How to print envelopes on the HP OfificeJet Pro 8600,
Hi people there;
Recently I came across many people ask how to print envelopes in the printer even the HP Officejet 8600
Do about it that I decided to provide the two statements in this document as well as the links in the article where I want to talk about the information. That way people who want whether fast and accurate to achieve by reading and following this article and all folk wanting to maybe dig section will provide more in depth information
This is how load envelopes;
I'll give you the link of the Article where this information was collected
http://support.HP.com/us-en/document/c02890475
Here the steps to load envelopes on the Officejet pro 8600.
Grasp the handle at the front of the tray and then pull the tray toward you to open it.
Figure 12: Pull the feeder
Slide the width guides to the paper as much as possible.
NOTE: If you load a larger size paper, pull out the extension of the tray to extend the status bar.
Figure 13: The input tray Extension
Insert envelopes in the center of the tray with the flap of the envelope on the left and upwards. If the valve is on the short end of the envelope, insert the envelope in the center of the tray with the flap towards the product and upwards.
Figure 14: Envelopes of load
Slide the paper width guides are against the edges of the envelope. Make sure the envelope is centered in the status bar.
Push the tray into the product until it snaps.
Figure 15: Push in the tray
Remove the extension on the output tray the tray.
Figure 16: Take out the tray extension
It's the explanation on how to load envelopes into the 8600. Hope is useful
Now check that the use of envelopes are supported by the printer,
This article will provide you also with the support of the envelopes by this printers;
http://support.HP.com/us-en/document/c02858465
Is an important to properly load envelopes for use only envelopes supported by the printer.
you could spend countless hours trying to figure what the problem is without realizing that the issue is the envelope that you use actually is not supported.
Here is a list of envelopes supported by the Officejet 8600
I hope it's to your taste.
RobertoR
▼
Tags: HP Printers
Similar Questions
-
How can I re - position the HP Officejet Pro 8600?
How can I re - position the HP Officejet Pro 8600? The control panel is too high! It seems locked.
Thank you in advance.
Get behind the middle of the bottom of the 'Control Panel' and press release to return the array of command in the "normal" position Please see below;
Please click the White Star of KUDOS to show your appreciation
-
HP ENVY 7640: How to print envelopes
How to print envelopes with HP ENVY 7640 e-all-in-one series?
Hello
Please follow the instructions below:
Kind regards.
-
HP 4520 Envy: How to print envelopes from a desire 4520
How to print an envelope of HP Envy 4520? I did not receive a manual with the printer and the online manual does not envelope printing.
Hey @MayBailey,
Welcome to the Forums of HP Support! I hope you enjoy your stay here.
I understand you are trying to print envelopes from your PC for Windows 8.1 to your craving 4520 e - all - in - one printer. I can help you with that.
This document describes How to print envelopes from your printer.
Please let me know if this allows you to print your envelopes. If not then please let me know what happens when you try to print and what programs you print envelopes to and I should be able to help more.
If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.
If you appreciate my help so please let others know by clicking on the icon below my post thumbs up. -
How to print envelopes with HP Officejet 5741 #10
I have a HP Officejet 5741 on my desk and I send all the time correspondence. I need to know how to print address on envelopes #10 on this printer.
Hey @BlacknGold,
Welcome to the Forums of HP's Support.
I see you have some problems with printing envelopes of 10 Windows PC to your Officejet 5741 e-all-in-one printer. I can help you with that.
This document describes How to print envelopes to your PC.
Please let me know the results after following the above. If you can print your envelopes, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
-
How to print envelopes on my Laserjet 200 M276
How to print envelopes on my Laserjet 200 M276 installed on Windows Vista
The information below is taken from the document "loading paper and envelopes." The document can be accessed here. -
How to print envelopes and labels on an Office Jet Pro 8600 more all-in-one
Envelopes and labels can be printed using the paper on top of the Office Jet Pro 8600 more printer all-in-one?
If printing envelopes the lower tray, should I remove the paper from the tray and adjust the margns?
cor21911,
You are not able to print labels or envelopes of the ADF, for copying or scanning only. Also, it is not necessary to remove the regular printer paper to print on these types of media, even if it can make it a little easier. All you have to do is go to word or any other type of program allows you to print and select the appropriate model label or envelope and follow the instructions.
Let me know if you need additional assistance.
-
How to choose a print with black ink only on the Office Jet Pro 8600?
How to choose a print with black ink only on the Office Jet Pro 8600?
Please read this post then provide some details. What operating system? For Windows 7, the setting must be in the Advanced tab as shown below. Note that color ink may still be necessary to avoid that the print head clogged, see here for more information.
-
How to print pictures on the corner of the page rather than the Center on photoshop elements 8?
sofiat75502936 wrote:
How to print pictures on the corner of the page rather than the Center on photoshop elements 8?
Go to file > new > empty file. Enter the dimensions of your paper stock
Go to file > place, point on the image, and then position it on the corner.
-
How to print photos when the display screen is white? The image is missing in it.
How to print photos when the display screen is blank? It shows only a white screen empty when I select the photo and press on print.
You click on a film image in the print module? And, I guess you don't have to go to the Print module, right? Additionally, make sure that you have chosen to make a custom package. If you chose the custom package you need to drag and drop images and organize them.
-
Problems printing envelopes on an HP Officejet Pro 8500 Wireless
I had this printer for over a year and have lived in frustration with how primitive and really dysfunctional, it is trying to print envelopes. The placement to the right or left of a flap to number 10 envelope gets misaligned, as it is pulled through, for printing and a lot of jams times and tears. Position Central is the only position that will work, but not without fault as the envelope as bad as she came through. It often takes two or three tries before I can get an envelope evenly or directly printed. I'm puzzled as to how HP would engineer a product intended for small businesses with such dysfunctional envelope printing system. Otherwise I am not dissatisfied with the product for almost all other uses. It has many other features very well this work. But not print envelope.
I thought that I would try to inquire as to if an update of the software download may have tried to correct this problem. Am I alone in this?
You have moved the paper guides to properly align the envelopes? I don't see how the envelopes can be loaded in any position, but the Center with the guides snug paper game. See page 42 (46) in the Manual here. Also, if you have the latter paper tray note envelopes are not supported in it, you must use the upper plateau.
-
How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?
How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6? I'm running on Windows 7 64 bit.
It's strange. Looks like you have a second paper tray and put it to the default tray. The second paper tray only supports the types of paper that show on your list. It's strange because unless you have purchased a second tray paper, plus model has one. Does only the high-end model. Other than that, only certain types of media can be duplex, so if you have double-sided printing, it can limit the selection. I'll watch what else could be the cause and get back to you.
-
The HP OfficeJet Pro 8600 does support e-print? I am running Win 7 Pro 64-bit
Can you please tell me: the HP OfficeJet Pro 8600 does support e-print? I can't find or generate or figure out how to create an e-mail address for this printer. Thank you.
Hello BoPeepLamb,
8600 printer OfficeJet does support ePrint. You can access the e-mail address of printers by allowing Web Services to the main display on the printer. The icon is located on the top left corner of the screen and looks like the sheet of paper with circles behind it. Before you can enable Web Services, you must ensure that you have a valid internet connection first.
Once you have enabled Web Services, you should have a print sheet mobile printing with a printer code and the link to http://www.eprintcenter.com where you can create an account and customize your e-mail address printers.
If you have any other questions do not hesitate to reply to this message and I'll try to find an answer for you.
-
How to scan documents with my hp officejet pro 8600
could someone tell me please how to scan documents with my hp officejet pro 8600? Thank you.
I understand that you want to analyze. I'd take a glance at this document.
Let me know if it helps. -
Terminology used in the instructions I'm not familiar with.
Hi @chazz85,
I'd be more than happy to help you with your configuration envelopes and printing of fax.
Are there specific terminology that you want me to explain?
Let's start with the implementation of the fax machine.
The best market-well because it is in this document to set up a new Fax.
For me to simplify this configuration for you, I would need to learn more about the installation of your home Tel/fax line.
- Is he a dedicated phone line? Only used for faxing.
- Or is it a shared phone line? Phone and Fax.
- Is your analog phone provider (typical telephone lines) or digital? (Cable connection)
If the row is shared;
- You have the distinctive ring service? 2 numbers, same phone line that present different ringtone profiles to indicate the type of incoming call
- You have an answering machine? An answering voice calls in the same phone number you use for fax calls.
- You have voicemail? A subscription to voicemail service using the same phone number as the fax.
The (Simplified) recommended configuration would be;
- Telephone jack in the wall (RJ11) connected to line 1 on the printer using the cable provided in the box with the printer
Then, if any;
- Port 2 - EXT on the back of the printer connected to the answering machine (using a phone cable)
- Your phone will then connect on the answering machine (once again using any phone cable)
Once I have more information about your setup I can help you further.
Now for printing the envelope.
I recommend the user to the 8610 Guide to show you how to correctly load an envelope. I copied the steps here for you;
NOTE: If your printer has a second tray (tray 2), do not insert the envelopes for printing in this slot.
1. remove the main input tray. Remove all existing paper from the tray.
2. Insert the envelopes facing print down and charge according to the chart. Make sure that the stack of envelopes does not exceed the lower line of the marking in the status bar. For more information, see the diagram engraved in the status bar.
NOTE: Do not load envelopes while the printer prints.
3. slide the paper width guides in the tray until they touch the edge of the stack of envelopes, then re-insert the tray.
4. remove the output tray extension until the planned paper size is reached.
I need to know what program you are trying to print from. If it's Microsoft Word, I find this document print an envelope very useful.
If it's another program, you can try the manual suggests.
1 load the envelopes face to print down in the status bar.
2. in the menu file in your software, click print.
3. make sure that your printer is selected.
4. click on the button that opens the Properties dialog box. Depending on your software application, this button can be called properties, Options, configure the printer, printer, printer or preferences.
5. Select the appropriate options.
- Under the layout tab, select Portrait orientation or landscape .
- On the paper/quality tab, select the paper type appropriate media drop-down list in the area of selection of the status bar, and then select the appropriate, print quality in the quality settings area.
- Click on the Advanced button in the paper/output box, select the size of paper in the paper size drop-down list.
6. click OKand then click print or OK in the print dialog box.
Please let me know if these steps solved your problem, or if there is anything else I can do to help.
I look forward to hear from you!
Thank you
Maybe you are looking for
-
e-mail failure to download the converted from Pages to Word documents
Why attachment documents are converted to Pages in Word do not download?
-
What is so strange about words ' rectangular, orange Firefox button? This is a relatively new feature and you can access several functions by clicking... I got it on my window... now it's gone... What other details can I give?
-
I have tried everything what iwas instructed aet again this update will not start I get error code646
-
How can I fix code 643 - stop updates?
How can I fix code 643 - stop updates?
-
BlackBerry Z10 10.0.10.90 issue
Hello My Z10 warns me almost everyday on the new version: 10.0.10.90. I think the problem is when you remove the additional applications, such as Twitter, Dropbox... Can you confirm?Thank you.