How to place outgoing files to multiple channels for a single agreement

Similar Questions

• Select multiple channels for a single task - control and shift keys do not work

  Hello

  Following the advice of several other positions, I try to choose several physical channels in the drop-down list so that I can then use the function "unflatten channel channel" later. It seems that if I hold this key is pressed or cntrl, I should be able to select multiple channels in the list, however, this does not work for me. I tried to go in the "navigation key" property for the control channel to task, but there not all listed associations. Someone else has encountered this and found a solution?  I previously around that by declaring several channels by a colon (for example, ai1:3), but it does not work for the unflatten function.

  Thank you

  Claire.

  If I understand correctly, I think that you need to do is use a task property DAQmx. Try to use the channels property to get an array of strings.

• How to place data files in two places during duplication of database or refresh via RMAN test

  Hi all

  can you please find the solution and help me on this point

  How to place data files in two places during duplication of database or refresh via RMAN test

  Thank you

  Ran

  Hi all

  Please send me as soon as possible if you have a solution.

  Thank you.

  Ran

• How to convert a file SQM a PBO for Arma 2 file?

  How to convert a file SQM a PBO for Arma 2 file?  First, use the editor in Arma 2.  Then I save on user or single-mission I want to play a custom mission.

  Hi Tom,

  Thanks for posting the question in the Microsoft Community!

  You want to convert file SQM PBO.

  You can use a file converter software to convert file SQM PBO.

  You can use your favorite search engine to find the appropriate file converter.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For any question related to Windows, feel free to contact us.

• InDesign doesn't let me place an eps file... gives an error "cannot place this file. No filter for the requested operation. »

  InDesign doesn't let me place an eps file... gives an error "cannot place this file. No filter for the requested operation. »

  This happens with a particular .eps file or many .eps files?

  • The EPS files from Illustrator? What parameters are used when files are saved?
  • Also this happens for all files created in Illustrator EPS (even one you create brand new, with just a few text and simple work in it).
  • Where are stored the EPS files that you place in InDesign?  If there is a form of corruption of files on the hard drive? (Maybe need repair file permissions?).
  • If you work on a network: can the files when they are saved as EPS files on your hard drive?

  CARI

• exe files don't run for a single user

  Vista Business PC has a virus. I think that the virus has disappeared, but all the exe files will not work for a single user only. All other users that they work very well.

  I would like to understand why exe files work for users and a way to fix it.

  One of them should do it:

  Download the difficulty here http://www.winhelponline.com/articles/105/1/File-association-fixes-for-Windows-Vista.html .exe

  Or restore the .exe file association after incorrectly associating it with another application http://www.winhelponline.com/articles/165/1/Restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

• How to place a file at a specific location

  I need to know how to place an eps graphic in a specific location.  I can put a file but I can't seem to be able to move it.  Is it possible to position it correctly over the action of the place?

  Thank you

  Hi Mario,.

  Take a look at the ImageCatalog.jsx that comes with ID and look for the line:

  myRectangle = myPage.rectangles.add (myDocument.layers.item(-1), defined, undefined, {geometricBounds: [myY1, myX1, myY2, myX2], strokeWeight:0, strokeColor:myDocument.swatches.item("None")});})

  This should help you to get what you need (note geometricBounds: [15,15,59.5,66.5]).

  myDocument var = app.documents.add ();
  {with (myDocument)}
  myPage var = pages [0];
  {with (MyPage)}
  myFrame = pages.item var (0).rectangles.add ({geometricBounds: [15,15,59.5,66.5], strokeWeight:0, strokeColor:myDocument.swatches.item("None")});})
  {with (myFrame)}
  myFile = myFrame.place (File (myFile), false);
  }
  }

  You can also check:

  http://www.jongware.com/idjshelp.html

• Dedicated for each channel from multiple channels in a single task task disadvantage

  Hello

  My current acquisition software (C + c++ / GCC) encapsulates the methods rather clumsy niDAQmx C to interface with the data acquisition equipment in a class that represents a task of acquisition. This way I can create several instances, for example counter input, analog input, analog output, their terminals and the class supports all work low level as ensuring input analog fake internal is started if there are only counter entries such as the sample clock starts, or configure reminders N-sample, etc.

  It seems to work very well, and also the time seems to be good, because first of all the tasks on multiple instances of my wrapper. For triggered early, that I use

  DAQmxCfgDigEdgeStartTrig(mTask,mTriggerTerminal.toAscii().constData(),DAQmx_Val_Rising)

  in-house.

  Now my real question: what is the advantage of multiple channels, when everything seems to work fine with multiple tasks and only one channel per task? I don't see the disadvantage, it would first classify necessary acquisitions in types (I, ao,...) because several strings in a single task must be of the same type. With my approach I need not care because each channel still gets its own task.

  I don't know I'm missing something here. Maybe someone can explain it to me, maybe some limitation of multi-tasking, I have not yet read.

  Hey!

  Unless you specified for managing the it (simultaneous sampling) or modular instruments and hardware devices (see link )

  You cannot perform two tasks at the same time that access to the analog inputs, for example, because the

  ADC is a shared resource that is connected to a multiplexer, and that only one task can work in it at a time given. (see here )

  Similar restrictions often apply to other types of operations.

  I'm not aware of any performance issues, perhaps a little more memory could be used.

  So as long as your hardware supports what you are doing, you should be ok, I think,

  and it is only a question of clarity and intelligibility, ease of use and structure.

  As you use classes, I'm sure you've heard about encapsulation - so it is a

  question of how you want to design your application.

  In addition, when you work in LabVIEW, tasks feel more natural to the principle of data flow, because you have a thread for your data acquisition,

  and it works very well with our modes of standard design.

  So, if it is better for you (and works with the hardware), you can give all the channels its own task.

  Hopefully this might clarify some things,

  Kind regards

  Rome

  OR Germany

• How to submit multiple releases for a single application

  
  

  "I just continue to add beams.

  Yes pretty much.  I think it's better terminology, that you submit multiple beams for the 'liberation '.  Beams can be targeted by device and/or the OS level, so it's easy to create a version keyboard and touch screen using non-automatique operation weighing - although I'm not sure whose side the torch fits in!

• How better to configure ports of ether-channel for use with iSCSI?

  I had a quick glance and find a number of different discussions about the best solution for simlar scenarios but nothing quite close enough to convince me to implement the proposed solution.

  The configuration that I was left with is not ideal, because it is not redundent. So I need to find a quick solution pritty.

  Two cards (each NIC goes to different switch) - Console of Service

  Two network cards (both in the same key) - vMotion

  Two network cards (they both go to the same switch) - Prod (10 discussions)

  Two network cards (they both go to the same switch in an ether channel) - storage (iSCSI)

  The environment is a cluster of three ESXi 4.1 ENT U1 + environment, connected to a vCenter STD.

  Here's what I intend to allocate, but hoped a nice person enough to suggest the best configuration. I realize the number of connections to Prod is excessive and we will reach neaver as bandwidth, but I have free network cards.

  Two cards (each NIC goes to different switch) - Console of Service

  Two cards (each NIC goes to different switch) - vMotion

  Four NICs (two pairs in different switches) - Prod (10 discussions)

  Four (#) - storage (iSCSI) network interface cards

  The part that concerns me is get the configuration for storage network cards just like we use the ether-channel, which seems to complicate things from what I've read.

  So in summary I want to use four NICs for storage and bandwidth is not wasted I currenlty have using the channel of the ether. If I can work it another way without the use of ether-channel I am pleased to see again.

  If I have not provided enough information to evaluate, please let me know and I'll give you more.

  Thanks in advance for any helpful information.

  So in summary I want to use four NICs for storage and bandwidth is not wasted I currenlty have using the channel of the ether. If I can work it another way without the use of ether-channel I am pleased to see again.

  First of all, let me squash the myth an EtherChannel gives you additional bandwidth for iSCSI. Each iSCSI initiator can use an uplink to an iSCSI target vSphere being limited to a hash value "IP". Given that the source and destination IPs are always the same, the hash is always the same.

  I wrote about it here in my post seriously, Stop "Using Port channels for vSphere storage traffic":

  http://wahlnetwork.com/2013/03/05/stop-using-port-channels-to-vSphere-hosts/

  I recommend to use the vmkernel ports link. It is available in 4.1, but not through the GUI.

  http://pubs.VMware.com/vSphere-4-ESX-vCenter/topic/com.VMware.vSphere.config_iscsi.doc_40/esx_san_config/configuring_iscsi/t_connect_software_iscsi_initiators_to_iscsi_vmkernel_ports.html

• How to find the number of lines executed for a single query in oracle

  Hi all
  
  I have a query that will return the details according to certain search criteria.
  Here I want to how many lines is performed (as a column) for the given search criteria, including the details of the column table... in a single query.
  
  
  
  Thanks in advance
  Geraldine

  I want all the details and number of rows in table...

  SQL> select ename, job, count (*) over () total
    from emp
   where deptno = 20
  /
  ENAME           JOB                     TOTAL
  --------------- ------------- ---------------
  SCOTT           ANALYST                     5
  SMITH           CLERK                       5
  JONES           MANAGER                     5
  ADAMS           CLERK                       5
  FORD            ANALYST                     5
  
  5 rows selected.
  

• Place the data of multiple channels in the tables

  At this moment I have a sample program with a value of 8 data channels of my USB-6009 spitting in a graph of a waveform, which looks and works very well. Ideally, I would like to take this data and manipulate it to produce two calculations before it comes out on the graph. After I would handle that I want to display on a line chart (cloud?) as two lines of updated permanently. I think if I can get my 8 channels in 8 separate tables, the rest should be put in place.

  Thank you

  Hi Iwild,

  How you import your data?  You place data in a table in a first time?

  You use NEITHER-DAQmx?  If so, please see this document that goes over how to use NOR-DAQmx with text-based environments.

  Best regards,

• How to split a file into multiple files

  How can I separate a single PDF in separate page pdf file?

  Hi scottb22552830,

  You will need Acrobat free trial download Adobe Acrobat application | Acrobat Pro DC split split a PDF | Tutorials Adobe Acrobat DC. is not possible using free reader application.

  Kind regards
  Nicos

• How to open PDF files across multiple desktops in Windows 10 Adobe Acrobat Reader task view?

  I am running Windows on an Acer Aspire S7 10.

  The question is, when I open a PDF on your desktop and then move to another office using Windows task view, I can't open a new PDF file open on the new office. What is the reader is that it opens the PDF on the originating office.

  Could someone suggest how to solve this problem, which is to make a file PDF open in new office and not the original?

  Thank you.

  Hi torezhan94,

  Please open Adobe Reader.

  Click Restore to the low next icon in the upper right corner.

  Move to the next screen and shut up (do not maximize)

  Open it again and now maximise

  Subsequently, it will open on the other screen.

  Thank you

  Abhishek

• How to access my files on multiple devices?

  I have several file on my computer saved in Adobe Reader format.i like to access those files on my Tablet and phone mobile devices via my Adobe account.how do I do that?

  Send them by https://cloud.acrobat.com/files

  You can do this on the website directly, or download them via Adobe Reader, and then access it from Adobe Reader on all devices.