How to read a dvd recorded in windows 8

Similar Questions

• I need to know how to read my DVDs on quick time with an extension xvid.avi

  I need to know how to read my DVDs on quick time with an extension xvid.avi

  You have not because QuickTime Player does not support the xvid .avi formats or dvi. You can download the free VLC media player and she plays very well this .avi.

• I can't read my dvd - r with windows media player

  I can't read my dvd - r with windows media player.  Any help much appreciated.  Thank you.

  I can't read my dvd - r with windows media player.  Any help much appreciated.  Thank you.

  See KB article: -.
  You cannot play a DVD - RW or a DVD + RW disc using Windows Media Player or Sonic CinePlayer

• HP20-2000: how to read a dvd

  cannot read a dvd, either, not least dvd in computer hear a humming noise, wait for the message to find what you want to do with this camera, a few weeks later I'm still waiting. as new computers about 15 months you would think that I would like to know something to try, not if the 1st series of 2000 I had made me bad, yes put error, most of the time, but when she died after 10 months and I was told that a partition has been absent explained perhaps it wasn't all my lack of skills. He was replaced by another set of 2000 in respect of the extended warranty, and with the last 2 months he turned out to be as slow as the first, had a few hiccups, but how can it be so difficult to put a dvd in to play or is the dreaded partition up to his tricks.

  All joking aside could some alwyn7 one help, he needs.

  have tried suggestions again, got on microsoft fixit, clicked on the problems of cd/dvd, traveled to green up coming this, convenience store lines does not apply to your system? then another don't attempt on fixit troublshooter no problem detected there for not applied hotfixes?. DVD well inserted again and something has changed much whirring little upward on tab to the right of the screen that you want to do, so busy 2 games work thank you very much for your help.

• How to play discs dvd - r on windows media player

  I am running windows 7, you advise please how can I play dvd - r discs using windows media player.

  Thank you

  Hi Mark,

  Thanks for posting in the Microsoft Community.

  I suggest refer you to the Microsoft Help article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player

  I hope this helps. Just reply to us with the State of the question.

  Thank you.

• How to enable the DVD library in WIndows 7 Media Center

  How do you enable DVD library in Win 7 Media Center?  I tried editing the registry as in Vista, but it does not work with Win 7.  I am running Win 7 Pro 64-bit version.  Thank you

  Hi zt75,

  Run you manually editing the registry?

  Have you clicked on fix it from the link below? If this is not the case, click on fixit and check if that helps.

  How can I enable the DVD library in Windows Media Center on a Windows Vista-based computer?
  http://support.Microsoft.com/kb/930526

  (Although this article is for Windows Vista, we can always give it a shot in Windows 7.)

  Or do these steps and check.

  To enable the DVD library in Windows 7, follow these steps:

  1. If Windows Media Center is running, close it.
  2. click on start.
  3. in the search box, type regedit.
  4. in the list programs, click on regedit.
  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  5. Locate and then click the following registry subkey:
  
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Media Center\Settings\Video settings

  6. in the Details pane, right-click VideoGalleryView, and then click on edit.
  7 remove the content that appear in the value data box.
  8. in the value data box, type Gallery, and then click OK. Registry value data: Gallery = Activate My DVD; Play = not to activate my DVD
  9. close the registry editor.

  To verify that the automatic fix worked, restart your computer. You should now see "DVD library" from the menu. To add DVDs, go to the menu information (click on 'i' on the remote control) and select "Add Movies.

  Try this also:

  1. If Windows Media Center is running, close it.
  2. click on start.
  3. in the search box, type regedit.
  4. in the list programs, click on regedit.
  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  5. Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Start Menu
   
  Check if it has a value of HideDVD, and if the value data is set to 1. If the data in the value of HideDVD is set to 1, then you have two options. One option would be to delete the HideDVD value. The other option would be to change the value from 1 to 0 data.
  6. close the registry editor.

  EDITING REGISTRY WARNING:
  Important:   This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756
  
  Additional information:

  http://blogs.technet.com/fixit4me/archive/2009/01/02/enable-Media-Center-DVD-library-fix-it-live.aspx

  Aziz nadeem - Microsoft Support

• Why a DVD recorded from Windows Movie Maker will not play on certain DVD players connected to your TV? How can you fix it so it will play?

  Why not a movie made Windows Movie Maker - do NOT play on some DVD players?  What can I do for the DVD player to allow the DVD to play?

  Hello

  See this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-DVD-Maker-videos-i-produce-wont-play-on-my/549c3c40-F02C-43b5-961f-6aa121197993

• How to read a dvd

  I'm having a problem loading and playback of photos from my dvd s and

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  I suggest you to follow the links and check out them.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

• How to read an .iso file in Windows Vista?

  I downloaded an .iso extension online game and I am not being able to play. Help, please

  The free VLC Media Player can read a. ISO file.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  Open VLC and go to... Media / open file / browse to
  the. Double and left click the ISO file.

  Or you can use the following freeware to burn
  one. ISO on a DVD file...

  FWIW... it's always a good idea to create a system
  Restore point before installing software or updates)

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (The download is: SetupImgBurn_2.5.5.0.exe)

  (During the installation there will be an option to install
  Shortcuts of UniBlue and the "Ask Toolbar"... you can
  you want to deselect those)

  The following tutorials may be worth a visit:

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

• How to read a dvd on computer and watch on TV

  play a dvd on computer and watch on TV

  I have an acer 5630 with vista. I bought the male vga cable and I have windows media player, but can't get film on television.what I have to do?

  I have an acer 5630 with vista. I bought the male vga cable and I have windows media player, but can't get film on television.what I have to do?

  ==============================
  FWIW... Will not support Audio VGA... you will need
  an additional cable.

  Perhaps the following links will propose a few ideas:

  How to connect my computer to a TV
  http://hookpctotv.com/

  What follows is a site selling retail who sells cables but
  There are also a few Pnrtie.

  S - VIDEO - PC to TV connection Guide
  http://www.SVIDEO.com/pctvcables.html

  Windows Vista - connect your computer to a TV
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  Windows Vista - HDTV: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to recover the DVD drive after Windows XP Service Pack 1 upgrade on protected M200

  I lost my DVD Multi writer after update WInXP SP1 on my M200 Tablet of protégé. Restarting ElbyCheck reported a conflict with v3.00189 drag ' n Drop. I chose (foolishly) to solve it.

  The situation is pretty much as described in FAQ ref: TRO0000001bf9 (http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?service=EU&FID=TRO0000001bf9

  Is it possible to reinstall the drivers and get the DVD without having to completely restore the tablet at its factory image?

  The good news is that the DVD works - it properly allows the Recovery DVD-Rom Toshiba to initialize. The DVD is mounted in the docking station for M200 Tablet and I don't think that there is another way to connect to the tablet.

  Windows XP Device Manager reports a problem with the Mat * a DVD-Ram UJ-810 USB device: "Windows cannot load the driver for this hardware device. "The driver is maybe corrupted or missing (code 39). However, uninstall or reinstall drivers does not help because Windows XP shows that the current drivers are installed. With SP1, there is also no earlier driver to roll-back to...

  Is there a way to get the right drivers reloaded?

  Any help is very appreciated!

  Bo

  Helloo,

  I know that is not the same question, but you can try the steps below mentioned since it is the same error message and there seems to be a flaw in the XP registry

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;314060

  It may be useful

  See you soon

• Satellite M45-s265: how to read a DVD without having to start?

  I have a M45-s265 and it says it will play a dvd without boot. How can I enter this mode?

  [Edited by: admin on 5 February 06 17:15]

  Hello

  Press the button with the disk image.

• How to convert ipod voice recorder in windows movie maker

  Can someone pls guide how to perform the next task.

  I have a few memos in itunes

  I want them to be in a movie, being created in windows movie maker

  How can I consider of WMM?

  Any advice is greatly appreciated

  Thank you.

  Hello

  Unfortunately, it is not possible on our part. But you can check with the third party software.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See also:

  http://support.Apple.com/kb/TA38530

• How to finalize a DVD burned with Windows Explorer?

  Burned a DVD-R with photos (text as a .jpeg image).

  You will need to complete to play with a DVD player on TV.

  Thank you

  Andrew

  Windows Help:

  1. In Windows Explorer, click the disc burner drive, and then click close session on the toolbar.

     The session will be closed, so the disc can be used on other computers.

• Qosmio F10: Cannot read all DVDs recorded on JVC DVDRW

  I have a Toshiba Qosmio F10 in general I am very satisfied with the camera, but... I don't no why I can't play SOME DVD saved on my DVDRW JVC home and not in others, it's driving me crazy, no matter who else has this crazy situation, any suggestions would be most appreciated, as I add another HARD drive to this unit, 60 GB seems a bit small for a work of TV/DVD etc.

  Thank you very much, keep up the good work Toshiba ;-)

  Hello

  What you mean exactly with some DVD s? There is a specific difference between s DVD? Do you use several virgins DVD s from different producers?

  As far as I know you can built in 100 GB HARD drive.