'd appreciate a small manual.

  Thank you very much in advance

  Hello

  I found this on the web:

  Installation Guide step by step for Express Media Player and Windows XP Recovery on two partitions in Expert mode:

  (1) all DATA on HARD drive will BE DESTROYED IRREVERSABLY (it's serious!)
  (2) install Express Media Player:
  Boot from the recovery Express Media Player CD
  --> use [delete all Partitions] (can be on the left side of the menu for older versions of reader).
  THIS ERASES THE ENTIRE HARD DRIVE!
  (3) boot with the Windows XP Recovery CD, go to expert mode and exit the "TOSHIBA Recovery Tool" (version OEM Ghost) using menuitem "Quit."
  (4) you can use fdisk.exe or gdisk.exe - I'll show the syntax here gdisk
  (its easier to describe and there are a lot of descriptions for FDISK on the net)
  (5) now, we create two partitions (size of 50%: 50%-playersize).
  --> At the DOS prompt, type:
  Gdisk 1 /cre /pri /sz:50%-> creates a primary partition 1
  Gdisk 1 /cre /ext-> creates an extended partition 2
  Gdisk 1/log /cre-> creates a 2nd logical partition
  Gdisk 1/p:1-> partionion set 1 active /act
  (6) now reboot with Windows XP Recovery CD, go to expert mode
  (7) menu use: Local\Partition\From Image, choose image GHO menu
  (8) there should only be ONE partition available source:
  1 primary DiskLoad NTFS 07...-> pick this one!
  (9) Select destination disk (there are also only one)
  1 basic...-> pick this one!
  (10) now you need to choose the destination partition - there should be three to choose!
  (11) select:
  1 primary 0C Fat32 without name...-->! BE SURE TO CHOOSE THIS ONE!
  (12) to confirm that you want to write on this partition
  "(13)" TOSHIBA Recovery Tool "is unpack and install the operating system
  (14) subsequently Windows XP and Media Player Express are installed

  Hope this will help you. Good luck!

  Good bye

• How to operate the new listener automatically?

  Hello
  
  OS: Windows XP
  DB: oracle 10g
  
  
  I added a new listening port of the listener.ora file.
  
  After restarting the computer, I found that only the former auditor was underway, a new one must be started by the command "lsnrctl start new_listener_name" manually.
  It's really annoying. Could someone tell me how set and make this listener running automatically?
  
  BR
  Martin
  
  Edited by: tqma may 25, 2011 16:02
  
  Edited by: tqma may 25, 2011 16:12
  
  Edited by: tqma may 25, 2011 16:13

  Hi Martin,

  You need not write screept in windows. You go to the Setup Wizard net oracle. Create new listner. Create the service. and start the listner.and that's all. It will be operational. and as I mentioned go to administrative tools-> services-> name-> property listner->, click start automatically. and the next time it starts automatically.

  Hopefully this might solve the problem.

  Thnaks,
  Khalid Joshi
  Oracle Apps DBA

• How to get the graphics card Intel HD to Satellite C660?

  Anyone know how to get graphics Intel HD for a Satellite C660-1JH PSC0LE please?

  Hello

  You have the Satellite C660-1JH?
  This laptop supports the Mobile Intel GL40 Express Chipset
  The Intel driver should be available on the Toshiba driver page as well as on the Intel driver support site.

  On the Intel page, you will find the driver looking for Mobile Intel 4 Series express chipset family:
  https://Downloadcenter.Intel.com/product/81507

• How to use the Audio speakers 5.1 on Satellite P105-S9722

  Hello

  I have a P105-S9722 Satellite with Windows Vista Edition full and connected to my home theater with mini plug on cable Toslink. I have sound but only in my front speakers.

  In my home theater when I connect any hardware supports 5.1 a blue light but I can't find a way to configure windows to use the surrounded her.

  What I am doing wrong?

  Hello

  Have you changed the speakers in the sound settings and properties of audio devices located in the control panel?
  The tab called Volume should open after opening sounds and audio devices.
  Please select the advanced option and choose the speaker 5.1 surround speakers

  Greetings

• How to change the graphics card on the 15 new

  Hello world

  I just got my new alienware 15 and I can't seem to use the nvidia card instead of intel because "fn + f7" no longer exists in this system and some options are provided in the bios.

  Does anyone know how to go the nvidia card in the new system of 15?

  Make sure you have the latest nVidia and Intel drivers installed.  I noticed the same problem on my 15 when I've seen, but resolved as soon as I updated.  I suggest that you install Intel drivers first, and then the nVidia drivers.  So if really don't know the issues, but that's what I did and it works like a charm.

• Satellite A200 - new card Wlan (Intel 5300) = Wlan led is always OFF

  Hello world

  I have recentlly bought a new card WLAN Intel 5300 (533AN_MMW) for my Satellite A200 - 1 CG (PSAE3E...). I installed a new card without any problems, downloaded and installed new drivers (Win7) also.
  The problem is that the Wlan led does not illuminate any. So I don't see the card functions normally in the Device Manager, but cannot establish a wireless connection because the Device Manager indicates that the WLAN switch is turned off.

  Help!

  Kind regards
  Igor

  Dear Igor

  Can you please tell us what A200 you exactly (A200-xxx) so that we can check the Toshiba for Win7 download page?

• Error 0X0000007E Stop after installing the new card mother and CPU.

  Original title: Stop error after installing the new card mother and CPU.

  After I installed a new motherboard and CPU I got a stop error 0X0000007E (0XC0000005, 0XB77EA756, 0XB84C742C, 0xB84C7128) and it restarted immediately. It always starts in safe mode, but I can't understand what is wrong. The old processor is a pentium 4 3 ghz, not sure what the motherboard was, new processor is AMD Athlon 64 X 2 Dual core 4200 + and I only know that the motherboard is an ASUS socket AM2. Device Manager does not recognize the CPU correctly, it shows just two entries called processor. As far as I can tell, it's almost certainly a driver issue, but I don't know how to diagnose or fix this. I am running windows XP home, I removed my video card, running 2 hard drives at 120 g (M) and 200 g (S), a DVD drive (M) and a reader of CD (S), and a stick of RAM to 1 GB.

  If you have made the change without having to reinstall XP, you will be taking and Pray H@ll. the best thing to do would be to reinstall XP and make sure you have the drivers available for your motherboard available so that you can update the installed chipset. In addition, be aware that if you have an OEM of Windows version, the license is dead when you changed the mother/CPU card.

  I hope this helps.

• where and how to get the new Firefox add - one of who is spying on us. Please mail to...

  Heard speak adds the new on Fire Fox. Where and how to get the new Firefox add - one of who is spying on us. Please mail to maheshubhayakar at rediffmail.com

  edited by email address - moderator

  It is helpful if you provide a link to the article you were reading.

• HOW TO STOP THE NEW ADS ON FACEBOOK... THEY ARE FRIGGIN BORING AND REEK HAVOC WHEN YOU PLAY... PLEASE ME TELL HOW TO BLOCK THEM!

  How to stop the new ads on Facebook

  I get very annoyed by ads to where they are on the web so I use an add-on called 'Adblock Plus' which uses its database to block known ads and you can even block yourself!

  With 'Adblock Plus Adblock Plus ' installed, you can block all advertising photo:

  1. right click on the announcement of photo that you want to get rid

  2. in the menu, click the option that says: ' Adblock Plus: block image... "(it is usually at the bottom of the menu)

  3. when the pop up box appears, simply click 'Add filter' and advertising will disappear before your eyes!

  If this was the answer you are looking for, please click 'Resolved' - thank you.

• Freshly installed v 5.0.1 3.6 v want to save a tab currently displayed, put in a folder of bookmarks as I have done before. Looked about for a way of doing-no luck so far. Please tell us how do in the new version. Thank you.

  Freshly installed v 5.0.1 3.6 v want to save a tab currently displayed, put in a folder of bookmarks as I have done before. Looked about for a way of doing-no luck so far. Please tell us how do in the new version. Thank you.

  Sorry, it's because of an add-on I installed. I edited my previous post, hitting on this part of the menu bar.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Equium A210-1AS: how to upgrade the graphics card from 128 MB to 256 MB

  Hello

  can someone tell me how to upgrade the graphics card 128 MB to 256 MB on the Satellite A210-1as... thx

  Hello

  Update graphics card is not possible.
  The GPU chip is soldered on the Board and it of not possible to remove the sleeve.

  Good bye

• How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP?

  Separated from this thread.

  Hello

  Thanks for the reply, I clicked on the link and it shows windows...

  Here I can not open the widows of anywhere.

  How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP

  MINE IS A VERSION OF COMPAQ PRESARIO HOME ON WINDOWS VISTA

  He always goes to startup repair

  then he said not being able to correct automatically

  Under system recovery option what can I do?

  I don't want to go back to the point of origin of the memory (factory settings)

  Thank you

  Patrick

  Hello

  Have you tried using SafeMode w/command invites to perform a system restore?

  1. Press the power button to turn on the computer.
  2. In the first screen, press the f8 key repeatedly every half second until what the Windows Advanced Startup Options screen displays.
     
  3. Press the arrow key down until Safe Mode with command prompt is selected, and then press ENTER. Wait while the Windows Load system files. The Windows log on screen is displayed.
  4. At the command prompt, type rstrui.exe, and then press ENTER. Wait a few moments for the system to open restore window.
  5. Follow the on-screen instructions to perform a system restore.

  You have now returned the computer to a previous restore point using Mode safe mode with command prompt.

  Using Microsoft System Restore (Windows Vista)

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00807369

  You also have the option to create a backup of your files when you perform a recovery

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c00809678&LC=en&product=18703#n405

• How to format the SD card?

  Android 4.0 will erase all data on my phone, right?

  I want to format the SD card, too, because some setting or cache is stored on it as well.  When and how should I do this?

  Here's how to format the sd card
  Settings > storage > unmount sd card > remove sd card

  Don't forget to mark the right answer and the useful answer

• How to upgrade the graphics card on G71 - 345 CL

  Hello

  How to upgrade the graphics card on G71 - 345 CL. The graphics card is expandable. If so, what are the options for upgrades.

  Hello

  Unfortunately, your Intel GMA is integrated and is not an evolutionary element.

  Best regards

  DP - K