Similar Questions

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• Bootcamp error: "the startup disk cannot be partitioned or restored to a single partition" and Windows recovery partitions

  I have Setup with Bootcamp Windows 8 and then upgrade to Windows 8.1, and then upgrade to Windows 10.

  When I want to restart the training camp that I got the error message: "the startup disk cannot be partitioned or restored to a single partition.

  According to this page, it is because of Windows recovery partitions added during the 8 to 8.1 migration and 8.1 to 10.

  I check with diskutil and I found 2 partitions of Windows Recovery:

  diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 419,4 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 79.1 GB disk0s4

  5: Windows Recovery 471.9 MB disk0s5

  6: Windows Recovery 472,9 MB disk0s6

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 419,0 disk1

  Logical volume on disk0s2

  C961E459-1E0D-4060-A467-3B4A705264AA

  Unencrypted

  I tried to delete the Windows Recovery 2 partitions with disk utility tools but the button "-" to remove them were leaving is disabled.

  Is it a good idea to remove these partitions? If yes how?

  1. What is the year/model of your Mac?

  2. you are trying to install a new copy of the W10 or remove the existing installation?

  3. do you have the W8 or installation/upgrade W8.1 had problems before the upgrade of the W10?

• How to restore a corrupted partition

  Hello everyone!

  I have had this problem for a while and posted on the multiple mac forum, but no one ever knew how to fix it.

  Last year, I tried to install windows on my mac, but for some reason, it didn't work and I'm now stuck with a score of 100 GB "Untitled." I'm running out of space and I'd really like to use these 100 GB.

  People told me to run bootcamp and understand but when I run the bootcamp, it says "Startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted in a single volume in Mac OS extended (journaled) or already partitioned by Boot Camp Assistant to install Windows. "I have no idea what it means.

  At that time I kinda dropped on installing windows (although it would be nice), but all I want is to get my back to 100 GB!

  Thanks to anyone who can help!

  Kevin

  Can you post the output of the following commands in OS X Terminal?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Boot Camp error - the startup disk cannot be partitioned or restored to a single partition.

  I use an iMac (retina 5K, 27 inches, end of 2014), the Version of OSX EL Capitan 10.11.1.

  I tried to install windows via bootcamp, but failed. And then, when I'm trying to use Boot Camp Assistant to remove the existing Windows Partition.

  Below will error was triggered.

  The startup disk cannot be partitioned or restored to a single partition.

  The startup disk must be formatted in a single volume in Mac OS extended (journaled) or already partitioned by Boot Camp Assistant to install Windows.

  I want to just delete the Windows Partition and reinstall, can someone help me please

  Here are my details to disc...

  List of $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 121.0 GB disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_CoreStorage Macintosh HD 895.8 GB disk1s2

  3: disk1s3 Apple_Boot Recovery 650,1 MB HD

  4: NO NAME 104.9 MB disk1s4 EFI

  5: NO NAME 104.9 MB disk1s5 EFI

  6: EFI No. 104.9 MB disk1s6 NAME

  7: EFI No. 104.9 MB disk1s7 NAME

  8: disk1s8 NO NAME 104.9 MB EFI

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 1.0 TB disk2

  Logical volume on disk1s2, disk0s2

  6F4F36AE-BEB3-43EA-8390-C5E7F46574B6

  Fusion unencrypted drive

  List of cs $ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 7C72C890-404F-4CE8-AA74-3AAD4B71D773

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 1016788279296 B (1.0 TB)

  Free space: 114688 B (114.7 KB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 895799427072 B (895,8 GB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-> EB5AF0A2-99C5-41DB-B58F-D98B3589AC65 family of Logical Volume

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical Volume 6F4F36AE-BEB3-43EA-8390-C5E7F46574B6

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1010932908032 B (1.0 TB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  $ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 14751/255/63 [236978176 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-236978175]

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  Delete disk1s4-disk1s8 using disk utility, run

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  and try again Deputy BC.

• Storage partitioning - query on multiple partitions performance?

  Hello
  
  We use Oracle 11.2.0.3 and have a central fact table large with several alternative identifiers that have the index bitmap on them and fks looking at the dimension tables + several measures
  
  (PRODUCT_ID,
  CUSTOMER_ID,
  DAY_ID,
  TRANS_TYPE_ID,
  REGION_ID,
  QTY.
  VALUE)
  
  We have 2 separate sets of queries users seek to run for the most part, those accessing transactions products regradless of the time transactions that happened (that is, not financial queries - approximately 70%,)
  queries to determine what happened in a particular week - 20% of the queries.
  
  Table will be about 4 billion lines eventually.
  
  Whereas the addition of additional column to that partition the DATE range and this for us to abandon the old partitions each year - but these data would not be joined to any other table.
  
  Whereas then infra partitioning by hash of the product_id that is the key to override to the product dimension.
  
  Reflections on the performance?
  
  Queries by their nature would have hit several secondary partitions.
  
  Reflections on the performance of the queries of queries that access several sub-sub-sheet music/scores compared to applications running on a single table.
  
  Any other thoughts on partitioning strategy in our situation much apprecaited.
  
  Thank you

  >
  Hash partitioning gives not the size of partition with these predicates to join because they use the equality operator?
  >
  Size of the partition occurs at the stage of the analysis. Oracle analyzes the query used and for partitioned tables, trying to determine which partitions are necessary. If filter predicates include information which indicates that one or more specific partitions the Oracle can "prune" other partitions because they are not necessary.

  So if 'product_id' is partitioned hash then all rows with the same value will be in the same partition. Then a query like

  SELECT * FROM myTable
  WHERE PRODUCT_ID = 7
  

  Oracle will know when the query is analyzed which sharing one and one only, is necessary because the value 7 always hash to the same partition and Oracle can chop the literal "7" at the time of the analysis to determine which partition is necessary; so cut the other partitions.

  If product_id is used in a join predicate to another table but is not limited to specific values like the example above then Oracle cannot determine at the time exactly what partitions might be necessary because it will depend on the discovery at the time of actual data values.

  The information needed to trim must be available at the stage of the analysis. In other words, the query and the metadata for the table (DDL, statistics, etc.) will be used to make decisions of pruning - the actual table data are not a factor because the data are not available at the time of the analysis.

• Boot Camp - boot disk cannot be partitioned or restored to a single partition

  Hello

  Would really appreciate some help on this!

  I tried to install Windows 7 on my iMac 2015 but during the installation of windows it guests that the partition must be formatted in a different way.

  Now when I try to use Boot Camp once again, I get this message:

  The startup disk cannot be partitioned or restored to a single partition.

  The startup disk must be formatted in a single volume in Mac OS extended (journaled) or already partitioned by Boot Camp Assistant to install Windows.

  The problem is that I can't erase the Boot Camp Partition in any way using disk utility.

  If it's any help - it is the diskutil list:

  haraldsiMac: ~ the haralddegraaf list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * TB 2.0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage fusion 1.7 to disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS bootcamp 252.8 GB disk0s6

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_CoreStorage fusion 121.0 GB disk1s2

  3: disk1s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS TB Fusion + 1.7 disk2

  Logical volume on disk1s2, disk0s2

  0D7254CA-C937-4A69-A2AA-AC689844B16F

  Fusion unencrypted drive

  / dev/disk3 (disk image):

  #: NAME SIZE TYPE IDENTIFIER

  0: boot Camp + 1,2 GB disk3

  haraldsiMac: ~ haralddegraaf$

  haraldsiMac: ~ haralddegraaf$ sudo TPG - r show/dev/disk0

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 3394638832 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  3395048472 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  3396318008 16782536

  3413100544 493666440 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  262151 3906766984

  3907029135 32 table dry GPT

  3907029167 1 dry GPT header

  haraldsiMac: ~ haralddegraaf$

  The Macs listed to install Windows 7 and previous versions on your Mac with Boot Camp - Apple supported support W7. 2015 macs don't support W7.

  The only supported method to remove Windows from a Fusion using Mac drive is Boot Camp: Remove Windows from your Mac . Do not use disk utility.

  You seem to have tried a deletion of THE (not deleting a partition), at least once. Your BC partition is now a HFS partition. Convert it back into a FAT32 partition on THE and then try to remove it by using the link provided.

  If you are unable to remove using BCA, then use the steps of the Re: doesn't have windows via bootcamp 8.1 installation .

• Unable to overcome error - "the startup disk cannot be partitioned or restored to a single partition.

  Hello!

  I'm trying to install Windows on my iMac (late 2013, running 10.11.6) without success.  I created the ISO to a flash drive, but when I try to use the Assistant Boot camp, I am referred to the following screen:

  

  I did my best to study solutions. The cause, by apple support discussions, is that there is another partition of pre-empting (stop) the wizard boot camp partitioning the hard drive.  I studied the partitions on my HDD after unplugging all devices and found this:

  

  This shows the main partition: Macintosh HD, the bootcamp partition: BOOTCAMP; and 2 unknown partitions: "Apple HDD ST100DM003 Media" and the same * M004.  I was able to delete the first Apple ST100DM003 HARD disk partition and ran first aid on the fusion drive after that the second he would not remove.  Also, I can't delete the boot camp partition.  I keep getting the same message when I try to install windows on a partition of the fuser unit using Boot Camp Assistant - "Startup disk cannot be partitioned or restored to a single partition".

  Any suggestions?

  Please after the release of the following OSX Terminal commands.

  diskutil list

  Cs diskutil list

  A reader of merger should have underlying EFI, OSX, Recovery HD on each of the physical disks. If your previous Windows installation attempts have failed, the disks can leave in a State where BCA use/will not change them.

• Uninstall the bootcamp partition: the startup disk cannot be partitioned or restored to a single partition.

  A few months ago, I created a Windows 8 bootcamp partition, and then, I updated for Windows 10 without any problem. But I no longer need and I would attribute this space to OS X. The problem is when I try to remove it from the app of Bootcamp, I get this message: "the startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted in a single volume in Mac OS extended (journaled) or already partitioned by Boot Camp Assistant to install Windows. »

  It comes to the current state of the hard drive:

  

  You have an idea? Thanks for the help.

  I finally solved it. It seems that I had a not mounted partition which it has not been used. I removed it and it solved all the problems:

• How to remove the USB partition?

  I have a 8 GB drive that I use for my photo frame digital flash. I deleted all the photos and reloaded the latest and once I put the USB in the photos only old framework that I thought I had deleted appears.

  I then discovered that the USB has a partition that contained the older photos. I deleted these but the USB will only display photos in the only sector that has very little space. How do I delete the partition or have the photo frame to recognize the other much larger partition?

  Please help if you can.

  Ugly

  It is easy enough to remove it. Right click on the USB key and choose Format. Everything will be formatted :)

• p028tx: my laptop came with 8.1, how to create the recovery partition in windows 10

  My laptop came with windows 8.1 innitialy.

  I had updated my operating system Windows 10.

  Few days back I had to 'restore factory settings' on my pc due to some problems and my pc with windows 8.1 restarted.

  So, how can I creat recovery partition which would recover my pc back to windows 10 with out going back to windows 8.1.

  Please help me as soon as POSSIBLE.

  Thank you for visiting the Forums HP's Support and welcome.
  You can find the frequently asked Questions for Windows upgrade 10

  http://WWW8.HP.com/in/en/Ad/Windows-10/learn-more.html#! & pd1 = 1 & = 1 pd3 pd4 = 1 & pd5 = 1

  Best regards;
  Marcel
  I am an employee of HP
  Please click the White Star Kudos to say thank you for helping.
  Please check accept as Solution if my help has solved your problem.

• How can I delete a partition on a Mac Mini (end of 2012)

  Hello

  I would like to know how I could erase a partition I did by mistake. My Mac is very low in memory and, of course, I as soon as I open some applications Mac starts to bug... I just did an installation fee and it's still going slowly...

  When I try to do it with disk utility, it is impossible. I have a screen shot so that you could understand my problem more...

  

  OS X is installed on Macintosh HD, it is the general principle.

  I use a Mac Mini Server (end 2012) - processor: 2.3 GHz Intel Core i7 - memory 4 GB with OS X El Capitan

  In advance, thank's a lot

  MIKE

  How do yo start to access disk utility?

  You can not erase/format the partition that you started from.

  I can't tell if you're trying to do.

  Try to start Recovery

• Can I restore a single partition using the Toshiba Recovery disk?

  I need to know if I can restore just the windows on my partition main because I don t want to format all my HARD drive.
  In my second partition I have backed up all my files and I don t want to erase.
  Please can someone tell if I can do this?

  If you have a Toshiba Vista recovery DVD then the whole HARD drive will be formatted and it s not possible to restore the operating system on a single partition.
  Therefore, you should always backup before using this disc

• Equium won't start - how to access the recovery partition?

  Hi, my sister has a 2008 Equium A200-1V0 with Vista 32-bit, that no longer starts (probably due to damage of rootkit virus). It loads the BIOS but then goes to black screen with blinking cursor.

  F8 does not work.
  F2 goes to Phoenix TrustedCore Setup utility. The Toshiba hard drive and a CD-ROM drive are listed in hand and start in the right order.

  Using F12 I can get it to boot from a Win7 64 bit repair disc that I burned using my laptop.

  However, it does not recognize the operating system or any image or restore points (because it is 64-bit) but he will be responsible for command prompt.

  To * guest *, I can launch Notepad and when I click on file / open and double click on computer it shows 4 Hard drives as follows:
  Local disc (c :))
  Data (d :)) 42 GB free of 54.5 GB
  WinRE (e :)) 1.11 GB free of 1.46 GB)
  Boot (x :)) 29.0 MB of free space of 31.5 MB (which is used by the repair disk)

  So the C: drive is listed, but without ability.

  * CHKDSK *.
  CHKDSK c: /r and press return

  «The type of the file system is NTFS.»
  Unable to determine the status and version of the volume. CHKDSK is abandoned.
  Cannot transfer messages saved in the journal of the events with the 50 State.

  * Run TESTDISK *.

  Analysis:
  Size of the partition start end in sectors
  1 P Windows RE (store) 0 32 33 191 89 26 3072000
  2 * HPFS - NTFS 191 89 27 7477 118 1 117051392
  3 P HPFS - NTFS 7477 118 2 14592 190 62 114307072 (data)

  * = Primary bootable
  When you perform a quick search, then P - list of files, the second partition it reports:
  "Cannot open the file system. Filesystem seems damaged. »

  So what I want to do is boot to Windows restore to drive E.

  My question is for Toshiba experts: If F8 does not work how to use the recovery partition?

  Laptop is:
  Part number: PSAF5E-002005KS
  Main features
  -Intel® Pentium® Dual-Core Processor T2310
  -Genuine Windows Vista® Home Premium Edition
  -Drive DVD Super Multi (Double Layer)
  -2 048 (1 024 + 1 024) MB of RAM (667 MHz)
  -15.4 "WXGA TFT display 1 280 x 800

  > THIS ISN'T MICROSOFT, TOSHIBA, AND GOOD PRODUCT DESIGN.
  I really put t know that should do better than to place the Microsoft sticker at the bottom.
  This product key and sticker on it's just proof that you purchased the machine with an operating system preinstalled and legal active OS version. This key belongs to original OS (recovery image) that you got with your laptop and it is not a kind of universal key that you can use for the activation of the operating system if you have made the decision to install the clean version of the OS.

  In General, this key is totally useless. While your computer you've got legal copy and this version, that you can install so often desired. It must not be enabled.
  > So my question still remains: can I recover my Toshiba laptop using this restore partition?
  If you want to recover using the Toshiba recovery image response is not. Cannot start HARD drive recovery facility.
  > Even with a dvd of Windows Vista is genuine, I can't reload the OS
  In my opinion you need make the clean OS installation using the clean installation or order original Toshiba Recovery disk on https://backupmedia.toshiba.eu/landing.aspx disc and install original (already active) recovery image.

• Re: Satellite Pro L450D - 12 X - how to access the recovery partition?

  Hello

  I've formatted Windows 7 with a Windows XP CD but did not setup. I wanted to know how to access the recovery partition to set it by default, everything exists on the laptop right now is Ubuntu, but I don't know, I saw an additional partition that must contain recovery files as laptop did not come with a recovery disk and unfortunately did not create a filter.

  How can I access the recovery partition on the laptop having in mind, I formatted the drive Windows 7 was installed on or should I activate or something like that?

  Any help much appreciated

  Hey,.

  On the second partition of your laptop (data partition), you will find a folder named HDDrecovery and it contains recovery files. The problem is that you can use the HARD drive only with the pre-installed operating system recovery feature. It would mean in your case it s too late now and it s not in use anymore.

  You have created the Toshiba recovery disc as mentioned in the user manual? If Yes, you can use this disk to restore to factory settings. Just boot from this CD and follow the instructions on the screen.

  If you don t have the recovery disc, you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx