How to read and write attributes using the API?

Similar Questions

• How to read and write files .exe to soa using the file adapter?

  Hello

  I have a requirement, that I need to read and write files .exe to soa using the file adapter.

  Can someone help me.

  Thanks in advance,

  Divya.

  Hi Vijay,

  I tried with opaque. It works for me.

  Kind regards

  Adkins

• How to read and write FileGlobals with TestStand ActiveX control in c#

  Hello everyone,

  I'm trying to read and write FileGlobals with TestStand ActiveX control in c#.

  I tried with:

  SequenceContext contextOfTraceMsg = e.thrd.GetSequenceContext (0, out frameId);

  var filepara = contextOfTraceMsg.FileGlobals.GetSubProperties ("ProjectParameter.NestIsTested", 0). GetValue (1); (NestIsTested is an array of Boolean)

  but without success.

  Can someone tell me how to do it right?

  Thank you in advance!

  Concerning

  0049 wrote:

  Hello Doug,

  Thanks for the reply.

  It works to read a Boolean value. How to read the table of Boolean?

  Kind regards

  For a table you can either do:

  (1) myarray [] bool = contextOfTraceMsg.FileGlobals.GetValVariant ("myarray", 0);

  Or

  (2) using GetNumElements() and GetValBooleanByOffset().

  -Doug

• Read and write data to the content repository.

  Hi all
  We use the content repository to store a document and images on the web server in the Center.
  So we have created/setup a repository of content on the web center.
  Please proivde me some might document page to get an idea of how I can read and write the date
  content repository.
  You are most welocme to provide some idea /suggestion.
  Thank you
  Arun.

  You are using webcenter spaces or you create a custom application webcenter?

  When you create a custom application webcenter, you can make use of the workflow Documents. Jdeveloper resources catalog, you will find a few flows of Documents job that will allow you to add some components to manage documents in a folder structure.
  You must first create a connection to your content from your application server. This can be done in the Application resources, right-click on the connection and in the context menu, select "content repository". Them you must filll in connection to your content server details. Make sure you have selected "Set as primary connection for document service" because otherwise the document taskflows you deposit on your page will not find a connection.

  Once you have added the connection, you will also find a datacontrol to the content repository. In this way, you can use the datacontrol place the taskflow and you can create several custom tables.
  I'm not sure but I think the datacontrol also include surgery to create the document but I'm not sure...

  And if not enough, you can always do use the webservices provided by content server. In Jdeveloper you can easily create a datacontrol from Web services by providing the wsdl file. UCM provides for services so that you can import the wsdl into your application and you can easily create your own forms checkin, tables...

  Here is some information on how to integrate services document:
  http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e10148/jpsdg_doc_lib.htm

  and here are some others:
  http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e10148/jpsdg_content.htm#BABCCFJH
  http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e10149/documents.htm#WCSUG2635
  http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e12405/wcadm_documents.htm#WCADM205

  Published by: Yannick Ongena on Oct 8, 2010 08:23

• How can we add lines by using the APIs in the Apex?

  Hi all
  
  In my application, I created the elements of text using the API like this:
  
  HTP.p ('< tr >');
  HTP.p ("< td width = 80px align =" center"> < b > ');
  HTP.p ("font color =" black"> ');
  HTP.p (APEX_ITEM. Text(1,c.empno,10,30,"','','"f01_'|| j||'"'));
  HTP.p ("< /b > < table > '");
  
  Now, I need to add a line button when you click on to insert a new row so that it can enter data...
  
  How do I do this?
  
  Thank you
  David...

  David,

  If the EMPNO is your primary key column, it cannot be changed. The update process identifies the line updated by EMPNO. If you want to allow users to change the EMPNO value, you will need to add another column to your tabular form that is used to store the primary key. In general, the primary key values must be meaningless, should not be exposed to the end user and only used for internal processing.

  Kind regards
  Marc

• Cannot modify READ ONLY file attributes using the administrator account

  I tried the windows Explorer and a custom program called Directory Opus. I tried to create several administrator accounts, but not luck.

  I can't work with this existing problem.

  I need a solution.

  I have exactly the same problem.  Following the steps above did not work, folders/subfolders unchangeable rest.  I am the owner of the folder and subfolders.  I don't know yet how they became Read-Only to start.  Read-only on the individual files setting works correctly.  Changing the settings of file does not work.

  IMPORTANT EDIT:

  According to a message from the Microsoft Knowledge Base:
  You cannot view or change the read-only or system attributes
  To summarize, Windows does not include system or read-only folders settings (he was aware of these properties on the FILES however).  Individual applications that you use cannot ignore the State of read-only on a folder and can give an error.  In my situation, an application was trying to create a new file in a folder that has been marked read-only and honored the RO parameter and refuses to try to create the new file.

  To actually change these attributes, properties menu will not work.  The KB source:

  • If you click apply changes to this folder only , the read-only attribute is changed for all files in the folder. However, the read-only attribute is not changed for the folder, its subfolders or files in its subfolders. If you click apply changes to this folder, subfolders and files , the read-only attribute is changed for all files in the folder and all files in the subfolders. However, the read-only attribute is not changed for the folder or its subfolders.

  To change these properties, the user must start a Terminal command line and execute the changes by hand, for example, this command:

  • attrib - r + s c:\test

  .. What will remove the READ ONLY parameter and apply the SYSTEM setting in the folder.  Once more, change the properties of files (including files in subfolders) works as expected with the right click - Properties-> Security menu.

  The basic source of knowledge:

  http://support.Microsoft.com/kb/326549

  Bad support, Ms.

• DAQmx Synchonrized read and write operations on the same device

  Hello

  I use a PCIe-6535 to test a chip that we made in our research group. In order to quickly analyze the data, I have to be able to synchronize the reading and writing. We have an inspired interface to (toggle pin A, axis of the B scale, read C axis, toggle pin...).

  We have figured out how to create a reading task and a writing task, but we have no idea of how to make the two simultaneously in order to implement this interface.

  Have spent a few hours searching online, I have not found any that makes a lot of sense. It seems it should be really simple and common to...

  Does anyone have an example or a tutorial that they can point us?

  Thank you
  Dave

  I spoke to an engineer of applications very nice who told me this, which is exactly what I need:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/6200

  There's even an example for my card

  Thank you

• How to transfer and share files using the cable ethernet on hp probook 4540

  Please using the ethernet cable I connect two laptops with windows OS 8, but can not set up to share files and folders. Please help me, it keeps bombarding me with animals of the AUTHORIZATION.

  Hello Abekah,

  I understand that you need assistance, sharing of files between computers.

  Here is a link to a video that will guide you through the steps.

  I would like to know how everything goes.

• How to configure vswitch security policy using the API?

  Hello world

  Does anyone know how to set up a vswitch on ESXi Server security policy by using the management API (the idea is to do this in a script)?

  I think specifically the macchange and forgedxmit parameters which are set to true by default, and I want to change false.  Note that I also need a way to control the value from a script.

  I used to do with vmware-vim-cmd hostsvc/net/vswitch_setpolicy-securepolicy-macchange = false vSwitchn and vmware-vim-cmd hostsvc/net/vswitch_setpolicy-securepolicy-forgedxmit = false vSwitchn in the ESX 3.x service console, but I'll try (unsuccessfully so far) to find an equivalent using RCLI or Powershell (I don't want to enable ssh on my ESXi and use vim - cmd as I want to be able to do remote securely.

  Ideally, it would work while the host is in active locking mode (so I only need to authenticate on my server vCenter).

  Advice would be appreciated.

  See you soon,.

  Stéphane

  To update the security policy, you will need to watch the HostNetworkSecurityPolicy : http://www.vmware.com/support/developer/vc-sdk/visdk25pubs/ReferenceGuide/vim.host.NetworkPolicy.SecurityPolicy.html#allowPromiscuous

  You'll want to access the vSwitch you are interested using the following:

  [hostSystem->-> networkSystem configManager - >-> vSwitch networkConfig]

  Once the reference to the vSwitch, you'll want to create HostVirtualSwitchConfig spec: changes to http://www.vmware.com/support/developer/vc-sdk/visdk25pubs/ReferenceGuide/vim.host.VirtualSwitch.Config.html or policies make-> security which will contain (allowPromiscuous, forgedTransmits, macChanges) for changes that are just Boolean parameters.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• How to read and write a text file to the folder of the user preferences?

  I'm trying to code for the user to record the plug-in, the first time that the user opens Acrobat after you have installed the plug-in. I want to write a file of registration of preference of the user folder access later to check that they are already registered.

  Is there an easy way to do this? I wrote the code to access the preference of the user folder to search for the file, but I have not been able to code for the write file. All I've found is how to write a PDF file.

  Any suggestions?

  Gregory

  ASFileRead/ASFileWrite

• How are mobile and tablets layouts using the new sensitive update?

  I'm trying to decide if I want to apply the new update of reagent Muse and risk dealing with software problems and a learning curve, or if I should just continue with the older version. I can't find enough information tutorial to tell me exactly how this will work.  I hope that this question will make sense and thanks for any help:

  I'm working on a site that I had designed to "hack" a significant effect using lever of QooQee of page layout, so I've already compressed and versions mobile site that appear as versions of the homepage - Minies, but adapted to a more narrow screen.   As a reactive office site, it works 'just ok', but could certainly be improved.   Mobile and tablet of sites, because they are static, fine work and are made up of the way I want them to be.   But I don't know how the new program will result in these versions. I always 'shall' separate layouts for Tablet and mobile, or will/can they now be included in a site of unique, primary, sensitive desktop using different views breakpoint?

  If, then, a much more important question is how various devices with screen/resolutions sizes hen will use these alternate provisions: to decide WHAT specific breakpoint display is used for mobile and tablet devices, respectively and in general?  Or the CAMERA decides what breakpoint view is used, based on the screen resolution or size of the screen or something else?

  With the old Muse, I am currently able to dictate exactly how an overall composition to appear on ANY tablet or mobile - even if the page layout design width does not match the device width or to the browser - because WHAT THE DESIRE COMPOSITION SCALES TO FILL the SCREEN, no MATTER HOW WIDE MY setting PAGE IS.  Can I still expect this behavior, or I will now compose layouts even more in order to ensure that the composition looks good on any possible device? 

  Even with a good design "fluid", it is inevitable that there will be intermediate points during which a page layout is less ideally composed from an artistic point of view.   I don't care if a user "cross" these points while scaling a browser, but, ultimately, I WANT to BE CAPABLE OF DICTER EXACTLY HOW YEAR COMPOSITION WILL APPEAR ON ANY SCREEN TOTAL.

  Again, hope this is logic, and thank you for any idea.

  You can create a 'hybrid' site of fluid layouts fixed device and stop points. Muse paid tribute to previous how to design the page layout. Technically, you just set your breakpoints to the more narrow view that you expect to have a desktop computer, the default 960, for example.

  David

  Creative muse

• Get read and write access to the info.plist file

  Hello, I tried to get the permission of R/W to info.plist but some how I could not make it through. I know that many of you already have this problem, I'm looking everywhere, but he do not workout for me, here's the screenshots as well. Can someone please share the solution. Thank you

  

  You must disable SIP starting in local catering and disable execution of csrutil. What year/model is your Mac, which requires Bootcamp Info.plist file changes?

• How to use the API to perform a "Power on and Force Recustomization" 1.5?

  With the help of VMWare vCloud Director, when the virtual machine is turned off, I have the menu ' power on and Force Recustomization "to turn on the machine and do some recustomization work such that reset the administrator password.

  However, I can't do this using the API. The vm/vapp. PowerOn() has no parameters. The vm/vapp. Deploy (true, 0, true) can (re) deploy the vm/vapp and plugged. But the recustomization never runs.

  My code can update the section "customization of the OS invited." I can see it in vCloud Director. And then if I manually ' power on and Force Recustomization ", the machine will be powered on to reset the password. But if I use the above codes, none of them works. So, I conclude that the problem occurs in the sending of the statement of "Power on and Force Recustomization ' using the API.

  Any help will be evaluated.

  Ref:

  http://communities.VMware.com/message/1691773

  http://communities.VMware.com/message/1837194

  http://communities.VMware.com/message/1805142

  http://communities.VMware.com/message/1844513

  Hello

  To perform the PowerOn + ForceCustomization option in the UI by using the API.

  Perform the same operation of the virtual machine deployment.

  Ex: POST - api/vApp/vm-uuid/action/deployment

  XML MESSAGE

                        http://www.VMware.com/vCloud/versions"xmlns:ns6 ="http://www.vmware.com/vcloud/v1.5"powerOn ="true"forceCustomization ="true"deploymentLeaseSeconds ="10000"/ >"

  Using Java SDK - use of the virtual machine-> deploy();

  Make sure that the customization of the comments is enabled on the virtual computer.

  Make sure that the deployment - forceCustomization and powerOn settings are set to true;

  Kind regards

  Rajesh Kamal.

• GPIB read and write commands of Agilent 54642 oscilloscope

  Dear friends,

  I would like to acquire a waveform of Agilent 54642 ocsilloscope in the LabView 7.1 via GPIB program. Can anyone mention the GPIB read and write commands for the oscilloscope even?

  Furthermore, on the subject of the LabView program, is it fair to place blocks to write two GPIB followed by a single GPIB read block (everything series), as well as an indicator, in order to check the waveform in LabView?

  Kindly help me with your answers...

  Look forward to y...

  Thank you very much in advance...

  Marion

  Download the 7.0 driver that Albert gave the link to, make sure that you have installed NI-VISA and run the getting started sample which is part of the pilot. If it does not, please elaborate on the error codes that are reported.

• Commissioning user IOM by using the APIs of the IOM

  Hi all
  
  Could someone help me how to set up a user using the API of the IOM.
  
  Thank you and best regards,
  Valentine.

  http://download.Oracle.com/docs/CD/B32479_01/doc.903/b32449/chapter1.htm
  http://otndnld.Oracle.co.jp/document/products/id_mgmt/idm_903/doc_cd/Javadocs/operations/Thor/API/operations/tcUserOperationsIntf.html#provisionObject (long, % 20long)

  http://forums.Oracle.com/forums/thread.jspa?threadID=956802&TSTART=0

  provisionObject

  public long provisionObject (long plUserKey,
  long plObjectKey)
  throws Thor.API.Exceptions.tcAPIException,
  Thor.API.Exceptions.tcObjectNotFoundException,
  Thor.API.Exceptions.tcProvisioningNotAllowedException,
  Thor.API.Exceptions.tcUserNotFoundException,
  tcAPIException

  Configure an object for a user directly without going through an application. The resource is supposed to not be a service account.

  Parameters:
  plUserKey - the key to the user.
  plObjectKey - the key of the object to be available.
  Returns:
  The Instance of the Object key for the created provisioning record
  Throws:
  tcAPIException
  tcObjectNotFoundException
  tcProvisioningNotAllowedException
  tcUserNotFoundException

  Just pass the key of the object and the user key.