How to purge incorrect DNS names in Apple Remote Desktop Version 3.8 (A 380, 95)

Similar Questions

• A Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved

  I am trying to use remote assistance to help with my brothers computer. We both use XP, but when I try to open remote assistance to view and or even take control of his computer, I get an error message: connection A Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved. Why this might be happening?

  Hello

  It depends on how the computers are connected and their intellectual property regime.

  They are on the same network (e.g., connected to the same router)?

  Through the Internet? Something else?

  http://support.Microsoft.com/kb/300546/en-us

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  You get the error "a Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved" when the requesting computer (the computer 'demand' help) sends its private IP address instead of its public IP address in the request for assistance. The solution is 'easy' for some and difficult for others. I present here for your perusal:

  (1) obtain the public IP address of the requesting computer (by visiting a web page such as http://www.whatismyip.com)
  (2) save the remote assistance request computers
  (3) modify the remote request for Assistance (RcBuddy.MsRcIncident) using a text editor (such as notepad) and replace the private - section of IP address should be something like this:
  RCTICKET = 65538,1,192.168.1.33:3389 «»
  with the public IP address from whatismyip.com or elsewhere - should be something like this:
  RCTICKET = 65538,1,74.125.47.147:3389 «»
  (4) save the file of RcBuddy.MsRcIncident 'new '.
  (5) double click it to connect to the computer needing help
  (6) cross your fingers and hope it works!

  I hope this helps someone else - if it's too much trouble, feel free to use the tools mentioned elsewhere in this thread.

  -Computers Acorp
  www.ACoRP.net

• How to make Flash Player Package to use the Apple Remote Desktop.

  I want to deploy Flsh Player Package using Apple Remote Desktop.

  Could you please please teach me how to make Flash Player 'Package' to deploy Apple Remote Desktop on Mac OS X 10.9.

  Hello

  We provide an installation of Flash Player PKG for managed deployment package.  The package is available for download for visitors (with distribution license) current of the Adobe Flash Player Distribution | Adobe page.  The post you are looking for is the option 'download DMG Installer (for system administrators).

  --

  Maria

• Why is my Apple remote desktop not send software upgrades as it should?

  Apple Remote Desktop Help?

  In apple remote desktop there is command-line unix where I can send the command softwareupdate - install - all, and I do as user root on an administrator account. My problem arises when I send the software update and ARD never Specifies if yes or no updates have been installed successfully, it just says: Update software tool. I know that it is not to install the update either, because when I look at computers I see pending updates. I'm new to the apple support and appreciate any help in this matter. Thank you

  have you tried:

  Send the command as root

  the "softwareupdate d-i - a" command?

  Try issuing the command to one computer at a time. If you issue it to 100 computers. Your network can choke on the bandwidth required to download all the updates to those. Keep in mind that softwareupdate is for upgrades of the OS; It will not install the updates of pages or other app store apps.

  If the command works, you'll probably want to restart the computer. If everything is working properly.

• Apple Remote Desktop tries to connect to some weird areas

  Firefox and osx elcapitan 10.11.4 15E65

  It's so weird that lately my ARD tried to connect to areas randomly I searched on the web. Little Snitch reports she's trying to connect to 'gist.github' and the other day he tried to goto "krampus".  As I said it's strange behavior since it's the kind of thing I entered in google.

  All advice is appreciated.

  I would be a little surprised if Apple Remote Desktop (ARD) have been connecting the specified web sites, you can post what Little Snitch reports as the source and the destination of the connection?  Also please post what version of Apple Remote Desktop (ARD) are you using?   3.8 (A 380, 95) is in course, at last I checked.

  My general recommendation is to remove Little Snitch - this is a great tool, but it also tends to cause problems when network connections are blocked by mistake, and it's certainly excellent fodder for causing paranoia.

  Adware and malware can cause this, but - if you connect to these sites and don't have adware or malware or any sort of anti-virus or anti-malware, or other similar types of tools tools additional loading - I guess it's OS X hides a tile or such.

  Here is a previous related discussion - even if it is not of the ARD.

• HELP "ARD" (Apple Remote Desktop)

  If you use apple remote desktop, you will have to enter the username and password for the computer you are trying to connect to? And can connect to windows computers?

  I'm getting a mac soon and I wanted to know this answer.

  You very probably will not use Apple Remote Desktop and screen sharing.   Cost of Apple Remote Desktop ~ 80 $US on the App Store.   Customer screen sharing and the server are all part of Mac OS X.

  Apple Remote Desktop works with OS X devices.   As does screen sharing.

  Screen sharing requires to authenticate in the target system.

  If you want to access on Microsoft Windows screen sharing systems, acquire a copy of the cord or other similar packaging.

• How can I change the names of Apple for my MBs?

  A few months ago, Apple named my devices MB 1, 2 and 3 for my iPad Pro, Air MB and MB Pro. How can I change these names?

  On MacBooks: Apple menu > System Preferences > sharing > computer name

  On the iPad: settings > general > topic > name

• Apple Remote Desktop (3.8.5) on several network interfaces

  Location:

  Running Office at distance between an iMac and a Mac mini, both running up-to-date El Capitan.  ARD version 3.8.5

  Both computers are on two networks, the WiFi network including the internet connection and is therefore "primary" and a wired machine-to-machine ethernet connection.  WiFi and ethernet are on separate subnets.

  In Didier, ARD 3.8.4, the Remote Desktop on the Mini app would announce (on Hello) as 'Active' wireless and wired interfaces, and from the iMac, I could choose who I want to use.  Usually the cables, connection gigabit ethernet to reduce network activity on WiFi.

  After these two machines 10.11.2 and ARD 3.8.5, update the Mini looks like 'Active' on the WiFi connection and 'offline' on the connection wired and is the remote desktop will not connect via the wire link. (no change with 10.11.3)

  I tried all combinations of options, I could think of to try to force the 3.8.5 on the Mini ARD announced as 'Active' on the wired connection.  Until beginning with no network connection, at all, on each machine, with all remote management and sharing turned off, re-boot both systems and leaving the disabled WiFi connection.  All to nothing does not.

  Paradoxically, file sharing works great!  It's just the Remote Desktop/screen sharing (Yes, I tried also, all possible combinations) will not announce or connect to the wired connection.

  When the two networks are active, sharing on the Mini preferences show the IP address for the primary network (WiFi) as well as the name (Nimitz.local) of the computer.  However, if the WiFi connection is not active there is no IP address displayed and the ".local" does not appear in the name of the computer.  It appears as just "Nimitz" not "Nimitz.local".

  I went through all the / library, folder ~ / Library, looking for whatever it is possibly connected to this issue.  I opened the files, checked the files, replaced the files and deleted the files without result.

  So my question is: how to do Remote Desktop or screen sharing to connect to the wired interface?  I'd rather not try and go back to Yosemite and ARD 3.8.4 if possible.

  Thank you for your patience!

  Kyle

  App for screen sharing, it must use the wired connection if you Set 1) Ethernet on your system of Viewer to be the first interface in system preferences-> network-> gear-> Service order icon set... and 2) to connect to the target by its IP Ethernet address. Remote Desktop is the MAC address of each computer and combines the addresses into a single entity. Most likely, the second computer that shows 'offline' is a file incomplete or dead. I would like to delete it. ARD promotes the address who has worked both previous. In theory, you can turn off WiFi and connect once via Ethernet and it will remain.

• Cannot start more Apple Remote Desktop

  Hi all

  All of a sudden I can't launch ARD 3.8 (A 380, 95) in El Capitan 11.11.4 more.

  Whenever I try to launch it on one of my Mac, I get a warning telling me that he was able to start "because of an unexpected error" (The Remote Desktop software is not installed properly, or the computer may require a restart).

  

  It affects all user accounts (so it's not a corrupt user pref) and reinstall the entire system through the complete installer does not help.

  I can use the screen sharing app good...

  After reading an old thread to similar problem (software Remote desktop administrator could not start) I tried to delete all the preferences and support for files following the instructions on the Apple KB page , but it did not help.

  I also checked the Console, and it reports:

  22/03/16 10:02:46.888 AM Remote Desktop [5905]: OpenConnectionToAgent - cannot connect 2

  22/03/16 10:16:36.035 AM ARDAgent [6057]: libcoreservices: _dirhelper: 400: mkdir: path = / var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/modes [2] = 0700: permission denied

  22/03/16 10:16:36.035 AM ARDAgent [6057]: confstr(3) on _CS_DARWIN_USER_CACHE_DIR returned an error.

  That could indicate a problem with sandboxing, but still, I see WARNING similar to this one with different applications on different computers without consequences (I suspect the sandboxing allows logging quite talkative today). I checked the cache folder, he was referring to and did not notice anything on the spot or missing (comparing to another computer where work ARD).

  If anyone has a suggestion... I would be eternally grateful

  Corentin

  Of note... I had to replace the drive on the Mac recently and I wonder if it could be a kind of incompatibility of recording equipment. Not sure where that would be stored well and correct uninstallation of the application, following the instructions in the kb should have taken care of that.

  Corentin

• How can I put an end to a remote desktop session?

  Original title: "Incoming connections"

  My Vista 32 bit Pro is configured to accept incoming connections.  How to break the connection to the client computer?  For example, if I plugged in to my box from a remote site, returned to the Vista Pro machine and realized I forgot to unplug then on the remote site?

  Hello

  Look at this page under How can I disconnect from a remote desktop session?

  http://Windows.Microsoft.com/en-us/Windows-Vista/changing-remote-desktop-settings

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to open life cam studio for a remote desktop?

  in my holiday home, have windows 7 pro with installed microsoft life cam. This computer is remote access enabled.

  Since my home computer, I can access my house OK computer, but cannot open my cam life.  Get a message "no camera installed.

  How can I access my life cam and the studio for my computer?

  c

  Hi seejoe,
  Take a look at the faq:
  Remote Desktop connection
  B Eddie

• How to delete incorrect user names that have accumulated on gmail? Clear the cache and history do not help.

  Over time, because of me hitting the keys hard, my gmail login has accumulated several misspelled usernames. Every time I have access to gmail, all pop-up. I want to clean first, but I can't get rid of them. I followed your instructions to clear my cache and history, but nothing helped. I followed the instructions, click in the user name and then use the arrow and delete keys - also without success. I'm on a Mac OSX 10.4.11. Thank you!

  See:
  http://KB.mozillazine.org/Deleting_autocomplete_entries
  http://KB.mozillazine.org/Password_Manager

• Question about the use of Apple Remote Desktop on the Internet

  Hi all

  I used ARD for a few months with the local network.

  Recently, my parents (living in a different city) decided to get an iMac. And they would sometimes help me with the software and everything.

  So I set up a VPN connection between their house and mine, using OpenVPN and TunnelBlick for Mac OSX

  Here's how I plan to do works:

  1 / my parents begin the VPN connection from the iMac to my home networks. Using TunnelBlick, they can do it with just 1 click and it works OK

  3.8.5 2 / my laptop (Macbook Pro), ARC running, I try to look for "local area network", but ARD could not pick up my parents iMac.

  I thought that if my parents iMac connects to my home via VPN network, their iMac will be treated as a "local network" computer just like my Macbook Pro and they should be?

  Could you please let me know where I need to check and what should I look for to make it work?

  Thank you very much

  James

  I thought that if my parents iMac connects to my home via VPN network, their iMac will be treated as a "local network" computer just like my Macbook Pro and they should be?

  ... Yes and no.

  Yes, are vresque on the local network and can access resources on your home network. However, by default, and not without a lot of work, auto-discovery protocols (for example, Hello/zeroconf) do not reach over the VPN connection. It is, in part, because they use broadcast traffic, and the VPN does not pass broadcast traffic because it could overwhelm the WAN link.

  Instead, you must know the LAN IP address assigned to the VPN connection (you will find this in the VPN server log), and then enter your ARD to connect to this IP address. Then you'll be ready.

• Apple Remote Desktop client

  Y at - it a current downloadable version of this program, and how do I get it.

  Using the model, the most recent version.

  It is available for download on the App Store