How to put my cd online at all you-tube/fb
a link that I can use my email is that ok.
You can not put CDs online. They are physical objects. Do you mean how to put the files on the cd on these pages? It's a question that you need such as youtube and facebook. Follow the instructions they give you on their Web sites.
Tags: Windows
Similar Questions
-
my name is Thomas, my knees is stuck when I play online videos as you tube so I have to manually close the laptop I format again shortly I thought will correct the problem, but it didn't ' t.after I manually stop it will play video better, but later I turn on it still stuck again.
Hi Thomas,
I'm "segregation" your thread to its own thread to avoid confusion and so you can get answers to your specific questions.
Now, please answer the following questions:A few questions will help us better to solve your problem. Please answer these questions for us:
1. what operating system do you use?
2. what programs you have problems with?
3. is there an error message generated?
4. what type of file you go when this happens?
5 How long this issue is past?
6. is there anything changed/added/deleted before this issue popped up?
It's basically the who, what, when, where and why of troubleshooting.
Eddie B.
-
How to put a common page for all users after loging on?
Hi all
"My dashboard" is now the default page after logon.
I want to put a home page by default for all users. users can see the homepage after loging on.
How to change the default dashboard "My dashboard" to the "Home page" for all users?
Thank you
DanHello
Steps to follow:
Tried to put the default dashboard for all users.
1. creates a session init block
"2 source of data used in select ' / shared/SH Test / _portal / Test1" double
3. This value assigned to the variable of session CHEMINPORTAIL
4. in presentation services > Administration > my account > default dashboard must be set to "default". Then only the dashboard specified in block init will appear otherwise my account will override the init block.
5. save the changes to the RPD.
5 disconnect and reconnect to see if it works well. It works perfectly fine.For more details, please see the document of CSG replication. But this is for all users.
If the customer wishes to have a user/group basis homepage.
1. they should have 2 separate tables.
i. Group_path_tab with 2 columns. Group_id, portal_path
Wise group path portal for all groups
II. user map table group
Group_id, groupname, user_idThe user should be part of a group.
2. then in the writing init bulk sql must be something like this
Select A.portal_path in the Group_path_tab A, User_group_map B
where = B.user_id: USER
and B.Group_id = A.Group_idSO, based on the USER session variable, it will try to identify the group, and then the portal_path.
Finally, set this value to the session CHEMINPORTAIL variable.Ref:
http://total-bi.com/2011/01/OBIEE-11g-change-default-dashboard/
Thank you! -
How to put in place so that all tabs are the same default home page?
When I load Firefox it shows the preferred default home page. But when I add a tab (click on '+'), it displays a blank page.
How can I configure so all pages in tabs that I add will load automatically to the default homepage favorite that is Google?
You can do this by using an add-on such as:
- NewTabURL - https://addons.mozilla.org/firefox/addon/newtaburl
- New tab Homepage - https://addons.mozilla.org/firefox/addon/new-tab-homepage
-
Remember - this is a public forum to not publish any private information such as phone numbers or e-mail!
Ideas:
- Problems with the programs
- Error messages
- Recent changes to your computer
- What did you already tried to solve the problem
If you do not want to receive support in French, you can post your request here
http://social.answers.Microsoft.com/forums/fr-FR/answerswufr/threads
-
How to put pictures in pictures
How to put photos in pictures?
You can use the file > image one place to another in another image. What exactly do you do?
-
Why my E709a all-in-one printer go offline? How can I put it back online?
Why I can't keep my E709a all-in-one online? How can I put it back online?
What router? What encryption? What operating system?
-
I teach online and all my classes have the same user name and password. Now that I clicked "remember me next time", I can connect only in ONE class. How to unlock my login and my password, so that I can use it for all classes. Carol in English
"Remember Me" for the site connections automatically when you return to the Web site is done with a Cookie the site in Firefox.
Try to clear your Cookies for this Web site.
Tools > Options-> life privacy - Cookies = the button show Cookies.
You must use the custom settings for history at the top of this tab to see the View the Cookies button.Enter the domain name in the top search bar and all Cookies for this URL will be displayed. Unless you can figure out which is Cookie to "remember me", you will need to delete them all.
Hold the {Ctrl} key while you click each Cookie in the small window. When this list is all highlighted, click the Cookie delete button at the bottom left.
When you are finished click Close. -
6520 printer Photosmart HP e-all-in-one series, Windows 10, wireless, is suddenly in offline mode, how do I get it online? One minute, I have the impression and the next it is disconnected. I printed both the printer status report and test results of wireless network who say everything is good and passes. I downloaded "HP Print and Scan Doctor" from the HP website. He said: ' comprehensive software product is not installed on this computer. " In order to use all features of your product, you must install the full software solution. To download and install the complete solution, click on the button 'Install software' (recommended)'. The first time I hit install there was a mistake, I was frustrated. Then I saw that I could run again and this time it worked, or so I thought. He only printed a test photo! If after all that that my printer is still shows as "OFFLINE" when I try to print my laptop. In the printers menu, he says he is now "Web-enabled" and gives me his own e-mail address... So after 2 days of verification of Web sites to find answers, now I can not connect my laptop to my wireless printer more? I need to print from anywhere in the world, I need to print from my home to my printer, wireless... UGH! Someone please help me, tell me it's something simple I'm missing just...
Hello
For simplicity, just use the port that works,
HP ePrint lets you print from oveseas to your printer via the email address of the printer.
Hope that helps.
-
Outlook express 6 - How to put all the unread messages in "BOLD"?
How to put all the unread messages in "BOLD" with outlook express 6?
Are you referring to messages unread, displayed in the preview pane?
If a message is unread, it should be in bold by default.
========================================
* Moved to appropriate forum. *
-
How to put all through traffic the easy vpn client VPN server
Hi people
I want to ask you, how to put all of the server the easy vpn client VPN traffic through.
I mean, I have a server vpn at home, and if I connect to the vpn from outside server, to be with an IP address of my home.
There is the configuration up to now. Where is the problem?
ROUTER1 #sh running-config
Building configuration...
Current configuration: 5744 bytes
!
! Last configuration change at 19:51:18 UTC Wed Sep 4 2013 by cska
!
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
ROUTER1 hostname
!
boot-start-marker
usbflash0:CVO boot-BOOT Setup. CFG
boot-end-marker
!
!
!
AAA new-model
!
!
AAA authentication login ciscocp_vpn_xauth_ml_1 local
AAA authorization ciscocp_vpn_group_ml_1 LAN
!
!
!
!
!
AAA - the id of the joint session
!
Service-module wlan-ap 0 autonomous bootimage
Crypto pki token removal timeout default 0
!
Crypto pki trustpoint TP-self-signed-1604488384
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1604488384
revocation checking no
!
!
TP-self-signed-1604488384 crypto pki certificate chain
certificate self-signed 01
3082022B 30820194 02020101 300 D 0609 2A 864886 F70D0101 04050030 A0030201
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 31363034 34383833 6174652D 3834301E 170 3133 30383239 31313539
32395A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 36303434 65642D
38383338 3430819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100CD 57 F1436ED2 8D9E8B99 B6A76D45 FE56716D D99765A9 1722937C F5603F9F
528E27AF 87A24C3D 276FBA1C A5E7C580 CE99748E 39458C 74 862C 2870 16E29F75
7A7930E1 15FA5644 D7ECF257 BF46C470 A3A17AEB 7AB56194 68BFB803 144B7B10
D3722BDD D1FD5E99 8068B77D A1703059 9F0578C7 F7473811 0421490D 627F25C5
4 HAS 250203 010001A 3 53305130 1 130101 FF040530 030101FF 301F0603 0F060355
551 2304 18301680 141B 1326 C111DF7F 9F4ED888 EFE2999A 4C50CDD8 06 12301
03551D0E 04160414 1B1326C1 11DF7F9F 4ED888EF E2999A4C 50CDD812 300 D 0609
2A 864886 04050003 81810096 BD0C2B16 799DB6EE E2C9B7C4 72FEAAAE F70D0101
FF87465C FB7C5248 CFA08E68 522EA08A 4B18BF15 488D D53D9A43 CB400B54 8006
CB21BDFB AA27DA9C C79310B6 BC594A7E D6EDF81D 0DB7D2C1 9EF7251B 19A 75403
211B1E6B 840FE226 48656E9F 67DB4A93 CE75045B A986F0AD 691EE188 7FB86D3F
E43934FA 3D62EC90 8F37590B 618B0C
quit smoking
IP source-route
!
!
!
!
CISCO dhcp IP pool
import all
network 192.168.1.0 255.255.255.0
DNS-server 195.34.133.21 212.186.211.21
default router 192.168.1.1
!
!
IP cef
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
license udi pid CISCO892W-AGN-E-K9 sn FCZ1530C209
!
!
username privilege 15 secret 5 cska $1$ $8j6G 2sMHqIxJX8MQU6vpr75gp1
!
!
!
!
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
Configuration group customer isakmp crypto VPNGR
vpngroup key
DNS 212.186.211.21 195.34.133.21
WINS 8.8.8.8
domain chello.at
pool SDM_POOL_1
ACL 120
netmask 255.255.255.0
ISAKMP crypto ciscocp-ike-profile-1 profile
match of group identity VPNGR
client authentication list ciscocp_vpn_xauth_ml_1
ISAKMP authorization list ciscocp_vpn_group_ml_1
client configuration address respond
virtual-model 1
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
Profile of crypto ipsec CiscoCP_Profile1
security association idle time 86400 value
game of transformation-ESP-3DES-SHA
set of isakmp - profile ciscocp-ike-profile-1
!
!
Bridge IRB
!
!
!
!
interface Loopback0
192.168.4.1 IP address 255.255.255.0
IP nat inside
IP virtual-reassembly in
!
interface BRI0
no ip address
encapsulation hdlc
Shutdown
Multidrop ISDN endpoint
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
!
interface FastEthernet5
!
FastEthernet6 interface
!
interface FastEthernet7
!
interface FastEthernet8
no ip address
Shutdown
automatic duplex
automatic speed
!
type of interface virtual-Template1 tunnel
IP unnumbered Loopback0
ipv4 ipsec tunnel mode
Tunnel CiscoCP_Profile1 ipsec protection profile
!
interface GigabitEthernet0
Description Internet
0023.5a03.b6a5 Mac address
customer_id GigabitEthernet0 dhcp IP address
NAT outside IP
IP virtual-reassembly in
automatic duplex
automatic speed
!
wlan-ap0 interface
description of the Service interface module to manage the embedded AP
192.168.9.2 IP address 255.255.255.0
ARP timeout 0
!
interface GigabitEthernet0 Wlan
Description interface connecting to the AP the switch embedded internal
!
interface Vlan1
no ip address
Bridge-Group 1
Bridge-Group 1 covering-disabled people
!
interface BVI1
IP 192.168.1.1 255.255.255.0
IP nat inside
IP virtual-reassembly in
!
local IP SDM_POOL_1 192.168.4.3 pool 192.168.4.245
IP forward-Protocol ND
!
!
IP http server
local IP http authentication
IP http secure server
overload of IP nat inside source list 110 interface GigabitEthernet0
IP nat inside source static tcp 192.168.1.5 3389 interface GigabitEthernet0 3389
IP nat inside source static udp 192.168.1.5 3389 interface GigabitEthernet0 3389
IP nat inside source static tcp 192.168.1.5 21 interface GigabitEthernet0 21
IP nat inside source static udp 192.168.1.5 21 interface GigabitEthernet0 21
IP nat inside source static tcp 192.168.1.4 3389 interface GigabitEthernet0 3390
IP nat inside source static udp 192.168.1.4 3389 interface GigabitEthernet0 3390
overload of IP nat inside source list 120 interface GigabitEthernet0
IP route 0.0.0.0 0.0.0.0 dhcp
!
exploitation forest esm config
access list 101 ip allow a whole
access-list 110 permit ip 192.168.1.0 0.0.0.255 any
access list 111 permit tcp any any eq 3389
access-list 120 allow ip 192.168.4.0 0.0.0.255 any
!
!
!
!
!
!
!
control plan
!
Bridge Protocol ieee 1
1 channel ip bridge
!
Line con 0
line 2
no activation-character
No exec
preferred no transport
transport of entry all
transport output pad rlogin udptn ssh telnet
line to 0
line vty 0 4
privilege level 15
preferred transport ssh
entry ssh transport
transportation out all
!
Thanks in advance
To do this you must make the following changes:
(1) disable split Tunneling by deleting the ACL of your configuration of the client group.
(2) enable NAT for VPN traffic by adding 'ip nat inside' to your virtual model of the client network to the ACL that controls your PAT.Edit: Theses are the changes to your config (also with a little cleaning):
Configuration group customer isakmp crypto VPNGR
No 120 LCD
!
type of interface virtual-Template1 tunnel
IP nat inside
!
no nat ip inside the source list 120 interface GigabitEthernet0 overload
!
access-list 110 permit ip 192.168.4.0 0.0.0.255 any
no access-list 120 allow ip 192.168.4.0 0.0.0.255 any
Sent by Cisco Support technique iPad App
-
How to put all the pages using the template has to use the template B?
I use Dreamweaver CS4 Web.
I inherited a website which uses Dreamweaver templates. In the site, the previous site administrator used several different models for different sections of the site.
I am trying to redesign the site to use PHP include to reduce the bloating of the site. Therefore, I am trying to edit the template for all pages of the site to the new one that I designed. I have not found a way to do this. I can select the pages individually and change their models, but I have not found a way to make an update of the model of batch processing. Is there a way to do this? If this is not the case, can anyone think of a better way to standardize the site rather than update individual templates?
You would certainly add the editable area of the title. Each page should have a specific page for optimal exposure title SE. Without this editable region, you wouldn't be able to create specific page titles.
-Add the editable area of the title. Now your two models have the same number of editable regions, each with the same name.
Then all you have to do is to close * all * files DW. Then do a search and replace-
FIND-
/Templates/template_A.dwt
REPLACE-
/Templates/template_B.dwt
First, make a backup of the entire site.
Finally, open template_B, make a negligible change and reverse the trend. Save template_B and update the entire site. That should do the trick.
-
I want to put my studio name on all my photos at once
I want to put my studio name on all my photos at once
not alone
I try paste does not work and selecting all at once and then paste
any suggestion or free program online to do that I post a lot of pictures online and want my info on them... its free just for them, but I like my
Info to be there for years to come?
Thank you
PAM
original title: author's name to front
Yes... If you add a copyright (or any text) to the face of your photos...
He will be there in the future because it becomes a part of the photo.The following links might be worth the trip.
I suggest that you make copies of your photos
Try adding the copyright to your original files.You can also archive the original unseen photos because
It's a real task to try to remove the text digital photos.* *.Tutorial: How to add a Copyright stamp to a digital image
http://www.ehow.com/how_2208447_add-copyright-stamp-digital-picture.html(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Shark Photo
http://www.picture-shark.com/watermark_freeware_image_protect_gallery_default.htmAnother option:
ImageWaterMarker
http://www.codingelite.com/tools/Just download, unzip and run the installation of it... No.
Mandatory. If you decide that you can't use it... simply remove it.It will do only one image at a time but once you
have your copyright adjusted as you like it
IT... You can open a new photo and save it very
quickly and the overlay will even be added to the
each successive picture.Tutorial
http://www.codingelite.com/tools/ImageWaterMarker.htmAlso... the following image editors can add text to the face
photos in a batch, but they are more complicated.IrfanView and IrfanView plugins
http://www.download.HR/download-IrfanView.html
(scroll down a bit for the download links)
(Download plugins too)Picasa
http://Picasa.Google.com/FastStone Image Viewer
http://www.FastStone.org/FSViewerDetail.htm -
How can I save Adobe online storage
I bought the option of $20 for online backup with Adobe files (although, curiously, it says that I don't have 2 GB instead of the 20, I bought), but am unable to find any option in the menu of the organizer which allows me, except the backup files to CD, DVD or external hard drive. There is no mention of online storage. Yet they keep advertising that it is available. Where the option in the menus?
Can someone enlighten me as to how to save a file online?
Thank you very much.
David
Yes, you must use Albums to be able to use the online backup feature.
The rational is that we needed a way for you to identify what should be saved and which should not. (As requested by the early detection of user of the backup feature). Rather than create another metaphor organization around backup, we decided to exploit the existing organizational metaphor of the Albums. The other thing happening that here is that sharing is based on the concept of Albums online, and sharing and backup are using the same code to keep your files in sync with your desktop files online.
If you just want to backup everything in your catalog, simply create a new Album entitled everything (or other), he scored for backup and then everything that put you media in it.
Don't forget that your media can be in several Albums, so all in all, does not mean that you can create still more Albums with subsets of your media.
There are actually a number of benefits from the use of the backup/Sync feature integrated in Elements 7 on local options: (apologies for the sales pitch nature of the following)
1: your support is stored off site. With an external drive or a brilliant drive, a fire or a flood destroys everything. Just ask people in Atlanta this week on the value of their backups to an external drive. (Even if for the moment, there are more serious issues to deal with here)
2: by backup on Photoshop.com, you get to use what we call access anywhere. Simply log on to any web browser Photoshop.com account, and you have access to your media catalog.
3: and, better yet, all changes in distance (adding new photos, re-organization, basic edition, etc.) are automatically synchronized to your desktop PC.
And, Yes, big files such as TIFF or RAW will take time to back up. But, we made the process of backup running in the background, so you don't need to think much about it. Just set up and let it run. You even don't need to have the organizer of items running. You can also set it up to only backup/synchronization when idle. This means that if you use your PC, it will not consume Internet bandwidth or processor cycles, but when leave him you alone for a bit, it will give the time in speed during your absence.
-
How to put an impulse on a guitar track?
Hello!
Logic Pro 10.2.2. I remember in earlier versions of the logic, you can simply move WAV file pulse to the designer of the space.
But now it doesn't work at all, so the question is how to put a pulse of WAV ready (ready) on the guitar track?
Thanks before!
You use the context menu in the user interface:
Or you can open the IR utility, drag it there, make some changes (denoising, for example) and create SpaceDesigner setting. Then, it appears in the menu presets.
Best,
DaCaptain
Maybe you are looking for
-
How can I give one of my purchases to someone else as a gift
I buy a sense for a gift, but I accidentally bought for me. I just want to know how can return the album or give it to my sister as a gift for Christmas.
-
unidentified possible Trojan horse
I think that my computer is infected with some sort of Trojan. I bought this MacBook Air in October and it worked perfectly until today. I tried to read a Web site and page could not finish loading and it kept opening other tabs very suspicious. When
-
Original title: Dell Dock Get a message saying: 'the Dell Dock language file, which is necessary for its operation, has failed to load. Please check your Dell Dock installation
-
Windows Vista keeps freezing on me if I leave it alone for 15 minutes or just when ever
Need help my computer keeps freezing on me if I leave it alone for 15 minutes or I'll watch a video in full screen and when I try to close it freezes. So I do not know what to do, system restore or what? On a side note do not know if it related to th
-
How can I call this new C file?
Sub ApplicationUI::clickedButton(){QmlDocument * qml = QmlDocument::create("asset:///homepage.qml").parent(this);NavigationPane * myNavi = root->findChild ("myNavi");If (myNavi == NULL) {}qDebug()< "unable="" find="">return;}Page * new_page = qml->()