How to print 1 page for each line of the numbers worksheet

Similar Questions

• How do I either set channel name of a graph of cluster or get a 1 d waveform chart to start different time (t0) for each line of the waveform?

  I have a chart single 2D out a conditional of a loop indexing output such that over the rows of the table are not the same size. -Basically, they have different starting and ending points and sizes. -Not so concerned by the endpoints, because as soon as I get correctly starting points, everything shows fall in place.

  The challenge is that when I try to have the variable t0 (start time) for each line, the wave of construction vi form would always keep each line at the same starting point.

  I used the approach bundled with success (the cluster approach ensures that each waveform starts at different times according to the guidelines of my t0 defined for each line) but then I'm not able to get in the channel names I could make using the graphical approach (wave generation) waveform.

  In essence what I get here, I'm losing here.

  Because I don't want one of my mentors, Bob and Altenbach have fed up with me I have attached a vi this time

  Attached VI shows a combination of the two attempts (first with the waveform graph) and then with the graph of cluster

  1. with the first (graphical waveform), I get my channel names as you wish, but the alignment of the wave is not correct.

  2. with the second (graphical cluster), the alignment is good, but I can't do the names of channel in the chart, even if they are present in the cluster.

  I read some reviews that mentions that attributes can be displayed with waveform and data Dynamics (not clsuters) so I guess that's why.

  I saw another report indicating the start time for a waveform 1 d will always remain the same for the rest lines defined for the first line even if changed for the following lines in a loop.

  So I guess my question is: what is the way around questions like that?

  First of all, let me be the first to the congratulate and thank you for finally posting a code!  I'm not 100% certain I understand your question or your code, but I have an idea, perhaps, of what you want to do, so I wrote a little VI who made something simple that could be relevant.

  You mention waveforms of different lengths and beginning at different times.  You also want everyone to have a unique attribute (although I'm not sure what you want to do with the attribute).  So, I did the following:

  1. Generated an array of 100-sample random to represent one second of a waveform.
  2. Created 4 waveforms on this 100-sample basis.  The first waveform (channel 0) is just these 100 points.  The second, 1 channel, is the concatenation of string 0 with the base of 100 samples, or a waveform "double".  Channel 2 is 1 string concatenated with the base, and channel 3 is 2 string concatenated with the base.
  3. In order to trace the four channels that they rest 'on' the other, the waveform has the number of the channel added to it.  Channel 3 is 3 + (4 copies of the basis of 100 points), a waveform 400-point random centered around a shift of 3.
  4. All channels have dt value 0.01 (but I guess I could have varied, as well).
  5. To make the channels start at different times, I started channel N N seconds before channel 0 (by subtracting the index of the loop, I, T0).
  6. For each channel, I created an attribute called "Chan" equal to "Channel N" (where N = 0, 1, 2 or 3, as the case may be).

  This is the plot that results. Scale X is the absolute time value (no Date) using the 24-hour HH: mmS format.  You can see that the plots are 1, 2, 3 and 4 seconds of time, and are offset from each other by a second.  I used the trace attributes to change the name to the respective attribute.

  

  The code to do this is very simple - I almost don't need to show it, because I think it is completely described by the text above, but this is here:

  

  Now, it was not that much faster that some of your previous posts, when you refused to your postcode, "guess us" what you wanted (but not to not correctly guess), you tried to "push" us in the right direction (still refuses to post code), and no one seemed very happy?

  Bob Schor

• Adding column which gives the serial number for each line in the Bulletin Board

  I use the update version 2 Jdev 11 g.
  I'm the filling of all employees from the emp table ADF table.
  My requirement is to add a column more as the first column and header line which displays the serial number for each serial number of row.the is not available in the table emp in database .i want to generate it dynamically when the data are filled in to ADF table.i don't want not to use the method to get the SQL query rownum. I want to get custom code (in the Managed Bean) or set all of the properties in the subject entity or any other object.
  
  Published by: sj0609 on September 8, 2009 09:43

  Hello

  Give an id to the table (say 'currRow') varStatus property. Add a column to the table (for example with a text output), then set it to the value of the output text #{currRow.index}.

  Arun-

• Add the check box for each line in the classic report

  Hello

  I created the report classic with checkboxes in each row and added the On-Submit process, BUTTON CONDITIONAL, to determine the behavior of the boxes. The process of PL/SQL is suppose to delete the selected row from the database.

  I get the success message, but when I check the database, the line is still present in the database.

  PLSQL CODE:

  FOR i IN 1.. apex_application . g_f01 . County LOOP

  DELETE
  Of
  Registry
  WHERE
  reg_id = apex_application. g_f01 (i); END LOOP ;

  
  

  
  

  
  

  ORACLE APEX: 4.2

  Thank you

  ApexNewLearner wrote:

  I tried the above solution, but I get the error message.

  Don't see no error message (maybe someone else was modulate the application). As I found it, the problem was the property view as of the column being Simple Checkboxvalue box. This type of display should be used only by generated by the wizard tabular forms, not with a apex_item.checkbox2 column. When the display type is changed to Standard report column, the row is deleted if necessary.

• How to access a column value in a Select list in a tabular presentation for each line

  Hello

  Environment: Using Oracle APEX v4.2.1 on an Oracle 11 g 2 DB

  In a tabular presentation using the following example query, i.e.:

  select
  "EMPNO",
  "EMPNO" EMPNO_DISPLAY,
  "ENAME",
  "HIREDATE",
  "SAL",
  "DEPTNO",
  "MY_LOV"
  from"#OWNER#"."EMP"
  
  

  I need access to every line of my sub form of table, the EMPNO of this line value, within a list of selection (query based LOV) in the column "MY_LOV."

  So, basically, the MY_LOV column in my table presentation, would be a list of selection (query based LOV) where MY_EMPNO =: EMPNO (first column in the select statement above), for each line of the tabular presentation.

  With the help of a picture ( Tom's Blog ) and assuming 'Deptno' column here is actually my new column, i.e. "MY_LOV, I want to know how this list of selection based on lov query would be able to access each EMPNO down in the form of tables, i.e. 7839, 7698, 7782 etc.?

  

  Any help would be appreciated.

  Thank you.

  Tony.

  Hi Tony,.

  Take a look at the API APEX_ITEM for LOV

  http://docs.Oracle.com/CD/E37097_01/doc/doc.42/e35127/apex_item.htm#AEAPI208

  Kind regards

  Brad

• Use: OLD and: NEWS in the triggers without oracle for each line

  I use Oracle 10 g.
  I want to insert a row in the table of the newspaper by each Witch of the query is executed on a table.
  And I want to insert on the line at a table of detailed log for each row changed in a query.
  I want to add modification date and time for each line in the two tables of the newspaper and I want it to be similar.
  
  So, I'm curious about using old and new variables without using for each row on the creation of the trigger. Is this possible?
  Or maybe I can score some variables static for this query (so sysdate will be the same and some of the Pavilion for the insertion of small newspapers)?
  Or maybe is there other ways to do it?

  LeopoldStoch wrote:
  But if I use sysdate in each trigger and it will update something as my sysdate 100000 lines will be different for different lines but I want it to be time and on the same date.

  Hi Leopold,

  Then today is your lucky day :-): sysdate is the same for all the DML. Even if it takes more than one second:

  SQL> create table rob
    2  ( id int
    3  , creation_date date
    4  )
    5  /
  
  Table created.
  
  SQL> create trigger t
    2  before insert on rob
    3  for each row
    4  begin
    5          :new.creation_date := sysdate;
    6  end;
    7  /
  
  Trigger created.
  
  SQL> set timing on
  SQL> insert into rob (id)
    2   select level
    3     from dual
    4  connect by level <= 10000
    5  /
  
  10000 rows created.
  
  Elapsed: 00:00:00.37
  SQL> set timing off
  SQL> select min(creation_date)
    2       , max(creation_date)
    3    from rob
    4  /
  
  MIN(CREATION_DATE)  MAX(CREATION_DATE)
  ------------------- -------------------
  07-05-2010 09:29:24 07-05-2010 09:29:24
  
  1 row selected.
  

  You can read more here: http://rwijk.blogspot.com/2008/07/sysdate.html

  Kind regards
  Rob.

• How to invoke Web service for each row of a result?

  Hello
  I have an application that has a report on my old system tables. But for every line of this request, I have to go to Oracle EBS and return a value. The simple approach would be to create a link of database between these 2 databases, but for reasons of security in my company, which is not allowed. So, I built a Web service based on a PL/SQL function stored in the database of the EBS. The Web service has been tested and it works very well. This webservice takes 2 parameters, and returns a number. I would like to call it for each line of the report query result, the parameters passing the columns of the query. Is this possible?
  Thanks in advance!
  
  Published by: Ygorc on December 17, 2009 16:09

  No, I suggested me not to use UTL_DBWS. Flex-ws-api is... Jason Comment should I say... much more flexible, functional and reliable.

  Tyler Muth
  http://tylermuth.WordPress.com
  [Oracle security application: development of secure database and Middleware environments | http://sn.im/aos.book]

• After the installation of update ver14.0.1, when you print a page on aweb site, why is that each line of the page to be printed each line on a separate page? !

  Each line in the document is printed on a separate page, IE: ten lines will print 10 separate pages for printing.

  Try of the reset described here:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer

  Make sure that you reset all the print preferences.

• Windows8 - how to print a page of a website?

  I have a HP envy 17 notebook pc, windows 8.  How to print a page of Web sites, such as Amazon.com?  Tried Ctrl + P, but there is no option for printing a page.

  Hi zenshemag,

  I understand that you have a problem printing just one page of Web sites. I will do my best to help you solve this problem. I suggest using the HP update and update the laptop.  What web browser do you use? Try using Internet Explorer. You should be able to right click, choose print and the print properties page should appear. Before you choose printing look at the page preview before printing, it will tell you how many pages is selected for print and what are these pages.

  Let me know if this helped, or if you need assistance.

  Thank you

• LabVIEW allows to read an Excel file to a control and add a checkbox for each line

  As say the topic, I need to use labview to read an excel file and show it in a control, such as mclb; I should add a checkbox for each line then allow me to choose the line I want. What should I do? Thank you very much.

  guiming wrote:

  I can read an Excel file to a spreadsheet, but I have no idea how to do to add a checkbox for each line.

  Sometimes, all you need to do is Google. https://decibel.NI.com/content/docs/doc-25000

  http://www.labviewing.com/check-box-in-multicolumn-ListBox/

• How can I make a cell formula will apply for the entire column? For example D2 appears B2 - C2. How can I copy this formula for each cell in the column?

  How can I make a cell formula will apply for the entire column? For example D2 appears B2 - C2. How can I copy this formula for each cell in the column?

  If you want the formula is the same (B2 - C2) in the cell of each column you must change it as ($B$ - 2$ C$ 2). Then copy it, select the whole column and paste.

• How can I get pages for free if I already have the last update and it doesn't show up on my macbook air?

  How can I get pages for free if I already have the last update and it doesn't show up on my macbook air?

  What to do if you already have?

  Peter

• How to print an index for a directory?

  original title: print the directory

  How to print an index for a directory?  At home I run Windows 7, but I really want to do this at work - OS is Vista Business

  You mean "how to print a list of the directories?
  http://www.Google.com/search?q=how+do+I+print+a+directory+listing

  How to add the feature print directory for files in Windows XP, Windows Vista, in Windows 7
  http://support.Microsoft.com/kb/321379

  HTH

• Is there a way to automatically assign the first fields of each page for each participant?

  I send you a document to three people to sign and each person needs to initial each page. Is it possible to automatically add an initial field on each page for each participant, or do I have to drag the initial field to each page for each participant?

  It is a unique document, BTW.

  Hello Joannaw75509803,

  You must manually add each original field at the location in the document and also, if you wish, you can use text tags that you add to the document before downloading in EchoSign and form fields would be created automatically. This is the same documentation:

  https://helpx.Adobe.com/document-cloud/help/adding-Esign-services-agreement-fields.html

  Kind regards

  -Usman

• measure the actual page for each page size in the listbox

  Hi guys,.

  I'm trying to write a script that lists all the pages in the ListBox with 2 additional columns: width and height

  and stuck when trying to get the limits of pages for each page in the document.

  My result looks like this now:

  

  script no matter what I'm trying to get only the size of the 1st page and fill in all items.

  My code to get the size of the page above is:

  myDoc = app.activeDocument;

  page var = myDoc.pages [0];

  ...

  function myRealHeight() {}

  var Pbound = page.bounds;

  var pH = Pbound [2] - Pbound [0];

  var realHeight = [];

  for (j = 0; j < myDoc.pages.length; j ++) {}

  realHeight.push (pH);

  }

  Return realHeight;

  }

  I have tryied a few different ways but but always returned [object Page] or higher.

  I'm newbie in scripts, and if someone could help me will be great.

  Thank you

  (let me know if other parts of the code are required)

  Try this (sorry not tested).

  var myDoc = app.activeDocument;

  ...

  function myRealHeight() {}

  var realHeight = [];

  for (j = 0; j< mydoc.pages.length;="" j="">

  page var = myDoc.pages [j];

  var Pbound = page.bounds;

  var pH = Pbound [2] - Pbound [0];

  realHeight.push (pH);

  }

  Return realHeight;

  }