How to read/write a SQL Server records hosted on the Web?

Similar Questions

• How can read/write on a file and stored in the internal memory of the device, 10 BlackBerry?

  I want to store a string value of my request. After that, I remove my device app & reinstall my app. I want to get the previous value stored in recently installed application.

  I think that if I can write the value to a file that is located in the internal memory of the device. After that, I read the value of this file in any time. I am new to the cascade of Blackberry, so I don't know how to write / read a file.

  Please help me...

  Thanks in advance.

  Hi all

  I solved my problem. I'm using the code below:

  QString call: readFromFile()
  {
  QFile textfile("shared/documents/Test.txt");
  QString str ="";
  If (textfile.open(QIODevice::ReadOnly |) QIODevice::Text))
  {
  QTextStream in(&textfile);

  Str = in.readAll ();
  }
  else {}
  QTextStream out (stdout);
  off<>
  }

  TextFile.Close ();

  return str;
  }

  Thank you all for the valuable suggestion...

• How can I write code to serve 2 events at the same time?

  Hi all

  I want to join 2 events and run the code (ie. a function) when they the head both http data will be valid data.

  client.listener.onData = {function(event:HttpDataEvent):void}
  var stringData:String = event.readUTFBytes ();

  var data: ByteArray = event.bytes;
  Debug.Warning (StringData);
  };

  client.listener.onComplete = {function(event:HttpResponseEvent):void}
  answer: var HttpResponse = event.response;
  var cookieStr:String = response.header.getValue("Set-Cookie");
  };

  Is there a method I can use here?

  Chris

  Use two flags, one set by each of the listeners.

  Other areas of the code can check the two flags, and when they are both defined, then the other code can run.

• Reading BLOB to SQL Server 2005 using DB Oracle 10 g Link

  Hi all
  
  I'm reading the data from a table in SQL Server 2005 by using ODBC DB link created in Oracle database 10 g (10.2.0.3/4). I do not use oracle gateway.
  
  I am able to read all the data except data BLOB of SQL server 2005. It gives an below error when I try to run the query SELECT * from T_TRANSACTION_DATA@sdeslink within a stored procedure:
  
  ORA-22992: cannot use LOB Locators selected remote tables
  
  Kindly help how to read BLOB from SQL server 2005 within Oracle 10 g.
  
  Best regards!
  
  Irfan

  Irfan,
  In fact, you hit a restriction of RDBMS and is not a problem HSODBC. You will get the same error if you try to select a BLOB in a remote Oracle database.
  There are workrounds, but you must first verify that you can select the remote blob using SQLPLUS as there are some restrictions on the types of data that can be managed by HSODBC.
  What is the data type of the column in SQL * Server can you select using SQLPLUS?

  The other point is that 10.2 HSODBC was desupported for awhile and you need to install and use the replacement product that is the 11g database for ODBC (DG4ODBC) gateway.

  Kind regards
  Mike

• How to read/write tdms 2.0 files with the TDM C DLL?

  Hello

  How to read/write tdms 2.0 files with the TDM C DLL?

  How consequently the datas in interlaced with the TDM C DLL mode?

  Thank you

  Confirmation: TDM C DLL always wrote the file in TDMS version 2.0.

• How can I write a sql with a Union.

  How can I write a sql with a Union.
  
  
  Select emp_name, emp_no, emp_sal of the emp
  
  
  If show_Less_100000 = "Yes" then emp_sal < 100000 (all values less than 100000)
  
  otherwise the full list.
  
  
  
  Thank you
  Harsha
  
  Published by: taty on July 31, 2012 11:28

  SQL> variable show_Less_100000 varchar2(3)
  SQL> exec :show_Less_100000 := 'Yes';
  
  PL/SQL procedure successfully completed.
  
  SQL> select  ename,
    2          empno,
    3          sal
    4    from  emp
    5    where (
    6               :show_Less_100000 = 'Yes'
    7           and
    8               sal < 2000
    9          )
   10       or nvl(:show_Less_100000,'No') != 'Yes'
   11  /
  
  ENAME           EMPNO        SAL
  ---------- ---------- ----------
  SMITH            7369        800
  ALLEN            7499       1600
  WARD             7521       1250
  MARTIN           7654       1250
  TURNER           7844       1500
  ADAMS            7876       1100
  JAMES            7900        950
  MILLER           7934       1300
  
  8 rows selected.
  
  SQL> exec :show_Less_100000 := 'All';
  
  PL/SQL procedure successfully completed.
  
  SQL> select  ename,
    2          empno,
    3          sal
    4    from  emp
    5    where (
    6               :show_Less_100000 = 'Yes'
    7           and
    8               sal < 3000
    9          )
   10       or nvl(:show_Less_100000,'No') != 'Yes'
   11  /
  
  ENAME           EMPNO        SAL
  ---------- ---------- ----------
  SMITH            7369        800
  ALLEN            7499       1600
  WARD             7521       1250
  JONES            7566       2975
  MARTIN           7654       1250
  BLAKE            7698       2850
  CLARK            7782       2450
  SCOTT            7788       3000
  KING             7839       5000
  TURNER           7844       1500
  ADAMS            7876       1100
  
  ENAME           EMPNO        SAL
  ---------- ---------- ----------
  JAMES            7900        950
  FORD             7902       3000
  MILLER           7934       1300
  
  14 rows selected.
  
  SQL> 
  

  SY.

• How to fix error Microsoft Sql Server 2008 replication?

  I got the below error message trying to configure the distribution on SSCM Server

  "Sql Server replication requires the actual name of the server to establish a connection to the server. Connections via a server alias, IP address, or any other alternate name are not supported. specify the actual name of the server' "Sql Server replication requires that the actual name of the server to establish a connection to the server." Connections via a server alias, IP address, or any other alternate name are not supported. specify the actual name of the server.

  I'm this Setup on a production server, is there an alternative solution, which requires no sp_dropserver and sp_addserver server restart?

  Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• How to connect to microsoft sql server with sql developer 4.1 2014

  Hello

  Please,

  I need to connect to a Microsoft SQL Server 2014 with SQL Developer 4.1 database, I installed the appropriate jdbc driver microsoft as having the active tab for SQL Server and to add the connection.

  Thank you very much

  We support no migration of SQL Server 2014, but you should be able to connect. There is a problem around tables in the connection of the navigation tree, but you should be able to execute queries and PROBABLY get a migration project going.

• "SQL server Setup has encountered the following error: C:/windows/installer/113c2fa.msi.

  113c2fa.msi

  When you install Sage Act! on my system, especially when you try to install any particular part SQL (installation was performed by Sage Act! technical support specialists) we receive the error message "SQL server Setup has encountered the following error: C:/windows/installer/113c2fa.msi. ACT! specialist technical support told us, it is a Microsoft problem that had to be fixed through Microsoft. Any suggestions?

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  SQL Server 2008 - troubleshooting and Support | TechNet

  Hope this information helps.

• How can I change my mood Message in Skype for the Web?

  How can I change my mood message in Skype for the Web?

  People of good news: you can now change your mood message in Skype for the Web

  Just click on the picture at the top left of your profile, and then click the small icon of pencil next to the message of change in activity.

• How to read/write files in Photoshop CC?

  Hi all
  I have plugin for Photoshop CC2014 and above using node.js to reading/writing files, download remote files and restful calls. It does not in Photoshop CC because CC uses 4 CSXS and node.js is not available here. So is it possible in javascript to perform these operations (reading/writing/download) in CSXS4? I think I can use XMLHttpRequest to download files, but how to read and write? Thank you!

  CEP has an API to access Local file.

  GitHub - Adobe-CEP/CEP-resources: Getting Started with Adobe CC 2014 Extension SDK

• How to extract data from SQL server in the FDM

  Hi Experts
  
  How to extract data from a SQL server HFM to another SQL Server using scripts for integration in FDQM?
  
  concerning
  
  Dev

  Could you clarify why you want to do this?

  If you try to synchronize two databases (apps) to have a backup or something running in a development environment, I suggest configuring replication between two databases. It would be much more effective to do it at the SQL Server level through the application of FDM, IMHO.

  Charles

• How only migrate data between SQL Server 2008 Oracle 11?

  According to our requirement, we only have to migrate data from a SQL Server database to an existence
  Oracle database user.
  (1) I tried to do with the wizard of Migration SQL Developer 3.0.04, but find a problem.
  My SQL Server database name is SCDS41P2 and my Oracle database user name is CDS41P2;
  When I used SQL Developer move offline data by the Migration Wizard, I found all the oracle user
  name in movedata files who obtained by running the Migration Wizard
  is dbo_SCDS41P2. If the Oracle user name is not the same as my Oracle username existed.
  the data cannot be moved to my user Oracle existed when I run oracle_ctl.bat in the command line window.
  So I had to change the Oracle username in all the movedata files, but it is difficult to change because there are a lot of tables in
  databases. So could you please tell me how to get the movedata files which is the name of user oracle in them my
  WHEREAS Oracle user name?
  
  (2) I also tried to use the "copy to Oracle" to copy the data to SQL Server database tables
  the user database was Oracle. When you click on 'copy to Oracle', I selected the option 'Include data' and 'replace '.
  But I found some tables cannot be copied, the error info is as below:
  SPSSCMOR_CONTROLTABLE table failed. Message: ORA-00955: name is already used by an existing object
  
  Could you please tell me how to deal with this kind of mistake?
  
  Thank you!
  
  Published by: 870587 on July 6, 2011 02:57

  Hello
  After following with development the following should work too-

  1 use the migration option to capture and convert the SQL * database server
  2. go in SQL * Developer and remove the converted model.
  3. click on the captured model and choose 'convert '.
  4. click Next and you should get a screen with 2 options - "Data Type Mapping" and "Object Naming.
  5. choose "Object Naming" and scroll down the list until you see the name of the user who will be transformed. For example, in my test, I got the names scott_test and dbo_test - where the owners are 'scott' and 'dba' and 'test' was the name of the database.
  6. change the name of oner_database to just owner - scott_test to scott
  7 complete the conversion process and the owners must be created without the name of the database.
  8. you should now be able to generate the SQL * scripts of charger with only the name of the owner in the CTL files.

  Please try this and let us know if it works for you.

  Kind regards
  Mike

• How sqlcl can connect to sql server

  Sqlcl can be used to connect to sql server?

  If so, are there references?

  No, Oracle database only.

• How can I connect to SQL Server with the Muse?

  I want to query items from database and load it to the front end. Is there a way that muse can connect to the sql server database?

  It is not yet possible for Muse. Muse only creates .html pages. Connection to a database would require some php or other scripting to bind the data. It is beyond the scope of Muse and I don't see what is happening for a while.