How to play 'beep' of the PC speaker

I used the Beep function in CVI, but the sound card generates the soud BEEP. I want speaker PC generates the sound SIGNAL. Please help me. Thank you.

Advertisement

The programming interface (toolslib\toolbox\toolbox.fp) Toolbox provides StartPCSound() and StopPCSound(). They should do.

Tags: NI Software

Similar Questions

  • How to play audio through the headphones and computer speakers, at the same time.

    Hey I just need to know how to play sounds through the headphones and speakers. Help

    Depends on your audio device.

    If its edge, while normally when you plug the headset switch will cut off the speakers.

    If you have a USB or Firewire pro device you can listen to your headphones as the signal played through your speakers.

    See you soon,.
    Jerry

  • Is it possible to play music from the iPhone speaker bluetooth while that paired with a Apple Watch?

    without the synchronization of music at the shows?

    I have music on my iPhone. My iPhone is paired with the bluetooth speaker and Apple Watch. I can hear clicks of typing etc arrived via bluetooth speaker, but the music does not work. Is the only way that this is possible by disconnecting him my watch or sync the music to the watch and then play from there?

    Hello

    Go to ibooks download Apple Watch user's guide it's free

    Do this on the iPhone.

    See you soon

    Brian

  • How to play music through the bluetooth earpiece/headset

    Original title:
    I HAVE CONNECTED MY HEADPHONE BLUEDIO AV890 WITH MY PC... BUT HOW CAN I HEAR MUSIC FORM MY PC THROUGH IT...

    I CANNECT THE BT HEADSET USING PASSKEY... BUT I DON'T KNOW HOW TO PLAY SONGS VIA HEADPHONE BLUETOOTH, SOMEONE CAN HELP ME

    Hello

    T

    Hank you for the display of the query in the Microsoft community!
    We will guide you through this issue.

    You receive an error message?

    You can try the following steps and check if you are able to hear the music from your computer

    Method 1:

    You can configure Bluetooth headset as default Audio Device.
    a. click Start, click run, type mmsys.cpl and then click OK.
    b. click on the Audio tab.
    c. in the sound playback section, select the headset and set it as your default device.

    Method 2:
    You can update the latest drivers for the Bluetooth drivers on the manufacturer's Web site.
    How to manage devices in Windows XP
    http://support.Microsoft.com/kb/283658

    Just reply with the results. I'd be happy to help you further.

  • How to play involved when the headset is not connected?

    original title: problem of speaker and headphone

    my speaker in the lower-right corner icon said speakers and the headphones and I don't know how to isolate the speakers to play only when there is no helmet and isolate the speakers when I plugged headphones

    Hi JonathanStellino,

    Thanks for asking! If I understand correctly, you want to set the audio output device by default. I suggest you follow the troubleshooting steps to check if this may help.

    (a) click Start, in the search box, type "Change sound card settings" or "Manage audio devices" without the quotes.

    (b) click Manage Audio devices.

    (c) click the sound, click the play tab.

    (d) click the device you want to set as default.

    (e) click on set as default, click apply.

    f)       Click OK.

    You can also run this Troubleshooting Audio troubleshooting and check if it helps fix the problem.

    Just reply with the results. I'd be happy to help you further.

  • How to play mp3 in the simulator of Tablet

    I want to integrate its App, the snippet of code as follows:

    Sound/speakers in the Simulator do not currently work.  We hope that in the next version of the SDK.  If it works as an AIR application, you are safe to assume that it will work on the device end probbly.

  • Zoom H4n Audio stereo plays only the left speaker - how to double?

    Hi all

    I've worked on several projects and I noticed that the audio captured by the Zoom H4n will preview in both speakers (and before as I slide the mounting I can right-click-> edit-> Audio channels and get options there but also hear it on both speakers) but as soon as I drag him in the timeline it will play only through the left speaker.

    Any ideas where I'm wrong or how I can double the audio? It is all already cut together so I hope that there is a difficulty which is semi time efficient to apply lol. Thanks a lot for your help.

    -Karl

    Since you are already done with the change, your quickest fix is to use the left audio effect fill (Audio Effects > stereo > left fill). Apply it to all the clips that do not play in the two ways; It will duplicate the left channel in the right. The fill right effect would be the opposite.

  • instructions on how to play are not clear for beginners. (Hearts).

    I would like to completely detailed instructions on how to play hearts. The instructions that came with the game are vague and can be understood by a novice. I would be most obliged. Sincerely, Robert Wingard.

    Hello

    ·         What operating system is installed on your computer?

    ·         Are you a reference to the game Windows or online game?

    IF you referring to the Windows game. You can have a look at the link:

    http://Windows.Microsoft.com/en-us/Windows7/hearts-how-to-play

  • How to play the next song with the repetition of the same song over and over again

    How to play the next song with the repetition of the same song over and over again.

    In this screenshot, shot an Apple article, you can see four icons at the bottom of the screen. Look at the third argument of the right, with the two arrows going in a circle. It's the repeat function. When turned on, you can tap the icon to turn it off.

  • How to play the QTVR mov in IMAC

    I have create a QTVR mov file in 3d software. Anyone know how to play the QTVR mov in iMAC? Quick time could not play it.

    You need to install QuickTime Player 7

    Download QuickTime Player 7 for Mac OS X 10.6.3 or later

  • How to play the song with .wma extension

    How to play the song with .wma extension

    If it does not DRM, use VLC. If so, no Mac OS X software can play or convert.

    (142864)

  • How to play the video file from Gigashot A40FE?

    I have 40 GB A40FE cam gigashot.

    I can't able to play the video file from this cam. no support for the folder.

    Please give me answer.
    How to play that format or I want to convert or download any player for whom?

    Hello

    Have you tried to read this file using the VLC Player?

    It is a small player and the best is that it is just for free! :)
    He plays most file types, and I think that you should test.

    See you soon

  • How can I link to the top a game PS3 controller to my PC so I can play a game on it?

    Hello

    How can I link to the top a game PS3 controller to my PC so I can play a game on it? I recently bought Bioshock for PC and I can't get my PS3 DUALSHOCK controller to work.

    Thank you!

    You can not, not with a PS3 controller. Well, there is a way but you will need to run an emulation of sorts and it is not native, so you'll need to understand on your own. Otherwise the xbox controller is native with Win machines, then you want to try this for a plug and play solution.

  • How can I disable standby/hibernation / startup emits a beep and the sounds?

    I have a Lenovo Thinkpad x 200 running vista Ultimate edition. 7454 - cto of type

    How can I disable those annoying beeps that sound whenever my computer goes in and out of standby and Hibernate.

    I tried to transform the model of 'No sound' sounds, but the tone still sounds when the computer enters and wakes from sleep and hibernation.

    If I turn on "mute" is put into standby or Hibernate mode, the beep does not sound (which is what I want). Unfortunately, its impossible to come back on MUTE when im trying to put the computer away from the sleep or Hibernate (which makes it very distracting to turn on the computer during the class).

    Solution:

    Enter the BIOS by pressing F1 during startup

    > Config

    > Beep and alarm

    Tone control power set to [Disabled]

    Your solution is correct, but I think it's also accessible under ThinkPad Power Manager software. Go to the "Global settings" tab and choose "beep when the power state changes.»

  • How to stop a beep when the loop ends

    Hello

    I have a beep occurs inside a loop (which contains waves of data acquisition) to a certain threshold. I want the sound system for not introducing any delay in the execution of the loop.

    But I also have another beep when the loop ends. How to eliminate this noise?

    Your comments will be greatly appreciated. Thank you

    PI

    The obvious answer would be: remove the beep VI this is probably. Please show us your code.

Maybe you are looking for