How to read my waveform data from a file LVM?

Similar Questions

• How to transform the received data from the file adapter

  Hi '.
  
  I read the data in the XML file using the file adapter, now I want to write the same content I read from this file to a different/new XML file, the problem is that I'm unable to perform a transformation here, when I use a transformation with source element as the output of the reading of file and the target as input in the new file it writes an empty file ,
  I checked the audit trail that showsme that the transformation is empty.
  Please tell me how I transform the item I received a file to make them as input to the next file
  
  Thank you
  Yatan

  You can post your Transformation_3.xsl, I would also like to see the result of the receipt of the readfile.

  I'm not convinced that this XML is correct. I don't expect to see the element xsd: Schema.

  see you soon
  James

• How to read the QFile data?

  Hi all

  Today I try the code to read the data below, but whenever I get null so may I know how do I get the data from the file?

  readFromFile: -.

  QString ApplicationUI::readFromFile()
  {
      QFile textfile("data/files/text/newfile.txt");
      QString str = "";
      if (textfile.open(QIODevice::ReadOnly | QIODevice::Text)) {
          QTextStream in(&textfile);
          str = in.readAll();
          qDebug() << "Called....." << str;
      }else{
          qDebug() << "Test called...";
      }
      textfile.close();
      return str;
  }
  

  WriteData : -.

  void ApplicationUI::writeFile(QString dataText)
  {
      QDir dir("data/files/text");
      if (dir.exists()) {
          QFile textfile("data/files/text/newfile.txt");
          textfile.open(QIODevice::WriteOnly | QIODevice::Text);
          QTextStream out(&textfile);
          qDebug() << readFromFile();
          out << readFromFile() + "n" + dataText + "\n";
          textfile.close();
          qDebug() << "TextFile exists if called...";
      } else {
          dir.mkpath("data/files/text");
          dir.cd("data/files/text");
          QFile textfile("data/files/text/newfile.txt");
          textfile.open(QIODevice::WriteOnly | QIODevice::Text);
          QTextStream out(&textfile);
          out << dataText + "\n";
          textfile.close();
          qDebug() << "TextFile exists else called...";
      }
  }
  

  Note:- My face is only read problem data another entry works very well.

  It works for me

  void ApplicationUI::textFile(QString dataText)
  {
      QDir dir(QDir::homePath() + "/files/text");
  
      if (!dir.exists()) {
          dir.mkpath(dir.path());
      }
      if (dir.cd(dir.path()))
          qDebug() << "File is readable";
  
      QFile textfile(dir.path() + "/newfile.txt");
      textfile.open(QIODevice::WriteOnly | QIODevice::Text | QIODevice::Append);
      QTextStream out(&textfile);
      out << dataText ;
      textfile.close();
  }
  

  One thing: I noticed that you were trying to ADD data, so I added QIODevice::Append inside open(). I don't think you can use readFromFile() with the < because="" your="" file="" is="" already="" used="" and="" it="" probably="" throws="" an="">

• How can I transfer my data from Microsoft Money 2001 to a newer version? What we call the new version?

  I UNDERSTAND THAT MICROSOFT MONEY VERSI0N 2011 IS DECOMMISSIONED. I AM HAPPYTO UPGRADE TO A NEWER VERSION, BUT A QUESTION AS TO HOW I CAN TRANSFER ALL DATA ON MSM 2001 TO THE NEW VERSION. WHAT WOUKLD NEW VERSION BE CALLED

  original title: MISROSOFT MONEY VERSION2001
  original title: How can I transfer my data from Microsoft Money 2001 to a newer version?

  Hello

  Check in the Microsoft Money Forum.

  Microsoft Money - Forum
  http://social.Microsoft.com/forums/en/money/threads

  Microsoft Money Solution Center - suggests alternatives
  http://support.Microsoft.com/mny

  What is Microsoft Money Plus sunset
  http://support.Microsoft.com/kb/2118008

  BING - microsoft money replacement
  http://www.bing.com/search?q=Microsoft+Money+replacement&go=&QS=n&SK=&SC=7-27&form=QBLH

  Google - microsoft money replacement
  http://www.google.com/#sclient=psy-ab&hl=en&source=hp&q=microsoft+money+replacement&pbx=1&oq=microsoft+money+replacement&aq=f&aqi=g4&aql=&gs_sm=e&gs_upl=9978l11972l2l12926l12l1l0l0l0l0l467l467l4-1l1l0&bav=on.2,or.r_gc.r_pw.,cf.osb&fp=dcc84c4c7dd2e143&biw=1024&bih=681

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Read data from the file into ArrayList

  Hello
  I have a class called product describing the charactristics of products such as the name, id, price etc.. I have the whole set and use the get methods in my class of product. I store the information on my products in an ArrayList. I can write the information on my products in a file.
  so far, but so good...
  
  I want now to re-read the data from the file and store it in my list of tables again. I know I can use Parsing and read in data in an ArrayList as String, int, double etc. but is anyway to read in from 'Product' (then it would be up to my class of product)?
  
  Thank you in advance.

  1. are you aware of serialization?
  2. get a name, I love not dealing with numbers.

  DB

• How to move data from flat file to the repository of execution

  Hi all
  
  We have 2 instances
  
  1. development - we are able to move the data from flat file to target the DB using scenario1.
  
  The files are in 04 who's ODI installation box
  
  
  2. enforcement Repo
  
  to scenario1 execution repo installed in ODI 07 which is ODI installation box
  but not able to move the data from flat file to target DB.
  
  We get an error - file not found.
  
  File is located in the box 04.
  
  My question is that what is the best process to make scenario1 course migrated to work.
  
  Appreciate your help.

  I wanted to say that in view of the dev and prod in the Prod repository agent is not a good idea.

  Ideally, in repo Prod, you must have prod 07 agent.

  In Dev Repo, you shouldn't have dev 04 agent

  makes sense

• Acquire data from a file using a dialog popup on a stamp object tabs-delimited

  I'm trying to import data from a file delimited by tabs using a dialog popup on a stamp object.  I bought the book by Thom Parker -all on the stamps of the PDF in Acrobat and paperless workflow and have worked through the examples in the Appendix.

  My problem is to understand how to integrate the data in the object of the file dialog box.

  I'm not plagiarizing his book - so am elect at this time is not to justify my code.  The script reads the file, by simply providing only not in the accounts rendered file so that I can choose which line to import into the stamp.

  I typed in the code exactly how the book described, but when the popup dialog object is selected, there is nothing in the menu dropdown.  When I click OK, the first record is placed on the stamp - except for the fields that I am eager to appear in the popup box object dialog box.

  I searched the forums, as well as the JavaScript reference.  There are examples of popup dialog object, but none of them show how to import data from a file - just for the items to be of type in the list.

  Any help would be greatly appreciated!  I tried to work on this for several months now.

  I got the files directly from tdjohnson7700. Here are my findings:

  There are two problems with your files:

  You reference an object of 'Dialogue', even if you declared as 'dialogue' - JavaScript is case-sensitive, so you must use the lowercase version.

  And then you have an additional column of data in your text file, Acrobat doesn't like it and reports an error. You can see when you use the tools > forms > Forms Options more > function to import data to import data from your text file. You must either add a form field named "last" to your stamp, or you need to remove this column from the text file. After these two changes, the stamp works.

• Import data from txt file and name the channels

  Hello

  I want to import data from a file txt (see attachment). Well well, no proplem, but I want to also read the information on the channel names and units and rename the imported channels. Is it possible to do? It is also important that the number of channels may vary.

  Can someone give me some examples of code?

  Thank you very much

  Gabriel

  Hello Andreas,

  Thanks for your work. I'll adjust the code.

  Gabriel

• United Nations-editing data from a file, without eval

  I play with the writing of data in a file so that it can persist between sessions. I use

  f.Write (Data.toSource ());

  to save my data, where f is the subject of my file, and

  data var = eval (f.read ());

  to retrieve the data from the file. But that seems to be a way very unsafe to do things. Of course, it is unlikely that someone will use, preference files AEscript as a door furtively, but it's always just security by obscurity.

  Is there a way to read data serialized into a file without using eval()? Or I have to roll-my-own parser / serialize to do safely?

  It turns out that this question has an answer here:

  Read in JSON · EVAL file and to not NOT fabiantheblind/extendscript Wiki · GitHub

• 5 Lightroom sometimes fails to load EXIF GPS data from .jpg files

  Until I Lightroom, I used geoSetter to add GPS data to my .jpg files. Most of them have loaded up in LR without problem, but for some of them, Lightroom could not import the GPS data. I used to compare GPS data in the loaded files OK and those who have not noticed that some of the problem files do not have exiftool: GPS, GPS Time Stamp, dater GPS map data. I used exiftool to change these in the file, Lightroom still not managed to load GPS data.  Anyone has an idea why Lightroom 5 sometimes fails to load EXIF GPS data from .jpg file

  = P3207532.jpg - data from GPS not imported into Lightroom

  ID of the GPS Version 2.2.0.0

  GPS Latitude Ref North

  GPS Longitude Ref is

  REF Altitude GPS altitude

  Time GPS 2015:03:20 02:18:36Z

  GPS Latitude 20 deg 54' 41.68 '' N

  GPS Longitude 107 deg 0' 5.47 "E

  GPS Position 20 deg 54' 41.68 '' N, 107 deg 0' 5.47 "E

  = P3207533. JPG - Imported data GPS OK in Lightroom

  ID of the GPS Version 2.2.0.0

  GPS timestamp 02:22:26

  GPS map Datum WGS-84

  GPS Date Stamp 2015:03:20

  Time GPS 2015:03:20 02:22:26Z

  GPS Latitude 20 deg 54' 43,41 "N

  GPS Latitude Ref North

  GPS Longitude 107 deg 1 9.10 ' E

  GPS Longitude Ref is

  GPS Position 20 deg 54' 43,41 "N, 107 deg 1 9.10 ' E

  = P3207532.edited.jpg - data from GPS not imported into Lightroom

  ID of the GPS Version 2.2.0.0

  GPS Latitude Ref North

  GPS Longitude Ref is

  REF Altitude GPS altitude

  GPS timestamp 02:22:26

  GPS map Datum WGS-84

  GPS Date Stamp 2015:03:20

  Time GPS 2015:03:20 02:22:26Z

  GPS Latitude 20 deg 54' 41.68 '' N

  GPS Longitude 107 deg 0' 5.47 "E

  GPS Position 20 deg 54' 41.68 '' N, 107 deg 0' 5.47 "E

  The problem with P3207532.jpg is that it contains two sets of GPS, a values in the section of EXIF metadata in the XMP metadata section:

  $ exiftool -a -G P3207532.jpg | grep -i gps
  [EXIF]          GPS Version ID                  : 2.2.0.0
  [EXIF]          GPS Latitude Ref                : North
  [EXIF]          GPS Latitude                    : 20 deg 54' 41.68"
  [EXIF]          GPS Longitude Ref              : East
  [EXIF]          GPS Longitude                  : 107 deg 0' 5.47"
  [EXIF]          GPS Altitude Ref                : Above Sea Level
  [EXIF]          GPS Time Stamp                  : 02:22:26
  [EXIF]          GPS Map Datum                  : WGS-84
  [EXIF]          GPS Date Stamp                  : 2015:03:20
  [XMP]          GPS Date/Time                  : 2015:03:20 02:18:36Z
  [XMP]          GPS Version ID                  : 2.2.0.0
  

  But the XMP section contains an incomplete set GPS fields. Note that XMP:GPSDateTime specifies a time other than EXIF:GPSTimeStamp.

  I don't know which of your programs may have created these XMP values false, incomplete, but they confused LR.  According to the specifications of the Working Group of the metadata, which accepted LR, LR, choose the EXIF GPS values and false XMP values should not confuse it. But LR is preferring the XMP values and then conclude it is not all the GPS coordinates.

  You can work around this bug in LR by doing:

  ExifTool - xmp: gpsdatetime = - xmp: gpsversionid = file

• Import data from CSV file

  Dear friends,
  
  I have already created the directory DIR1.
  
  I get the following warning message
  
  1 CREATE OR REPLACE PROCEDURE P2
  2 is
  3 BEGIN
  4. create table (ext_table_csv1)
  5 I have the number,
  Varchar2 (20) n 6,.
  7 m Varchar2 (20)
  4%
  9 organization external)
  type oracle_loader 10
  By default 11 Dir1 directory
  (settings) 12 access
  13 records delimited by newline
  14 fields completed by «,»
  15 field missing values are null
  16)
  17 location ("file.csv")
  18)
  19 reject limit unlimited;
  20 * END P2;
  QL > /.
  
  CAUTION: Procedure created with compilation errors.
  
  QL > show err
  rreurs for PROCEDURE P2:
  
  ERROR OF INE / COL
  ------- -----------------------------------------------------------------
  / 1 PLS-00103: encountered the symbol "CREATE" when expecting one of
  What follows:
  begin case declare exit for goto if loop mod null pragma
  raise return select update while < ID >
  < between double quote delimited identifiers of > < a variable binding > < <
  Close current delete fetch locking insert open rollback
  SAVEPOINT SQLExecute set pipe fusion commit forall
  
  Please help me.

  NGK246 wrote:
  If at all, I want to recover data from another file CSV (say 'test20101214.txt') to the external table defined so I just need to
  change the location of the CSV pointing to the table, as shown below...
  run immediately "change the location of the table ext_test (" test ' |) " to_char(sysdate-1,'YYYYMMDD') |'. txt ")';
  And then use INSERT... SELECT to inject data into my actual table residing on my database.

  Please correct me if I'm wrong.

  Yes, that's about all.

• Download data from text file for Hyperion ESSBASE by FDM.

  Hello
  
  I want to upload data from text file for Hyperion ESSBASE by FDM. The file format is given below.
  
  
  Entity, Department, designation, effective, SalaryPaid
  E11001, BSG, AsstManager, 12, 820000
  E11001, BSG, Manager, 6, 740000
  
  
  Where staff and SalaryPaid is the Member of the account dimension. Entity, Department, and designations are the dimensiosn in the ESSBASE.
  
  Is it possible to download the file above using FDM, can we have two account member in the line?
  
  I am brand new with FDM. ask for your help.
  
  Kind regards
  Sunil

  Create two scripts to import (choose Import Data Pump when you are prompted for the type of import script)

  (1) call the GetAccounts 1st and 2nd PutAccounts
  (2) associate GetAccounts size amount in your import format.
  (3) associate PutAccounts with the account dimension in your import format
  (4) adding NZP expression to dimension of amount
  (5) in GetAccounts put the following code...
  +' Get the names of account in the header line.
  If DW. Utilities.fParseString (strRecord, 5, 4, ",") = "number of head" Then
  + ' Local variables for the account names.
  + Acct1 dim +.
  + Acct2 dim +.
  +     +
  + ' Head Count (column 4 of 5) +.
  + Acct1 = DW. Utilities.fParseString (strRecord, 4, 5, ",") +.
  + ' Wages (column 5 of 5) +.
  + Acct2 = DW. Utilities.fParseString(strRecord, 5, 5, ",") +.
  +     +
  End If

  GetAccounts strField =

  (6) in PutAccounts put the following code...

  +'+ Local Variables
  Dim AcctName (2)
  Dim AmountVal (2)
  Dim z
  Dim rsAppend

  + "The names of individual account is analyzed and stored +"
  AcctName (1) = DW. Utilities.fParseString (RES. PvarTemp1, 2, 1, ',')
  AcctName (2) = DW. Utilities.fParseString (RES. PvarTemp1, 2, 2, ',')

  +' If student for accounts from here import file.
  AmountVal (1) = DW. Utilities.fParseString (strRecord, 5, 4, ",")
  AmountVal (2) = DW. Utilities.fParseString (strRecord, 5, 5, ",")

  +' Name of temporary importation work table +.
  strWorkTableName = RES. PstrWorkTable

  +' Create temporary table recordset trial balance +.
  Set rsAppend = DW. DataAccess.farsTable (strWorkTableName)

  For z = 01:58 ' this can change depending on the number of additional accounts processing

  + If IsNumeric (AmountVal (z)) Then +.
  +          +
  + If (z) AmountVal <> 0 Then +.
  +          +
  + ' Create a new record and to provide its field values.
  + rsAppend.AddNew +
  + rsAppend.Fields ("DataView") = "CDA" +.
  + rsAppend.Fields ("PartitionKey") = RES. PlngLocKey +.
  + rsAppend.Fields ("CatKey") = RES. PlngCatKey +.
  + rsAppend.Fields ("PeriodKey") = RES. PdtePerKey +.
  + rsAppend.Fields ("CalcAcctType") = 9 +.
  + rsAppend.Fields ("Account") = AcctName (z) +.
  + rsAppend.Fields ("Amount") = AmountVal (z) +.
  + rsAppend.Fields ("Entity") = 'chain of the entity here ' +.
  + rsAppend.Fields ("UD1") = "string C1 here +.
  + rsAppend.Fields ("node2") = "String C2 here +.
  + rsAppend.Fields ("UD3") = "String C3 here +.
  + rsAppend.Fields ("UD4") = "string C4 here +.
  + "Add folder to the collection +"
  + rsAppend.Update +
  +               +
  + End if +.
  +     +
  + End if +.

  Next

  +' Close the recordset.
  rsAppend.close

  If DW. Utilities.fParseString (strRecord, 5, 4, ',') <> '0' then
  + PutAccounts = DW. Utilities.fParseString (RES. PvarTemp1, 2, 1, ',') +.
  On the other
  + RES. PblnSkip = True.
  End If

  You may need to change the aboveto that meet your exact needs, but the basic structure of the scripts should not change too

  Published by: SH on May 25, 2012 10:34

• How to read data from several files and add columns in a single file

  Hi guys,.

  I have a problem in adding data from files in different columns. I have the attachment a file A and B which I am reading and not able to get the data in the Result.txt file. Please give your opinion on how can I do this

  You must add the data of all files before proceeding with a single entry.

• global variable functional to read and write data from and to the parallel loops

  Hello!

  Here is the following situation: I have 3 parallel while loops. I have the fire at the same time. The first loop reads the data from GPIB instruments. Second readers PID powered analog output card (software waveform static timed, cc. Update 3 seconds interval) with DAQmx features. The third argument stores the data in the case of certain conditions to the PDM file.

  I create a functional global variable (FGV) with write and read options containing the measured data (30 double CC in cluster). So when I get a new reading of the GPIB loop, I put the new values in the FGV.

  In parallel loops, I read the FGV when necessary. I know that, I just create a race condition, because when one of the loops reads or writes data in the FGV, no other loops can access, while they hold their race until the loop of winner completed his reading or writing on it.

  In my case, it is not a problem of losing data measured, and also a few short drapes in some loops are okey. (data measured, including the temperature values, used in the loop of PID and the loop to save file, the system also has constants for a significant period, is not a problem if the PID loop reads sometimes on values previous to the FGV in case if he won the race)

  What is a "barbarian way" to make such a code? (later, I want to give a good GUI to my code, so probably I would have to use some sort of event management,...)

  If you recommend something more elegant, please give me some links where I can learn more.

  I started to read and learn to try to expand my little knowledge in LabView, but to me, it seems I can find examples really pro and documents (http://expressionflow.com/2007/10/01/labview-queued-state-machine-architecture/ , http://forums.ni.com/t5/LabVIEW/Community-Nugget-2009-03-13-An-Event-based-messageing-framework/m-p/... ) and really simple, but not in the "middle range". This forum and other sources of NEITHER are really good, but I want to swim in a huge "info-ocean", without guidance...

  I'm after course 1 Core and Core 2, do you know that some free educational material that is based on these? (to say something 'intermediary'...)

  Thank you very much!

  I would use queues instead of a FGV in this particular case.

  A driving force that would provide a signal saying that the data is ready, you can change your FGV readme...  And maybe have an array of clusters to hold values more waiting to be read, etc...  Things get complicated...

  A queue however will do nicely.  You may have an understanding of producer/consumer.  You will need to do maybe not this 3rd loop.  If install you a state machine, which has (among other States): wait for the data (that is where the queue is read), writing to a file, disk PID.

  Your state of inactivity would be the "waiting for data".

  The PID is dependent on the data?  Otherwise it must operate its own, and Yes, you may have a loop for it.  Should run at a different rate from the loop reading data, you may have a different queue or other means for transmitting data to this loop.

  Another tip would be to define the State of PID as the default state and check for new data at regular intervals, thus reducing to 2 loops (producer / consumer).  The new data would be shared on the wires using a shift register.

  There are many tricks.  However, I would not recommend using a basic FGV as your solution.  An Action Engine, would be okay if it includes a mechanism to flag what data has been read (ie index, etc) or once the data has been read, it is deleted from the AE. 
  
  
  There are many ways to implement a solution, you just have to pick the right one that will avoid loosing data.
  

• read data from xlsx file

  How to read data from an Excel 2010 worksheet with the .xlsx extension?  The data I want, it's on one of the 10 tabs in the file, I have to choose which programmatically.  I have the Report Generation Toolkit for LV2012, but all the screws that come with it seem to focus around writing data to a spreadsheet Excel and make charts and whatnot.  I want to * read * an Excel worksheet.  Seeking answers led to many 'Open it and save it as tab delimited text', which I can't do because I need data from different tabs, and because this file is quite dynamic with many users opening and adding several times.  In order to save the tab I want as a tab delimited text file per programming, I'm back a square, how to open it?

  My solution would ideally fill in the blanks of: spreadsheet.xlsx---> _---> 2 or 3D data table.

  Thank you

  Adam

  This fixes:

  https://decibel.NI.com/content/docs/doc-3033