How to pin "Info button" Boolean values of the input data to acquire?

Similar Questions

• How the Boolean value off the coast in the system bell auto College after 5 seconds?

  How the Boolean value off the coast in the system bell auto College after 5 seconds?... and also the Bell has to ring only the days... Please help me

  basically take the time, times of beginning and end, including the days of the weeks...

• I pressed the reset button default values during the installation on Officejet 4620 navigation all in one.

  I pressed the reset button default values during the installation on Officejet 4620 navigation all in one, now I can't connect to my wireless network. My router is a box of phone company that I do not have access to. Any help?

  Oh, sorry.  Make sure the USB cable is NOT connected when you run the software or it will assume that you want a USB installation.  It will ask you which type of installation desired and, of course, choose wireless.

  Later you will be asked to plug a USB cable.  Wait until he asked.

• using the function - how to use the values of the input variables on the table select statement names

  Hello community, I have a problem when creating a function. The purpose of this function is to check the table of weather gave yesterday or not. We must check this on different tables on different sachems. We are creating a function with input variables.

  CREATE OR REPLACE FUNCTION IN_SCHEMA.IS_YDAYDATA_TO_TABLE

  (

  in_schema IN VARCHAR2,

  in_tablename IN VARCHAR2,

  in_datefield IN VARCHAR2,

  )

  RETURNS INTEGER

  AS

  -Declaring variables

  v_is_true INTEGER.

  BEGIN

  SELECT

  CASE

  WHEN MAX (in_datefield) = TRUNC(SYSDATE-1)

  THEN 1

  ON THE OTHER

  0

  END

  IN

  v_is_true

  Of

  in_schema.in_tablename

  ;

  RETURN v_is_true;

  END;

  /

  When creating, I got error: [error] ORA-00942 (44:19): PL/SQL: ORA-00942: table or view does not exist

  How to use the values of the input variables on the table select statement names?

  Hello

  Here's a way you can use dynamic SQL statements for this task:

  CREATE OR REPLACE FUNCTION IS_YDAYDATA_TO_TABLE

  (

  in_schema IN VARCHAR2,

  in_tablename IN VARCHAR2,

  in_datefield IN VARCHAR2,

  in_first_date DATE DEFAULT SYSDATE - 1,.

  in_last_date DATE by DEFAULT NULL

  )

  RETURNS INTEGER

  AS

  -IS_YDAYDATA_TO_TABLE returns 1 if in_schema.in_tablename.in_datefield

  -contains all the dates in the in_first_date of the range through included in_last_date

  - and it returns 0 if there is no such lines.

  -If in_last_date is omitted, the search only the data on in_first_date.

  -If in_first_date is omitted, it defaults to yesterday.

  -Time parts of the in_first_date and in_last_date are ignored.

  -Declaring variables

  sql_txt VARCHAR2 (1000);

  v_is_true INTEGER.

  BEGIN

  sql_txt: = 'SELECT COUNT (*).

  || 'FROM ' | in_schema | '.' || in_tablename

  || 'WHERE ' | in_datefield | ' > =: d1'

  || «AND» | in_datefield | '< >

  || 'AND ROWNUM = 1';

  dbms_output.put_line (sql_txt |) '= sql_txt in IS_YDAYDATA_TO_TABLE");  -For debugging

  Sql_txt EXECUTE IMMEDIATE

  IN v_is_true

  With the HELP of TRUNC (in_first_date) - d1

  TRUNC (NVL (in_last_date

  in_first_date

  )

  ) + 1                -- d2

  ;

  RETURN v_is_true;

  END is_ydaydata_to_table;

  /

  DISPLAY ERRORS

  If you must use dynamic SQL statements, put all the SQL statement in a single string variable, such as sql_txt in the example above.  In this way, you can easily see exactly what will be executed.  Comment out the call to dbms_output under test is completed.

  Try to write functions that will address not only the question that you have now, but similar questions that you may have in the future.  For example, now that interest you only to the verification of the data of yesterday, but later, you might want to check another day or range of days.  The above function combines the convenience of a function simple (looks like yesterday data if you don't tell him otherwise) with the power of a more complex function (you can use the same function to check any day or range of days).

• How can I restore my photos/docs from the Dell Data Safe emergency backup file?

  incompatibility with estensions file DSB

  Files saved during the backup secure files DAT Dell are the extensions of file .dsb by the Dell site. Windows 7 does not open the files to restore on reg location Windows Media as before the backup. .Dsb error message unrecognized files. How can I restore my photos/docs from the Dell Data Safe emergency backup file?

  I know that you need a Dell utility for this...

  And what has this to do with Windows 7 photos and videos, I really don't know...

• How to restrict the scope of the EU change when the input data are not available?

  Hi Experts,
  
  I have a user enter-able (EU) field in the Section. When the tag input XML contains data for this field, then the value must print in this area and it is not editable.
  If the input data are not available only that one time that the field of the EU must be editable.
  
  Any thoughts?
  
  I tried like below,
  
  Domain name creation: UE_CompName
  Length: 15
  Type: alphanumeric
  Rule: XDD
  Source name:! Transaction/Compname
  under PreEdit,.
  module: DALW32
  Procedure: procedure of desired
  Information: CALL ("UE_CHECK")
  
  like that, I've updated in the field properties.
  
  Content of UE_CHECK DAL below,
  
  CurrFieldName = Fieldname()
  CurrFieldData = @("CurrFieldName")
  
  IF CurrFieldData! = « »
  SetProtect ("CurrFieldName")
  END
  But it does not work... Pls help me to do this...

  I assume that the 'mapping' occurs during a batch operation (Gendata) through any rule the XDD defined for this field. In the batch, pre and Post Edit calculations do not. This feature is related to the WIP/entry. What you can do is to add a level section - PostImageDAL rule to call your script and protect your land once it was located batch of your operation.

  In FAP that contains that field, add the PostImageDAL rule in the property of the rules in the Section box. In the data box, do call your script.
  Your script is a bit wrong, it seems you were trying to get the 'current' domain name and then check the value of fields. Drop the part and simply name your field in the string in quotation marks in the @ () function and the SetProtect.

• Recommended value for the BAM data expiration time

  Hello
  
  Can someone tell me what is the recommended value for the BAM data expiration time?
  
  Enterprise Server default is 24 hours, but I would like to be able to raise the average runtime instance after several months. Is it reasonable to the value of the time-out value a high value? Or it will have an impact on the performance of BPM/BAM?
  
  Thanks in advance.
  
  Best regards
  CA

  Normally, we keep the BAM data expiration time at halfway with 24 to 72 hours. For historical reports that you are looking for the Data Mart / Data Warehouse DB are more logical. This database stores the data forever and takes pictures at longer intervals, normally 24 hours. These data are not in time real normally then because a capture instant is only taken once per day but will give you historical reports that you are looking for. The data from this database structure is almost identical to the BAM DB.

• How to assign array of Boolean values in LabVIEW?

  I want to assign array of Boolean values. IAM not able to do. For each Boolean I want to assign each value. Please help me...

  Thank you Mr President... He worked.but I'm stuck with the other problem.i created a 4-page tab control. How is it possible to change the 1 tab to Page 2 and page 3 page, etc. by using a Boolean control?

• How to dynamically add any control (digital button, boolean) to control the line and selected column

  Hello

  How to add a control (digital button, boolean) dynamically in control instead of lines and columns selected. Please suggest the idea or no matter what example code you have please share with me...

  Thank you

  Vieu

  Essentially, that's what you're looking for:

  

  Please note that you have to account border sizes and the label of the control so that the code does not work right out of the box. You should also check for the height and width of column and if the position is valid at all before moving around the control.

  Norbert

• How to use a Boolean value in the log duration?

  Hi all

  In my application I want to use a Boolean to connect once on an ongoing basis. When a boolean win 1, it connect time system. When a boolean win 0, it connects time system... & the cycle continues... We can use the button to change the Boolean value...

  Please guide me,

  Thank you

  Hi vaibhav.

  I created a control switch, whenver its State is changed... this moment is connected... Check the attachment...

  Thank you and best regards,

  srikrishnaNF

• How do I put a Boolean value until some other condition is met to reset?

  In PLC programming, you have sets and resets and a line of logic can put something on IT, until something else it resets and it turns OFF.  I was hoping to do the same thing in LabVIEW and will have a hard time imagine the solution.  Can anyone give me a tip?  I use the crippled basic version so no structure event for me.

  Change of use to a value entered in the wire loop.  Structures of the case allows you to change the value in the loop.    You can also use the function select

  

• Definition of default values for the inputs of button and the cursor?

  Hello

  I use Labview 8.5.1 and have a few entries button and zipper-type on my front. How can I set some of them having specific (as opposed to zero) default values when the VI is executed?

  Thanks for the help

  The default value for the type of slide of entry (or button).

  Right-click on the control.

  Select "Operations on the data" > "default to the current value of doing."

• Boolean Boolean value in the returned java action script implementation

  Hi all

  I have a called checkLogin() actionscript function that calls a remote java method called login()). Login supports two channels, user name and password and returns true if the combination is found in the database, and false if not.

  CheckLogin function either displays an alert if the connection function returns true or it'll run an animation sequence if it is false.

  The problem is that, although my java connection method returns true I can't define her revealing Boolean in the true action script. The Boolean remains "authenticated" as false. I know because I used a breakpoint after that that he has created and used the debugger to check the value of the variable.

  I know that my remote object is configured correctly because using network monitor I see the answer as true.

  It is the button that triggers the function:

  < s:Button = "8" x = "83" label = "Login" click = "checkLogin ()" / >

  Here is my function checkLogin() actionscript:

  private function checkLogin (): void {}
  authenticated = mainentry.login (username.text, password.text) as Boolean;
  {if (Authenticated)}
  Alert.Show ("connected!");
  } else {}
  Shake.Play ();
  }
  }

  Here is my statement of the remote object:

  < mx:RemoteObject id = "Mainentrance' destination = 'hand '.
  
  source = 'infrastructure. Hand '.
  
  / >

  Here's my exit Network Monitor: (Please note the right login and password for this application example is "admin" "admin"

  Request:

  Flex Message (flex.messaging.messages.RemotingMessage) operation = connection clientId = null destination = hand messageId = B1FF60B2-40E8-2580-209D-13CF5BCB9547 timestamp = timeToLive = 0 body 0 = [ admin, admin ] hdr (Iddm) = 2B5D49D7-A10B-DEA0-4A20-1D57FB576314 hdr (DSEndpoint) = my - amf

  Answer:

  Flex Message (flex.messaging.messages.AcknowledgeMessageExt) clientId = 2B5D53DD-8C0E-F45F-B5B1-19CF70CA88F6 correlationId = B1FF60B2-40E8-2580-209D-13CF5BCB9547 destination = null messageId = 2B5D53E2-6E0F-74FC-F37C-2170EAB2DEAD = 1284527580238 = 0 = true body timeToLive timestamp

  Any help would be greatly appreciated.

  -Felix

  Remote service calls are asynchronous in flex. You need listen to the EEG of result the result to the server event.

  private void mainentry_resultHandler(event:ResultEvent):void
  {
  authenticated = event.result;
  }

• How to connect the value of the input string to numeric values

  Hello

  I'm trying to figure out how to connect the value of unique user input string to numeric values. Basically I want the user to enter the name of a gas that I have a list for (I think I put the list of gases in a table >). Then I want to match numeric values 2 'a' and 'b', according to which gas, name of the user has set. These 'a' and 'b' values will be automatically matched with the name of the gas in a list that I put. For example, hydrogen gas has the value 3 for "a" and 4 for "b. when the user puts the ' hydrogen' name in a string constant, automatically 'a' and 'b' must be issued.» I have connect a and b to a formula

  Thanks for any help

  Hello

  It is perhaps not exactly what you are looking for, but perhaps you could use the enumerated data type and the array of clusters of points (a, b).

  Look at the VI I enclose.

• How can I connect 2D Boolean table at the entrance to the structure of the case?

  Hello

  I would like to know how to solve this problem. I try to connect the output of a digital 2D painting and a constant number of 'BIG' before you connect it to the entrance of the structure of the case. An error message appears and it shows ' the type of the source is a 2D boolean array. The sink type is Boolean "."

  I tried to 'disable indexing' on the box of the structure of the case, but the error remains. Would appreciate any comments on it.

  Entry 0 third entry in the index table, not the other.