How to quit the nested loop

I have a nested loop

loop1 start
...
loop2 start
...
end loop2
...
end loop1

I want to know how can I come out the two loops of the inner loop.

Hello
Out of the inner loop in the use of nested loops labels

SQL> BEGIN
  2          <>
  3            FOR i IN 1..2 LOOP
  4                 <>
  5                 FOR j IN 1..4 LOOP
  6                      DBMS_OUTPUT.PUT_LINE('I am in Inner Loop');
  7                 END LOOP inner;
  8       DBMS_OUTPUT.PUT_LINE('I am in outer Loop');
  9            END LOOP outer;
 10   END;
 11   /
I am in Inner Loop
I am in Inner Loop
I am in Inner Loop
I am in Inner Loop
I am in outer Loop
I am in Inner Loop
I am in Inner Loop
I am in Inner Loop
I am in Inner Loop
I am in outer Loop

PL/SQL procedure successfully completed.

SQL> BEGIN
  2          <>
  3            FOR i IN 1..2 LOOP
  4                 <>
  5                 FOR j IN 1..4 LOOP
  6                      DBMS_OUTPUT.PUT_LINE('I am in Inner Loop');
  7       exit inner;
  8                 END LOOP inner;
  9       DBMS_OUTPUT.PUT_LINE('I am in outer Loop');
 10            END LOOP outer;
 11   END;
 12   /
I am in Inner Loop
I am in outer Loop
I am in Inner Loop
I am in outer Loop

PL/SQL procedure successfully completed.

SQL>
SQL> BEGIN
  2          <>
  3            FOR i IN 1..2 LOOP
  4                 <>
  5                 FOR j IN 1..4 LOOP
  6                      DBMS_OUTPUT.PUT_LINE('I am in Inner Loop');
  7       exit outer;
  8                 END LOOP inner;
  9       DBMS_OUTPUT.PUT_LINE('I am in outer Loop');
 10            END LOOP outer;
 11   END;
 12   /
I am in Inner Loop

PL/SQL procedure successfully completed.

Twinkle

Tags: Database

Similar Questions

  • Need help for the conversion of the nested loops to use the stream

    I'm trying to teach me how to effectively use the java stream, but finds it difficult to find the correct syntax for a problem of nested loop. I would like to convert the following code to use the Java 8 stream instead of nested loops.  Can anyone provide an example or a solution?

     /**
         * Return all members of stringListOne that begin with any of the strings in
         * stringListTwo
         *
         * @return all members of stringListOne that begin with any of the strings in
         * stringListTwo
         */
        Set<String> getFilteredStrings(Set<String> stringListOne, Set<String> stringListTwo) {
         
          Set<String> stringListOneFiltered = new HashSet<String>();
          for (String next : stringListOne) {
                for (String nextPrefix : stringListTwo) {
                    if (next.startsWith(nextPrefix)) {
                        stringListOneFiltered.add(next);
                    }
                }
            }
            return stringListOneFiltered;
        }
    

    Here's a test case for the above code:

    /**
         * Test method for {@link scratchpad.MyClass#getFilteredStrings(java.util.Set, java.util.Set)}.
         */
        @Test
        public final void testGetFilteredStrings() {
    
            MyClass uut = new MyClass();
            
            Set<String> stringListOne = new HashSet<String>();
            stringListOne.add("until");
            stringListOne.add("unite");
            stringListOne.add("under");
            stringListOne.add("prepare");
            stringListOne.add("pretend");
            stringListOne.add("prefix");
            stringListOne.add("prepend");
            stringListOne.add("post");
            stringListOne.add("positive");
            stringListOne.add("postgame");
            stringListOne.add("postpone");       
            
            Set<String> stringListTwo = new HashSet<String>();
            stringListTwo.add("post");
            stringListTwo.add("pre");
            stringListTwo.add("und");
            
            
            Set<String> result= uut.getFilteredStrings(stringListOne, stringListTwo);
            
            System.out.println(result);
            assertEquals(8, result.size());
        }
    

    Thanks for any help you can provide!  I get the hang of using the course of water, but this particular code was difficult.

    tmbc

    I found the following solution to my question:

    GetFilteredStrings (Set stringListOne, the value

    {Set stringListTwo)

    Predicate startsWith = p-> stringListTwo.stream () .anyMatch (prefix-> p.startsWith (prefix));

    Return stringListOne.stream () .filter (startsWith) .collect (Collectors.toSet ());

    }

  • How to call the nested in the SQL table collection

    Please see the example below, how to attach the collection vmi_emp with history_emp table

    CREATE or REPLACE type vmi_emp as an object

    (empno varchar2 (500),)

    Ename varchar2 (500),

    HireDate date,

    SAL number (20));

    CREATE or REPLACE type nested_emp is table of the vmi_emp;

    declare

    v_type nested_emp;

    Start

    Select vmi_emp (empno, ename, hiredate, sal)

    bulk collect into v_type from emp;

    ???????????????? Select * from history_emp a, b vmi_emp where a.empno = b.empno

    end loop;

    end;

    Select * from history_emp has, b table (v_type) where a.empno = b.empno

  • How to stop the timeline loop (where the loop is not activated)

    Hello

    How to stop the chronology of looping/jump at the beginning of the timeline automatically when the playhead reaches the end of the edition / the end of the timeline please? The loopback feature is disabled. Its really frustrating when you look at the video game back, and when it reaches the end, he always goes early in the Cup again. Any help would be greatly appreciated. Thanks Tatjana

    Thank you! I fixed it. Its automatic scrolling of the playback head.

  • How to stop the While loop in the Structure of the event with the same button?

    Hello

    I have a problem. I want to use a single control to activate an event in a structure of the event and the same control to end a while loop in this case.

    It is possible to use 2 controls to do this, but I need to be alone.

    Thank you

    You should NEVER place while loops inside the case of the event, and it is never necessary to do. Think about it: all you have to do is spin the code. You can easily use the outside while loop for everything. Simply place the code of the loop internal (without the inner loop) inside the case of delay and manipulate the time-out period between a pending finished and the infinite (-1), depending on the State of the Boolean value.

    A very simple example (LV 8.0)

  • How to eliminate the audio loop "police Siren" in firefox?

    I picked up an audio loop "police Siren" when I went to youtube.com , which is now integrated into Firefox and comes every time I open the browser

    This has happened

    Each time Firefox opened

    == I went to YouTube MCN UK

    do not have google open in a tab!
    (if you are the one who opens the FF and it opens google can immediately open another tab to access a site then just visit the page that open without having to open a new tab)

    OR

    If you have seen cool so that disable

    (the sound is for the celebration of the 30th anniversary of pacman and you can play the game on the home page of googles)

  • GARAGEBAND 10 - HOW TO REMOVE THE USER LOOPS

    Hello, I imported some user loops in Garageband in mp3 format and everything works fine.

    But some of them are doubled and I want to delete.

    I checked the MACINTOSH HD > LIBRARY > AUDIO > loops APPLE LOOPS > APPLE way where they should be stored, but I can't find them anywhere.

    Can someone help me?

    Thank you

    Loops can also be in your user library - in the folder of yor House / library.

    Check is this folder:

    MACINTOSH HD > LIBRARY > AUDIO > loops APPLE LOOPS > user loops

    or

    Your home folder > LIBRARY > AUDIO > loops APPLE LOOPS > user loops

    Your user library can still be hidden. To reveal the hidden user library:

    • Bring the Finder to the front by clicking on the desktop or the Finder icon in the Dock.
    • Select your folder user/home (with the House icon in the side bar of the Finder)
    • With this window in the Finder in the front window, press the ⌘J key combination to bring up the display options.
    • In the view options panel allow you to "show the library folder. That will make your visible user library folder in your folder.
    • Open your file, then the library folder, then Audio.
  • How to quit the black screen safe mode

    The other computer is panic

    Restarting it brings me to the options screen

    Each option is a black screen with 'safe mode' all over

    There is no button on the start menu, nothing at all, the button operation tone and its odious

    Help please!

    Hello

    what buttons "beep"?

    sound signals are normally a sign of hardware problems

    Here are links to "beep" error codes

    http://www.pchell.com/hardware/beepcodes.shtml

    http://www.computerhope.com/beep.htm

    If the above does NOT apply

    and if you don't have a dvd of vista microsoft brand a startup repair disk

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

  • How to get the button loop on my calendar?

    HII im using adobe flash cs5 nd my loop button is missing frm my calendar... can someone help me get this timeline button?

    you see the bottom of the timeline (highlighted in yellow)?

  • PC laptop Pavilion 15: how to fix the boot loop laptop HP Pavilion 15 (Winows 7, 8.1, 10)?

    Hello

    A month ago I restared my laptop and it got stuck on a Windows loading screen (Windows 10). I thought it was windows problem and then reinstalled Windows 7. But after 1 day later, I face the same problem on windows 7. Then I changed from Windows to ubuntu, but the same problem. Today I went to a repair shop & technician said it's hard drive problem (but hard drive test result was good, no errors). Then he changed the disk HARD but same problem. He tried to install windows, but not of sone. Stuck on the loading screen.

    Please help me

    A faulty memory stick could also cause this. Did you test memory? If you can deal with a bad sata controller on the motherboard.

  • How to get the items on a loop at the same time during the execution of the loop for

    Hello

    I am a student. I would like to know how to get the outside loop counter values For in parallel so that the loop runs rather than obtaining the value finally outside the loop for future prospects for the answers.

    Thank you

    Frederick

    You already said yes, and you have said some of the different ways (registrants, locals, reference, queue, etc.). Since the information was provided to your request, the thread can be considered closed? If you want details about how to implement something, you must provide the details on what you are doing.

  • Nested loops

    Hello

    A fundamental question about Nested Loops, what is the number of rows in the inner table means (4 in this example)? This is the average number of lines that oracle had to read by loop?

    Thank you.
    SYS> SHOW PARAMETER optimizer_features_enable
    
    NAME                                 TYPE        VALUE
    ------------------------------------ ----------- ------------------------------
    optimizer_features_enable            string      11.2.0.1
    
    HR> EXEC DBMS_STATS.GATHER_TABLE_STATS (USER , 'EMPLOYEES' , CASCADE => TRUE )
    
    PL/SQL procedure successfully completed.
    
    HR> EXEC DBMS_STATS.GATHER_TABLE_STATS (USER , 'DEPARTMENTS' , CASCADE => TRUE )
    
    PL/SQL procedure successfully completed.
    
    HR> SELECT COUNT(*) FROM employees ;
    
      COUNT(*)
    ----------
           107
    
    HR> SELECT COUNT(*) FROM departments ;
    
      COUNT(*)
    ----------
            27
    
    SELECT /*+ USE_NL(e d) */ e.last_name , d.department_name
     FROM employees e , departments d
     WHERE e.department_id = d.department_id;
    
    Execution Plan
    ----------------------------------------------------------
    Plan hash value: 2968905875
    
    ------------------------------------------------------------------
    | Id  | Operation          | Name        | Rows  | Bytes | Cost  |
    ------------------------------------------------------------------
    |   0 | SELECT STATEMENT   |             |   106 |  2862 |    24 |
    |   1 |  NESTED LOOPS      |             |   106 |  2862 |    24 |
    |   2 |   TABLE ACCESS FULL| DEPARTMENTS |    27 |   432 |     2 |
    |*  3 |   TABLE ACCESS FULL| EMPLOYEES   |     *4* |    44 |     1 |
    ------------------------------------------------------------------

    Hello

    A fundamental question about Nested Loops, what is the number of rows in the inner table means (4 in this example)? This is the average number of lines that oracle had to read by loop?

    Hello

    in fact, it's exactly what it is, with the exception of is not the true Oracle number was read, it is an estimate.

    You can track 10053 and see how the optimizer reach these numbers. The optimizer calculates the cardinality of the join using the following formula:

    cardinality (employees) * *(join selectivity) cardinality (departments).

    and join selectivity is essentially 1/greater (num_distinct (departments.department_id), (departments.department_id) num_distinct), adjusted for null values (not NULL values in this particular case, so no adjustment is necessary).

    If you plug the values you get for the cardinality of the join:

    107 * 27 * join selectivity, which join selectivity = 1/greater(11, 27) = 1/27 = 0.036691, so 107 * 27 * 0.036 ~ = 106.

    4 comes from this number by dividing the cardinality expected join (106) by the estimated number of iterations of the nested loop (27).

    It is not true the optimizer assumes an even distribution here - if it did, then it should get to 11 employees by Department, not 4 (because num_distinct (employees.department_id) = 11, not 4).

    If you are interested in these issues, please refer to the excellent book by Jonathan Lewis "Cost based fundamentals", is all explained quite well in there.

    Best regards
    Nikolai

  • Save several bays of nested loops

    Hello

    My vi generates several bays in each iteration of the loop, and I would like to save the data. I did work with the files before recording, but it's never with nested loops. I don't know how to keep the information of the iteration of one loop at the other. I would like suggestions. I made this sample & simple vi (attached file) that simulates the question I have. I have a file with a time column and different columns of food beside him.

    The first question I have is that I generate the time table only once, but a table of signal several times, so how can I keep the time table to drop several times? The other question, as stated above, saves the data in the table signal getting lost in the nested loops...

    Thank you

    A

    1. the first element of the first matrix signal IS always zero.  The Signal to simulate always starts at zero.  You compare it to the indicator of "first date".  Who got by converting the dynamic data type to a scalar.  And it's always the last element of the actual data.  And since the "first out" is replaced with each iteration of the inner loop, the number you see at the end is actually the latest iteration of the data.  Look at "First release" in comparison with the last element of your last column of the table and you will see they are the same.

    2. the reason why you have a first column that consists of the steps is because that's what you have wired to initialize the shift register.  If you look at my example, you will see that I have an empty array.  (The zero is gray.)  You, the 0 is not dimmed meaning there is an element.  Expand this table to view more items and expand the digital field and you will see more digits.  They correspond to what is in your first column.

  • The truth about the IMBRIQUEE LOOP

    Hi Experts,

    Yesterday, I looking for the differences between IN and there ARE operators. I googled and I read a thread in the site of Tom Kyte (http://asktom.oracle.com/pls/asktom/f?p=100:11:P11_QUESTION_ID:953229842074). In short, Tom wrote that the use of these two operators are different. They are also treated differently by the optimizer. IN operator works more like join two tables (hased, sorting, etc.) On the other hand, works longer EXIST as LOOP IMBRIQUEE. In other words, the inner loop runs once for each row in the outer loop. He also suggested that if the sub query is very large and high query in small. And let's say that the index of use of subquery, operator EXIST becomes much more appropriate. However, if the subquery is small FOR operator to become effective.

    In addition, Jonathan Lewis also mentions the nested loops in his book (based on Oracle Fundemantals costs) with a chapter. He says the following.

    "The execution plan of a join on the inner table index nested loops can have two different forms of 9i from: a when the optimizer uses the index on the inner table for a single scan and another when the optimizer uses the index for a range scan." The second form ceases to be an option, however, if the external table is guaranteed to return a single line. »

    My question is, if you look at the loop nested within query plans. It always works as a line returns unique index for Each row of the outer query as follows. I mean that you can come through a loop nested between two tables with FULL TABLE SCAN (usually used for this hash join). The optimizer work like this? If the join condition contains indexes between two tables and one of them is quite huge according to the other. Then the optimizer always uses NESTED LOOP rather than other join methods?

    If the above is correct, can we write the following formula?

    NESTED LOOP = QUERY EXTERNAL (a low num lines FTS) & SUB QUERY (a high number of lines with INDEX)

    ----------------------------------------------------------------------------------------

    | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |

    ----------------------------------------------------------------------------------------

    |   0 | SELECT STATEMENT |         |     1.    58.     4 (0) | 00:00:01 |

    |   1.  NESTED LOOPS |         |       |       |            |          |

    |   2.   NESTED LOOPS |         |     1.    58.     4 (0) | 00:00:01 |

    |*  3 |    TABLE ACCESS FULL | EMP |     1.    38.     3 (0) | 00:00:01 |

    |*  4 |    INDEX UNIQUE SCAN | PK_DEPT |     1.       |     0 (0) | 00:00:01 |

    |   5.   TABLE ACCESS BY INDEX ROWID| DEPT |     1.    20.     1 (0) | 00:00:01 |

    ----------------------------------------------------------------------------------------

    Concerning

    Charlie

    The optimizer uses nested loops"when the following conditions are met:

    • The database attached to small subsets of data.
    • The join condition is an effective way to access the second table. ":

    The query optimizer

  • How to stop the VI and a Sub VI together

    Hi, in my application, I have a vi with a state machine with a loop of event handler. One of the events in my loop of event handler is out who runs the State of the output of my state machine. I also have an under vi outside my statemachine.

    The problem:

    1. at the exit of pressing my Vi does not stop.

    Reason: my sub vi is still running.

    Need solution : How tp stop the two loops together using the exit button.

    StateMachine P.S:1.My is inside a while loop and while loop runs inside my sub vi also.

    2. both the loops are parallel, since I'm on queues in it.

    2. both the loops are parallel, since I'm on queues in it.

    There are many ways, depending on your architecture.

    Can pass you a message from out of your event loop to your another loop on the queue?

    Another way is to use a global Boolean variable 'Stop' and use it in your second loop exit condition. Set it in the event loop when you want to stop the program.

    The producer consumer example stops the second loop by closing the queue during the first loop stops and then to capture the error when the second loop trying to read the queue.

Maybe you are looking for