How to play music and narration at the same time on windows movie maker?

Similar Questions

• How to use headphones and speakers at the same time

  I want to use headphones at the same time that I use the speakers.

  I am hard of hearing and need the LOUD volume. When others are watching a film, projected on HDTV, they won't let me turn the volume up to where I need it, which is why, headphones and speakers at the same time.

  I use Windows 7, I want to stick with Windows 7, so I want a Windows 7 solution.

  If there is no solution for Windows 7 and there is a solution using Windows 10, then and then only, I will be upgrading to Windows 10.

  Using headphones and speakers was possible under Windows XP. I think that a kid at Microsoft, with a regular audience, thought this feature was redundant and removed. Large.

  Macs will play through the headphones and speakers, so maybe it's time to buy a Mac!

  Hi Bob,

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you want to use headphones and speakers at the same time on your Windows 7 computer. I will certainly help you get this fixed number.

  I suggest you check the suggestions contained in below mentioned thread and check if this is useful:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/headphones-speakers-at-the-same-time/7ed31bcf-3762-430D-9c9f-e6967d670d0e

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• How to play several audio files at the same time and mute toggle some voices?

  Hi all

  Forgive me if this is mentioned elsewhere and kindly point me in the right direction.  I'm a kid with flash and action script so if you are in doubt, error on the side of more specific in your response, there is a lot of vocabulary I still don't know.

  The goal:

  I have 4 audio files which are Soprano, Alto, tenor and low voice of a musical example.  The result should allow the user to play all 4 voices at once and dumb voice specific to hear all the possible combinations of voices playing together or solo.  I imagined a check box at the beginning of each rated musical line that puts that voice muted when checked.

  It would be ideal to have the game, interrupt and stop reproduction choices where 'Stop' resets playback at the start and 'Pause' maintains the current place in time and takes over from there, once playback is started again.

  I am able to get the simple audio files to play from a single button, but I am struggling to find how to link multiple audio files to start at the same time by a single button.  I found this link: https://forums.adobe.com/thread/1069107?start=0 & tstart = 0

  where the last message mentions the use of tables, but being a complete beginner, I don't completely understand what they are doing.

  I know it's a big piece of questions at once, but if you could meet any part of it, or direct me to a tutorial/instructions, I would really appreciate it.

  Thank you for taking the time to help others

  use:

  kglad wrote:

  use:

  import flash.events.MouseEvent;

  import flash.media.SoundTransform;

  var soprano: Sound = new Soprano();

  Var high: Sound = new Alto();

  var tenor: Sound = new Tenor();

  var bass: Sound = new Bass();

  Ash var: Array = [soprano, alto, tenor, low];

  var offsetA:Array =]

  var st: SoundTransform = new SoundTransform();

  play_btn.addEventListener (MouseEvent.CLICK, playF);

  pause_btn.addEventListener (MouseEvent.CLICK, pauseF);

  stop_btn.addEventListener (MouseEvent.CLICK, stopF);

  playF function (e: MouseEvent): void {}

  for (var i: int = 0; i)< sounda.length;="" i++)="">

  This ["sc_" + i] = [i] Sunda () .play;

  }

  }

  function pauseF (e: MouseEvent): void {}

  for (var i: int = 0; i)< sounda.length;="" i++)="">

  offsetA [i] = this ["sc_" + i] .position;

  This ["sc_" + i]. Stop();

  }

  }

  function stopF (e: MouseEvent): void {}

  for (var i: int = 0; i)< sounda.length;="" i++)="">

  offsetA [i] = 0;

  This ["sc_" + i]. Stop();

  }

  }

  function unpauseF(e:MouseEvent):void {}

  for (var i: int = 0; i)< sounda.length;="" i++)="">

  This ["sc_" + i] = Sunda [i] .play (offsetA [i]);

  }

  }

  function muteF(i:int):void {}

  St.volume = 0;

  This ["sc_" + i] .soundTransform = m;

  }

  function unmuteF(i:int):void {}

  St.volume = 1;

  This ["sc_" + i] .soundTransform = m;

  }

• How do cancel you title overlays in the clips selected in Windows Movie Maker

  How to change or remove titles that have been superimposed in some video clips in Windows Movie Maker?

  In Vista Movie Maker 6... switch to timeline view
  and watch the track title/overlay.

  You can... right side click/delete...the titles.

• Impossible to listen to music and tell at the same time

  The storytelling & music in Windows Movie making

  IAM not able to play the music and narate when I'm wrong.

  IAM not able to play the music and narate when I'm wrong.

  =======================================
  In timeline view... in addition to any audio that may be included
  You can add an extra layer of music on video clips...
  audio / music.

  If you want to add another layer of sound (music, narration, etc...).
  you will have to publish (your project to save movie .wmv format)
  in a folder on your hard disk and then reimport the .wmv file saved
  and drag it on the timeline. (this would create a new project).

  Now you can add another layer of sound to the audio / music.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to share text and image at the same time using Blackberry invocation framework

  Hello

  I need to share the text and its corresponding picture to FB, Twitter and BBM using the framework of invocation of blackberry. No invocation framework support for images and text sharing simultaneously.

  When I use the mime type as text/plain, the url of the image and the text is shared and when it is image/jpeg is used only the image is shared and not the text. Here is the snippet of code used.

  ShareDataTo=function shareTo(key) {
  //shareImage();
  var text ="";
  
  text = itemObject.myName +"\n My Age : Rs."+itemObject.myAge+"\n Address "+itemObject.address+"\n"
  try
  {
  blackberry.invoke.invoke({
  target: key,
  action: "bb.action.SHARE",
  type: "text/plain",
  data:text
  });
  }
  catch(Error)
  {
  //alert('in ShareDataTo error '+ Error);
  }
  }
  

  Help, please

  Kind regards

  Annuk

  This is not currently supported.  Now, you can make a text or an image, but not both.

• Share WiFi and LAN at the same time on Windows 7

  My Windows 7 laptop uses the following adapters to connect to the network

  LAN: Realtek PCIe GBE Family Controller

  WiFi: Ralink RT3290 802.11bgn Wi - Fi adapter

  The problem that I am facing is every time if going to any site for work. The internet connection is no longer available through WiFi for the use of internet services to access email and the web.

  And then I need to connect to the network local work to access their private network for work purposes who do not have access to the internet, but only access to the private server.

  When I try to connect to two networks simultaneously connection WiFi automatically becomes the parent connection and disconnected from my local network access to servers.

  Please help me with the same read a few forums on metrology, but could not reach the concurrency.

  Afonso Hello,

  Thanks for posting your concern in the Microsoft community.

  The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. I would advise you to ask your question in the Technet Forum, where we are the support technicians who are well equipped with the knowledge on these issues.

  I suggest refer you to the following link to go to them and post your query there:

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=win10itprogeneral&filter=AllTypes&sort=lastpostdesc

  It will be useful.

  Thank you.

• How to use Notepad and utube at the same time on an ipad?

  Is there a way to mulitask with two apps on the iPad, I want to take notes while watching a utube video?

  only on the most recent iPads that supports multitasking side by side

• on the Iphone 7. How to listen to music, if we have a normal headset and charge at the same time?

  How to listen to music, if we have a normal headset and charge at the same time?

  < re-titled by host >

  It sopposed must be a wireless charging dock to be launched shortly if the dock does not so it is a disappointment

• Request of MSN Games I want to play Spades with my friends, I know personally, and also at the same time, they are online in MSN Games.

  Original title: query MSN games

  I play generally stings in MSN Games. I play with these opponents, who are are the corresponding animation.

  But suppose I want to play Spades with my friends, I know personally, and also at the same time, they are online in MSN Games.

  Is there a way I can do?

  Yes ReCkle$ $ there is a way

  because deleted msn games this option of Spades online, u do not have the section 'invite' as b4, you will need to:

  (1) you and your partner open Spades and click on the 'standard' at the same time game. After a 1 ~ 5 try u should be and your friend partner at the same table.

  * your 'level' and your partners must be close to u at the same table.

  Hope this helps :)

• How do I get the acceleration and GPS at the same time?

  Goal: Get an acceleration and GPS at the same time

  Current situation: I can get acceleration or GPS. When I try to get the data, the code ends.

  Mini Code

  If (bps_event_get_domain (event) == sensor_get_domain()) {}
  handle_acceleration_data();
  }
  If (bps_event_get_domain (event) is {geolocation_get_domain()})

  handle_gps_data();

  }

  Question: Anyone know how to get data in an event or other methods?

  Thank you for your attention,

  Your code shows event handling, but not the request or to obtain events.  Can you show more of your code?  The following should work (note there is no error checking):

  sensor_request_events(SENSOR_TYPE_ACCELEROMETER);
  geolocation_set_period(1);
  geolocation_request_events(0);
  
  bps_event_t *event;
  while (true) {
  
      bps_get_event(&event, -1);
      if (!event) {
          continue;
      }
  
      if (bps_event_get_domain(event) == sensor_get_domain()) {
          handle_acceleration_data(event);
      } else if (bps_event_get_domain(event) == geolocation_get_domain()) {
          handle_gps_data(event);
      }
  }
  

• How to share the Image and the text on Facebook and Twitter at the same time?

  Hi, I made a text box enter the text and also produce the selector to choose the image.

  So I text and the imagePath.

  How to share this text and image for facebook and twitter at the same time?

  (the example is like checkin on Foursquare app for BB10)

  [* If you use the invocation sharing, I can't pick one, ex: come share on facebook]

  Thank you

  It is not currently supported.

  http://supportforums.BlackBerry.com/T5/native-development/share-text-and-photo-for-the-same-invocati...

• How many computers which can install you programs CC on and how many computers can use programs at the same time? [was: Question for you!]

  When you buy an individual monthly plan for CC at $50 per month, how many computers which can install you programs CC on and how many computers can use programs at the same time?

  Thank you for your answer!

  You can install the software on two computers. These two computers can be Windows, Mac OS, or everyone. If you install on a third computer, you will be asked to turn off this feature on the other two computers. You can then re-enable one of the two previous computers and use Cloud Creative apps on it. You can use apps on a single computer at a time.

  Kind regards

  Hervé Khare

• Satellite M30X-122: how to use the headphones and speaker at the same time?

  Hello

  y at - it a possiblity to use headphones and speaker at the same time?
  When I plug the headphones into the Jack, the speaker is created off the coast of the moment.

  Thank you
  Peter

  Hi Peter,.

  There is unfortunately no way to use both headphones and speakers at the same time. This is because tghere's a disconnection physical power for the internal speakers when you plug in the headphones. It is not by software. The only way around this would be to dismantle the headphones Jack and solder connections that are broken when you insert the headphone permanently.

  Kind regards

• USBOTG and Charge at the same time on Stream 8

  To keep this thread as productive as possible and efficient for those who find it useful to:

  Unless you have under your eyes

  1. a schematic representation of the 8 Stream USB port (USB port and battery electric circuit etc.)

  2 source code for the firmware BIOS and kernel that controls the material

  Please DO NOT respond or say "is not possible".  In view of the above is true, you do not have enough information to say '' not possible. ''

  If no one replys with a solution, what he calls not possible by default.

  Also please do not answer to say ' I don't know how "or" but I know how to do anything else that ' is also not that useful.

  An update of the BIOS or other software update may be required by HP, Microsoft or both to offer this feature really intuitive and quite possible.

  And I hope that this thread can be an effort consolidated by all who have the 8 flow to make the necessary changes.  The majority of the other tablet PCs are capable of it.  It seems that only the 8 Stream and a few others have trouble with her.

  ~~~~

  I want the ability to use a simple, inexpensive cable and perhaps standard (with electronic active minimum inside) which allows me to host and to use one or more USB devices on the Stream via its USB port B microphone 8 while this cable can also be connected to a charger standard and charge 8 flow simultaneously.  This means that the cable has a minimum of three connectors.  One of the possible configurations are as follows (apart from the normal charging cable):

  1 cable Micro USB B Male - connect to the stream 8

  2 USB male A - connect to the AC charger (IE one that came with the 8 Stream)

  3. USB A female - one or several connectors to plug into the key of USB data, keyboard, mouse or even a hub.

  Connector # 2. above shall provide a power supply to recharge the 8 Stream via conn. #1 and the power supply for external USB devices via conn. #3 so that they are in use - all at the same time.

  A and if the same cable can act as a normal OTG no charger for when no external power supply is available.  This may necessitate a switch or an electrontics active inside.

  The last part of this goal is unimportant for various reasons.  I wish that HP, the manufacturer of 8 flow, to State in writing good mode necessary to do this, so that other manufacturers or even-it yourself can make maximum use of their tablet HP equipment.

  ~~~~

  The neat thing it will alow a person to do with their tablet, it is to work at home using the Tablet as a desktop PC by connecting a keyboard, mouse, perhaps external screen (with USB to the display adapter) and knit for a long time without time limit prescribed by the battery life because the charger provides energy to all involved.

  If there is only a single connector on the cable #3, then an additional node of coarse had to provide support for these multiple USB devices at the same time.  However, it would be better if there were several #3 connectors integrated in the cable itself.  This would be better as a suitable USB hub also requires its own power.  That an adapter is necessary if the whole thing were integrated into one.

  ~~~~

  I really want answers from anyone who has already accomplished USB OTG delivered with simultaneous load with flow 8. (independent of any published 'proper' way is also welcome)

  Today's date is 2015-01-16.  If in 2015-02-16 (one month), nobody has posted a solution and then starts to bug HP and Microsoft on it's us?

  ~~~~

  Technical training:

  I understand the possibility the tablet software and firmware must take a decision on the manner in which power flows on the power port USB microphone B pins.

  I know that with a proper design of the electronic circuit carring these signals of power inside the Tablet could be sensitive to what is connected and without risk to decide for himself what to do without needing to control software.  For example by testing/detecting periodically differential voltage or current management to see what sides of the connector can supply.

  But this is only one of the many "could bes".

  In addition, this can be no standard regarding the standard USB.  What seems to be actually the case with a lot of cables OTG + fresh, is that physical clues embedded in the cable or charger are used to signal to the Tablet what the situation is.  Then the signal of software/firmware of the Tablet, interprets what the situation is intelligently and responds by flipping the bits of correct hardware control to activate, or deactivate the power flow in the port and also control its direction in or out.

  I'm not familiar with the standard USB.  Maybe I could do more research, if I believed that HP followed with 8 Stream or even the standard covered this situation explicitly.

  But to a certain extent, it seems I'll have to invent something that should be intuitively just like it does with other tablets. Isn't it?  Maybe I'm overthinking, but I can't find any USB OTG + cables load that specify compatibility with 8 HP flow.

  In any case, I was familiar with both methods other use of tablets to send the highest mentioned signal to the hardware/firmware/software of the tablet to the idea that it's time to load / time of OTG or both.

  The first method is a 0 Ohm to 200 ohms short between pin USB A 2 and 3.  This is the bidirectional data differential lines D - and D + respectively.  In data mode, all the data passes back and forth on those lines.  When you load with a cable, it's the charger module that puts this short, not on the cable.  I measured the short on three different Chargers.  It is 0 Ohms on two of them, one of those who are the charger that came with the 8 HP flow.  The others 0 ohms was generic.  The third was for an apple iPad and it measured on 53KOhms.  It's probably not the resistance ohms 0-200, but probably it is impedance termination indicating that there is some intelligent serial port communication in the charger itself.  Leave it to Apple to be different.

  This method is somewhat questionable, as this signaling mode would prevent OTG + fee because it seems unlikely that you will be able to OTG when the data lines are shorted each and overloaded with such low impedance.  I could be wrong on this subject...

  The other method I have seen suggested to work with some tablets and phones other than the 8 stream is too short the USB microphone B pin 5 to Terminal 4 with 0 Ohms to 100 000 Ohms.

  USB B has 5 pins.  USB has only 4.  The extra pin on B moves the GND pin 4 pin 5 pin to and makes pin 4 PIN ID.

  If this signal applies to a drop in the ID pin (4) or in some cases, I saw that she proposed, he runs down with 0 Ohms.

  Dead shorting things always makes me nervous.  If ID is a simple normally high impedance high input, resistance could be used to make voltage well below the low or zero threshold while also preventing the risk of damage when cheat on him with a device that you do not have the diagram for.

  Yet, 100K is a bit high for a 'pull down' in most of the situations that I'm used to.  Even a 10K would be uncertain. A 1 K or 2 K seems reliable enough, but then things are weaker and in know more nowadays low...   All but a dead short but if possible.

  So, it seems possible that the device might be able to "indicate" by the specific value of the resistance, which can be found here.  In other words the resistance is not a pull down but in fact a signature analog ID, in which case the exact value will be crucial. So if this is the case, a guess is not going to work.

  Obviously in such a system as described above, a chip inside the Stream 8 should be responsible to support this information. I hope the 8 Stream has such a chip.

  Probably a register inside this chip would be at all times what the State of the pin ID is a binary number.  All that is needed is for the BIOS to the chip and the registry in it and read this number via the bus to determine what happens to the port. Finally, he would use that signals of info to send the order of material to the electrontics of power set the appropriate direction to take etc.  (and change the State of the icon on the screen of the rude)

  I don't know if the PIN ID method described is a standard USB or not either.

  Eventually, there may be a third way. But I do not suspect that it would be possible with a non-active external device. In any case too complicated for the novice DIY for sure.

  The device would need to act is a kind of extension of bus.  As an active hub.  But she would use the negotiation of data USB serial lines and in addition to reproduce one or more additional USB ports, intelligently inform the tablet to get with the program which is "now we're going to otg and recharge at the same time."

  This requires a smart external device with a processor Inside, no doubt.

  It seems to me that many other tablets have been able achieve avecjoint here the need for a smart external device and thus the flow must also be able to do.

  There is a device that claims to be able to work with the HP Jet 7 and 8 and provides same ethernet and USB and big DVI ports so loads the data stream.  But its expensive because it is active.  Se here:

  http://AMZN.com/B00OVDE0GC

  It's called a "Docking Station".

  A reference to a product that does exactly what I want (possibly without active electronic components) is here:

  http://AMZN.com/B00LTHBCNM

  It's by Kirin and it is a device of type squid with four USB ports.  Precisely, which is my goal.  But read in the comments stream 7 user indicated that he would not be OTG and load, not really clear if it worked as a hub USB OTG or not.  Another evaluator stated that she would not support even a single USB device much less fees of 8 Stream.  This device has a switch.

  I forgot to mention that some 'hackers' have claimed success with other tablets to deceive their devices by using a multi-step process to plug things in.  Usually in general they would get connected Tablet and load first, then they would return a switch or something remove some resistance or the signal was introduced by the first position of the switch. For some reason any Tablet would continue to require. Then the data lines would be free and they would plug in a usb key and it mounts correctly even if the tablet was always in charge.

  It's like the power circuit has a lock which does not allow it to return to the mode "power flow" as long as he still feels the power flows inward regardless of what software it is telling.  Full proposal here.

  These tips seem dubious to me.  Changes in the BIOS could change the way it works.  Also you can not be sure what actually happens if you do not have a schematic representation.  You could damage your tablet.  Many people will support icon in the operating system whether the Tablet is in charge.  But I'm sort of a low-risk guy and my policy is generally indicators of intereperet not to have meaning at all once a device is functioning in a non-standard setting.  Especially when it's something that I did not built and could not fix if I FRY.

  Hypothetical reasoning: tell me what data sensory discs really the State of the charging light screen?  This reflect the bit of hardware control programs actually feeding management and status on the port?  Or does it measure the direction of the flow of power, said in the section of the circuit battery monitoring?  Point - none of us have a schema because it's owner. To really be sure according to the smart electronic hardware, the port must be mode flow under advisement "of power. If it's in a "power flow out" mode and power will be delivered externally as well you wind upward with both power supplies the same power at the wheel nets.  In this case, the two opposing regulators attempting both to drive 5 V can have slightly different voltage calibrations.  That could lead to fighting between them, with more than 100% of their capacity.  For example if you try to regulate 4.95 real V and the other and other attempts to regulate 5.05 V.  Current then flows to the tune of 100 mV / a few milliohms in the cables linking the two.  This may be several amperes. (many)  In other words, like I said: you want the tablet to know that power is coming in don't go out and automatically hitting the internal switches needed for that to happen. Probably the icon should indicate this with precision, but in some wacky situation, he could not. There may be a chance that the icon could indicate the load and still be burning or focusing on some circuits of the tablet or the charger.

  Another thing, I could see that happening is if you play with these reported resistance types enough you might find a resistance value that winds up place the device in an intermittent condition.  In other words it keeps flipping back and forth quickly between OTG and fresh.  It can give the illusion that it works.  You can have marginal communication with your USB devices and battery could even load.  But will still be a lot of stress on the power circuit.

  It is difficult for me to risk a Tablet perfectly well if I don't know exactly what I'm doing.

  If a brave individual makes their own experimentation and verifies that it charges and OTGs and you tell the rest of us, you're a hero.

  Maybe one of you has a good knowledge on the USB standard to have more confidence in such an experience... like what the ID pin 4 REALLY supposed to work for example?

  That's what I know so far.  If you think you can help, thanks in advance, or if this helped you, then your quite welcome.

  It works

  http://Accessories.us.Dell.com/SNA/ProductDetail.aspx?c=us & l = to & CS = 19 & SKU = 470-abes & baynote_bnrank = 0 & baynote_irrank = 0 & ~ CK = baynoteSearch & dgc = CJ & cid = 47997 & lid = 4279734 & acd = 10550055-4485850-eb75dcb47e53437680ed323a1f4885fe

  Evidence

  http://targusblog.com/2014/11/25/how-to-turn-a-99-Tablet-into-a-workstation/

  But it's 4 x the price in Europe

  Have fun