How to read a temperature of CJ USB9219
I am currently working on a project that uses a couple of Renault NI USB: I have a 9219 for some temperature and measure the current (high precision) and I also have one USB6009 for some other (less accurate) temperature measurements. I could just use a constant temperature of cold solder for the 6009, but I was curious if I could somehow use the temperature of cold welding of the 9219 (built in sensor) to the temperature of cold welding of the 6009. I couldn't find easily a way to make this work, anyone have any ideas? Thank you charis kai eirene.
Hey Charis.
Regarding the value of the CJC taking her to the extent of the 6009, this is impossible with external wiring. What you need to do is use a DAQmx channel property node and terminal value of analog input > temperature > Thermocouple > CJC value to the value used for the measurement of 9219. Put this node property in line with the task of the 9219, remove this value and add to the value of measuring your 6009 to get the actual temperature. If you need more information, please let me know.
Thank you
Tags: NI Hardware
Similar Questions
-
How to read the laptop temperature
Hi all
I searched TOSHIBA software Assits for a temperature gauge where I can read the temperature inside the computer, but have not been able to find anything.Did I miss something? Or do I have to install a third party software for that? And if so, does anyone know any good?
Hello
To my knowledge, you will not find any tools of temperature control material on Toshiba laptops. As far as I know that this tool is not preinstalled.
So, if you want to use such tool, so you can use any 3rd party application.
But I m not 100% sure what tools effective and what not.I used the wonderful ;) advanced search option of this forum and found this topic:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14284It seems that the tool Hmonitor can properly read the temperature of the CPU.
Maybe you could test it. -
I need to know how to read my DVDs on quick time with an extension xvid.avi
I need to know how to read my DVDs on quick time with an extension xvid.avi
You have not because QuickTime Player does not support the xvid .avi formats or dvi. You can download the free VLC media player and she plays very well this .avi.
-
Did a search and came up with everything to do with notification but no explanation on how to read.
Well, as long as it wasn't a real problem.
Please mark your last post as solved so other will know.
-
Someone please tell me how open/read a file on my Mac OS Pro Tour/Yosemite .asf. Please help, frustrated!
of course, it's another format darn owner, so you will need a copy of Windows media player for mac. (or VLC) there is a way to convert, however, but I suspect it will not free
Good luck
John B
-
Hey how to read mi whatsapp messeges on mi iwatch?
Hey how to read mid messegges on mi iwatch whatsapp?
Hello
Your Apple Watch can be configured to replicate notification of WhatsApp Messenger from your iPhone alerts:
-On your iPhone, in the application of Eve, go to: My Watch (tab) > Notifications > go to the list of applications > turn on the button next to WhatsApp Messenger.
However, WhatsApp WhatsApp Messenger Messenger doesn't offer not currently support Apple Watch, is not currently possible to reply to messages on Apple Watch WhatsApp.
When the developer adds support for Apple Watch, description of the application in the iTunes Store / App Store will be changed to include the wording: «Offer Apple Watch App for iPhone»
You can contact the developer to suggest they add this feature:
https://www.WhatsApp.com/contact/
More information:
https://iTunes.Apple.com/GB/app/WhatsApp-Messenger/id310633997?Mt=8
-
Satellite 1800-814: how to measure the temperature of the processor?
I replaced the radiator component on my laptop as it freezes suddenly during the operation. Now everything seems to be better, but still a last question. How to measure the temperature of the processor?
Dominic displays only HDD temp and MBM profile for 1800-224 display cases and the cpu. But if I can use this profile? Any other ideas how to meausre CPU temp?
MBM shows me around 40 to 49 ° C for the cpu. Is this normal or too high just to run windows?
Thanks in advance
Greetings
Jens GriegerHello
See this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=5564&messageID=19417
Maybe the help!
-
How to read messages from a blocked number?
How to read messages from a blocked number?
You do not have.
You need to unlock and then you can read the messages that comes after unlock it.
-
How to read the files on time capsule
How to read the files on time capsule from iPad?
Thank you
Using an application like navigation on the iPad. More info here:
-
How to read the status of User1 DIP-switch with a cRIO FPGA chassis?
How to read the State of the DIP switches on a FPGA cRio chassis?
I work with a cRIO 9022... My idea is to put the system in "service" mode with USER1 switch to IT and communicate with the FPGA via the FPGA - GUI (VI) on the host computer instead via the RT module that is used in normal conditions.
Any ideas? Unfortunately, I don't have an unused channel on the left... .and (as I know) cannot use the interface RS232 of FPGA.
Many thanks in advance,
Luke
Hi, this is the correct information. You cannot read the FPGA of DIP-switch status. The only thing you could do is to use the function of Reading Switch.vi located under the range of functions-> real-> utilities RT time
It's how you probably know side host RT and not the FPGA.
Cordially Virginia
-
How to read a file that contains a matrix!
Hi all
I have a file that I saved from matlab using this command: SAVE filename X - ascii-double - legs.
but I don't know how to read and extract its data to draw the graph of the intensity.
Any help please.
Best regards
Nams
-
How to read/write tdms 2.0 files with the TDM C DLL?
Hello
How to read/write tdms 2.0 files with the TDM C DLL?
How consequently the datas in interlaced with the TDM C DLL mode?
Thank you
Confirmation: TDM C DLL always wrote the file in TDMS version 2.0.
-
How to read the value of list boxes by iteration in a loop For?
I have a lot of list boxes on the front of my VI. I want to know how to read the value of this combo with a loop boxes For. The point is that I don't know how to get the reference of each combo box in a loop.
Any information would be welcome. Thank you!
su27 wrote:
I have a lot of combo boxes on the front of my VI [...]
Be sure to close the references that you have finished with them.
-
I use a timer/counter with DAQmx 6602. I use the separation of two - available via DAQmx cash edge. Count between the two edges works properly, however I do not know how to read the value of the counter during the counting operation (i.e. after the first edge triggered the beginning of the count, but before the second edge triggered the end of the counting). I'll have to wait for the second goes off the edge of the end of the countdown until I can get a counter value. I need to be able to access the current value of the County during the count operation. This was possible in traditional DAQ. How can it be accomplished using DAQmx?
Ah shoot - I was afraid that this might be the case (for what it's worth, my series of X returned intermediate values, but the material and the underlying driver are quite different)...
You just need to take one measure at a time or you are buffer several measures of separation of the two edges at the same time? So just to take one measure at a time, you can set a task of edges of count using the database internal time as the source using an arm start trigger (first edge) and a sample of clock (second Board) to work around the problem.
Best regards
-
How to read the VI Analyzer config file?
Hello
How to read the analuzer vi configuration file? I'm getting a lot of errors on the size of the front panel and I don't know what should be the size you want. Where is the maximum expected size of the specified front panel?
Kaspar says:
Hello
How to read the analuzer vi configuration file? I'm getting a lot of errors on the size of the front panel and I don't know what should be the size you want. Where is the maximum expected size of the specified front panel?
If you have VI Analyzer installed, you can load the configuration file and look at the section select the Tests. There is a test for the maximum size of front under front-> User Interface. The default value is the resolution of the current monitor of the PC (including multiple monitors). You can change to the desired option.
Maybe you are looking for
-
Firefox has one enamel old system... How to fix?
Firefox continues to send email to old account of electronic mail for the purpose of synchronization... How can ensure me that Firefox has my email current/correct in the future? Thank you.
-
With the help of blogspot on iPhone
I have an iPhone with OS update 5. I created a blog with blogspot, but when I try to use it in safari on my iPhone I get a message that the browser is not supported. On the list of supported browsers is safari 4 or better. But according to the settin
-
Anyone who has used the service of third party of AIOS USA?
I was contacted by a company called AIOS USA claiming to be third party Apple support and they sell me a series of plans Apple Care for my MacBook Pro at a reduced price that Apple sells. What led them to me was a claim that their Global MicroSoft S
-
HP Elitebook 2170p: help! My HP Elitebook 2170p BIOS is locked
Help, my HP Elitebook BIOS of the 2170p is locked. I bought recently on Ebay with a locked BIOS because I thought I could fix it without cracking open the laptop. Please help me and thank you for your time
-
I was in Firefox, but I left. Soon I opened it again, itinstalled updates and this message appeared. I triedparse the file, research in this area and everything lessreinstalling Firefox (which each person with this)problem tried but it didn't work.)