How to operate the scanner hp scanjet 4400c on windows operating system 7

Similar Questions

• How to embark the pilot USB6008/9 on a windows operating system image this 5.0

  
  

  Hello

  I had to make an operating system image, including drivers for USB6008/9. I did it with the Platform Builder for Windows CE.

• How to determine the number XP or XP 64-bit operating systems.

  Hello
  I need to download a driver but need to know if I have Windows XP, XP 64. I run Internet 7 SP3 if that makes a difference. Properties-General-he reads the slot system Microsoft Windows XP Home Edition Version 2002 Service Pack 3. I think this answers the question that it is not XP 64 but want to make sure and would appreciate any help.

  XP Home does not come as an x 64 version.

  How to determine whether a computer is running a 32-bit version or the 64 bit version of the Windows operating system. http://support.Microsoft.com/kb/827218

  Windows XP if you have Windows XP, there are two ways to determine if you are running 32-bit or a 64-bit version. If one does not work, try the other.

  1. Click Startand then click run.
  2. Type sysdm.cpl, and then click OK.
  3. Click the general tab. The operating system is displayed as follows:
     • For a 64-bit version operating system: Windows XP Professional x 64 edition Version < year=""> appears under System.
     • For a 32-bit version operating system: Windows XP Professional Version appears under System.

     Note is a placeholder for a year.

  1. Click Startand then click run.
  2. Type winmsd.exe, and then click OK.
  3. When System summary is selected in the navigation pane, search for processor under item in the details pane. Note the value.
     • If the value that corresponds to processor starts with x 86, the computer is running a 32-bit version of Windows.
     • If the value that corresponds to processor starts with ia64 or AMD64, the computer is running a 64-bit version of Windows.

  If you cannot determine the number of bits of the operating system with these methods, go to the "Next steps" section (of the KB article)

• Need drivers for my scanner HP Scanjet 4400c for Windows 7?

  Where can I find drivers for HP scanjet 4400c please? I have a laptop HP pavilion dv - 4 1435dx and the Windows 7 operating system. Thank you

  Some info to read:

  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Scanjet%204400c%20Flatbed%20Scanner&v=HP&uid=C9870A&pf=0&pi=8&c=Printers%20%26%20Scanners&sc=Scanners&os=64-bit

• How to operate the Instant Client on HP - UX 64 bit system?

  Hi all
  I downloaded the version of instant client 10.0.2.4 in the folder/oracle10/instantclient_10_2.
  
  In the instructions, I see:
  
  Installation steps:
  
  
  + 1. Download the Client now packages appropriate for your platform. All installations REQUIRE the Basic or beginner package. + OK
  
  + 2. Unzip the packages in a single directory as "instantclient. + OK
  
  + 3. Set the library load path in your environment in the directory in step 2 ("instantclient"). On many UNIX platforms, LD_LIBRARY_PATH is the appropriate environment variable. On Windows, the path must be used. + OK
  
  + 4. Launch your application and good luck. + HOW CAN I LAUNCH THE APPLICATION?
  
  This is the contents of the folder:
  
  Oracle10-gfaae329: instantclient_10_2/oracle10 / > ls - la
  Total 201516
  drwxrwxrwx 2 root sys 1024 Sep 27 03:11.
  drwxrwxrwx 3 root sys 1024 Sep 27 03:24...
  -rw-rw-r - 1 root sys 192 17 May 2008 BASIC_README
  -r - r - r - 1 root sys 1609607 17 May 2008 classes12.jar
  -rwxrwxr-x 1 root sys 50944 genezi 17 May 2008
  -rwxrwxr-x 1 root sys 23053944 libclntsh.sl.10.1 17 May 2008
  -r-xr-xr-x 1 root sys 2617520 libnnz10.sl 17 May 2008
  -rwxrwxr-x 1 root sys 1517832 libocci.sl.10.1 17 May 2008
  -rwxrwxr-x 1 root sys 72627952 libociei.sl 17 May 2008
  -r-xr-xr-x 1 root sys 136112 libocijdbc10.sl 17 May 2008
  -r - r - r - 1 root sys 1555682 17 May 2008 ojdbc14.jar is
  
  I can't find the runInstaller or an executable file.
  
  Could you please help me urgently?
  
  
  Thanks in advance. :-(

  887722 wrote:
  I need to install a client 10.2.0.4 (or 10.2.0.2) for HP - UX 64 bit PA_RISK but I founded only 10.2.0.1 customer. I was installed this version.

  10.2.0.1 is a basic version. If you need a patch highest level, then you should visit MOS (support.oracle.com) to obtain the necessary fix define and apply the patches (i.e. Update) the Client Installer scheme.

  I knew that the moment customer was not a full client installation.

  What do you see as "complete customer?

  You want to use 3rd party tools/applications or tools Oracle, for example sqlplus expdp, sqlldr, etc.. ?

  Now, how can upgrade the client 10.2.0.1 to 10.2.0.4 (or 10.2.0.2)?

  See above.

• How to restart the disc to reformat and install new operating system?

  How do you install the bios to boot from the disk drive so I can load windows 7

  Hello

  Your machine should have a button to hit while the message is displayed on the screen of the POST...

  The one with the Logo of computers...

  It varies according to the manufacturer, but should be something such as F12, F9, etc...

  My laptop requires that I hit ESC first and it then displays the other option keys...

• How to operate the jet hp desktop scanner 5600

  How to make the scanner work on my hp 5600 office jet printer

  Hello

  you have given a serial number, not a model number

  Go to the HP website and search for drivers and troubleshooting steps

  http://WWW8.HP.com/us/en/support-drivers.html

  or try the HP support forums

  http://h30434.www3.HP.com/

• How to use the scanner as a scroll

  Hello

  I have lenovo e40-70, how to use the scanner as a scroll wheel?

  This issue has developed before and unfortunately the software Lenovo does not support.

• HP Photosmart B110: Solutions Center installs - problems of usb - only wanted to scan - how to install the scanner part

  -With the help of HP Photosmart B110

  -Use of Tower/Desktop computer running Windows 7 64 bit

  Printer/Scanner connected via WiFi to router

  -Printer part works, I can print to this device

  -Scanner is accessible via the device Web page.

  I want the software of the scanner Solutions Center.

  I can't install the Solutions Center on Windows 7 64 bit. Setup stops and says that I have USB hardware and driver problems. USB on my Tower is USB2 and USB3 ports. Everything works perfectly and the Windows Device Manager has no problem with USB drivers/devices.

  How can I install the scanner software (or all of the Solutions Center software)?

  Tried to look in the folder for the files of instsaller scanner, nothing seems to work. (pulled other positions where it not install Solutions Center). Computer is working very well, so my only option at the moment is to look through the device's Web page, but it is not the best. And I would like to use the software. Also one third of the software "fax and scan" software and windows does not see the connected B110 (probably because it is on a network and not directly plugged into a usb port), so these two options came out.

  HP forum, help please. Is there a way to bypass the usb part? I use this device on a network. Windows 7 sees (even if only as a printer), so also want windows to consider it as a scanner as well.

  Thank you

  Hi @jedi11csa,

  Thank you very much to get back again.

  I just talked with a few colleagues in this regard, and this problem seems to be more a matter of Windows operating system, if the computer displays that USB related errors as well as the installation had not yet reached the point where it asks you to select your connection type.

  Maybe it's an investigation that is best suited for community Microsoft Forums as my resources have been exhausted in this respect.

  I hope that you are able to find the solution you need.

  Thank you.

• How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP?

  Separated from this thread.

  Hello

  Thanks for the reply, I clicked on the link and it shows windows...

  Here I can not open the widows of anywhere.

  How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP

  MINE IS A VERSION OF COMPAQ PRESARIO HOME ON WINDOWS VISTA

  He always goes to startup repair

  then he said not being able to correct automatically

  Under system recovery option what can I do?

  I don't want to go back to the point of origin of the memory (factory settings)

  Thank you

  Patrick

  Hello

  Have you tried using SafeMode w/command invites to perform a system restore?

  1. Press the power button to turn on the computer.
  2. In the first screen, press the f8 key repeatedly every half second until what the Windows Advanced Startup Options screen displays.
     
  3. Press the arrow key down until Safe Mode with command prompt is selected, and then press ENTER. Wait while the Windows Load system files. The Windows log on screen is displayed.
  4. At the command prompt, type rstrui.exe, and then press ENTER. Wait a few moments for the system to open restore window.
  5. Follow the on-screen instructions to perform a system restore.

  You have now returned the computer to a previous restore point using Mode safe mode with command prompt.

  Using Microsoft System Restore (Windows Vista)

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00807369

  You also have the option to create a backup of your files when you perform a recovery

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c00809678&LC=en&product=18703#n405

• How to operate the F1 on the keyboard wireless 1027

  How to operate the F1 on the keyboard wireless 1027

  If key Fn is disabled in the BIOS, then you need to press Fn + F1 key, use the special function and just press the F1 key to use F1 and vice versa.

• I need someone to show me how to install the scanner

  I need someone to show me how to install the scanner

  Contact the manufacturer of the Scanner.

  They should have a manual/Instructions online for you on how to install their product.

  If they are not: Email/phone them.

  See you soon. Mick Murphy - Microsoft partner

• How disable us the "almost complete iDrive" notifications in Windows 7 Professional?

  How disable us the "almost complete iDrive" notifications in Windows 7 Professional?

  IDrive is not an Apple product, contact the iDrive and ask them.

• How to set the maximum fan speed. on X230t (Windows 8)?

  How to set the maximum fan speed. on X230t (Windows 8)?

  I use TPfancontrol to set the speed of the fan in the X230t. However, this will result in excessive wear on your bearing X230t fan, which causes a premature fan failure. Is there a reason why you want to run the fan at max speed?

• Win 7 does not give access to Disable Touchpad tapping function as on the previous Windows operating system. How can we do?

  As above "Win 7 does not provide access for disable touch pad tapping as on the previous Windows operating system. How can we do? »

  I FOUND IT!

  1. go in Control Panel
  2. find the MOUSE
  3. go in the mouse properties
  4. go into device settings
  5. go to settings
  6 uncheck tapping
  It should work for all Windows 7 OS computers laptops!
  This is my first post.  Let me know if it helps!