How to play involved when the headset is not connected?

Similar Questions

• G42-461TU: Laptop hangs when the charger is not connected in

  Hi all

  I use HP G42 - 461TU Notebook.I have a problem with my laptop. He often gets crash when the load increases. Once when the charger is plugged in, it works fine. But when the charger is disconnected, it gets even once block. I thought it might be due to problem of memory and I added extra 2 GB DDR3 RAM too (totally 4 GB now), but the problem persists. Now I use windows OS 10, but I faced this problem with windows 7 too. Can someone please help me diagnose the problem with my laptop? Thanks in advance!

  Hi @Dinesh_R,

  Welcome to the HP Forums! I read your post and wanted to help.

  I understand that your notebook crashes when the charger is not connected. You can start with this document: computers HP - computer is slow (10 Windows)

  Let me know if that helps the problem.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• Our published application crashes when the user is not connected to WiFi

  It became clear after the last launch edition our published application crashes when the user is not connected to WiFi.

  This is a new one on us, someone at - it ideas?

  There was a bug in all versions of Viewer 24 and earlier that have arisen during the last iOS updated acme outside. If you upgrade to v25 or later version the issue will go away.

  Neil

• How change the default resolution for windows to use when the monitor is not connected

  Hi, how can I set the resolution by default that windows uses when the monitor is turned off or not connected at all? My problem is that normally I use 1920 x 1080, but when I put the pc to sleep or just turn monitor and leave it like that for a while with a few app maximized, when I get back and turn the monitor on the resolution is correct but the enlarged window is resized to 1024 x 786 resolution. I tried to change in the registry DefaultSettings.XResolution a DefaultSettings.YResolution in all instances and it worked fine for a long time. Then some update that happened and now it no longer works. I reinstalled the system, but it still does not. How can I force windows to use always the 1920 x 1080?

  It seems that TMM disabling did the trick. Maximized windows are not yet moved to the left edge of the screen, well, those who have been maximized is maximized correctly as they should. I had to disable TMM through registry as I had no MMR in Task Scheduler.

  If anoyone is interested I've followed the instructions described here:

  http://superuser.com/questions/120983/how-to-disable-monitor-auto-detection-in-Windows-7

• How download Photoshop CS6 when the link does not appear on my account more?

  Hello,
  I have Adobe Photoshop CS6 Extended Student and Teacher Edition.It's the last version you could have without paying each month for Photoshop suscription..
  I would like ton reinstall it on my computer as Bridge doesn't work anymore.
  But i can't download again my software because there is no link anymore on my account
  Please help...
  
  Thanks a lot!
  			 
  Hello
  You can use the link here Download Adobe Creative Suite 6 applications
  Let us know if this helps!
  		   

• How to open documents when the password is not working?

  I recently tried to open documents, and I am not able to open. It requires a password. I put a password in that computer will not let me. I don't have a subscription, I never have. If I go back to a previous version of Adobe will be that it let me view my documents

  That is right. If it is password protected (in other words, if Adobe Reader is asking for a password and not your system or something else), this means that anyone who has created or at least somebody who was in possession of the file with the full version of Acrobat has added a password. It must be that.

• How to play audio through the headphones and computer speakers, at the same time.

  Hey I just need to know how to play sounds through the headphones and speakers. Help

  Depends on your audio device.

  If its edge, while normally when you plug the headset switch will cut off the speakers.

  If you have a USB or Firewire pro device you can listen to your headphones as the signal played through your speakers.

  See you soon,.
  Jerry

• How will I know when the synchronization is complete?

  Hello
  Is someone can you please tell me how do I know when the synchronization is complete?

  I paired a device (smart phone Samsung) - it worked good 10 minutes, yet on my phone says sync is complete, but any of the bookmarks do not appear on my computer 'main '.

  Hello.

  It is possible to "Synchronize now" in the version of office when you go to tools > synchronize now
  You can check the timestamp of the last synchronization status in the topic: config page one and find the last sync, and there will be a timestamp it. Firefox Sync troubleshooting and tips for more information.

• Stolen phone. How can I check when the last time saved my phone to my laptop (without my iphone of course)?

  My iPhone was stolen. How can I check when the last time that I backed up my phone to my laptop without my iPhone?

  Click here and either use iTunes to check or browse to the path of the backup manually.

  (142338)

• How to change existing keywords when the site is not in the bookmarks bar?

  I've implemented several shortcuts keyword for sites that I use frequently. Now, how can I change the keywords or URLS when the site is not in the list of bookmarks? Is there a master file Firefox for these access which can be edited by the user? Or another way to get to them?

  Not sure if it's the same on Mac OS x, but it is how it is done under Windows and Linux versions of Firefox.
  
  Bookmarks > organize bookmarks
  
  Highlight the bookmark in the right pane, and then click more at the bottom to see the keywords and Description fields for this bookmark.

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• How will I know when the capsules are on?

  Original title: caps Inspiron 1545?

  How will I know when the capsules are on?

  Hey, Vince,.

  Caps lock key are you referring?

  If you look above the keyboard on the right, you will see two fires instead of one.

  In addition, you will type in uppercase when the key is turned on

  

• How can I click apply when switching back resolution lower when the window does not display the Apply button when

  How can I click apply when lower resolution when the window does not display the button apply because the resolution is too low

  Hello

  Try pressing the ENTER key on the keyboard instead.

  See you soon.

• How to print photos when the display screen is white? The image is missing in it.

  How to print photos when the display screen is blank?  It shows only a white screen empty when I select the photo and press on print.

  You click on a film image in the print module? And, I guess you don't have to go to the Print module, right?  Additionally, make sure that you have chosen to make a custom package.  If you chose the custom package you need to drag and drop images and organize them.

• How can I detect when the last container in my stream is full?

  I have a bunch of related containers which I am flowing text through. How can I detect when the text has filled a container? There's an overflowPolicy then I guess it can be detected.

  Hello

  I used this:

  private function IsOverset(textFlow:TextFlow):Boolean

  {

  var zeComposer:IFlowComposer = textFlow.flowComposer;

  var iTextLen:int = textFlow.textLength;

  var iNoController:int = zeComposer.findControllerIndexAtPosition (iTextLen - 1);

  return (iNoController is-1);

  }

  HTH,

  J.